blob: 6b28e28b3f86c3c643cd9beb0c8b9d1403fd5a63 [file] [log] [blame]
Piotr Wilczek04750442013-09-24 16:31:22 +02001/*
2 * Copyright (C) 2013 Samsung Electronics
3 * Piotr Wilczek <p.wilczek@samsung.com>
4 *
5 * SPDX-License-Identifier: GPL-2.0+
6 */
7
8#include <common.h>
9#include <power/pmic.h>
10#include <power/max77693_pmic.h>
11#include <i2c.h>
12#include <errno.h>
13
14static int max77693_charger_state(struct pmic *p, int state, int current)
15{
16 unsigned int val;
17
18 if (pmic_probe(p))
19 return -1;
20
21 /* unlock write capability */
22 val = MAX77693_CHG_UNLOCK;
23 pmic_reg_write(p, MAX77693_CHG_CNFG_06, val);
24
Simon Glass78a36c32014-05-20 06:01:35 -060025 if (state == PMIC_CHARGER_DISABLE) {
Piotr Wilczek04750442013-09-24 16:31:22 +020026 puts("Disable the charger.\n");
27 pmic_reg_read(p, MAX77693_CHG_CNFG_00, &val);
28 val &= ~0x01;
29 pmic_reg_write(p, MAX77693_CHG_CNFG_00, val);
30 return -1;
31 }
32
33 if (current < CHARGER_MIN_CURRENT || current > CHARGER_MAX_CURRENT) {
34 printf("%s: Wrong charge current: %d [mA]\n",
35 __func__, current);
36 return -1;
37 }
38
39 /* set charging current */
40 pmic_reg_read(p, MAX77693_CHG_CNFG_02, &val);
41 val &= ~MAX77693_CHG_CC;
42 val |= current * 10 / 333; /* 0.1A/3 steps */
43 pmic_reg_write(p, MAX77693_CHG_CNFG_02, val);
44
45 /* enable charging */
46 val = MAX77693_CHG_MODE_ON;
47 pmic_reg_write(p, MAX77693_CHG_CNFG_00, val);
48
49 /* check charging current */
50 pmic_reg_read(p, MAX77693_CHG_CNFG_02, &val);
51 val &= 0x3f;
52 printf("Enable the charger @ %d [mA]\n", val * 333 / 10);
53
54 return 0;
55}
56
57static int max77693_charger_bat_present(struct pmic *p)
58{
59 unsigned int val;
60
61 if (pmic_probe(p))
62 return -1;
63
64 pmic_reg_read(p, MAX77693_CHG_INT_OK, &val);
65
66 return !(val & MAX77693_CHG_DETBAT);
67}
68
69static struct power_chrg power_chrg_pmic_ops = {
70 .chrg_bat_present = max77693_charger_bat_present,
71 .chrg_state = max77693_charger_state,
72};
73
74int pmic_init_max77693(unsigned char bus)
75{
76 static const char name[] = "MAX77693_PMIC";
77 struct pmic *p = pmic_alloc();
78
79 if (!p) {
80 printf("%s: POWER allocation error!\n", __func__);
81 return -ENOMEM;
82 }
83
84 debug("Board PMIC init\n");
85
86 p->name = name;
87 p->interface = PMIC_I2C;
88 p->number_of_regs = PMIC_NUM_OF_REGS;
89 p->hw.i2c.addr = MAX77693_PMIC_I2C_ADDR;
90 p->hw.i2c.tx_num = 1;
91 p->bus = bus;
92
93 p->chrg = &power_chrg_pmic_ops;
94
95 return 0;
96}