blob: d8e32508d4868d849370a186af08d432d021af38 [file] [log] [blame]
Ang, Chee Hongc41e6602018-12-19 18:35:14 -08001// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Copyright (C) 2018 Intel Corporation <www.intel.com>
4 */
5
6#include <common.h>
7#include <altera.h>
8#include <asm/arch/mailbox_s10.h>
9
10#define RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS 60000
11#define RECONFIG_STATUS_INTERVAL_DELAY_US 1000000
12
13static const struct mbox_cfgstat_state {
14 int err_no;
15 const char *error_name;
16} mbox_cfgstat_state[] = {
17 {MBOX_CFGSTAT_STATE_IDLE, "FPGA in idle mode."},
18 {MBOX_CFGSTAT_STATE_CONFIG, "FPGA in config mode."},
19 {MBOX_CFGSTAT_STATE_FAILACK, "Acknowledgment failed!"},
20 {MBOX_CFGSTAT_STATE_ERROR_INVALID, "Invalid bitstream!"},
21 {MBOX_CFGSTAT_STATE_ERROR_CORRUPT, "Corrupted bitstream!"},
22 {MBOX_CFGSTAT_STATE_ERROR_AUTH, "Authentication failed!"},
23 {MBOX_CFGSTAT_STATE_ERROR_CORE_IO, "I/O error!"},
24 {MBOX_CFGSTAT_STATE_ERROR_HARDWARE, "Hardware error!"},
25 {MBOX_CFGSTAT_STATE_ERROR_FAKE, "Fake error!"},
26 {MBOX_CFGSTAT_STATE_ERROR_BOOT_INFO, "Error in boot info!"},
27 {MBOX_CFGSTAT_STATE_ERROR_QSPI_ERROR, "Error in QSPI!"},
28 {MBOX_RESP_ERROR, "Mailbox general error!"},
29 {-ETIMEDOUT, "I/O timeout error"},
30 {-1, "Unknown error!"}
31};
32
33#define MBOX_CFGSTAT_MAX ARRAY_SIZE(mbox_cfgstat_state)
34
35static const char *mbox_cfgstat_to_str(int err)
36{
37 int i;
38
39 for (i = 0; i < MBOX_CFGSTAT_MAX - 1; i++) {
40 if (mbox_cfgstat_state[i].err_no == err)
41 return mbox_cfgstat_state[i].error_name;
42 }
43
44 return mbox_cfgstat_state[MBOX_CFGSTAT_MAX - 1].error_name;
45}
46
47/*
48 * Add the ongoing transaction's command ID into pending list and return
49 * the command ID for next transfer.
50 */
51static u8 add_transfer(u32 *xfer_pending_list, size_t list_size, u8 id)
52{
53 int i;
54
55 for (i = 0; i < list_size; i++) {
56 if (xfer_pending_list[i])
57 continue;
58 xfer_pending_list[i] = id;
59 debug("ID(%d) added to transaction pending list\n", id);
60 /*
61 * Increment command ID for next transaction.
62 * Valid command ID (4 bits) is from 1 to 15.
63 */
64 id = (id % 15) + 1;
65 break;
66 }
67
68 return id;
69}
70
71/*
72 * Check whether response ID match the command ID in the transfer
73 * pending list. If a match is found in the transfer pending list,
74 * it clears the transfer pending list and return the matched
75 * command ID.
76 */
77static int get_and_clr_transfer(u32 *xfer_pending_list, size_t list_size,
78 u8 id)
79{
80 int i;
81
82 for (i = 0; i < list_size; i++) {
83 if (id != xfer_pending_list[i])
84 continue;
85 xfer_pending_list[i] = 0;
86 return id;
87 }
88
89 return 0;
90}
91
92/*
93 * Polling the FPGA configuration status.
94 * Return 0 for success, non-zero for error.
95 */
96static int reconfig_status_polling_resp(void)
97{
98 int ret;
99 unsigned long start = get_timer(0);
100
101 while (1) {
102 ret = mbox_get_fpga_config_status(MBOX_RECONFIG_STATUS);
103 if (!ret)
104 return 0; /* configuration success */
105
106 if (ret != MBOX_CFGSTAT_STATE_CONFIG)
107 return ret;
108
109 if (get_timer(start) > RECONFIG_STATUS_POLL_RESP_TIMEOUT_MS)
110 break; /* time out */
111
112 puts(".");
113 udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
114 }
115
116 return -ETIMEDOUT;
117}
118
119static u32 get_resp_hdr(u32 *r_index, u32 *w_index, u32 *resp_count,
120 u32 *resp_buf, u32 buf_size, u32 client_id)
121{
122 u32 buf[MBOX_RESP_BUFFER_SIZE];
123 u32 mbox_hdr;
124 u32 resp_len;
125 u32 hdr_len;
126 u32 i;
127
128 if (*resp_count < buf_size) {
129 u32 rcv_len_max = buf_size - *resp_count;
130
131 if (rcv_len_max > MBOX_RESP_BUFFER_SIZE)
132 rcv_len_max = MBOX_RESP_BUFFER_SIZE;
133 resp_len = mbox_rcv_resp(buf, rcv_len_max);
134
135 for (i = 0; i < resp_len; i++) {
136 resp_buf[(*w_index)++] = buf[i];
137 *w_index %= buf_size;
138 (*resp_count)++;
139 }
140 }
141
142 /* No response in buffer */
143 if (*resp_count == 0)
144 return 0;
145
146 mbox_hdr = resp_buf[*r_index];
147
148 hdr_len = MBOX_RESP_LEN_GET(mbox_hdr);
149
150 /* Insufficient header length to return a mailbox header */
151 if ((*resp_count - 1) < hdr_len)
152 return 0;
153
154 *r_index += (hdr_len + 1);
155 *r_index %= buf_size;
156 *resp_count -= (hdr_len + 1);
157
158 /* Make sure response belongs to us */
159 if (MBOX_RESP_CLIENT_GET(mbox_hdr) != client_id)
160 return 0;
161
162 return mbox_hdr;
163}
164
165/* Send bit stream data to SDM via RECONFIG_DATA mailbox command */
166static int send_reconfig_data(const void *rbf_data, size_t rbf_size,
167 u32 xfer_max, u32 buf_size_max)
168{
169 u32 response_buffer[MBOX_RESP_BUFFER_SIZE];
170 u32 xfer_pending[MBOX_RESP_BUFFER_SIZE];
171 u32 resp_rindex = 0;
172 u32 resp_windex = 0;
173 u32 resp_count = 0;
174 u32 xfer_count = 0;
Ang, Chee Hong5097ba62019-02-17 20:07:50 -0800175 int resp_err = 0;
Ang, Chee Hongc41e6602018-12-19 18:35:14 -0800176 u8 cmd_id = 1;
177 u32 args[3];
178 int ret;
179
180 debug("SDM xfer_max = %d\n", xfer_max);
181 debug("SDM buf_size_max = %x\n\n", buf_size_max);
182
183 memset(xfer_pending, 0, sizeof(xfer_pending));
184
185 while (rbf_size || xfer_count) {
186 if (!resp_err && rbf_size && xfer_count < xfer_max) {
187 args[0] = MBOX_ARG_DESC_COUNT(1);
188 args[1] = (u64)rbf_data;
189 if (rbf_size >= buf_size_max) {
190 args[2] = buf_size_max;
191 rbf_size -= buf_size_max;
192 rbf_data += buf_size_max;
193 } else {
194 args[2] = (u64)rbf_size;
195 rbf_size = 0;
196 }
197
Ang, Chee Hong5097ba62019-02-17 20:07:50 -0800198 resp_err = mbox_send_cmd_only(cmd_id, MBOX_RECONFIG_DATA,
Ang, Chee Hongc41e6602018-12-19 18:35:14 -0800199 MBOX_CMD_INDIRECT, 3, args);
Ang, Chee Hong5097ba62019-02-17 20:07:50 -0800200 if (!resp_err) {
Ang, Chee Hongc41e6602018-12-19 18:35:14 -0800201 xfer_count++;
202 cmd_id = add_transfer(xfer_pending,
203 MBOX_RESP_BUFFER_SIZE,
204 cmd_id);
205 }
206 puts(".");
207 } else {
208 u32 resp_hdr = get_resp_hdr(&resp_rindex, &resp_windex,
209 &resp_count,
210 response_buffer,
211 MBOX_RESP_BUFFER_SIZE,
212 MBOX_CLIENT_ID_UBOOT);
213
214 /*
215 * If no valid response header found or
216 * non-zero length from RECONFIG_DATA
217 */
218 if (!resp_hdr || MBOX_RESP_LEN_GET(resp_hdr))
219 continue;
220
221 /* Check for response's status */
222 if (!resp_err) {
Ang, Chee Hong5097ba62019-02-17 20:07:50 -0800223 resp_err = MBOX_RESP_ERR_GET(resp_hdr);
224 debug("Response error code: %08x\n", resp_err);
Ang, Chee Hongc41e6602018-12-19 18:35:14 -0800225 }
226
227 ret = get_and_clr_transfer(xfer_pending,
228 MBOX_RESP_BUFFER_SIZE,
229 MBOX_RESP_ID_GET(resp_hdr));
230 if (ret) {
231 /* Claim and reuse the ID */
232 cmd_id = (u8)ret;
233 xfer_count--;
234 }
235
236 if (resp_err && !xfer_count)
Ang, Chee Hong5097ba62019-02-17 20:07:50 -0800237 return resp_err;
Ang, Chee Hongc41e6602018-12-19 18:35:14 -0800238 }
239 }
240
241 return 0;
242}
243
244/*
245 * This is the interface used by FPGA driver.
246 * Return 0 for success, non-zero for error.
247 */
248int stratix10_load(Altera_desc *desc, const void *rbf_data, size_t rbf_size)
249{
250 int ret;
251 u32 resp_len = 2;
252 u32 resp_buf[2];
253
254 debug("Sending MBOX_RECONFIG...\n");
255 ret = mbox_send_cmd(MBOX_ID_UBOOT, MBOX_RECONFIG, MBOX_CMD_DIRECT, 0,
256 NULL, 0, &resp_len, resp_buf);
257 if (ret) {
258 puts("Failure in RECONFIG mailbox command!\n");
259 return ret;
260 }
261
262 ret = send_reconfig_data(rbf_data, rbf_size, resp_buf[0], resp_buf[1]);
263 if (ret) {
264 printf("RECONFIG_DATA error: %08x, %s\n", ret,
265 mbox_cfgstat_to_str(ret));
266 return ret;
267 }
268
269 /* Make sure we don't send MBOX_RECONFIG_STATUS too fast */
270 udelay(RECONFIG_STATUS_INTERVAL_DELAY_US);
271
272 debug("Polling with MBOX_RECONFIG_STATUS...\n");
273 ret = reconfig_status_polling_resp();
274 if (ret) {
275 printf("RECONFIG_STATUS Error: %08x, %s\n", ret,
276 mbox_cfgstat_to_str(ret));
277 return ret;
278 }
279
280 puts("FPGA reconfiguration OK!\n");
281
282 return ret;
283}