blob: 9980969d09862b10cb0261ab8660042b654487c7 [file] [log] [blame]
Hans de Goede53ab4af2015-04-15 19:03:49 +02001/*
2 * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48/dts-v1/;
49#include "sun5i-a10s.dtsi"
50#include "sunxi-common-regulators.dtsi"
51
52#include <dt-bindings/gpio/gpio.h>
53#include <dt-bindings/pinctrl/sun4i-a10.h>
54
55/ {
56 model = "R7 A10s hdmi tv-stick";
57 compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s";
58
59 aliases {
60 serial0 = &uart0;
61 };
62
63 chosen {
64 stdout-path = "serial0:115200n8";
65 };
66
67 leds {
68 compatible = "gpio-leds";
69 pinctrl-names = "default";
70 pinctrl-0 = <&led_pins_r7>;
71
72 green {
73 label = "r7-tv-dongle:green:usr";
74 gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>;
75 default-state = "on";
76 };
77 };
78};
79
80&ehci0 {
81 status = "okay";
82};
83
84&mmc0 {
85 pinctrl-names = "default";
86 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>;
87 vmmc-supply = <&reg_vcc3v3>;
88 bus-width = <4>;
89 cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
90 cd-inverted;
91 status = "okay";
92};
93
94&mmc1 {
95 pinctrl-names = "default";
96 pinctrl-0 = <&mmc1_pins_a>;
97 vmmc-supply = <&reg_vcc3v3>;
98 bus-width = <4>;
99 non-removable;
100 status = "okay";
101};
102
103&ohci0 {
104 status = "okay";
105};
106
107&pio {
108 mmc0_cd_pin_r7: mmc0_cd_pin@0 {
109 allwinner,pins = "PG1";
110 allwinner,function = "gpio_in";
111 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
112 allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
113 };
114
115 led_pins_r7: led_pins@0 {
116 allwinner,pins = "PB2";
117 allwinner,function = "gpio_out";
118 allwinner,drive = <SUN4I_PINCTRL_20_MA>;
119 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
120 };
121
122 usb1_vbus_pin_r7: usb1_vbus_pin@0 {
123 allwinner,pins = "PG13";
124 allwinner,function = "gpio_out";
125 allwinner,drive = <SUN4I_PINCTRL_10_MA>;
126 allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
127 };
128};
129
130&reg_usb1_vbus {
131 pinctrl-0 = <&usb1_vbus_pin_r7>;
132 gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>;
133 status = "okay";
134};
135
136&uart0 {
137 pinctrl-names = "default";
138 pinctrl-0 = <&uart0_pins_a>;
139 status = "okay";
140};
141
142&usbphy {
143 usb1_vbus-supply = <&reg_usb1_vbus>;
144 status = "okay";
145};