blob: ae5402e8431c9698a0fad0d1250aa1b830ff459a [file] [log] [blame]
wdenk43d96162003-03-06 00:02:04 +00001/*
2 * (C) Copyright 2002
3 * Robert Schwebel, Pengutronix, r.schwebel@pengutronix.de
4 * Kyle Harris, Nexus Technologies, Inc., kharris@nexus-tech.net
5 * Marius Groeger, Sysgo Real-Time Solutions GmbH, mgroeger@sysgo.de
6 *
7 * See file CREDITS for list of people who contributed to this
8 * project.
9 *
10 * This program is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of
13 * the License, or (at your option) any later version.
14 *
15 * This program is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * You should have received a copy of the GNU General Public License
21 * along with this program; if not, write to the Free Software
22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
23 * MA 02111-1307 USA
24 */
25
26#include <common.h>
27#include <asm/arch/pxa-regs.h>
wdenk47cd00f2003-03-06 13:39:27 +000028#include <asm/mach-types.h>
wdenk43d96162003-03-06 00:02:04 +000029
30#ifdef CONFIG_SHOW_BOOT_PROGRESS
31# define SHOW_BOOT_PROGRESS(arg) show_boot_progress(arg)
32#else
33# define SHOW_BOOT_PROGRESS(arg)
34#endif
35
wdenk47cd00f2003-03-06 13:39:27 +000036/**
37 * i2c_init_board - reset i2c bus. When the board is powercycled during a
38 * bus transfer it might hang; for details see doc/I2C_Edge_Conditions.
39 * The Innokom board has GPIO70 connected to SCLK which can be toggled
40 * until all chips think that their current cycles are finished.
wdenk43d96162003-03-06 00:02:04 +000041 */
wdenkdc7c9a12003-03-26 06:55:25 +000042int i2c_init_board(void)
wdenk47cd00f2003-03-06 13:39:27 +000043{
wdenkdc7c9a12003-03-26 06:55:25 +000044 int i, icr;
wdenk47cd00f2003-03-06 13:39:27 +000045
wdenkdc7c9a12003-03-26 06:55:25 +000046 /* disable I2C controller first, otherwhise it thinks we want to */
47 /* talk to the slave port... */
48 icr = ICR; ICR &= ~(ICR_SCLE | ICR_IUE);
wdenk8bde7f72003-06-27 21:31:46 +000049
wdenkdc7c9a12003-03-26 06:55:25 +000050 /* set gpio pin low _before_ we change direction to output */
wdenk3e386912003-04-05 00:53:31 +000051 GPCR(70) = GPIO_bit(70);
wdenk8bde7f72003-06-27 21:31:46 +000052
wdenkdc7c9a12003-03-26 06:55:25 +000053 /* now toggle between output=low and high-impedance */
54 for (i = 0; i < 20; i++) {
55 GPDR(70) |= GPIO_bit(70); /* output */
wdenk47cd00f2003-03-06 13:39:27 +000056 udelay(10);
wdenkdc7c9a12003-03-26 06:55:25 +000057 GPDR(70) &= ~GPIO_bit(70); /* input */
wdenk47cd00f2003-03-06 13:39:27 +000058 udelay(10);
59 }
wdenkdc7c9a12003-03-26 06:55:25 +000060
61 ICR = icr;
62
63 return 0;
wdenk47cd00f2003-03-06 13:39:27 +000064}
65
66
67/**
68 * misc_init_r: - misc initialisation routines
69 */
70
71int misc_init_r(void)
72{
73 uchar *str;
74
75 /* determine if the software update key is pressed during startup */
76 if (GPLR0 & 0x00000800) {
77 printf("using bootcmd_normal (sw-update button not pressed)\n");
78 str = getenv("bootcmd_normal");
79 } else {
80 printf("using bootcmd_update (sw-update button pressed)\n");
81 str = getenv("bootcmd_update");
82 }
83
84 setenv("bootcmd",str);
85
86 return 0;
87}
wdenk43d96162003-03-06 00:02:04 +000088
89
90/**
91 * board_init: - setup some data structures
92 *
93 * @return: 0 in case of success
94 */
95
96int board_init (void)
97{
98 DECLARE_GLOBAL_DATA_PTR;
99
100 /* memory and cpu-speed are setup before relocation */
101 /* so we do _nothing_ here */
102
wdenk47cd00f2003-03-06 13:39:27 +0000103 gd->bd->bi_arch_number = MACH_TYPE_INNOKOM;
wdenk43d96162003-03-06 00:02:04 +0000104 gd->bd->bi_boot_params = 0xa0000100;
wdenkdc7c9a12003-03-26 06:55:25 +0000105 gd->bd->bi_baudrate = CONFIG_BAUDRATE;
106
wdenk43d96162003-03-06 00:02:04 +0000107 return 0;
108}
109
110
111/**
112 * dram_init: - setup dynamic RAM
113 *
114 * @return: 0 in case of success
115 */
116
117int dram_init (void)
118{
119 DECLARE_GLOBAL_DATA_PTR;
120
121 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
122 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
123
124 return 0;
125}
126
127
128/**
129 * innokom_set_led: - switch LEDs on or off
130 *
131 * @param led: LED to switch (0,1,2)
132 * @param state: switch on (1) or off (0)
133 */
134
135void innokom_set_led(int led, int state)
136{
137 switch(led) {
138/*
139 case 0: if (state==1) {
140 GPCR0 |= CSB226_USER_LED0;
141 } else if (state==0) {
142 GPSR0 |= CSB226_USER_LED0;
143 }
144 break;
145
146 case 1: if (state==1) {
wdenk8bde7f72003-06-27 21:31:46 +0000147 GPCR0 |= CSB226_USER_LED1;
148 } else if (state==0) {
149 GPSR0 |= CSB226_USER_LED1;
150 }
151 break;
wdenk43d96162003-03-06 00:02:04 +0000152
153 case 2: if (state==1) {
wdenk8bde7f72003-06-27 21:31:46 +0000154 GPCR0 |= CSB226_USER_LED2;
155 } else if (state==0) {
156 GPSR0 |= CSB226_USER_LED2;
157 }
158 break;
wdenk43d96162003-03-06 00:02:04 +0000159*/
160 }
161
162 return;
163}
164
165
166/**
167 * show_boot_progress: - indicate state of the boot process
168 *
169 * @param status: Status number - see README for details.
170 *
171 * The CSB226 does only have 3 LEDs, so we switch them on at the most
172 * important states (1, 5, 15).
173 */
174
175void show_boot_progress (int status)
176{
177 switch(status) {
178/*
179 case 1: csb226_set_led(0,1); break;
180 case 5: csb226_set_led(1,1); break;
181 case 15: csb226_set_led(2,1); break;
182*/
183 }
184
185 return;
186}