blob: a4c4259eeaee9339cca130415166b0d9d844eb3a [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Tom Warren873e3ef2015-02-12 15:01:49 -07002/*
Tom Warren48ba1962020-03-26 16:10:11 -07003 * (C) Copyright 2013-2019
Tom Warren873e3ef2015-02-12 15:01:49 -07004 * NVIDIA Corporation <www.nvidia.com>
Tom Warren873e3ef2015-02-12 15:01:49 -07005 */
6
7#include <common.h>
Tom Warren4132bc92015-07-28 15:13:17 -07008#include <i2c.h>
Simon Glassf7ae49f2020-05-10 11:40:05 -06009#include <log.h>
Tom Warren873e3ef2015-02-12 15:01:49 -070010#include <asm/arch/gpio.h>
11#include <asm/arch/pinmux.h>
Tom Warren66999892015-02-20 12:22:22 -070012#include <asm/gpio.h>
Tom Warren4132bc92015-07-28 15:13:17 -070013#include "max77620_init.h"
Tom Warren873e3ef2015-02-12 15:01:49 -070014
Tom Warren4132bc92015-07-28 15:13:17 -070015void pin_mux_mmc(void)
16{
17 struct udevice *dev;
18 uchar val;
19 int ret;
20
21 /* Turn on MAX77620 LDO2 to 3.3V for SD card power */
22 debug("%s: Set LDO2 for VDDIO_SDMMC_AP power to 3.3V\n", __func__);
23 ret = i2c_get_chip_for_busnum(0, MAX77620_I2C_ADDR_7BIT, 1, &dev);
24 if (ret) {
25 printf("%s: Cannot find MAX77620 I2C chip\n", __func__);
26 return;
27 }
28 /* 0xF2 for 3.3v, enabled: bit7:6 = 11 = enable, bit5:0 = voltage */
29 val = 0xF2;
30 ret = dm_i2c_write(dev, MAX77620_CNFG1_L2_REG, &val, 1);
31 if (ret)
32 printf("i2c_write 0 0x3c 0x27 failed: %d\n", ret);
33}
34
Tom Warren873e3ef2015-02-12 15:01:49 -070035/*
Tom Warren66999892015-02-20 12:22:22 -070036 * Routine: start_cpu_fan
37 * Description: Enable/start PWM CPU fan on P2571
38 */
39void start_cpu_fan(void)
40{
41 /* GPIO_PE4 is PS_VDD_FAN_ENABLE */
Stephen Warren01a97a12016-05-12 12:07:39 -060042 gpio_request(TEGRA_GPIO(E, 4), "FAN_VDD");
43 gpio_direction_output(TEGRA_GPIO(E, 4), 1);
Tom Warren66999892015-02-20 12:22:22 -070044}