blob: 80701e298cf8d40d77ab5ac641e4c4fd49fe4929 [file] [log] [blame]
Jin Zhengxiong4782ac82006-08-23 19:10:44 +08001/*
2 * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved.
3 * Author: Jason Jin<Jason.jin@freescale.com>
4 * Zhang Wei<wei.zhang@freescale.com>
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
22 * MA 02111-1307 USA
23 *
24 */
25#ifndef _AHCI_H_
26#define _AHCI_H_
27
28#define AHCI_PCI_BAR 0x24
29#define AHCI_MAX_SG 56 /* hardware max is 64K */
30#define AHCI_CMD_SLOT_SZ 32
31#define AHCI_RX_FIS_SZ 256
32#define AHCI_CMD_TBL_HDR 0x80
33#define AHCI_CMD_TBL_CDB 0x40
34#define AHCI_CMD_TBL_SZ AHCI_CMD_TBL_HDR + (AHCI_MAX_SG * 16)
35#define AHCI_PORT_PRIV_DMA_SZ AHCI_CMD_SLOT_SZ + AHCI_CMD_TBL_SZ \
36 + AHCI_RX_FIS_SZ
37#define AHCI_CMD_ATAPI (1 << 5)
38#define AHCI_CMD_WRITE (1 << 6)
39#define AHCI_CMD_PREFETCH (1 << 7)
40#define AHCI_CMD_RESET (1 << 8)
41#define AHCI_CMD_CLR_BUSY (1 << 10)
42
43#define RX_FIS_D2H_REG 0x40 /* offset of D2H Register FIS data */
44
45/* Global controller registers */
46#define HOST_CAP 0x00 /* host capabilities */
47#define HOST_CTL 0x04 /* global host control */
48#define HOST_IRQ_STAT 0x08 /* interrupt status */
49#define HOST_PORTS_IMPL 0x0c /* bitmap of implemented ports */
50#define HOST_VERSION 0x10 /* AHCI spec. version compliancy */
51
52/* HOST_CTL bits */
53#define HOST_RESET (1 << 0) /* reset controller; self-clear */
54#define HOST_IRQ_EN (1 << 1) /* global IRQ enable */
55#define HOST_AHCI_EN (1 << 31) /* AHCI enabled */
56
57/* Registers for each SATA port */
58#define PORT_LST_ADDR 0x00 /* command list DMA addr */
59#define PORT_LST_ADDR_HI 0x04 /* command list DMA addr hi */
60#define PORT_FIS_ADDR 0x08 /* FIS rx buf addr */
61#define PORT_FIS_ADDR_HI 0x0c /* FIS rx buf addr hi */
62#define PORT_IRQ_STAT 0x10 /* interrupt status */
63#define PORT_IRQ_MASK 0x14 /* interrupt enable/disable mask */
64#define PORT_CMD 0x18 /* port command */
65#define PORT_TFDATA 0x20 /* taskfile data */
66#define PORT_SIG 0x24 /* device TF signature */
67#define PORT_CMD_ISSUE 0x38 /* command issue */
68#define PORT_SCR 0x28 /* SATA phy register block */
69#define PORT_SCR_STAT 0x28 /* SATA phy register: SStatus */
70#define PORT_SCR_CTL 0x2c /* SATA phy register: SControl */
71#define PORT_SCR_ERR 0x30 /* SATA phy register: SError */
72#define PORT_SCR_ACT 0x34 /* SATA phy register: SActive */
73
74/* PORT_IRQ_{STAT,MASK} bits */
75#define PORT_IRQ_COLD_PRES (1 << 31) /* cold presence detect */
76#define PORT_IRQ_TF_ERR (1 << 30) /* task file error */
77#define PORT_IRQ_HBUS_ERR (1 << 29) /* host bus fatal error */
78#define PORT_IRQ_HBUS_DATA_ERR (1 << 28) /* host bus data error */
79#define PORT_IRQ_IF_ERR (1 << 27) /* interface fatal error */
80#define PORT_IRQ_IF_NONFATAL (1 << 26) /* interface non-fatal error */
81#define PORT_IRQ_OVERFLOW (1 << 24) /* xfer exhausted available S/G */
82#define PORT_IRQ_BAD_PMP (1 << 23) /* incorrect port multiplier */
83
84#define PORT_IRQ_PHYRDY (1 << 22) /* PhyRdy changed */
85#define PORT_IRQ_DEV_ILCK (1 << 7) /* device interlock */
86#define PORT_IRQ_CONNECT (1 << 6) /* port connect change status */
87#define PORT_IRQ_SG_DONE (1 << 5) /* descriptor processed */
88#define PORT_IRQ_UNK_FIS (1 << 4) /* unknown FIS rx'd */
89#define PORT_IRQ_SDB_FIS (1 << 3) /* Set Device Bits FIS rx'd */
90#define PORT_IRQ_DMAS_FIS (1 << 2) /* DMA Setup FIS rx'd */
91#define PORT_IRQ_PIOS_FIS (1 << 1) /* PIO Setup FIS rx'd */
92#define PORT_IRQ_D2H_REG_FIS (1 << 0) /* D2H Register FIS rx'd */
93
94#define PORT_IRQ_FATAL PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_ERR \
95 | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_ERR
96
97#define DEF_PORT_IRQ PORT_IRQ_FATAL | PORT_IRQ_PHYRDY \
98 | PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE \
99 | PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS \
100 | PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS \
101 | PORT_IRQ_D2H_REG_FIS
102
103/* PORT_CMD bits */
104#define PORT_CMD_ATAPI (1 << 24) /* Device is ATAPI */
105#define PORT_CMD_LIST_ON (1 << 15) /* cmd list DMA engine running */
106#define PORT_CMD_FIS_ON (1 << 14) /* FIS DMA engine running */
107#define PORT_CMD_FIS_RX (1 << 4) /* Enable FIS receive DMA engine */
108#define PORT_CMD_CLO (1 << 3) /* Command list override */
109#define PORT_CMD_POWER_ON (1 << 2) /* Power up device */
110#define PORT_CMD_SPIN_UP (1 << 1) /* Spin up device */
111#define PORT_CMD_START (1 << 0) /* Enable port DMA engine */
112
113#define PORT_CMD_ICC_ACTIVE (0x1 << 28) /* Put i/f in active state */
114#define PORT_CMD_ICC_PARTIAL (0x2 << 28) /* Put i/f in partial state */
115#define PORT_CMD_ICC_SLUMBER (0x6 << 28) /* Put i/f in slumber state */
116
117#define AHCI_MAX_PORTS 32
118
119/* SETFEATURES stuff */
120#define SETFEATURES_XFER 0x03
121#define XFER_UDMA_7 0x47
122#define XFER_UDMA_6 0x46
123#define XFER_UDMA_5 0x45
124#define XFER_UDMA_4 0x44
125#define XFER_UDMA_3 0x43
126#define XFER_UDMA_2 0x42
127#define XFER_UDMA_1 0x41
128#define XFER_UDMA_0 0x40
129#define XFER_MW_DMA_2 0x22
130#define XFER_MW_DMA_1 0x21
131#define XFER_MW_DMA_0 0x20
132#define XFER_SW_DMA_2 0x12
133#define XFER_SW_DMA_1 0x11
134#define XFER_SW_DMA_0 0x10
135#define XFER_PIO_4 0x0C
136#define XFER_PIO_3 0x0B
137#define XFER_PIO_2 0x0A
138#define XFER_PIO_1 0x09
139#define XFER_PIO_0 0x08
140#define XFER_PIO_SLOW 0x00
141
142#define ATA_FLAG_SATA (1 << 3)
143#define ATA_FLAG_NO_LEGACY (1 << 4) /* no legacy mode check */
144#define ATA_FLAG_MMIO (1 << 6) /* use MMIO, not PIO */
145#define ATA_FLAG_SATA_RESET (1 << 7) /* (obsolete) use COMRESET */
146#define ATA_FLAG_PIO_DMA (1 << 8) /* PIO cmds via DMA */
147#define ATA_FLAG_NO_ATAPI (1 << 11) /* No ATAPI support */
148
149struct ahci_cmd_hdr {
150 u32 opts;
151 u32 status;
152 u32 tbl_addr;
153 u32 tbl_addr_hi;
154 u32 reserved[4];
155};
156
157struct ahci_sg {
158 u32 addr;
159 u32 addr_hi;
160 u32 reserved;
161 u32 flags_size;
162};
163
164struct ahci_ioports {
165 u32 cmd_addr;
166 u32 scr_addr;
167 u32 port_mmio;
168 struct ahci_cmd_hdr *cmd_slot;
169 struct ahci_sg *cmd_tbl_sg;
170 u32 cmd_tbl;
171 u32 rx_fis;
172};
173
174struct ahci_probe_ent {
175 pci_dev_t dev;
176 struct ahci_ioports port[AHCI_MAX_PORTS];
177 u32 n_ports;
178 u32 hard_port_no;
179 u32 host_flags;
180 u32 host_set_flags;
181 u32 mmio_base;
182 u32 pio_mask;
183 u32 udma_mask;
184 u32 flags;
185 u32 cap; /* cache of HOST_CAP register */
186 u32 port_map; /* cache of HOST_PORTS_IMPL reg */
187 u32 link_port_map; /*linkup port map*/
188};
189
190#endif