blob: 34fe038608500c412f186bfba39607e9b189fcf5 [file] [log] [blame]
Tor Krillf1352652008-05-29 10:40:17 +02001/*
Albert ARIBAUDfa82f872011-08-04 18:45:45 +02002 * Copyright (C) Excito Elektronik i Skåne AB, All rights reserved.
Tor Krillf1352652008-05-29 10:40:17 +02003 * Author: Tor Krill <tor@excito.com>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
18 * MA 02111-1307 USA
19 *
20 * This is a driver for Silicon Image sil3114 sata chip modelled on
21 * the ata_piix driver
22 */
23
24#include <common.h>
25#include <pci.h>
26#include <command.h>
27#include <config.h>
28#include <asm/byteorder.h>
29#include <asm/io.h>
30#include <ide.h>
31#include <libata.h>
32#include "sata_sil3114.h"
33
34/* Convert sectorsize to wordsize */
35#define ATA_SECTOR_WORDS (ATA_SECT_SIZE/2)
36
37/* Forwards */
38u8 sil3114_spin_up (int num);
39u8 sil3114_spin_down (int num);
40static int sata_bus_softreset (int num);
41static void sata_identify (int num, int dev);
42static u8 check_power_mode (int num);
43static void sata_port (struct sata_ioports *ioport);
44static void set_Feature_cmd (int num, int dev);
45static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits,
46 unsigned int max, u8 usealtstatus);
47static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus);
48static void msleep (int count);
49
50static u32 iobase[6] = { 0, 0, 0, 0, 0, 0}; /* PCI BAR registers for device */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020051extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
Tor Krillf1352652008-05-29 10:40:17 +020052
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020053static struct sata_port port[CONFIG_SYS_SATA_MAX_DEVICE];
Tor Krillf1352652008-05-29 10:40:17 +020054
55static void output_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
56{
57 while (words--) {
58 __raw_writew (*sect_buf++, (void *)ioaddr->data_addr);
59 }
60}
61
62static int input_data (struct sata_ioports *ioaddr, u16 * sect_buf, int words)
63{
64 while (words--) {
65 *sect_buf++ = __raw_readw ((void *)ioaddr->data_addr);
66 }
67 return 0;
68}
69
70static int sata_bus_softreset (int num)
71{
72 u8 status = 0;
73
74 port[num].dev_mask = 1;
75
76 port[num].ctl_reg = 0x08; /*Default value of control reg */
77 writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
78 udelay (10);
79 writeb (port[num].ctl_reg | ATA_SRST, port[num].ioaddr.ctl_addr);
80 udelay (10);
81 writeb (port[num].ctl_reg, port[num].ioaddr.ctl_addr);
82
83 /* spec mandates ">= 2ms" before checking status.
84 * We wait 150ms, because that was the magic delay used for
85 * ATAPI devices in Hale Landis's ATADRVR, for the period of time
86 * between when the ATA command register is written, and then
87 * status is checked. Because waiting for "a while" before
88 * checking status is fine, post SRST, we perform this magic
89 * delay here as well.
90 */
91 msleep (150);
92 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 300, 0);
93 while ((status & ATA_BUSY)) {
94 msleep (100);
95 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 3, 0);
96 }
97
98 if (status & ATA_BUSY) {
Kim Phillips369d0aa2009-02-18 17:43:59 -060099 printf ("ata%u is slow to respond,plz be patient\n", num);
Tor Krillf1352652008-05-29 10:40:17 +0200100 }
101
102 while ((status & ATA_BUSY)) {
103 msleep (100);
104 status = sata_chk_status (&port[num].ioaddr, 0);
105 }
106
107 if (status & ATA_BUSY) {
Kim Phillips369d0aa2009-02-18 17:43:59 -0600108 printf ("ata%u failed to respond : ", num);
Tor Krillf1352652008-05-29 10:40:17 +0200109 printf ("bus reset failed\n");
110 port[num].dev_mask = 0;
111 return 1;
112 }
113 return 0;
114}
115
116static void sata_identify (int num, int dev)
117{
118 u8 cmd = 0, status = 0, devno = num;
119 u16 iobuf[ATA_SECTOR_WORDS];
120 u64 n_sectors = 0;
121
122 memset (iobuf, 0, sizeof (iobuf));
123
124 if (!(port[num].dev_mask & 0x01)) {
125 printf ("dev%d is not present on port#%d\n", dev, num);
126 return;
127 }
128
129 debug ("port=%d dev=%d\n", num, dev);
130
131 status = 0;
132 cmd = ATA_CMD_ID_ATA; /*Device Identify Command */
133 writeb (cmd, port[num].ioaddr.command_addr);
134 readb (port[num].ioaddr.altstatus_addr);
135 udelay (10);
136
137 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 1000, 0);
138 if (status & ATA_ERR) {
139 printf ("\ndevice not responding\n");
140 port[num].dev_mask &= ~0x01;
141 return;
142 }
143
144 input_data (&port[num].ioaddr, iobuf, ATA_SECTOR_WORDS);
145
146 ata_swap_buf_le16 (iobuf, ATA_SECTOR_WORDS);
147
148 debug ("Specific config: %x\n", iobuf[2]);
149
150 /* we require LBA and DMA support (bits 8 & 9 of word 49) */
151 if (!ata_id_has_dma (iobuf) || !ata_id_has_lba (iobuf)) {
152 debug ("ata%u: no dma/lba\n", num);
153 }
154#ifdef DEBUG
155 ata_dump_id (iobuf);
156#endif
157 n_sectors = ata_id_n_sectors (iobuf);
158
159 if (n_sectors == 0) {
160 port[num].dev_mask &= ~0x01;
161 return;
162 }
163 ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].revision,
164 ATA_ID_FW_REV, sizeof (sata_dev_desc[devno].revision));
165 ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].vendor,
166 ATA_ID_PROD, sizeof (sata_dev_desc[devno].vendor));
167 ata_id_c_string (iobuf, (unsigned char *)sata_dev_desc[devno].product,
168 ATA_ID_SERNO, sizeof (sata_dev_desc[devno].product));
169
170 /* TODO - atm we asume harddisk ie not removable */
171 sata_dev_desc[devno].removable = 0;
172
173 sata_dev_desc[devno].lba = (u32) n_sectors;
Marek Vasut5779a9e2011-10-21 14:17:23 +0000174 debug("lba=0x%lx\n", sata_dev_desc[devno].lba);
Tor Krillf1352652008-05-29 10:40:17 +0200175
176#ifdef CONFIG_LBA48
177 if (iobuf[83] & (1 << 10)) {
178 sata_dev_desc[devno].lba48 = 1;
179 } else {
180 sata_dev_desc[devno].lba48 = 0;
181 }
182#endif
183
184 /* assuming HD */
185 sata_dev_desc[devno].type = DEV_TYPE_HARDDISK;
186 sata_dev_desc[devno].blksz = ATA_SECT_SIZE;
187 sata_dev_desc[devno].lun = 0; /* just to fill something in... */
188}
189
190static void set_Feature_cmd (int num, int dev)
191{
192 u8 status = 0;
193
194 if (!(port[num].dev_mask & 0x01)) {
195 debug ("dev%d is not present on port#%d\n", dev, num);
196 return;
197 }
198
199 writeb (SETFEATURES_XFER, port[num].ioaddr.feature_addr);
200 writeb (XFER_PIO_4, port[num].ioaddr.nsect_addr);
201 writeb (0, port[num].ioaddr.lbal_addr);
202 writeb (0, port[num].ioaddr.lbam_addr);
203 writeb (0, port[num].ioaddr.lbah_addr);
204
205 writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
206 writeb (ATA_CMD_SET_FEATURES, port[num].ioaddr.command_addr);
207
208 udelay (50);
209 msleep (150);
210
211 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0);
212 if ((status & (ATA_BUSY | ATA_ERR))) {
213 printf ("Error : status 0x%02x\n", status);
214 port[num].dev_mask &= ~0x01;
215 }
216}
217
218u8 sil3114_spin_down (int num)
219{
220 u8 status = 0;
221
222 debug ("Spin down disk\n");
223
224 if (!(port[num].dev_mask & 0x01)) {
225 debug ("Device ata%d is not present\n", num);
226 return 1;
227 }
228
229 if ((status = check_power_mode (num)) == 0x00) {
230 debug ("Already in standby\n");
231 return 0;
232 }
233
234 if (status == 0x01) {
235 printf ("Failed to check power mode on ata%d\n", num);
236 return 1;
237 }
238
239 if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) {
240 printf ("Device ata%d not ready\n", num);
241 return 1;
242 }
243
244 writeb (0x00, port[num].ioaddr.feature_addr);
245
246 writeb (0x00, port[num].ioaddr.nsect_addr);
247 writeb (0x00, port[num].ioaddr.lbal_addr);
248 writeb (0x00, port[num].ioaddr.lbam_addr);
249 writeb (0x00, port[num].ioaddr.lbah_addr);
250
251 writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
252 writeb (ATA_CMD_STANDBY, port[num].ioaddr.command_addr);
253
254 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0);
255 if ((status & (ATA_BUSY | ATA_ERR))) {
256 printf ("Error waiting for disk spin down: status 0x%02x\n",
257 status);
258 port[num].dev_mask &= ~0x01;
259 return 1;
260 }
261 return 0;
262}
263
264u8 sil3114_spin_up (int num)
265{
266 u8 status = 0;
267
268 debug ("Spin up disk\n");
269
270 if (!(port[num].dev_mask & 0x01)) {
271 debug ("Device ata%d is not present\n", num);
272 return 1;
273 }
274
275 if ((status = check_power_mode (num)) != 0x00) {
276 if (status == 0x01) {
277 printf ("Failed to check power mode on ata%d\n", num);
278 return 1;
279 } else {
280 /* should be up and running already */
281 return 0;
282 }
283 }
284
285 if (!((status = sata_chk_status (&port[num].ioaddr, 0)) & ATA_DRDY)) {
286 printf ("Device ata%d not ready\n", num);
287 return 1;
288 }
289
290 debug ("Stautus of device check: %d\n", status);
291
292 writeb (0x00, port[num].ioaddr.feature_addr);
293
294 writeb (0x00, port[num].ioaddr.nsect_addr);
295 writeb (0x00, port[num].ioaddr.lbal_addr);
296 writeb (0x00, port[num].ioaddr.lbam_addr);
297 writeb (0x00, port[num].ioaddr.lbah_addr);
298
299 writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
300 writeb (ATA_CMD_IDLE, port[num].ioaddr.command_addr);
301
302 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 30000, 0);
303 if ((status & (ATA_BUSY | ATA_ERR))) {
304 printf ("Error waiting for disk spin up: status 0x%02x\n",
305 status);
306 port[num].dev_mask &= ~0x01;
307 return 1;
308 }
309
310 /* Wait for disk to enter Active state */
311 do {
312 msleep (10);
313 status = check_power_mode (num);
314 } while ((status == 0x00) || (status == 0x80));
315
316 if (status == 0x01) {
317 printf ("Falied waiting for disk to spin up\n");
318 return 1;
319 }
320
321 return 0;
322}
323
324/* Return value is not the usual here
325 * 0x00 - Device stand by
326 * 0x01 - Operation failed
327 * 0x80 - Device idle
328 * 0xff - Device active
329*/
330static u8 check_power_mode (int num)
331{
332 u8 status = 0;
333 u8 res = 0;
334 if (!(port[num].dev_mask & 0x01)) {
335 debug ("Device ata%d is not present\n", num);
336 return 1;
337 }
338
339 if (!(sata_chk_status (&port[num].ioaddr, 0) & ATA_DRDY)) {
340 printf ("Device ata%d not ready\n", num);
341 return 1;
342 }
343
344 writeb (0, port[num].ioaddr.feature_addr);
345 writeb (0, port[num].ioaddr.nsect_addr);
346 writeb (0, port[num].ioaddr.lbal_addr);
347 writeb (0, port[num].ioaddr.lbam_addr);
348 writeb (0, port[num].ioaddr.lbah_addr);
349
350 writeb (ATA_DEVICE_OBS, port[num].ioaddr.device_addr);
351 writeb (ATA_CMD_CHK_POWER, port[num].ioaddr.command_addr);
352
353 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 5000, 0);
354 if ((status & (ATA_BUSY | ATA_ERR))) {
355 printf
356 ("Error waiting for check power mode complete : status 0x%02x\n",
357 status);
358 port[num].dev_mask &= ~0x01;
359 return 1;
360 }
361 res = readb (port[num].ioaddr.nsect_addr);
362 debug ("Check powermode: %d\n", res);
363 return res;
364
365}
366
367static void sata_port (struct sata_ioports *ioport)
368{
369 ioport->data_addr = ioport->cmd_addr + ATA_REG_DATA;
370 ioport->error_addr = ioport->cmd_addr + ATA_REG_ERR;
371 ioport->feature_addr = ioport->cmd_addr + ATA_REG_FEATURE;
372 ioport->nsect_addr = ioport->cmd_addr + ATA_REG_NSECT;
373 ioport->lbal_addr = ioport->cmd_addr + ATA_REG_LBAL;
374 ioport->lbam_addr = ioport->cmd_addr + ATA_REG_LBAM;
375 ioport->lbah_addr = ioport->cmd_addr + ATA_REG_LBAH;
376 ioport->device_addr = ioport->cmd_addr + ATA_REG_DEVICE;
377 ioport->status_addr = ioport->cmd_addr + ATA_REG_STATUS;
378 ioport->command_addr = ioport->cmd_addr + ATA_REG_CMD;
379}
380
381static u8 wait_for_irq (int num, unsigned int max)
382{
383
384 u32 port = iobase[5];
385 switch (num) {
386 case 0:
387 port += VND_TF_CNST_CH0;
388 break;
389 case 1:
390 port += VND_TF_CNST_CH1;
391 break;
392 case 2:
393 port += VND_TF_CNST_CH2;
394 break;
395 case 3:
396 port += VND_TF_CNST_CH3;
397 break;
398 default:
399 return 1;
400 }
401
402 do {
403 if (readl (port) & VND_TF_CNST_INTST) {
404 break;
405 }
406 udelay (1000);
407 max--;
408 } while ((max > 0));
409
410 return (max == 0);
411}
412
413static u8 sata_busy_wait (struct sata_ioports *ioaddr, int bits,
414 unsigned int max, u8 usealtstatus)
415{
416 u8 status;
417
418 do {
419 if (!((status = sata_chk_status (ioaddr, usealtstatus)) & bits)) {
420 break;
421 }
422 udelay (1000);
423 max--;
424 } while ((status & bits) && (max > 0));
425
426 return status;
427}
428
429static u8 sata_chk_status (struct sata_ioports *ioaddr, u8 usealtstatus)
430{
431 if (!usealtstatus) {
432 return readb (ioaddr->status_addr);
433 } else {
434 return readb (ioaddr->altstatus_addr);
435 }
436}
437
438static void msleep (int count)
439{
440 int i;
441
442 for (i = 0; i < count; i++)
443 udelay (1000);
444}
445
446/* Read up to 255 sectors
447 *
448 * Returns sectors read
449*/
450static u8 do_one_read (int device, ulong block, u8 blkcnt, u16 * buff,
451 uchar lba48)
452{
453
454 u8 sr = 0;
455 u8 status;
456 u64 blknr = (u64) block;
457
458 if (!(sata_chk_status (&port[device].ioaddr, 0) & ATA_DRDY)) {
459 printf ("Device ata%d not ready\n", device);
460 return 0;
461 }
462
463 /* Set up transfer */
464#ifdef CONFIG_LBA48
465 if (lba48) {
466 /* write high bits */
467 writeb (0, port[device].ioaddr.nsect_addr);
468 writeb ((blknr >> 24) & 0xFF, port[device].ioaddr.lbal_addr);
469 writeb ((blknr >> 32) & 0xFF, port[device].ioaddr.lbam_addr);
470 writeb ((blknr >> 40) & 0xFF, port[device].ioaddr.lbah_addr);
471 }
472#endif
473 writeb (blkcnt, port[device].ioaddr.nsect_addr);
474 writeb (((blknr) >> 0) & 0xFF, port[device].ioaddr.lbal_addr);
475 writeb ((blknr >> 8) & 0xFF, port[device].ioaddr.lbam_addr);
476 writeb ((blknr >> 16) & 0xFF, port[device].ioaddr.lbah_addr);
477
478#ifdef CONFIG_LBA48
479 if (lba48) {
480 writeb (ATA_LBA, port[device].ioaddr.device_addr);
481 writeb (ATA_CMD_PIO_READ_EXT, port[device].ioaddr.command_addr);
482 } else
483#endif
484 {
485 writeb (ATA_LBA | ((blknr >> 24) & 0xF),
486 port[device].ioaddr.device_addr);
487 writeb (ATA_CMD_PIO_READ, port[device].ioaddr.command_addr);
488 }
489
490 status = sata_busy_wait (&port[device].ioaddr, ATA_BUSY, 10000, 1);
491
492 if (status & ATA_BUSY) {
493 u8 err = 0;
494
495 printf ("Device %d not responding status %d\n", device, status);
496 err = readb (port[device].ioaddr.error_addr);
497 printf ("Error reg = 0x%x\n", err);
498
499 return (sr);
500 }
501 while (blkcnt--) {
502
503 if (wait_for_irq (device, 500)) {
504 printf ("ata%u irq failed\n", device);
505 return sr;
506 }
507
508 status = sata_chk_status (&port[device].ioaddr, 0);
509 if (status & ATA_ERR) {
510 printf ("ata%u error %d\n", device,
511 readb (port[device].ioaddr.error_addr));
512 return sr;
513 }
514 /* Read one sector */
515 input_data (&port[device].ioaddr, buff, ATA_SECTOR_WORDS);
516 buff += ATA_SECTOR_WORDS;
517 sr++;
518
519 }
520 return sr;
521}
522
523ulong sata_read (int device, ulong block, lbaint_t blkcnt, void *buff)
524{
525 ulong n = 0, sread;
526 u16 *buffer = (u16 *) buff;
527 u8 status = 0;
528 u64 blknr = (u64) block;
529 unsigned char lba48 = 0;
530
531#ifdef CONFIG_LBA48
532 if (blknr > 0xfffffff) {
533 if (!sata_dev_desc[device].lba48) {
534 printf ("Drive doesn't support 48-bit addressing\n");
535 return 0;
536 }
537 /* more than 28 bits used, use 48bit mode */
538 lba48 = 1;
539 }
540#endif
541
542 while (blkcnt > 0) {
543
544 if (blkcnt > 255) {
545 sread = 255;
546 } else {
547 sread = blkcnt;
548 }
549
550 status = do_one_read (device, blknr, sread, buffer, lba48);
551 if (status != sread) {
552 printf ("Read failed\n");
553 return n;
554 }
555
556 blkcnt -= sread;
557 blknr += sread;
558 n += sread;
559 buffer += sread * ATA_SECTOR_WORDS;
560 }
561 return n;
562}
563
564ulong sata_write (int device, ulong block, lbaint_t blkcnt, const void *buff)
565{
566 ulong n = 0;
567 u16 *buffer = (u16 *) buff;
568 unsigned char status = 0, num = 0;
569 u64 blknr = (u64) block;
570#ifdef CONFIG_LBA48
571 unsigned char lba48 = 0;
572
573 if (blknr > 0xfffffff) {
574 if (!sata_dev_desc[device].lba48) {
575 printf ("Drive doesn't support 48-bit addressing\n");
576 return 0;
577 }
578 /* more than 28 bits used, use 48bit mode */
579 lba48 = 1;
580 }
581#endif
582 /*Port Number */
583 num = device;
584
585 while (blkcnt-- > 0) {
586 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 500, 0);
587 if (status & ATA_BUSY) {
588 printf ("ata%u failed to respond\n", port[num].port_no);
589 return n;
590 }
591#ifdef CONFIG_LBA48
592 if (lba48) {
593 /* write high bits */
594 writeb (0, port[num].ioaddr.nsect_addr);
595 writeb ((blknr >> 24) & 0xFF,
596 port[num].ioaddr.lbal_addr);
597 writeb ((blknr >> 32) & 0xFF,
598 port[num].ioaddr.lbam_addr);
599 writeb ((blknr >> 40) & 0xFF,
600 port[num].ioaddr.lbah_addr);
601 }
602#endif
603 writeb (1, port[num].ioaddr.nsect_addr);
604 writeb ((blknr >> 0) & 0xFF, port[num].ioaddr.lbal_addr);
605 writeb ((blknr >> 8) & 0xFF, port[num].ioaddr.lbam_addr);
606 writeb ((blknr >> 16) & 0xFF, port[num].ioaddr.lbah_addr);
607#ifdef CONFIG_LBA48
608 if (lba48) {
609 writeb (ATA_LBA, port[num].ioaddr.device_addr);
610 writeb (ATA_CMD_PIO_WRITE_EXT, port[num].ioaddr.command_addr);
611 } else
612#endif
613 {
614 writeb (ATA_LBA | ((blknr >> 24) & 0xF),
615 port[num].ioaddr.device_addr);
616 writeb (ATA_CMD_PIO_WRITE, port[num].ioaddr.command_addr);
617 }
618
619 msleep (50);
620 /*may take up to 4 sec */
621 status = sata_busy_wait (&port[num].ioaddr, ATA_BUSY, 4000, 0);
622 if ((status & (ATA_DRQ | ATA_BUSY | ATA_ERR)) != ATA_DRQ) {
623 printf ("Error no DRQ dev %d blk %ld: sts 0x%02x\n",
624 device, (ulong) blknr, status);
625 return (n);
626 }
627
628 output_data (&port[num].ioaddr, buffer, ATA_SECTOR_WORDS);
629 readb (port[num].ioaddr.altstatus_addr);
630 udelay (50);
631
632 ++n;
633 ++blknr;
634 buffer += ATA_SECTOR_WORDS;
635 }
636 return n;
637}
638
639/* Driver implementation */
640static u8 sil_get_device_cache_line (pci_dev_t pdev)
641{
642 u8 cache_line = 0;
643 pci_read_config_byte (pdev, PCI_CACHE_LINE_SIZE, &cache_line);
644 return cache_line;
645}
646
647int init_sata (int dev)
648{
649 static u8 init_done = 0;
650 static int res = 1;
651 pci_dev_t devno;
652 u8 cls = 0;
653 u16 cmd = 0;
654 u32 sconf = 0;
655
656 if (init_done) {
657 return res;
658 }
659
660 init_done = 1;
661
662 if ((devno = pci_find_device (SIL_VEND_ID, SIL3114_DEVICE_ID, 0)) == -1) {
663 res = 1;
664 return res;
665 }
666
667 /* Read out all BARs, even though we only use MMIO from BAR5 */
668 pci_read_config_dword (devno, PCI_BASE_ADDRESS_0, &iobase[0]);
669 pci_read_config_dword (devno, PCI_BASE_ADDRESS_1, &iobase[1]);
670 pci_read_config_dword (devno, PCI_BASE_ADDRESS_2, &iobase[2]);
671 pci_read_config_dword (devno, PCI_BASE_ADDRESS_3, &iobase[3]);
672 pci_read_config_dword (devno, PCI_BASE_ADDRESS_4, &iobase[4]);
673 pci_read_config_dword (devno, PCI_BASE_ADDRESS_5, &iobase[5]);
674
675 if ((iobase[0] == 0xFFFFFFFF) || (iobase[1] == 0xFFFFFFFF) ||
676 (iobase[2] == 0xFFFFFFFF) || (iobase[3] == 0xFFFFFFFF) ||
677 (iobase[4] == 0xFFFFFFFF) || (iobase[5] == 0xFFFFFFFF)) {
678 printf ("Error no base addr for SATA controller\n");
679 res = 1;
680 return res;
681 }
682
683 /* mask off unused bits */
684 iobase[0] &= 0xfffffffc;
685 iobase[1] &= 0xfffffff8;
686 iobase[2] &= 0xfffffffc;
687 iobase[3] &= 0xfffffff8;
688 iobase[4] &= 0xfffffff0;
689 iobase[5] &= 0xfffffc00;
690
691 /* from sata_sil in Linux kernel */
692 cls = sil_get_device_cache_line (devno);
693 if (cls) {
694 cls >>= 3;
695 cls++; /* cls = (line_size/8)+1 */
696 writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH0);
697 writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH1);
698 writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH2);
699 writel (cls << 8 | cls, iobase[5] + VND_FIFOCFG_CH3);
700 } else {
701 printf ("Cache line not set. Driver may not function\n");
702 }
703
704 /* Enable operation */
705 pci_read_config_word (devno, PCI_COMMAND, &cmd);
706 cmd |= PCI_COMMAND_MASTER | PCI_COMMAND_IO | PCI_COMMAND_MEMORY;
707 pci_write_config_word (devno, PCI_COMMAND, cmd);
708
709 /* Disable interrupt usage */
710 pci_read_config_dword (devno, VND_SYSCONFSTAT, &sconf);
711 sconf |= (VND_SYSCONFSTAT_CHN_0_INTBLOCK | VND_SYSCONFSTAT_CHN_1_INTBLOCK);
712 pci_write_config_dword (devno, VND_SYSCONFSTAT, sconf);
713
714 res = 0;
715 return res;
716}
717
718/* Check if device is connected to port */
719int sata_bus_probe (int portno)
720{
721 u32 port = iobase[5];
722 u32 val;
723 switch (portno) {
724 case 0:
725 port += VND_SSTATUS_CH0;
726 break;
727 case 1:
728 port += VND_SSTATUS_CH1;
729 break;
730 case 2:
731 port += VND_SSTATUS_CH2;
732 break;
733 case 3:
734 port += VND_SSTATUS_CH3;
735 break;
736 default:
737 return 0;
738 }
739 val = readl (port);
740 if ((val & SATA_DET_PRES) == SATA_DET_PRES) {
741 return 1;
742 } else {
743 return 0;
744 }
745}
746
747int sata_phy_reset (int portno)
748{
749 u32 port = iobase[5];
750 u32 val;
751 switch (portno) {
752 case 0:
753 port += VND_SCONTROL_CH0;
754 break;
755 case 1:
756 port += VND_SCONTROL_CH1;
757 break;
758 case 2:
759 port += VND_SCONTROL_CH2;
760 break;
761 case 3:
762 port += VND_SCONTROL_CH3;
763 break;
764 default:
765 return 0;
766 }
767 val = readl (port);
768 writel (val | SATA_SC_DET_RST, port);
769 msleep (150);
770 writel (val & ~SATA_SC_DET_RST, port);
771 return 0;
772}
773
774int scan_sata (int dev)
775{
776 /* A bit brain dead, but the code has a legacy */
777 switch (dev) {
778 case 0:
779 port[0].port_no = 0;
780 port[0].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH0;
781 port[0].ioaddr.altstatus_addr = port[0].ioaddr.ctl_addr =
782 (iobase[5] + VND_TF2_CH0) | ATA_PCI_CTL_OFS;
783 port[0].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH0;
784 break;
Kumar Gala7625dd62011-11-09 06:21:10 +0000785#if (CONFIG_SYS_SATA_MAX_DEVICE >= 1)
Tor Krillf1352652008-05-29 10:40:17 +0200786 case 1:
787 port[1].port_no = 0;
788 port[1].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH1;
789 port[1].ioaddr.altstatus_addr = port[1].ioaddr.ctl_addr =
790 (iobase[5] + VND_TF2_CH1) | ATA_PCI_CTL_OFS;
791 port[1].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH1;
792 break;
Kumar Gala7625dd62011-11-09 06:21:10 +0000793#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 2)
Tor Krillf1352652008-05-29 10:40:17 +0200794 case 2:
795 port[2].port_no = 0;
796 port[2].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH2;
797 port[2].ioaddr.altstatus_addr = port[2].ioaddr.ctl_addr =
798 (iobase[5] + VND_TF2_CH2) | ATA_PCI_CTL_OFS;
799 port[2].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH2;
800 break;
Kumar Gala7625dd62011-11-09 06:21:10 +0000801#elif (CONFIG_SYS_SATA_MAX_DEVICE >= 3)
Tor Krillf1352652008-05-29 10:40:17 +0200802 case 3:
803 port[3].port_no = 0;
804 port[3].ioaddr.cmd_addr = iobase[5] + VND_TF0_CH3;
805 port[3].ioaddr.altstatus_addr = port[3].ioaddr.ctl_addr =
806 (iobase[5] + VND_TF2_CH3) | ATA_PCI_CTL_OFS;
807 port[3].ioaddr.bmdma_addr = iobase[5] + VND_BMDMA_CH3;
808 break;
Kumar Gala7625dd62011-11-09 06:21:10 +0000809#endif
Tor Krillf1352652008-05-29 10:40:17 +0200810 default:
811 printf ("Tried to scan unknown port: ata%d\n", dev);
812 return 1;
813 }
814
815 /* Initialize other registers */
816 sata_port (&port[dev].ioaddr);
817
818 /* Check for attached device */
819 if (!sata_bus_probe (dev)) {
820 port[dev].port_state = 0;
821 debug ("SATA#%d port is not present\n", dev);
822 } else {
823 debug ("SATA#%d port is present\n", dev);
824 if (sata_bus_softreset (dev)) {
825 /* soft reset failed, try a hard one */
826 sata_phy_reset (dev);
827 if (sata_bus_softreset (dev)) {
828 port[dev].port_state = 0;
829 } else {
830 port[dev].port_state = 1;
831 }
832 } else {
833 port[dev].port_state = 1;
834 }
835 }
836 if (port[dev].port_state == 1) {
837 /* Probe device and set xfer mode */
838 sata_identify (dev, 0);
839 set_Feature_cmd (dev, 0);
840 }
841
842 return 0;
843}