blob: f2fb59203f714c3379fcc881fc65b32a089722eb [file] [log] [blame]
Reinhard Arltc2e49f72009-07-25 06:19:12 +02001/*
2 * esd vme8349 U-Boot configuration file
3 * Copyright (c) 2008, 2009 esd gmbh Hannover Germany
4 *
5 * (C) Copyright 2006
6 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
7 *
8 * reinhard.arlt@esd-electronics.de
9 * Based on the MPC8349EMDS config.
10 *
11 * See file CREDITS for list of people who contributed to this
12 * project.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * MA 02111-1307 USA
28 */
29
30/*
31 * vme8349 board configuration file.
32 */
33
34#ifndef __CONFIG_H
35#define __CONFIG_H
36
37/*
Reinhard Arlt1dee9be2009-12-08 09:13:08 +010038 * Top level Makefile configuration choices
39 */
40#ifdef CONFIG_MK_caddy2
41#define VME_CADDY2
42#endif
43
44/*
Reinhard Arltc2e49f72009-07-25 06:19:12 +020045 * High Level Configuration Options
46 */
47#define CONFIG_E300 1 /* E300 Family */
48#define CONFIG_MPC83xx 1 /* MPC83xx family */
49#define CONFIG_MPC834x 1 /* MPC834x family */
50#define CONFIG_MPC8349 1 /* MPC8349 specific */
51#define CONFIG_VME8349 1 /* ESD VME8349 board specific */
52
Reinhard Arlt1dee9be2009-12-08 09:13:08 +010053#define CONFIG_MISC_INIT_R
54
Reinhard Arltc2e49f72009-07-25 06:19:12 +020055#define CONFIG_PCI
56/* Don't enable PCI2 on vme834x - it doesn't exist physically. */
57#undef CONFIG_MPC83XX_PCI2 /* support for 2nd PCI controller */
58
59#define PCI_66M
60#ifdef PCI_66M
61#define CONFIG_83XX_CLKIN 66000000 /* in Hz */
62#else
63#define CONFIG_83XX_CLKIN 33000000 /* in Hz */
64#endif
65
66#ifndef CONFIG_SYS_CLK_FREQ
67#ifdef PCI_66M
68#define CONFIG_SYS_CLK_FREQ 66000000
69#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_4X1
70#else
71#define CONFIG_SYS_CLK_FREQ 33000000
72#define HRCWL_CSB_TO_CLKIN HRCWL_CSB_TO_CLKIN_8X1
73#endif
74#endif
75
76#define CONFIG_SYS_IMMR 0xE0000000
77
78#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
79#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest region */
80#define CONFIG_SYS_MEMTEST_END 0x00100000
81
82/*
83 * DDR Setup
84 */
85#define CONFIG_DDR_ECC /* only for ECC DDR module */
86#define CONFIG_DDR_ECC_CMD /* use DDR ECC user commands */
Reinhard Arlt1dee9be2009-12-08 09:13:08 +010087#define CONFIG_SPD_EEPROM
88#define SPD_EEPROM_ADDRESS 0x54
89#define CONFIG_SYS_READ_SPD vme8349_read_spd
Reinhard Arltc2e49f72009-07-25 06:19:12 +020090#define CONFIG_SYS_83XX_DDR_USES_CS0 /* esd; Fsl board uses CS2/CS3 */
91
92/*
93 * 32-bit data path mode.
94 *
95 * Please note that using this mode for devices with the real density of 64-bit
96 * effectively reduces the amount of available memory due to the effect of
97 * wrapping around while translating address to row/columns, for example in the
98 * 256MB module the upper 128MB get aliased with contents of the lower
99 * 128MB); normally this define should be used for devices with real 32-bit
100 * data path.
101 */
102#undef CONFIG_DDR_32BIT
103
104#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/
105#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE
106#define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE
107#define CONFIG_SYS_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \
108 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075)
109#define CONFIG_DDR_2T_TIMING
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100110#define CONFIG_SYS_DDRCDR 0x80080001
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200111
112/*
113 * FLASH on the Local Bus
114 */
115#define CONFIG_SYS_FLASH_CFI
116#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100117#ifdef VME_CADDY2
118#define CONFIG_SYS_FLASH_BASE 0xffc00000 /* start of FLASH */
119#define CONFIG_SYS_FLASH_SIZE 4 /* flash size in MB */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200120#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
Kim Phillips4e7e12d2010-02-22 19:39:16 -0600121 (2 << BR_PS_SHIFT) | /* 16bit */ \
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200122 BR_V) /* valid */
123
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100124#define CONFIG_SYS_OR0_PRELIM 0xffc06ff7 /* 4 MB flash size */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200125#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100126#define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000015 /* 4 MB window size */
127#else
128#define CONFIG_SYS_FLASH_BASE 0xf8000000 /* start of FLASH */
129#define CONFIG_SYS_FLASH_SIZE 128 /* flash size in MB */
130#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE | \
Kim Phillips4e7e12d2010-02-22 19:39:16 -0600131 (2 << BR_PS_SHIFT) | /* 16bit */ \
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100132 BR_V) /* valid */
133
134#define CONFIG_SYS_OR0_PRELIM 0xf8006ff7 /* 128 MB flash size */
135#define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE
136#define CONFIG_SYS_LBLAWAR0_PRELIM 0x8000001a /* 128 MB window size */
137#endif
138/* #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200139
140#define CONFIG_SYS_BR1_PRELIM (0xf0000000 | 0x00001801)
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100141#define CONFIG_SYS_OR1_PRELIM (0xfffc0008 | 0x00000200)
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200142#define CONFIG_SYS_LBLAWBAR1_PRELIM 0xf0000000
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100143#define CONFIG_SYS_LBLAWAR1_PRELIM (0x80000000 | 0x00000011)
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200144
145#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */
146#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device*/
147
148#undef CONFIG_SYS_FLASH_CHECKSUM
149#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */
150#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */
151
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200152#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
153
154#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
155#define CONFIG_SYS_RAMBOOT
156#else
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100157#undef CONFIG_SYS_RAMBOOT
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200158#endif
159
160#define CONFIG_SYS_INIT_RAM_LOCK 1
161#define CONFIG_SYS_INIT_RAM_ADDR 0xF7000000 /* Initial RAM addr */
162#define CONFIG_SYS_INIT_RAM_END 0x1000 /* size */
163
164#define CONFIG_SYS_GBL_DATA_SIZE 0x100 /* size init data */
165#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - \
166 CONFIG_SYS_GBL_DATA_SIZE)
167#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
168
169#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB */
170#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Malloc size */
171
172/*
173 * Local Bus LCRR and LBCR regs
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100174 * LCRR: no DLL bypass, Clock divider is 4
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200175 * External Local Bus rate is
176 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
177 */
Kim Phillipsc7190f02009-09-25 18:19:44 -0500178#define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_4
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200179#define CONFIG_SYS_LBC_LBCR 0x00000000
180
181#undef CONFIG_SYS_LB_SDRAM /* if board has SDRAM on local bus */
182
183/*
184 * Serial Port
185 */
186#define CONFIG_CONS_INDEX 1
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200187#define CONFIG_SYS_NS16550
188#define CONFIG_SYS_NS16550_SERIAL
189#define CONFIG_SYS_NS16550_REG_SIZE 1
190#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
191
192#define CONFIG_SYS_BAUDRATE_TABLE \
193 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
194
195#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
196#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
197
198#define CONFIG_CMDLINE_EDITING /* add command line history */
Kim Phillipsa059e902010-04-15 17:36:05 -0500199#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200200/* Use the HUSH parser */
201#define CONFIG_SYS_HUSH_PARSER
202#ifdef CONFIG_SYS_HUSH_PARSER
203#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
204#endif
205
206/* pass open firmware flat tree */
207#define CONFIG_OF_LIBFDT
208#define CONFIG_OF_BOARD_SETUP
209#define CONFIG_OF_STDOUT_VIA_ALIAS
210
211/* I2C */
212#define CONFIG_I2C_MULTI_BUS
213#define CONFIG_HARD_I2C /* I2C with hardware support*/
214#undef CONFIG_SOFT_I2C /* I2C bit-banged */
215#define CONFIG_FSL_I2C
216#define CONFIG_I2C_CMD_TREE
217#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
218#define CONFIG_SYS_I2C_SLAVE 0x7F
219#define CONFIG_SYS_I2C_NOPROBES {{0, 0x69}} /* Don't probe these addrs */
220#define CONFIG_SYS_I2C1_OFFSET 0x3000
221#define CONFIG_SYS_I2C2_OFFSET 0x3100
222#define CONFIG_SYS_I2C_OFFSET CONFIG_SYS_I2C1_OFFSET
Paul Gortmakerefaf6f12009-10-02 18:54:20 -0400223/* could also use CONFIG_I2C_MULTI_BUS and CONFIG_SYS_SPD_BUS_NUM... */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200224
225#define CONFIG_SYS_I2C_8574_ADDR2 0x20 /* I2C1, PCF8574 */
226
227/* TSEC */
228#define CONFIG_SYS_TSEC1_OFFSET 0x24000
229#define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
230#define CONFIG_SYS_TSEC2_OFFSET 0x25000
231#define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC2_OFFSET)
232
233/*
234 * General PCI
235 * Addresses are mapped 1-1.
236 */
237#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
238#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
239#define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */
240#define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000
241#define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE
242#define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */
243#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
244#define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000
245#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
246
247#define CONFIG_SYS_PCI2_MEM_BASE 0xA0000000
248#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
249#define CONFIG_SYS_PCI2_MEM_SIZE 0x10000000 /* 256M */
250#define CONFIG_SYS_PCI2_MMIO_BASE 0xB0000000
251#define CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_BASE
252#define CONFIG_SYS_PCI2_MMIO_SIZE 0x10000000 /* 256M */
253#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
254#define CONFIG_SYS_PCI2_IO_PHYS 0xE2100000
255#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
256
257#if defined(CONFIG_PCI)
258
259#define PCI_64BIT
260#define PCI_ONE_PCI1
261#if defined(PCI_64BIT)
262#undef PCI_ALL_PCI1
263#undef PCI_TWO_PCI1
264#undef PCI_ONE_PCI1
265#endif
266
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100267#ifndef VME_CADDY2
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200268#define CONFIG_NET_MULTI
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100269#endif
270#define CONFIG_PCI_PNP /* do pci plug-and-play */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200271
272#undef CONFIG_EEPRO100
273#undef CONFIG_TULIP
274
275#if !defined(CONFIG_PCI_PNP)
276 #define PCI_ENET0_IOADDR 0xFIXME
277 #define PCI_ENET0_MEMADDR 0xFIXME
278 #define PCI_IDSEL_NUMBER 0xFIXME
279#endif
280
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100281#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
282#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */
283
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200284#endif /* CONFIG_PCI */
285
286/*
287 * TSEC configuration
288 */
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100289#ifdef VME_CADDY2
290#define CONFIG_E1000
291#else
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200292#define CONFIG_TSEC_ENET /* TSEC ethernet support */
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100293#endif
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200294
295#if defined(CONFIG_TSEC_ENET)
296#ifndef CONFIG_NET_MULTI
297#define CONFIG_NET_MULTI
298#endif
299
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100300#define CONFIG_GMII /* MII PHY management */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200301#define CONFIG_TSEC1
302#define CONFIG_TSEC1_NAME "TSEC0"
303#define CONFIG_TSEC2
304#define CONFIG_TSEC2_NAME "TSEC1"
305#define CONFIG_PHY_M88E1111
306#define TSEC1_PHY_ADDR 0x08
307#define TSEC2_PHY_ADDR 0x10
308#define TSEC1_PHYIDX 0
309#define TSEC2_PHYIDX 0
310#define TSEC1_FLAGS TSEC_GIGABIT
311#define TSEC2_FLAGS TSEC_GIGABIT
312
313/* Options are: TSEC[0-1] */
314#define CONFIG_ETHPRIME "TSEC0"
315
316#endif /* CONFIG_TSEC_ENET */
317
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100318#if defined(CONFIG_E1000)
319#ifndef CONFIG_NET_MULTI
320#define CONFIG_NET_MULTI
321#endif
322#endif
323
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200324/*
325 * Environment
326 */
327#ifndef CONFIG_SYS_RAMBOOT
328 #define CONFIG_ENV_IS_IN_FLASH
329 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0xc0000)
330 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
331 #define CONFIG_ENV_SIZE 0x2000
332
333/* Address and size of Redundant Environment Sector */
334#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
335#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
336
337#else
338 #define CONFIG_SYS_NO_FLASH /* Flash is not usable now */
339 #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */
340 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000)
341 #define CONFIG_ENV_SIZE 0x2000
342#endif
343
344#define CONFIG_LOADS_ECHO /* echo on for serial download */
345#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */
346
347/*
348 * BOOTP options
349 */
350#define CONFIG_BOOTP_BOOTFILESIZE
351#define CONFIG_BOOTP_BOOTPATH
352#define CONFIG_BOOTP_GATEWAY
353#define CONFIG_BOOTP_HOSTNAME
354
355/*
356 * Command line configuration.
357 */
358#include <config_cmd_default.h>
359
360#define CONFIG_CMD_I2C
361#define CONFIG_CMD_MII
362#define CONFIG_CMD_PING
363#define CONFIG_CMD_DATE
364#define CONFIG_SYS_RTC_BUS_NUM 0x01
365#define CONFIG_SYS_I2C_RTC_ADDR 0x32
366#define CONFIG_RTC_RX8025
367#define CONFIG_CMD_TSI148
368
369#if defined(CONFIG_PCI)
370 #define CONFIG_CMD_PCI
371#endif
372
373#if defined(CONFIG_SYS_RAMBOOT)
374 #undef CONFIG_CMD_ENV
375 #undef CONFIG_CMD_LOADS
376#endif
377
378#define CONFIG_CMD_ELF
379/* Pass Ethernet MAC to VxWorks */
380#define CONFIG_SYS_VXWORKS_MAC_PTR 0x000043f0
381
382#undef CONFIG_WATCHDOG /* watchdog disabled */
383
384/*
385 * Miscellaneous configurable options
386 */
387#define CONFIG_SYS_LONGHELP /* undef to save memory */
388#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
389#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
390
391#if defined(CONFIG_CMD_KGDB)
392 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
393#else
394 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
395#endif
396
397#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
398#define CONFIG_SYS_MAXARGS 16 /* max num of command args */
399#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buf Size */
400#define CONFIG_SYS_HZ 1000 /* decr freq: 1ms ticks */
401
402/*
403 * For booting Linux, the board info and command line data
Ira W. Snyder9f530d52010-09-10 15:42:32 -0700404 * have to be in the first 256 MB of memory, since this is
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200405 * the maximum mapped by the Linux kernel during initialization.
406 */
Ira W. Snyder9f530d52010-09-10 15:42:32 -0700407#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Init Memory map for Linux*/
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200408
409#define CONFIG_SYS_RCWH_PCIHOST 0x80000000 /* PCIHOST */
410
411#define CONFIG_SYS_HRCW_LOW (\
412 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
413 HRCWL_DDR_TO_SCB_CLK_1X1 |\
414 HRCWL_CSB_TO_CLKIN |\
415 HRCWL_VCO_1X2 |\
416 HRCWL_CORE_TO_CSB_2X1)
417
418#if defined(PCI_64BIT)
419#define CONFIG_SYS_HRCW_HIGH (\
420 HRCWH_PCI_HOST |\
421 HRCWH_64_BIT_PCI |\
422 HRCWH_PCI1_ARBITER_ENABLE |\
423 HRCWH_PCI2_ARBITER_DISABLE |\
424 HRCWH_CORE_ENABLE |\
425 HRCWH_FROM_0X00000100 |\
426 HRCWH_BOOTSEQ_DISABLE |\
427 HRCWH_SW_WATCHDOG_DISABLE |\
428 HRCWH_ROM_LOC_LOCAL_16BIT |\
429 HRCWH_TSEC1M_IN_GMII |\
430 HRCWH_TSEC2M_IN_GMII)
431#else
432#define CONFIG_SYS_HRCW_HIGH (\
433 HRCWH_PCI_HOST |\
434 HRCWH_32_BIT_PCI |\
435 HRCWH_PCI1_ARBITER_ENABLE |\
436 HRCWH_PCI2_ARBITER_ENABLE |\
437 HRCWH_CORE_ENABLE |\
438 HRCWH_FROM_0X00000100 |\
439 HRCWH_BOOTSEQ_DISABLE |\
440 HRCWH_SW_WATCHDOG_DISABLE |\
441 HRCWH_ROM_LOC_LOCAL_16BIT |\
442 HRCWH_TSEC1M_IN_GMII |\
443 HRCWH_TSEC2M_IN_GMII)
444#endif
445
446/* System IO Config */
447#define CONFIG_SYS_SICRH 0
448#define CONFIG_SYS_SICRL SICRL_LDP_A
449
450#define CONFIG_SYS_HID0_INIT 0x000000000
Kim Phillips1a2e2032010-04-20 19:37:54 -0500451#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \
452 HID0_ENABLE_INSTRUCTION_CACHE)
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200453
454#define CONFIG_SYS_HID2 HID2_HBE
455
456#define CONFIG_SYS_GPIO1_PRELIM
457#define CONFIG_SYS_GPIO1_DIR 0x00100000
458#define CONFIG_SYS_GPIO1_DAT 0x00100000
459
460#define CONFIG_SYS_GPIO2_PRELIM
461#define CONFIG_SYS_GPIO2_DIR 0x78900000
462#define CONFIG_SYS_GPIO2_DAT 0x70100000
463
464#define CONFIG_HIGH_BATS /* High BATs supported */
465
466/* DDR @ 0x00000000 */
467#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | \
468 BATL_MEMCOHERENCE)
469#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | \
470 BATU_VS | BATU_VP)
471
472/* PCI @ 0x80000000 */
473#ifdef CONFIG_PCI
474#define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_10 | \
475 BATL_MEMCOHERENCE)
476#define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE | BATU_BL_256M | \
477 BATU_VS | BATU_VP)
478#define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE | BATL_PP_10 | \
479 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
480#define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE | BATU_BL_256M | \
481 BATU_VS | BATU_VP)
482#else
483#define CONFIG_SYS_IBAT1L (0)
484#define CONFIG_SYS_IBAT1U (0)
485#define CONFIG_SYS_IBAT2L (0)
486#define CONFIG_SYS_IBAT2U (0)
487#endif
488
489#ifdef CONFIG_MPC83XX_PCI2
490#define CONFIG_SYS_IBAT3L (CONFIG_SYS_PCI2_MEM_BASE | BATL_PP_10 | \
491 BATL_MEMCOHERENCE)
492#define CONFIG_SYS_IBAT3U (CONFIG_SYS_PCI2_MEM_BASE | BATU_BL_256M | \
493 BATU_VS | BATU_VP)
494#define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI2_MMIO_BASE | BATL_PP_10 | \
495 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
496#define CONFIG_SYS_IBAT4U (CONFIG_SYS_PCI2_MMIO_BASE | BATU_BL_256M | \
497 BATU_VS | BATU_VP)
498#else
499#define CONFIG_SYS_IBAT3L (0)
500#define CONFIG_SYS_IBAT3U (0)
501#define CONFIG_SYS_IBAT4L (0)
502#define CONFIG_SYS_IBAT4U (0)
503#endif
504
505/* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 */
506#define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR | BATL_PP_10 | \
507 BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
508#define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR | BATU_BL_256M | \
509 BATU_VS | BATU_VP)
510
511#define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
512#define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
513
514#if (CONFIG_SYS_DDR_SIZE == 512)
515#define CONFIG_SYS_IBAT7L (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
516 BATL_PP_10 | BATL_MEMCOHERENCE)
517#define CONFIG_SYS_IBAT7U (CONFIG_SYS_SDRAM_BASE+0x10000000 | \
518 BATU_BL_256M | BATU_VS | BATU_VP)
519#else
520#define CONFIG_SYS_IBAT7L (0)
521#define CONFIG_SYS_IBAT7U (0)
522#endif
523
524#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
525#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
526#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
527#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
528#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
529#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
530#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
531#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
532#define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L
533#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
534#define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L
535#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
536#define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L
537#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
538#define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L
539#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
540
541/*
542 * Internal Definitions
543 *
544 * Boot Flags
545 */
546#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
547#define BOOTFLAG_WARM 0x02 /* Software reboot */
548
549#if defined(CONFIG_CMD_KGDB)
550#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */
551#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
552#endif
553
554/*
555 * Environment Configuration
556 */
557#define CONFIG_ENV_OVERWRITE
558
559#if defined(CONFIG_TSEC_ENET)
560#define CONFIG_HAS_ETH0
561#define CONFIG_HAS_ETH1
562#endif
563
564#define CONFIG_HOSTNAME VME8349
565#define CONFIG_ROOTPATH /tftpboot/rootfs
566#define CONFIG_BOOTFILE uImage
567
Kim Phillips79f516b2009-08-21 16:34:38 -0500568#define CONFIG_LOADADDR 800000 /* def location for tftp and bootm */
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200569
570#define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */
571#undef CONFIG_BOOTARGS /* boot command will set bootargs */
572
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100573#define CONFIG_BAUDRATE 9600
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200574
575#define CONFIG_EXTRA_ENV_SETTINGS \
576 "netdev=eth0\0" \
577 "hostname=vme8349\0" \
578 "nfsargs=setenv bootargs root=/dev/nfs rw " \
579 "nfsroot=${serverip}:${rootpath}\0" \
580 "ramargs=setenv bootargs root=/dev/ram rw\0" \
581 "addip=setenv bootargs ${bootargs} " \
582 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
583 ":${hostname}:${netdev}:off panic=1\0" \
584 "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
585 "flash_nfs=run nfsargs addip addtty;" \
586 "bootm ${kernel_addr}\0" \
587 "flash_self=run ramargs addip addtty;" \
588 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
589 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
590 "bootm\0" \
591 "load=tftp 100000 /tftpboot/bdi2000/vme8349.bin\0" \
592 "update=protect off fff00000 fff3ffff; " \
593 "era fff00000 fff3ffff; cp.b 100000 fff00000 ${filesize}\0" \
594 "upd=run load update\0" \
Kim Phillips79f516b2009-08-21 16:34:38 -0500595 "fdtaddr=780000\0" \
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200596 "fdtfile=vme8349.dtb\0" \
597 ""
598
599#define CONFIG_NFSBOOTCOMMAND \
600 "setenv bootargs root=/dev/nfs rw " \
601 "nfsroot=$serverip:$rootpath " \
602 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
603 "console=$consoledev,$baudrate $othbootargs;" \
604 "tftp $loadaddr $bootfile;" \
605 "tftp $fdtaddr $fdtfile;" \
606 "bootm $loadaddr - $fdtaddr"
607
608#define CONFIG_RAMBOOTCOMMAND \
609 "setenv bootargs root=/dev/ram rw " \
610 "console=$consoledev,$baudrate $othbootargs;" \
611 "tftp $ramdiskaddr $ramdiskfile;" \
612 "tftp $loadaddr $bootfile;" \
613 "tftp $fdtaddr $fdtfile;" \
614 "bootm $loadaddr $ramdiskaddr $fdtaddr"
615
616#define CONFIG_BOOTCOMMAND "run flash_self"
617
Reinhard Arlt1dee9be2009-12-08 09:13:08 +0100618#ifndef __ASSEMBLY__
619int vme8349_read_spd(unsigned char chip, unsigned int addr, int alen,
620 unsigned char *buffer, int len);
621#endif
622
Reinhard Arltc2e49f72009-07-25 06:19:12 +0200623#endif /* __CONFIG_H */