blob: 0c319b1c54dfb2de426a716cd5c5b9394b3ef348 [file] [log] [blame]
Anatolij Gustschin4387cf12012-08-31 01:29:57 +00001/*
2 * (C) Copyright 2012
3 * DENX Software Engineering, Anatolij Gustschin <agust@denx.de>
4 *
5 * This program is free software; you can redistribute it and/or
6 * modify it under the terms of the GNU General Public License as
7 * published by the Free Software Foundation; either version 2 of
8 * the License, or (at your option) any later version.
9 */
10
11/*
12 * Valid values for CONFIG_SYS_TEXT_BASE are:
13 * 0xFF000000 boot low boot high (standard configuration)
14 * 0x00100000 boot from RAM (for testing only)
15 */
16#ifndef CONFIG_SYS_TEXT_BASE
17#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */
18#endif
19
20/* Board specific flash config */
21#define CONFIG_SYS_FLASH_BASE 0xff000000
22#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */
23/* max number of sectors on one chip */
24#define CONFIG_SYS_MAX_FLASH_SECT 128
25
26/*
27 * Include common defines for all ifm boards
28 */
29#include "o2dnt-common.h"
30
31/* GPIO configuration */
32#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */
33
34/* Other board specific configs */
35#define CONFIG_NETCONSOLE
36
37#define CONFIG_SYS_BOOTCS_CFG 0x00087801
38#define CONFIG_SYS_RESET_ADDRESS 0xff000000
39
40#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
41#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */
42
43#define CONFIG_BOARD_NAME "o2mnt"
44#define CONFIG_BOARD_BOOTCMD "${newcmd}"
45#define CONFIG_BOARD_MEM_LIMIT xstr(62)
46#define BOARD_POST_CRC32_END xstr(0x01000000)
47
48#ifndef CONFIG_IFM_SENSOR_TYPE
49#define CONFIG_IFM_SENSOR_TYPE "O2M110"
50#endif
51
52#define CONFIG_EXTRA_ENV_SETTINGS \
53 CONFIG_IFM_DEFAULT_ENV_SETTINGS \
54 CONFIG_IFM_DEFAULT_ENV_OLD \
55 CONFIG_IFM_DEFAULT_ENV_NEW \
56 "linbot=ff060000\0" \
57 "lintop=ff25ffff\0" \
58 "rambot=ff260000\0" \
59 "ramtop=ffc5ffff\0" \
60 "jffbot=ffc60000\0" \
61 "jfftop=ffffffff\0" \
62 "ubobot=" xstr(CONFIG_SYS_FLASH_BASE) "\0" \
63 "ubotop=ff03ffff\0" \
64 "kernel_addr=0xff060000\0" \
65 "ramdisk_addr=0xff260000\0" \
66 "newcmd=run scrprot;run flash_ext2\0" \
67 "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \
68 "${ramtop}\0" \
69 "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \
70 "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \
71 "rootfstype=ext2\0" \
72 "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \
73 "mw f0000678 0x30001;mw f0000670 0x3\0" \
74 "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \
75 "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \
76 "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \
77 "srelease=0.00\0"