Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 626b2df302fce4bf91a240f186ba447046db4741 / . / drivers / phy / Kconfig
blob: 9c775107e9c2c440a17caa49d329a77030fa2f71 [file] [log] [blame]
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200[diff] [blame]1
2menu "PHY Subsystem"
3
4config PHY
5 bool "PHY Core"
6 depends on DM
7 help
8 PHY support.
9
10 This framework is designed to provide a generic interface for PHY
11 devices. PHY devices are dedicated hardware that handle the physical
12 layer of the protocols in the OSI model.
13 PHYs are commonly used for high speed interfaces such as Serial-ATA
14 or PCI express.
15 The API provides functions to initialize/deinitialize the
16 PHY, power on/off the PHY, and reset the PHY. It's meant to be as
17 compatible as possible with the equivalent framework found in the
18 linux kernel.
19
20config SPL_PHY
21 bool "PHY Core in SPL"
Adam Forda0746672019-08-24 13:50:34 -0500[diff] [blame]22 depends on DM && SPL
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200[diff] [blame]23 help
24 PHY support in SPL.
25
26 This framework is designed to provide a generic interface for PHY
27 devices. PHY devices are dedicated hardware that handle the physical
28 layer of the protocols (https://en.wikipedia.org/wiki/OSI_model).
29 PHYs are commonly used for high speed interfaces such as Serial-ATA
30 or PCI express.
31 The API provides functions to initialize/deinitialize the
32 PHY, power on/off the PHY, and reset the PHY. It's meant to be as
33 compatible as possible with the equivalent framework found in the
34 linux kernel.
35
Jean-Jacques Hiblot86322f52017-04-24 11:51:28 +0200[diff] [blame]36config PHY_SANDBOX
37 bool "Sandbox PHY support"
38 depends on SANDBOX
39 depends on PHY
40 help
41 This select a dummy sandbox PHY driver. It used only to implement
42 the unit tests for the phy framework
43
Jean-Jacques Hiblot3b63db32017-07-24 15:18:15 +0200[diff] [blame]44config NOP_PHY
45 bool "NOP PHY driver"
46 depends on PHY
47 help
48 Support for a no-op PHY driver (stubbed PHY driver).
49
50 This is useful when a driver uses the PHY framework but no real PHY
51 hardware exists.
52
53config SPL_NOP_PHY
54 bool "NOP PHY driver in SPL"
55 depends on SPL_PHY
56 help
57 Support for a no-op PHY driver (stubbed PHY driver) in the SPL.
58
59 This is useful when a driver uses the PHY framework but no real PHY
60 hardware exists.
61
Álvaro Fernández Rojas8e948c62018-02-04 21:11:15 +0100[diff] [blame]62config BCM6318_USBH_PHY
63 bool "BCM6318 USBH PHY support"
64 depends on PHY && ARCH_BMIPS
65 select POWER_DOMAIN
66 help
67 Support for the Broadcom MIPS BCM6318 USBH PHY.
68
Álvaro Fernández Rojasbcb9b502018-02-04 11:18:24 +0100[diff] [blame]69config BCM6348_USBH_PHY
70 bool "BCM6348 USBH PHY support"
71 depends on PHY && ARCH_BMIPS
72 help
73 Support for the Broadcom MIPS BCM6348 USBH PHY.
74
Álvaro Fernández Rojas190c36b2018-02-04 11:19:11 +0100[diff] [blame]75config BCM6358_USBH_PHY
76 bool "BCM6358 USBH PHY support"
77 depends on PHY && ARCH_BMIPS
78 help
79 Support for the Broadcom MIPS BCM6358 USBH PHY.
80
Álvaro Fernández Rojasf55c1532018-02-04 21:10:13 +0100[diff] [blame]81config BCM6368_USBH_PHY
82 bool "BCM6368 USBH PHY support"
83 depends on PHY && ARCH_BMIPS
84 help
85 Support for the Broadcom MIPS BCM6368 USBH PHY.
86
Adam Fordfc582632019-07-10 13:59:09 -0500[diff] [blame]87config PHY_DA8XX_USB
88 tristate "TI DA8xx USB PHY Driver"
89 depends on PHY && ARCH_DAVINCI
90 help
91 Enable this to support the USB PHY on DA8xx SoCs.
92
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200[diff] [blame]93config PIPE3_PHY
94 bool "Support omap's PIPE3 PHY"
Jean-Jacques Hiblot6b26aae2017-07-07 12:13:34 +0200[diff] [blame]95 depends on PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200[diff] [blame]96 help
97 Support for the omap PIPE3 phy for sata
98
99 This PHY is found on omap devices supporting SATA such as dra7, am57x
100 and omap5
101
102config SPL_PIPE3_PHY
103 bool "Support omap's PIPE3 PHY in SPL"
Jean-Jacques Hiblot6b26aae2017-07-07 12:13:34 +0200[diff] [blame]104 depends on SPL_PHY && ARCH_OMAP2PLUS
Jean-Jacques Hiblot982082d2017-04-24 11:51:29 +0200[diff] [blame]105 help
106 Support for the omap PIPE3 phy for sata in SPL
107
108 This PHY is found on omap devices supporting SATA such as dra7, am57x
109 and omap5
110
Sekhar Nori888e1ca2019-08-01 19:12:58 +0530[diff] [blame]111config AM654_PHY
112 tristate "TI AM654 SERDES support"
113 depends on PHY && ARCH_K3
114 select REGMAP
115 select SYSCON
116 help
117 This option enables support for TI AM654 SerDes PHY used for
118 PCIe.
119
Patrice Chotardb7ca56d2017-09-05 11:04:21 +0200[diff] [blame]120config STI_USB_PHY
121 bool "STMicroelectronics USB2 picoPHY driver for STiH407 family"
122 depends on PHY && ARCH_STI
123 help
124 This is the generic phy driver for the picoPHY ports
125 used by USB2 and USB3 Host controllers available on
126 STiH407 SoC families.
127
Marek Vasut66425882018-08-05 15:22:19 +0200[diff] [blame]128config PHY_RCAR_GEN2
129 tristate "Renesas R-Car Gen2 USB PHY"
130 depends on PHY && RCAR_GEN2
131 help
132 Support for the Renesas R-Car Gen2 USB PHY. This driver operates the
133 PHY connected to USBHS module, PCI EHCI module and USB3.0 module and
134 allows configuring the module multiplexing.
135
Marek Vasut6cfc3d62018-10-02 22:31:47 +0200[diff] [blame]136config PHY_RCAR_GEN3
137 tristate "Renesas R-Car Gen3 USB PHY"
138 depends on PHY && RCAR_GEN3 && CLK && DM_REGULATOR
139 default y if RCAR_GEN3
140 help
141 Support for the Renesas R-Car Gen3 USB PHY. This driver operates the
142 PHY connected to EHCI USB module and controls USB OTG operation.
143
Patrice Chotard3b291212018-04-27 11:01:55 +0200[diff] [blame]144config PHY_STM32_USBPHYC
145 tristate "STMicroelectronics STM32 SoC USB HS PHY driver"
146 depends on PHY && ARCH_STM32MP
147 help
148 Enable this to support the High-Speed USB transceiver that is part of
149 STMicroelectronics STM32 SoCs.
150
151 This driver controls the entire USB PHY block: the USB PHY controller
152 (USBPHYC) and the two 8-bit wide UTMI+ interface. First interface is
153 used by an HS USB Host controller, and the second one is shared
154 between an HS USB OTG controller and an HS USB Host controller,
155 selected by an USB switch.
156
Beniamino Galvanidf42f322019-08-18 15:42:54 +0200[diff] [blame]157config MESON_GXBB_USB_PHY
158 bool "Amlogic Meson GXBB USB PHY"
159 depends on PHY && ARCH_MESON && MESON_GXBB
160 imply REGMAP
161 help
162 This is the generic phy driver for the Amlogic Meson GXBB
163 USB2 PHY.
164
Neil Armstrong2960e272018-04-11 17:08:02 +0200[diff] [blame]165config MESON_GXL_USB_PHY
166 bool "Amlogic Meson GXL USB PHYs"
Neil Armstrong82548aa2019-04-03 13:46:36 +0200[diff] [blame]167 depends on PHY && ARCH_MESON && (MESON_GXL || MESON_GXM)
Neil Armstrong2960e272018-04-11 17:08:02 +0200[diff] [blame]168 imply REGMAP
169 help
170 This is the generic phy driver for the Amlogic Meson GXL
171 USB2 and USB3 PHYS.
172
Neil Armstrong277d9162019-02-19 15:17:29 +0100[diff] [blame]173config MESON_G12A_USB_PHY
174 bool "Amlogic Meson G12A USB PHYs"
175 depends on PHY && ARCH_MESON && MESON_G12A
176 imply REGMAP
177 help
178 This is the generic phy driver for the Amlogic Meson G12A
179 USB2 and USB3 PHYS.
180
Ramon Fried92454e42018-09-21 13:35:47 +0300[diff] [blame]181config MSM8916_USB_PHY
182 bool "Qualcomm MSM8916 USB PHY support"
183 depends on PHY
184 help
185 Support the USB PHY in msm8916
186
187 This PHY is found on qualcomm dragonboard410c development board.
188
Jean-Jacques Hiblot668257e2018-11-29 10:57:39 +0100[diff] [blame]189config OMAP_USB2_PHY
190 bool "Support OMAP's USB2 PHY"
191 depends on PHY
192 depends on SYSCON
193 help
194 Support for the OMAP's USB2 PHY.
195
196 This PHY is found on OMAP devices supporting USB2.
197
Jean-Jacques Hiblot4b127832018-12-04 11:12:59 +0100[diff] [blame]198
199config KEYSTONE_USB_PHY
200 bool "Support TI Keystone USB PHY"
201 depends on PHY
202 depends on ARCH_KEYSTONE
203 help
204 Support for the USB PHY found on some Keystone (k2) processors
205
206 This PHY is found on some Keystone (K2) devices supporting USB.
207
Stefan Roesed7d76062019-04-05 13:44:43 +0200[diff] [blame]208config MT76X8_USB_PHY
209 bool "MediaTek MT76x8 (7628/88) USB PHY support"
210 depends on PHY
Weijie Gao4cce5112019-09-25 17:45:31 +0800[diff] [blame]211 depends on SOC_MT7628
Stefan Roesed7d76062019-04-05 13:44:43 +0200[diff] [blame]212 help
213 Support the USB PHY in MT76x8 SoCs
214
215 This PHY is found on MT76x8 devices supporting USB.
216
Ryder Lee235bad02019-08-22 12:26:50 +0200[diff] [blame]217config PHY_MTK_TPHY
218 bool "MediaTek T-PHY Driver"
219 depends on PHY
220 depends on ARCH_MEDIATEK
221 help
222 MediaTek T-PHY driver supports usb2.0, usb3.0 ports, PCIe and
223 SATA, and meanwhile supports two version T-PHY which have
224 different banks layout, the T-PHY with shared banks between
225 multi-ports is first version, otherwise is second veriosn,
226 so you can easily distinguish them by banks layout.
227
Jagan Tekiac97a9e2020-05-26 11:33:44 +0800[diff] [blame]228source "drivers/phy/rockchip/Kconfig"
Jean-Jacques Hiblot72e50162017-04-24 11:51:27 +0200[diff] [blame]229endmenu