Lars Povlsen | be8313f | 2019-01-02 09:52:21 +0100 | [diff] [blame] | 1 | // SPDX-License-Identifier: (GPL-2.0 OR MIT) |
| 2 | /* |
| 3 | * Microsemi SoCs serial gpio driver |
| 4 | * |
| 5 | * Author: <lars.povlsen@microchip.com> |
| 6 | * |
| 7 | * Copyright (c) 2018 Microsemi Corporation |
| 8 | */ |
| 9 | |
| 10 | #include <common.h> |
| 11 | #include <dm.h> |
| 12 | #include <asm/gpio.h> |
| 13 | #include <asm/io.h> |
| 14 | #include <errno.h> |
| 15 | #include <clk.h> |
| 16 | |
| 17 | #define MSCC_SGPIOS_PER_BANK 32 |
| 18 | #define MSCC_SGPIO_BANK_DEPTH 4 |
| 19 | |
| 20 | enum { |
| 21 | REG_INPUT_DATA, |
| 22 | REG_PORT_CONFIG, |
| 23 | REG_PORT_ENABLE, |
| 24 | REG_SIO_CONFIG, |
| 25 | REG_SIO_CLOCK, |
| 26 | MAXREG |
| 27 | }; |
| 28 | |
| 29 | struct mscc_sgpio_bf { |
| 30 | u8 beg; |
| 31 | u8 end; |
| 32 | }; |
| 33 | |
| 34 | struct mscc_sgpio_props { |
| 35 | u8 regoff[MAXREG]; |
| 36 | struct mscc_sgpio_bf auto_repeat; |
| 37 | struct mscc_sgpio_bf port_width; |
| 38 | struct mscc_sgpio_bf clk_freq; |
| 39 | struct mscc_sgpio_bf bit_source; |
| 40 | }; |
| 41 | |
| 42 | #define __M(bf) GENMASK((bf).end, (bf).beg) |
| 43 | #define __F(bf, x) (__M(bf) & ((x) << (bf).beg)) |
| 44 | #define __X(bf, x) (((x) >> (bf).beg) & GENMASK(((bf).end - (bf).beg), 0)) |
| 45 | |
| 46 | #define MSCC_M_CFG_SIO_AUTO_REPEAT(p) BIT(p->props->auto_repeat.beg) |
| 47 | #define MSCC_F_CFG_SIO_PORT_WIDTH(p, x) __F(p->props->port_width, x) |
| 48 | #define MSCC_M_CFG_SIO_PORT_WIDTH(p) __M(p->props->port_width) |
| 49 | #define MSCC_F_CLOCK_SIO_CLK_FREQ(p, x) __F(p->props->clk_freq, x) |
| 50 | #define MSCC_M_CLOCK_SIO_CLK_FREQ(p) __M(p->props->clk_freq) |
| 51 | #define MSCC_F_PORT_CFG_BIT_SOURCE(p, x) __F(p->props->bit_source, x) |
| 52 | #define MSCC_X_PORT_CFG_BIT_SOURCE(p, x) __X(p->props->bit_source, x) |
| 53 | |
| 54 | const struct mscc_sgpio_props props_luton = { |
| 55 | .regoff = { 0x00, 0x09, 0x29, 0x2a, 0x2b }, |
| 56 | .auto_repeat = { 5, 5 }, |
| 57 | .port_width = { 2, 3 }, |
| 58 | .clk_freq = { 0, 11 }, |
| 59 | .bit_source = { 0, 11 }, |
| 60 | }; |
| 61 | |
| 62 | const struct mscc_sgpio_props props_ocelot = { |
| 63 | .regoff = { 0x00, 0x06, 0x26, 0x04, 0x05 }, |
| 64 | .auto_repeat = { 10, 10 }, |
| 65 | .port_width = { 7, 8 }, |
| 66 | .clk_freq = { 8, 19 }, |
| 67 | .bit_source = { 12, 23 }, |
| 68 | }; |
| 69 | |
| 70 | struct mscc_sgpio_priv { |
| 71 | u32 bitcount; |
| 72 | u32 ports; |
| 73 | u32 clock; |
| 74 | u32 mode[MSCC_SGPIOS_PER_BANK]; |
| 75 | u32 __iomem *regs; |
| 76 | const struct mscc_sgpio_props *props; |
| 77 | }; |
| 78 | |
| 79 | static inline u32 sgpio_readl(struct mscc_sgpio_priv *priv, u32 rno, u32 off) |
| 80 | { |
| 81 | u32 __iomem *reg = &priv->regs[priv->props->regoff[rno] + off]; |
| 82 | |
| 83 | return readl(reg); |
| 84 | } |
| 85 | |
| 86 | static inline void sgpio_writel(struct mscc_sgpio_priv *priv, |
| 87 | u32 val, u32 rno, u32 off) |
| 88 | { |
| 89 | u32 __iomem *reg = &priv->regs[priv->props->regoff[rno] + off]; |
| 90 | |
| 91 | writel(val, reg); |
| 92 | } |
| 93 | |
| 94 | static void sgpio_clrsetbits(struct mscc_sgpio_priv *priv, |
| 95 | u32 rno, u32 off, u32 clear, u32 set) |
| 96 | { |
| 97 | u32 __iomem *reg = &priv->regs[priv->props->regoff[rno] + off]; |
| 98 | |
| 99 | clrsetbits_le32(reg, clear, set); |
| 100 | } |
| 101 | |
| 102 | static int mscc_sgpio_direction_input(struct udevice *dev, unsigned int gpio) |
| 103 | { |
| 104 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); |
| 105 | |
| 106 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; |
| 107 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; |
| 108 | |
| 109 | priv->mode[port] |= BIT(bit); |
| 110 | |
| 111 | return 0; |
| 112 | } |
| 113 | |
| 114 | static int mscc_sgpio_direction_output(struct udevice *dev, |
| 115 | unsigned int gpio, int value) |
| 116 | { |
| 117 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); |
| 118 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; |
| 119 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; |
| 120 | u32 mask = 3 << (3 * bit); |
| 121 | |
| 122 | debug("set: port %d, bit %d, mask 0x%08x, value %d\n", |
| 123 | port, bit, mask, value); |
| 124 | |
| 125 | value = (value & 3) << (3 * bit); |
| 126 | sgpio_clrsetbits(priv, REG_PORT_CONFIG, port, |
| 127 | MSCC_F_PORT_CFG_BIT_SOURCE(priv, mask), |
| 128 | MSCC_F_PORT_CFG_BIT_SOURCE(priv, value)); |
| 129 | clrbits_le32(&priv->mode[port], BIT(bit)); |
| 130 | |
| 131 | return 0; |
| 132 | } |
| 133 | |
| 134 | static int mscc_sgpio_get_function(struct udevice *dev, unsigned int gpio) |
| 135 | { |
| 136 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); |
| 137 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; |
| 138 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; |
| 139 | u32 val = priv->mode[port] & BIT(bit); |
| 140 | |
| 141 | if (val) |
| 142 | return GPIOF_INPUT; |
| 143 | else |
| 144 | return GPIOF_OUTPUT; |
| 145 | } |
| 146 | |
| 147 | static int mscc_sgpio_set_value(struct udevice *dev, |
| 148 | unsigned int gpio, int value) |
| 149 | { |
| 150 | return mscc_sgpio_direction_output(dev, gpio, value); |
| 151 | } |
| 152 | |
| 153 | static int mscc_sgpio_get_value(struct udevice *dev, unsigned int gpio) |
| 154 | { |
| 155 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); |
| 156 | u32 port = gpio % MSCC_SGPIOS_PER_BANK; |
| 157 | u32 bit = gpio / MSCC_SGPIOS_PER_BANK; |
| 158 | int ret; |
| 159 | |
| 160 | if (mscc_sgpio_get_function(dev, gpio) == GPIOF_INPUT) { |
| 161 | ret = !!(sgpio_readl(priv, REG_INPUT_DATA, bit) & BIT(port)); |
| 162 | } else { |
| 163 | u32 portval = sgpio_readl(priv, REG_PORT_CONFIG, port); |
| 164 | |
| 165 | ret = MSCC_X_PORT_CFG_BIT_SOURCE(priv, portval); |
| 166 | ret = !!(ret & (3 << (3 * bit))); |
| 167 | } |
| 168 | |
| 169 | debug("get: gpio %d, port %d, bit %d, value %d\n", |
| 170 | gpio, port, bit, ret); |
| 171 | return ret; |
| 172 | } |
| 173 | |
| 174 | static int mscc_sgpio_get_count(struct udevice *dev) |
| 175 | { |
| 176 | struct ofnode_phandle_args args; |
| 177 | int count = 0, i = 0, ret; |
| 178 | |
| 179 | ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, i, &args); |
| 180 | while (ret != -ENOENT) { |
| 181 | count += args.args[2]; |
| 182 | ret = dev_read_phandle_with_args(dev, "gpio-ranges", NULL, 3, |
| 183 | ++i, &args); |
| 184 | } |
| 185 | return count; |
| 186 | } |
| 187 | |
| 188 | static int mscc_sgpio_probe(struct udevice *dev) |
| 189 | { |
| 190 | struct gpio_dev_priv *uc_priv = dev_get_uclass_priv(dev); |
| 191 | struct mscc_sgpio_priv *priv = dev_get_priv(dev); |
| 192 | int err, div_clock = 0, port; |
| 193 | u32 val; |
| 194 | struct clk clk; |
| 195 | |
| 196 | err = clk_get_by_index(dev, 0, &clk); |
| 197 | if (!err) { |
| 198 | err = clk_get_rate(&clk); |
| 199 | if (IS_ERR_VALUE(err)) { |
| 200 | dev_err(dev, "Invalid clk rate\n"); |
| 201 | return -EINVAL; |
| 202 | } |
| 203 | div_clock = err; |
| 204 | } else { |
| 205 | dev_err(dev, "Failed to get clock\n"); |
| 206 | return err; |
| 207 | } |
| 208 | |
| 209 | priv->props = (const struct mscc_sgpio_props *)dev_get_driver_data(dev); |
| 210 | priv->ports = dev_read_u32_default(dev, "mscc,sgpio-ports", 0xFFFFFFFF); |
| 211 | priv->clock = dev_read_u32_default(dev, "mscc,sgpio-frequency", |
| 212 | 12500000); |
| 213 | if (priv->clock <= 0 || priv->clock > div_clock) { |
| 214 | dev_err(dev, "Invalid frequency %d\n", priv->clock); |
| 215 | return -EINVAL; |
| 216 | } |
| 217 | |
| 218 | uc_priv->gpio_count = mscc_sgpio_get_count(dev); |
| 219 | uc_priv->gpio_count = dev_read_u32_default(dev, "ngpios", |
| 220 | uc_priv->gpio_count); |
| 221 | if (uc_priv->gpio_count < 1 || uc_priv->gpio_count > |
| 222 | (4 * MSCC_SGPIOS_PER_BANK)) { |
| 223 | dev_err(dev, "Invalid gpio count %d\n", uc_priv->gpio_count); |
| 224 | return -EINVAL; |
| 225 | } |
| 226 | priv->bitcount = DIV_ROUND_UP(uc_priv->gpio_count, |
| 227 | MSCC_SGPIOS_PER_BANK); |
| 228 | debug("probe: gpios = %d, bit-count = %d\n", |
| 229 | uc_priv->gpio_count, priv->bitcount); |
| 230 | |
| 231 | priv->regs = (u32 __iomem *)dev_read_addr(dev); |
| 232 | uc_priv->bank_name = "sgpio"; |
| 233 | |
| 234 | sgpio_clrsetbits(priv, REG_SIO_CONFIG, 0, |
| 235 | MSCC_M_CFG_SIO_PORT_WIDTH(priv), |
| 236 | MSCC_F_CFG_SIO_PORT_WIDTH(priv, priv->bitcount - 1) | |
| 237 | MSCC_M_CFG_SIO_AUTO_REPEAT(priv)); |
| 238 | val = div_clock / priv->clock; |
| 239 | debug("probe: div-clock = %d KHz, freq = %d KHz, div = %d\n", |
| 240 | div_clock / 1000, priv->clock / 1000, val); |
| 241 | sgpio_clrsetbits(priv, REG_SIO_CLOCK, 0, |
| 242 | MSCC_M_CLOCK_SIO_CLK_FREQ(priv), |
| 243 | MSCC_F_CLOCK_SIO_CLK_FREQ(priv, val)); |
| 244 | |
| 245 | for (port = 0; port < 32; port++) |
| 246 | sgpio_writel(priv, 0, REG_PORT_CONFIG, port); |
| 247 | sgpio_writel(priv, priv->ports, REG_PORT_ENABLE, 0); |
| 248 | |
| 249 | debug("probe: sgpio regs = %p\n", priv->regs); |
| 250 | |
| 251 | return 0; |
| 252 | } |
| 253 | |
| 254 | static const struct dm_gpio_ops mscc_sgpio_ops = { |
| 255 | .direction_input = mscc_sgpio_direction_input, |
| 256 | .direction_output = mscc_sgpio_direction_output, |
| 257 | .get_function = mscc_sgpio_get_function, |
| 258 | .get_value = mscc_sgpio_get_value, |
| 259 | .set_value = mscc_sgpio_set_value, |
| 260 | }; |
| 261 | |
| 262 | static const struct udevice_id mscc_sgpio_ids[] = { |
| 263 | { .compatible = "mscc,luton-sgpio", .data = (ulong)&props_luton }, |
| 264 | { .compatible = "mscc,ocelot-sgpio", .data = (ulong)&props_ocelot }, |
| 265 | { } |
| 266 | }; |
| 267 | |
| 268 | U_BOOT_DRIVER(gpio_mscc_sgpio) = { |
| 269 | .name = "mscc-sgpio", |
| 270 | .id = UCLASS_GPIO, |
| 271 | .of_match = mscc_sgpio_ids, |
| 272 | .ops = &mscc_sgpio_ops, |
| 273 | .probe = mscc_sgpio_probe, |
| 274 | .priv_auto_alloc_size = sizeof(struct mscc_sgpio_priv), |
| 275 | }; |