blob: 0ea6fcb82c094d38854ab8849aab5510eaa143ad [file] [log] [blame]
Luka Perkov9b914722012-09-05 08:01:25 +00001/*
2 * (C) Copyright 2009-2012
3 * Wojciech Dubowik <wojciech.dubowik@neratec.com>
Luka Perkov3fdf7592012-12-03 03:24:15 +00004 * Luka Perkov <luka@openwrt.org>
Luka Perkov9b914722012-09-05 08:01:25 +00005 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Luka Perkov9b914722012-09-05 08:01:25 +00007 */
8
9#ifndef _CONFIG_ICONNECT_H
10#define _CONFIG_ICONNECT_H
11
12/*
Luka Perkov9b914722012-09-05 08:01:25 +000013 * High level configuration options
14 */
15#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
Luka Perkov9b914722012-09-05 08:01:25 +000016#define CONFIG_KW88F6281 /* SOC Name */
17#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
18
19/*
Luka Perkov9b914722012-09-05 08:01:25 +000020 * Compression configuration
21 */
22#define CONFIG_BZIP2
23#define CONFIG_LZMA
24#define CONFIG_LZO
25
26/*
27 * Commands configuration
28 */
29#define CONFIG_SYS_NO_FLASH /* declare no flash (NOR/SPI) */
30#define CONFIG_SYS_MVFS
Luka Perkov9b914722012-09-05 08:01:25 +000031#define CONFIG_CMD_ENV
Luka Perkov9b914722012-09-05 08:01:25 +000032#define CONFIG_CMD_NAND
Luka Perkov9b914722012-09-05 08:01:25 +000033
34/*
35 * mv-common.h should be defined after CMD configs since it used them
36 * to enable certain macros
37 */
38#include "mv-common.h"
39
Luka Perkov9b914722012-09-05 08:01:25 +000040/*
41 * Environment variables configuration
42 */
43#ifdef CONFIG_CMD_NAND
44#define CONFIG_ENV_IS_IN_NAND
45#define CONFIG_ENV_SECT_SIZE 0x20000
46#else
47#define CONFIG_ENV_IS_NOWHERE
48#endif
49#define CONFIG_ENV_SIZE 0x20000
50#define CONFIG_ENV_OFFSET 0x80000
51
52/*
53 * Default environment variables
54 */
55#define CONFIG_BOOTCOMMAND \
56 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
57 "ubi part rootfs; " \
Joe Hershberger949a7712012-11-01 16:54:18 +000058 "ubifsmount ubi:rootfs; " \
Luka Perkov9b914722012-09-05 08:01:25 +000059 "ubifsload 0x800000 ${kernel}; " \
60 "bootm 0x800000"
61
62#define CONFIG_MTDPARTS \
63 "mtdparts=orion_nand:" \
64 "0x80000@0x0(uboot)," \
65 "0x20000@0x80000(uboot_env)," \
66 "-@0xa0000(rootfs)\0"
67
68#define CONFIG_EXTRA_ENV_SETTINGS \
69 "console=console=ttyS0,115200\0" \
70 "mtdids=nand0=orion_nand\0" \
71 "mtdparts="CONFIG_MTDPARTS \
72 "kernel=/boot/uImage\0" \
73 "bootargs_root=noinitrd ubi.mtd=2 root=ubi0:rootfs rootfstype=ubifs\0"
74
75/*
76 * Ethernet driver configuration
77 */
78#ifdef CONFIG_CMD_NET
79#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
80#define CONFIG_PHY_BASE_ADR 11
81#undef CONFIG_RESET_PHY_R
82#endif /* CONFIG_CMD_NET */
83
84/*
85 * File system
86 */
Luka Perkov9b914722012-09-05 08:01:25 +000087#define CONFIG_CMD_JFFS2
Luka Perkov9b914722012-09-05 08:01:25 +000088#define CONFIG_CMD_UBIFS
89#define CONFIG_RBTREE
90#define CONFIG_MTD_DEVICE
91#define CONFIG_MTD_PARTITIONS
92#define CONFIG_CMD_MTDPARTS
93
94#endif /* _CONFIG_ICONNECT_H */