blob: e36b676643858b3e720f3c01739deebf9c41a8a3 [file] [log] [blame]
Stefan Roese1eac2a72006-11-29 15:42:37 +01001/*
2 * (C) Copyright 2000
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 *
23 */
24/* PCI.c - PCI functions */
25
26
27#include <common.h>
28#ifdef CONFIG_PCI
29#include <pci.h>
30
31#ifdef CONFIG_PCI_PNP
32void pciauto_config_init(struct pci_controller *hose);
33int pciauto_region_allocate(struct pci_region* res, unsigned int size, unsigned int *bar);
34#endif
35
36#include "../../Marvell/include/pci.h"
37
38#undef DEBUG
39#undef IDE_SET_NATIVE_MODE
40static unsigned int local_buses[] = { 0, 0 };
41
42static const unsigned char pci_irq_swizzle[2][PCI_MAX_DEVICES] = {
43 {0, 0, 0, 0, 0, 0, 0, 27, 27, [9 ... PCI_MAX_DEVICES - 1] = 0 },
44 {0, 0, 0, 0, 0, 0, 0, 29, 29, [9 ... PCI_MAX_DEVICES - 1] = 0 },
45};
46
47#ifdef CONFIG_USE_CPCIDVI
48typedef struct {
49 unsigned int base;
50 unsigned int init;
51} GT_CPCIDVI_ROM_T;
52
53static GT_CPCIDVI_ROM_T gt_cpcidvi_rom = {0, 0};
54#endif
55
56#ifdef DEBUG
57static const unsigned int pci_bus_list[] = { PCI_0_MODE, PCI_1_MODE };
58static void gt_pci_bus_mode_display (PCI_HOST host)
59{
60 unsigned int mode;
61
62
63 mode = (GTREGREAD (pci_bus_list[host]) & (BIT4 | BIT5)) >> 4;
64 switch (mode) {
65 case 0:
66 printf ("PCI %d bus mode: Conventional PCI\n", host);
67 break;
68 case 1:
Wolfgang Denk8ed44d92008-10-19 02:35:50 +020069 printf ("PCI %d bus mode: 66 MHz PCIX\n", host);
Stefan Roese1eac2a72006-11-29 15:42:37 +010070 break;
71 case 2:
Wolfgang Denk8ed44d92008-10-19 02:35:50 +020072 printf ("PCI %d bus mode: 100 MHz PCIX\n", host);
Stefan Roese1eac2a72006-11-29 15:42:37 +010073 break;
74 case 3:
Wolfgang Denk8ed44d92008-10-19 02:35:50 +020075 printf ("PCI %d bus mode: 133 MHz PCIX\n", host);
Stefan Roese1eac2a72006-11-29 15:42:37 +010076 break;
77 default:
78 printf ("Unknown BUS %d\n", mode);
79 }
80}
81#endif
82
83static const unsigned int pci_p2p_configuration_reg[] = {
84 PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
85};
86
87static const unsigned int pci_configuration_address[] = {
88 PCI_0CONFIGURATION_ADDRESS, PCI_1CONFIGURATION_ADDRESS
89};
90
91static const unsigned int pci_configuration_data[] = {
92 PCI_0CONFIGURATION_DATA_VIRTUAL_REGISTER,
93 PCI_1CONFIGURATION_DATA_VIRTUAL_REGISTER
94};
95
96static const unsigned int pci_error_cause_reg[] = {
97 PCI_0ERROR_CAUSE, PCI_1ERROR_CAUSE
98};
99
100static const unsigned int pci_arbiter_control[] = {
101 PCI_0ARBITER_CONTROL, PCI_1ARBITER_CONTROL
102};
103
104static const unsigned int pci_address_space_en[] = {
105 PCI_0_BASE_ADDR_REG_ENABLE, PCI_1_BASE_ADDR_REG_ENABLE
106};
107
108static const unsigned int pci_snoop_control_base_0_low[] = {
109 PCI_0SNOOP_CONTROL_BASE_0_LOW, PCI_1SNOOP_CONTROL_BASE_0_LOW
110};
111static const unsigned int pci_snoop_control_top_0[] = {
112 PCI_0SNOOP_CONTROL_TOP_0, PCI_1SNOOP_CONTROL_TOP_0
113};
114
115static const unsigned int pci_access_control_base_0_low[] = {
116 PCI_0ACCESS_CONTROL_BASE_0_LOW, PCI_1ACCESS_CONTROL_BASE_0_LOW
117};
118static const unsigned int pci_access_control_top_0[] = {
119 PCI_0ACCESS_CONTROL_TOP_0, PCI_1ACCESS_CONTROL_TOP_0
120};
121
122static const unsigned int pci_scs_bank_size[2][4] = {
123 {PCI_0SCS_0_BANK_SIZE, PCI_0SCS_1_BANK_SIZE,
124 PCI_0SCS_2_BANK_SIZE, PCI_0SCS_3_BANK_SIZE},
125 {PCI_1SCS_0_BANK_SIZE, PCI_1SCS_1_BANK_SIZE,
126 PCI_1SCS_2_BANK_SIZE, PCI_1SCS_3_BANK_SIZE}
127};
128
129static const unsigned int pci_p2p_configuration[] = {
130 PCI_0P2P_CONFIGURATION, PCI_1P2P_CONFIGURATION
131};
132
133
134/********************************************************************
135* pciWriteConfigReg - Write to a PCI configuration register
136* - Make sure the GT is configured as a master before writing
137* to another device on the PCI.
138* - The function takes care of Big/Little endian conversion.
139*
140*
141* Inputs: unsigned int regOffset: The register offset as it apears in the GT spec
142* (or any other PCI device spec)
143* pciDevNum: The device number needs to be addressed.
144*
145* Configuration Address 0xCF8:
146*
147* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
148* |congif|Reserved| Bus |Device|Function|Register|00|
149* |Enable| |Number|Number| Number | Number | | <=field Name
150*
151*********************************************************************/
152void pciWriteConfigReg (PCI_HOST host, unsigned int regOffset,
153 unsigned int pciDevNum, unsigned int data)
154{
155 volatile unsigned int DataForAddrReg;
156 unsigned int functionNum;
157 unsigned int busNum = 0;
158 unsigned int addr;
159
160 if (pciDevNum > 32) /* illegal device Number */
161 return;
162 if (pciDevNum == SELF) { /* configure our configuration space. */
163 pciDevNum =
164 (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
165 0x1f;
166 busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
167 0xff0000;
168 }
169 functionNum = regOffset & 0x00000700;
170 pciDevNum = pciDevNum << 11;
171 regOffset = regOffset & 0xfc;
172 DataForAddrReg =
173 (regOffset | pciDevNum | functionNum | busNum) | BIT31;
174 GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
175 GT_REG_READ (pci_configuration_address[host], &addr);
176 if (addr != DataForAddrReg)
177 return;
178 GT_REG_WRITE (pci_configuration_data[host], data);
179}
180
181/********************************************************************
182* pciReadConfigReg - Read from a PCI0 configuration register
183* - Make sure the GT is configured as a master before reading
184* from another device on the PCI.
185* - The function takes care of Big/Little endian conversion.
186* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
187* spec)
188* pciDevNum: The device number needs to be addressed.
189* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
190* cause register to make sure the data is valid
191*
192* Configuration Address 0xCF8:
193*
194* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
195* |congif|Reserved| Bus |Device|Function|Register|00|
196* |Enable| |Number|Number| Number | Number | | <=field Name
197*
198*********************************************************************/
199unsigned int pciReadConfigReg (PCI_HOST host, unsigned int regOffset,
200 unsigned int pciDevNum)
201{
202 volatile unsigned int DataForAddrReg;
203 unsigned int data;
204 unsigned int functionNum;
205 unsigned int busNum = 0;
206
207 if (pciDevNum > 32) /* illegal device Number */
208 return 0xffffffff;
209 if (pciDevNum == SELF) { /* configure our configuration space. */
210 pciDevNum =
211 (GTREGREAD (pci_p2p_configuration_reg[host]) >> 24) &
212 0x1f;
213 busNum = GTREGREAD (pci_p2p_configuration_reg[host]) &
214 0xff0000;
215 }
216 functionNum = regOffset & 0x00000700;
217 pciDevNum = pciDevNum << 11;
218 regOffset = regOffset & 0xfc;
219 DataForAddrReg =
220 (regOffset | pciDevNum | functionNum | busNum) | BIT31;
221 GT_REG_WRITE (pci_configuration_address[host], DataForAddrReg);
222 GT_REG_READ (pci_configuration_address[host], &data);
223 if (data != DataForAddrReg)
224 return 0xffffffff;
225 GT_REG_READ (pci_configuration_data[host], &data);
226 return data;
227}
228
229/********************************************************************
230* pciOverBridgeWriteConfigReg - Write to a PCI configuration register where
231* the agent is placed on another Bus. For more
232* information read P2P in the PCI spec.
233*
234* Inputs: unsigned int regOffset - The register offset as it apears in the
235* GT spec (or any other PCI device spec).
236* unsigned int pciDevNum - The device number needs to be addressed.
237* unsigned int busNum - On which bus does the Target agent connect
238* to.
239* unsigned int data - data to be written.
240*
241* Configuration Address 0xCF8:
242*
243* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
244* |congif|Reserved| Bus |Device|Function|Register|01|
245* |Enable| |Number|Number| Number | Number | | <=field Name
246*
247* The configuration Address is configure as type-I (bits[1:0] = '01') due to
248* PCI spec referring to P2P.
249*
250*********************************************************************/
251void pciOverBridgeWriteConfigReg (PCI_HOST host,
252 unsigned int regOffset,
253 unsigned int pciDevNum,
254 unsigned int busNum, unsigned int data)
255{
256 unsigned int DataForReg;
257 unsigned int functionNum;
258
259 functionNum = regOffset & 0x00000700;
260 pciDevNum = pciDevNum << 11;
261 regOffset = regOffset & 0xff;
262 busNum = busNum << 16;
263 if (pciDevNum == SELF) { /* This board */
264 DataForReg = (regOffset | pciDevNum | functionNum) | BIT0;
265 } else {
266 DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
267 BIT31 | BIT0;
268 }
269 GT_REG_WRITE (pci_configuration_address[host], DataForReg);
270 GT_REG_WRITE (pci_configuration_data[host], data);
271}
272
273
274/********************************************************************
275* pciOverBridgeReadConfigReg - Read from a PCIn configuration register where
276* the agent target locate on another PCI bus.
277* - Make sure the GT is configured as a master
278* before reading from another device on the PCI.
279* - The function takes care of Big/Little endian
280* conversion.
281* INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI
282* spec). (configuration register offset.)
283* pciDevNum: The device number needs to be addressed.
284* busNum: the Bus number where the agent is place.
285* RETURNS: data , if the data == 0xffffffff check the master abort bit in the
286* cause register to make sure the data is valid
287*
288* Configuration Address 0xCF8:
289*
290* 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number
291* |congif|Reserved| Bus |Device|Function|Register|01|
292* |Enable| |Number|Number| Number | Number | | <=field Name
293*
294*********************************************************************/
295unsigned int pciOverBridgeReadConfigReg (PCI_HOST host,
296 unsigned int regOffset,
297 unsigned int pciDevNum,
298 unsigned int busNum)
299{
300 unsigned int DataForReg;
301 unsigned int data;
302 unsigned int functionNum;
303
304 functionNum = regOffset & 0x00000700;
305 pciDevNum = pciDevNum << 11;
306 regOffset = regOffset & 0xff;
307 busNum = busNum << 16;
308 if (pciDevNum == SELF) { /* This board */
309 DataForReg = (regOffset | pciDevNum | functionNum) | BIT31;
310 } else { /* agent on another bus */
311
312 DataForReg = (regOffset | pciDevNum | functionNum | busNum) |
313 BIT0 | BIT31;
314 }
315 GT_REG_WRITE (pci_configuration_address[host], DataForReg);
316 GT_REG_READ (pci_configuration_data[host], &data);
317 return data;
318}
319
320
321/********************************************************************
322* pciGetRegOffset - Gets the register offset for this region config.
323*
324* INPUT: Bus, Region - The bus and region we ask for its base address.
325* OUTPUT: N/A
326* RETURNS: PCI register base address
327*********************************************************************/
328static unsigned int pciGetRegOffset (PCI_HOST host, PCI_REGION region)
329{
330 switch (host) {
331 case PCI_HOST0:
332 switch (region) {
333 case PCI_IO:
334 return PCI_0I_O_LOW_DECODE_ADDRESS;
335 case PCI_REGION0:
336 return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
337 case PCI_REGION1:
338 return PCI_0MEMORY1_LOW_DECODE_ADDRESS;
339 case PCI_REGION2:
340 return PCI_0MEMORY2_LOW_DECODE_ADDRESS;
341 case PCI_REGION3:
342 return PCI_0MEMORY3_LOW_DECODE_ADDRESS;
343 }
344 case PCI_HOST1:
345 switch (region) {
346 case PCI_IO:
347 return PCI_1I_O_LOW_DECODE_ADDRESS;
348 case PCI_REGION0:
349 return PCI_1MEMORY0_LOW_DECODE_ADDRESS;
350 case PCI_REGION1:
351 return PCI_1MEMORY1_LOW_DECODE_ADDRESS;
352 case PCI_REGION2:
353 return PCI_1MEMORY2_LOW_DECODE_ADDRESS;
354 case PCI_REGION3:
355 return PCI_1MEMORY3_LOW_DECODE_ADDRESS;
356 }
357 }
358 return PCI_0MEMORY0_LOW_DECODE_ADDRESS;
359}
360
361static unsigned int pciGetRemapOffset (PCI_HOST host, PCI_REGION region)
362{
363 switch (host) {
364 case PCI_HOST0:
365 switch (region) {
366 case PCI_IO:
367 return PCI_0I_O_ADDRESS_REMAP;
368 case PCI_REGION0:
369 return PCI_0MEMORY0_ADDRESS_REMAP;
370 case PCI_REGION1:
371 return PCI_0MEMORY1_ADDRESS_REMAP;
372 case PCI_REGION2:
373 return PCI_0MEMORY2_ADDRESS_REMAP;
374 case PCI_REGION3:
375 return PCI_0MEMORY3_ADDRESS_REMAP;
376 }
377 case PCI_HOST1:
378 switch (region) {
379 case PCI_IO:
380 return PCI_1I_O_ADDRESS_REMAP;
381 case PCI_REGION0:
382 return PCI_1MEMORY0_ADDRESS_REMAP;
383 case PCI_REGION1:
384 return PCI_1MEMORY1_ADDRESS_REMAP;
385 case PCI_REGION2:
386 return PCI_1MEMORY2_ADDRESS_REMAP;
387 case PCI_REGION3:
388 return PCI_1MEMORY3_ADDRESS_REMAP;
389 }
390 }
391 return PCI_0MEMORY0_ADDRESS_REMAP;
392}
393
394/********************************************************************
395* pciGetBaseAddress - Gets the base address of a PCI.
396* - If the PCI size is 0 then this base address has no meaning!!!
397*
398*
399* INPUT: Bus, Region - The bus and region we ask for its base address.
400* OUTPUT: N/A
401* RETURNS: PCI base address.
402*********************************************************************/
403unsigned int pciGetBaseAddress (PCI_HOST host, PCI_REGION region)
404{
405 unsigned int regBase;
406 unsigned int regEnd;
407 unsigned int regOffset = pciGetRegOffset (host, region);
408
409 GT_REG_READ (regOffset, &regBase);
410 GT_REG_READ (regOffset + 8, &regEnd);
411
412 if (regEnd <= regBase)
413 return 0xffffffff; /* ERROR !!! */
414
415 regBase = regBase << 16;
416 return regBase;
417}
418
419bool pciMapSpace (PCI_HOST host, PCI_REGION region, unsigned int remapBase,
420 unsigned int bankBase, unsigned int bankLength)
421{
422 unsigned int low = 0xfff;
423 unsigned int high = 0x0;
424 unsigned int regOffset = pciGetRegOffset (host, region);
425 unsigned int remapOffset = pciGetRemapOffset (host, region);
426
427 if (bankLength != 0) {
428 low = (bankBase >> 16) & 0xffff;
429 high = ((bankBase + bankLength) >> 16) - 1;
430 }
431
432 GT_REG_WRITE (regOffset, low | (1 << 24)); /* no swapping */
433 GT_REG_WRITE (regOffset + 8, high);
434
435 if (bankLength != 0) { /* must do AFTER writing maps */
436 GT_REG_WRITE (remapOffset, remapBase >> 16); /* sorry, 32 bits only.
437 dont support upper 32
438 in this driver */
439 }
440 return true;
441}
442
443unsigned int pciGetSpaceBase (PCI_HOST host, PCI_REGION region)
444{
445 unsigned int low;
446 unsigned int regOffset = pciGetRegOffset (host, region);
447
448 GT_REG_READ (regOffset, &low);
449 return (low & 0xffff) << 16;
450}
451
452unsigned int pciGetSpaceSize (PCI_HOST host, PCI_REGION region)
453{
454 unsigned int low, high;
455 unsigned int regOffset = pciGetRegOffset (host, region);
456
457 GT_REG_READ (regOffset, &low);
458 GT_REG_READ (regOffset + 8, &high);
459 return ((high & 0xffff) + 1) << 16;
460}
461
462
463/* ronen - 7/Dec/03*/
464/********************************************************************
465* gtPciDisable/EnableInternalBAR - This function enable/disable PCI BARS.
466* Inputs: one of the PCI BAR
467*********************************************************************/
468void gtPciEnableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
469{
470 RESET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
471}
472
473void gtPciDisableInternalBAR (PCI_HOST host, PCI_INTERNAL_BAR pciBAR)
474{
475 SET_REG_BITS (pci_address_space_en[host], BIT0 << pciBAR);
476}
477
478/********************************************************************
479* pciMapMemoryBank - Maps PCI_host memory bank "bank" for the slave.
480*
481* Inputs: base and size of PCI SCS
482*********************************************************************/
483void pciMapMemoryBank (PCI_HOST host, MEMORY_BANK bank,
484 unsigned int pciDramBase, unsigned int pciDramSize)
485{
486 /*ronen different function for 3rd bank. */
487 unsigned int offset = (bank < 2) ? bank * 8 : 0x100 + (bank - 2) * 8;
488
489 pciDramBase = pciDramBase & 0xfffff000;
490 pciDramBase = pciDramBase | (pciReadConfigReg (host,
491 PCI_SCS_0_BASE_ADDRESS
492 + offset,
493 SELF) & 0x00000fff);
494 pciWriteConfigReg (host, PCI_SCS_0_BASE_ADDRESS + offset, SELF,
495 pciDramBase);
496 if (pciDramSize == 0)
497 pciDramSize++;
498 GT_REG_WRITE (pci_scs_bank_size[host][bank], pciDramSize - 1);
499 gtPciEnableInternalBAR (host, bank);
500}
501
502/********************************************************************
503* pciSetRegionFeatures - This function modifys one of the 8 regions with
504* feature bits given as an input.
505* - Be advised to check the spec before modifying them.
506* Inputs: PCI_PROTECT_REGION region - one of the eight regions.
507* unsigned int features - See file: pci.h there are defintion for those
508* region features.
509* unsigned int baseAddress - The region base Address.
510* unsigned int topAddress - The region top Address.
511* Returns: false if one of the parameters is erroneous true otherwise.
512*********************************************************************/
513bool pciSetRegionFeatures (PCI_HOST host, PCI_ACCESS_REGIONS region,
514 unsigned int features, unsigned int baseAddress,
515 unsigned int regionLength)
516{
517 unsigned int accessLow;
518 unsigned int accessHigh;
519 unsigned int accessTop = baseAddress + regionLength;
520
521 if (regionLength == 0) { /* close the region. */
522 pciDisableAccessRegion (host, region);
523 return true;
524 }
525 /* base Address is store is bits [11:0] */
526 accessLow = (baseAddress & 0xfff00000) >> 20;
527 /* All the features are update according to the defines in pci.h (to be on
528 the safe side we disable bits: [11:0] */
529 accessLow = accessLow | (features & 0xfffff000);
530 /* write to the Low Access Region register */
531 GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
532 accessLow);
533
534 accessHigh = (accessTop & 0xfff00000) >> 20;
535
536 /* write to the High Access Region register */
537 GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region,
538 accessHigh - 1);
539 return true;
540}
541
542/********************************************************************
543* pciDisableAccessRegion - Disable The given Region by writing MAX size
544* to its low Address and MIN size to its high Address.
545*
546* Inputs: PCI_ACCESS_REGIONS region - The region we to be Disabled.
547* Returns: N/A.
548*********************************************************************/
549void pciDisableAccessRegion (PCI_HOST host, PCI_ACCESS_REGIONS region)
550{
551 /* writing back the registers default values. */
552 GT_REG_WRITE (pci_access_control_base_0_low[host] + 0x10 * region,
553 0x01001fff);
554 GT_REG_WRITE (pci_access_control_top_0[host] + 0x10 * region, 0);
555}
556
557/********************************************************************
558* pciArbiterEnable - Enables PCI-0`s Arbitration mechanism.
559*
560* Inputs: N/A
561* Returns: true.
562*********************************************************************/
563bool pciArbiterEnable (PCI_HOST host)
564{
565 unsigned int regData;
566
567 GT_REG_READ (pci_arbiter_control[host], &regData);
568 GT_REG_WRITE (pci_arbiter_control[host], regData | BIT31);
569 return true;
570}
571
572/********************************************************************
573* pciArbiterDisable - Disable PCI-0`s Arbitration mechanism.
574*
575* Inputs: N/A
576* Returns: true
577*********************************************************************/
578bool pciArbiterDisable (PCI_HOST host)
579{
580 unsigned int regData;
581
582 GT_REG_READ (pci_arbiter_control[host], &regData);
583 GT_REG_WRITE (pci_arbiter_control[host], regData & 0x7fffffff);
584 return true;
585}
586
587/********************************************************************
588* pciSetArbiterAgentsPriority - Priority setup for the PCI agents (Hi or Low)
589*
590* Inputs: PCI_AGENT_PRIO internalAgent - priotity for internal agent.
591* PCI_AGENT_PRIO externalAgent0 - priotity for external#0 agent.
592* PCI_AGENT_PRIO externalAgent1 - priotity for external#1 agent.
593* PCI_AGENT_PRIO externalAgent2 - priotity for external#2 agent.
594* PCI_AGENT_PRIO externalAgent3 - priotity for external#3 agent.
595* PCI_AGENT_PRIO externalAgent4 - priotity for external#4 agent.
596* PCI_AGENT_PRIO externalAgent5 - priotity for external#5 agent.
597* Returns: true
598*********************************************************************/
599bool pciSetArbiterAgentsPriority (PCI_HOST host, PCI_AGENT_PRIO internalAgent,
600 PCI_AGENT_PRIO externalAgent0,
601 PCI_AGENT_PRIO externalAgent1,
602 PCI_AGENT_PRIO externalAgent2,
603 PCI_AGENT_PRIO externalAgent3,
604 PCI_AGENT_PRIO externalAgent4,
605 PCI_AGENT_PRIO externalAgent5)
606{
607 unsigned int regData;
608 unsigned int writeData;
609
610 GT_REG_READ (pci_arbiter_control[host], &regData);
611 writeData = (internalAgent << 7) + (externalAgent0 << 8) +
612 (externalAgent1 << 9) + (externalAgent2 << 10) +
613 (externalAgent3 << 11) + (externalAgent4 << 12) +
614 (externalAgent5 << 13);
615 regData = (regData & 0xffffc07f) | writeData;
616 GT_REG_WRITE (pci_arbiter_control[host], regData & regData);
617 return true;
618}
619
620/********************************************************************
621* pciParkingDisable - Park on last option disable, with this function you can
622* disable the park on last mechanism for each agent.
623* disabling this option for all agents results parking
624* on the internal master.
625*
626* Inputs: PCI_AGENT_PARK internalAgent - parking Disable for internal agent.
627* PCI_AGENT_PARK externalAgent0 - parking Disable for external#0 agent.
628* PCI_AGENT_PARK externalAgent1 - parking Disable for external#1 agent.
629* PCI_AGENT_PARK externalAgent2 - parking Disable for external#2 agent.
630* PCI_AGENT_PARK externalAgent3 - parking Disable for external#3 agent.
631* PCI_AGENT_PARK externalAgent4 - parking Disable for external#4 agent.
632* PCI_AGENT_PARK externalAgent5 - parking Disable for external#5 agent.
633* Returns: true
634*********************************************************************/
635bool pciParkingDisable (PCI_HOST host, PCI_AGENT_PARK internalAgent,
636 PCI_AGENT_PARK externalAgent0,
637 PCI_AGENT_PARK externalAgent1,
638 PCI_AGENT_PARK externalAgent2,
639 PCI_AGENT_PARK externalAgent3,
640 PCI_AGENT_PARK externalAgent4,
641 PCI_AGENT_PARK externalAgent5)
642{
643 unsigned int regData;
644 unsigned int writeData;
645
646 GT_REG_READ (pci_arbiter_control[host], &regData);
647 writeData = (internalAgent << 14) + (externalAgent0 << 15) +
648 (externalAgent1 << 16) + (externalAgent2 << 17) +
649 (externalAgent3 << 18) + (externalAgent4 << 19) +
650 (externalAgent5 << 20);
651 regData = (regData & ~(0x7f << 14)) | writeData;
652 GT_REG_WRITE (pci_arbiter_control[host], regData);
653 return true;
654}
655
656/********************************************************************
657* pciEnableBrokenAgentDetection - A master is said to be broken if it fails to
658* respond to grant assertion within a window specified in
659* the input value: 'brokenValue'.
660*
661* Inputs: unsigned char brokenValue - A value which limits the Master to hold the
662* grant without asserting frame.
663* Returns: Error for illegal broken value otherwise true.
664*********************************************************************/
665bool pciEnableBrokenAgentDetection (PCI_HOST host, unsigned char brokenValue)
666{
667 unsigned int data;
668 unsigned int regData;
669
670 if (brokenValue > 0xf)
671 return false; /* brokenValue must be 4 bit */
672 data = brokenValue << 3;
673 GT_REG_READ (pci_arbiter_control[host], &regData);
674 regData = (regData & 0xffffff87) | data;
675 GT_REG_WRITE (pci_arbiter_control[host], regData | BIT1);
676 return true;
677}
678
679/********************************************************************
680* pciDisableBrokenAgentDetection - This function disable the Broken agent
681* Detection mechanism.
682* NOTE: This operation may cause a dead lock on the
683* pci0 arbitration.
684*
685* Inputs: N/A
686* Returns: true.
687*********************************************************************/
688bool pciDisableBrokenAgentDetection (PCI_HOST host)
689{
690 unsigned int regData;
691
692 GT_REG_READ (pci_arbiter_control[host], &regData);
693 regData = regData & 0xfffffffd;
694 GT_REG_WRITE (pci_arbiter_control[host], regData);
695 return true;
696}
697
698/********************************************************************
699* pciP2PConfig - This function set the PCI_n P2P configurate.
700* For more information on the P2P read PCI spec.
701*
702* Inputs: unsigned int SecondBusLow - Secondery PCI interface Bus Range Lower
703* Boundry.
704* unsigned int SecondBusHigh - Secondry PCI interface Bus Range upper
705* Boundry.
706* unsigned int busNum - The CPI bus number to which the PCI interface
707* is connected.
708* unsigned int devNum - The PCI interface's device number.
709*
710* Returns: true.
711*********************************************************************/
712bool pciP2PConfig (PCI_HOST host, unsigned int SecondBusLow,
713 unsigned int SecondBusHigh,
714 unsigned int busNum, unsigned int devNum)
715{
716 unsigned int regData;
717
718 regData = (SecondBusLow & 0xff) | ((SecondBusHigh & 0xff) << 8) |
719 ((busNum & 0xff) << 16) | ((devNum & 0x1f) << 24);
720 GT_REG_WRITE (pci_p2p_configuration[host], regData);
721 return true;
722}
723
724/********************************************************************
725* pciSetRegionSnoopMode - This function modifys one of the 4 regions which
726* supports Cache Coherency in the PCI_n interface.
727* Inputs: region - One of the four regions.
728* snoopType - There is four optional Types:
729* 1. No Snoop.
730* 2. Snoop to WT region.
731* 3. Snoop to WB region.
732* 4. Snoop & Invalidate to WB region.
733* baseAddress - Base Address of this region.
734* regionLength - Region length.
735* Returns: false if one of the parameters is wrong otherwise return true.
736*********************************************************************/
737bool pciSetRegionSnoopMode (PCI_HOST host, PCI_SNOOP_REGION region,
738 PCI_SNOOP_TYPE snoopType,
739 unsigned int baseAddress,
740 unsigned int regionLength)
741{
742 unsigned int snoopXbaseAddress;
743 unsigned int snoopXtopAddress;
744 unsigned int data;
745 unsigned int snoopHigh = baseAddress + regionLength;
746
747 if ((region > PCI_SNOOP_REGION3) || (snoopType > PCI_SNOOP_WB))
748 return false;
749 snoopXbaseAddress =
750 pci_snoop_control_base_0_low[host] + 0x10 * region;
751 snoopXtopAddress = pci_snoop_control_top_0[host] + 0x10 * region;
752 if (regionLength == 0) { /* closing the region */
753 GT_REG_WRITE (snoopXbaseAddress, 0x0000ffff);
754 GT_REG_WRITE (snoopXtopAddress, 0);
755 return true;
756 }
757 baseAddress = baseAddress & 0xfff00000; /* Granularity of 1MByte */
758 data = (baseAddress >> 20) | snoopType << 12;
759 GT_REG_WRITE (snoopXbaseAddress, data);
760 snoopHigh = (snoopHigh & 0xfff00000) >> 20;
761 GT_REG_WRITE (snoopXtopAddress, snoopHigh - 1);
762 return true;
763}
764
765static int gt_read_config_dword (struct pci_controller *hose,
766 pci_dev_t dev, int offset, u32 * value)
767{
768 int bus = PCI_BUS (dev);
769
770 if ((bus == local_buses[0]) || (bus == local_buses[1])) {
771 *value = pciReadConfigReg ((PCI_HOST) hose->cfg_addr, offset,
772 PCI_DEV (dev));
773 } else {
774 *value = pciOverBridgeReadConfigReg ((PCI_HOST) hose->
775 cfg_addr, offset,
776 PCI_DEV (dev), bus);
777 }
778
779 return 0;
780}
781
782static int gt_write_config_dword (struct pci_controller *hose,
783 pci_dev_t dev, int offset, u32 value)
784{
785 int bus = PCI_BUS (dev);
786
787 if ((bus == local_buses[0]) || (bus == local_buses[1])) {
788 pciWriteConfigReg ((PCI_HOST) hose->cfg_addr, offset,
789 PCI_DEV (dev), value);
790 } else {
791 pciOverBridgeWriteConfigReg ((PCI_HOST) hose->cfg_addr,
792 offset, PCI_DEV (dev), bus,
793 value);
794 }
795 return 0;
796}
797
798
799static void gt_setup_ide (struct pci_controller *hose,
800 pci_dev_t dev, struct pci_config_table *entry)
801{
802 static const int ide_bar[] = { 8, 4, 8, 4, 0, 0 };
803 u32 bar_response, bar_value;
804 int bar;
805
806 for (bar = 0; bar < 6; bar++) {
807 /*ronen different function for 3rd bank. */
808 unsigned int offset =
809 (bar < 2) ? bar * 8 : 0x100 + (bar - 2) * 8;
810
811 pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
812 0x0);
813 pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + offset,
814 &bar_response);
815
816 pciauto_region_allocate (bar_response &
817 PCI_BASE_ADDRESS_SPACE_IO ? hose->
818 pci_io : hose->pci_mem, ide_bar[bar],
819 &bar_value);
820
821 pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0 + bar * 4,
822 bar_value);
823 }
824}
825
826#ifdef CONFIG_USE_CPCIDVI
827static void gt_setup_cpcidvi (struct pci_controller *hose,
828 pci_dev_t dev, struct pci_config_table *entry)
829{
830 u32 bar_value, pci_response;
831
832 pci_hose_read_config_dword (hose, dev, PCI_COMMAND, &pci_response);
833 pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, 0xffffffff);
834 pci_hose_read_config_dword (hose, dev, PCI_BASE_ADDRESS_0, &pci_response);
835 pciauto_region_allocate (hose->pci_mem, 0x01000000, &bar_value);
836 pci_hose_write_config_dword (hose, dev, PCI_BASE_ADDRESS_0, (bar_value & 0xffffff00));
837 pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, 0x0);
838 pciauto_region_allocate (hose->pci_mem, 0x40000, &bar_value);
839 pci_hose_write_config_dword (hose, dev, PCI_ROM_ADDRESS, (bar_value & 0xffffff00) | 0x01);
840 gt_cpcidvi_rom.base = bar_value & 0xffffff00;
841 gt_cpcidvi_rom.init = 1;
842}
843
844unsigned char gt_cpcidvi_in8(unsigned int offset)
845{
846 unsigned char data;
847
848 if (gt_cpcidvi_rom.init == 0) {
849 return(0);
850 }
851 data = in8((offset & 0x04) + 0x3f000 + gt_cpcidvi_rom.base);
852 return(data);
853}
854
855void gt_cpcidvi_out8(unsigned int offset, unsigned char data)
856{
857 unsigned int off;
858
859 if (gt_cpcidvi_rom.init == 0) {
860 return;
861 }
862 off = data;
863 off = ((off << 3) & 0x7f8) + (offset & 0x4) + 0x3e000 + gt_cpcidvi_rom.base;
864 in8(off);
865 return;
866}
867#endif
868
869/* TODO BJW: Change this for DB64360. This was pulled from the EV64260 */
870/* and is curently not called *. */
871#if 0
872static void gt_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
873{
874 unsigned char pin, irq;
875
876 pci_read_config_byte (dev, PCI_INTERRUPT_PIN, &pin);
877
878 if (pin == 1) { /* only allow INT A */
879 irq = pci_irq_swizzle[(PCI_HOST) hose->
880 cfg_addr][PCI_DEV (dev)];
881 if (irq)
882 pci_write_config_byte (dev, PCI_INTERRUPT_LINE, irq);
883 }
884}
885#endif
886
887struct pci_config_table gt_config_table[] = {
888#ifdef CONFIG_USE_CPCIDVI
889 {PCI_VENDOR_ID_CT, PCI_DEVICE_ID_CT_69030, PCI_CLASS_DISPLAY_VGA,
890 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_cpcidvi},
891#endif
892 {PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE,
893 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, gt_setup_ide},
894 {}
895};
896
897struct pci_controller pci0_hose = {
898/* fixup_irq: gt_fixup_irq, */
899 config_table:gt_config_table,
900};
901
902struct pci_controller pci1_hose = {
903/* fixup_irq: gt_fixup_irq, */
904 config_table:gt_config_table,
905};
906
907void pci_init_board (void)
908{
909 unsigned int command;
910#ifdef CONFIG_PCI_PNP
911 unsigned int bar;
912#endif
913#ifdef DEBUG
914 gt_pci_bus_mode_display (PCI_HOST0);
915#endif
916#ifdef CONFIG_USE_CPCIDVI
917 gt_cpcidvi_rom.init = 0;
918 gt_cpcidvi_rom.base = 0;
919#endif
920
921 pci0_hose.config_table = gt_config_table;
922 pci1_hose.config_table = gt_config_table;
923
924#ifdef CONFIG_USE_CPCIDVI
925 gt_config_table[0].config_device = gt_setup_cpcidvi;
926#endif
927 gt_config_table[1].config_device = gt_setup_ide;
928
929 pci0_hose.first_busno = 0;
930 pci0_hose.last_busno = 0xff;
931 local_buses[0] = pci0_hose.first_busno;
932
933 /* PCI memory space */
934 pci_set_region (pci0_hose.regions + 0,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200935 CONFIG_SYS_PCI0_0_MEM_SPACE,
936 CONFIG_SYS_PCI0_0_MEM_SPACE,
937 CONFIG_SYS_PCI0_MEM_SIZE, PCI_REGION_MEM);
Stefan Roese1eac2a72006-11-29 15:42:37 +0100938
939 /* PCI I/O space */
940 pci_set_region (pci0_hose.regions + 1,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200941 CONFIG_SYS_PCI0_IO_SPACE_PCI,
942 CONFIG_SYS_PCI0_IO_SPACE, CONFIG_SYS_PCI0_IO_SIZE, PCI_REGION_IO);
Stefan Roese1eac2a72006-11-29 15:42:37 +0100943
944 pci_set_ops (&pci0_hose,
945 pci_hose_read_config_byte_via_dword,
946 pci_hose_read_config_word_via_dword,
947 gt_read_config_dword,
948 pci_hose_write_config_byte_via_dword,
949 pci_hose_write_config_word_via_dword,
950 gt_write_config_dword);
951 pci0_hose.region_count = 2;
952
953 pci0_hose.cfg_addr = (unsigned int *) PCI_HOST0;
954
955 pci_register_hose (&pci0_hose);
956 pciArbiterDisable(PCI_HOST0); /* on PMC modules no arbiter is used */
957 pciParkingDisable (PCI_HOST0, 1, 1, 1, 1, 1, 1, 1);
958 command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
959 command |= PCI_COMMAND_MASTER;
960 pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
961 command = pciReadConfigReg (PCI_HOST0, PCI_COMMAND, SELF);
962 command |= PCI_COMMAND_MEMORY;
963 pciWriteConfigReg (PCI_HOST0, PCI_COMMAND, SELF, command);
964
965#ifdef CONFIG_PCI_PNP
966 pciauto_config_init(&pci0_hose);
967 pciauto_region_allocate(pci0_hose.pci_io, 0x400, &bar);
968#endif
969#ifdef CONFIG_PCI_SCAN_SHOW
970 printf("PCI: Bus Dev VenId DevId Class Int\n");
971#endif
972 pci0_hose.last_busno = pci_hose_scan_bus (&pci0_hose, pci0_hose.first_busno);
973
974#ifdef DEBUG
975 gt_pci_bus_mode_display (PCI_HOST1);
976#endif
977 pci1_hose.first_busno = pci0_hose.last_busno + 1;
978 pci1_hose.last_busno = 0xff;
979 pci1_hose.current_busno = pci1_hose.first_busno;
980 local_buses[1] = pci1_hose.first_busno;
981
982 /* PCI memory space */
983 pci_set_region (pci1_hose.regions + 0,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200984 CONFIG_SYS_PCI1_0_MEM_SPACE,
985 CONFIG_SYS_PCI1_0_MEM_SPACE,
986 CONFIG_SYS_PCI1_MEM_SIZE, PCI_REGION_MEM);
Stefan Roese1eac2a72006-11-29 15:42:37 +0100987
988 /* PCI I/O space */
989 pci_set_region (pci1_hose.regions + 1,
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200990 CONFIG_SYS_PCI1_IO_SPACE_PCI,
991 CONFIG_SYS_PCI1_IO_SPACE, CONFIG_SYS_PCI1_IO_SIZE, PCI_REGION_IO);
Stefan Roese1eac2a72006-11-29 15:42:37 +0100992
993 pci_set_ops (&pci1_hose,
994 pci_hose_read_config_byte_via_dword,
995 pci_hose_read_config_word_via_dword,
996 gt_read_config_dword,
997 pci_hose_write_config_byte_via_dword,
998 pci_hose_write_config_word_via_dword,
999 gt_write_config_dword);
1000
1001 pci1_hose.region_count = 2;
1002
1003 pci1_hose.cfg_addr = (unsigned int *) PCI_HOST1;
1004
1005 pci_register_hose (&pci1_hose);
1006
1007 pciArbiterEnable (PCI_HOST1);
1008 pciParkingDisable (PCI_HOST1, 1, 1, 1, 1, 1, 1, 1);
1009
1010 command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
1011 command |= PCI_COMMAND_MASTER;
1012 pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
1013
1014#ifdef CONFIG_PCI_PNP
1015 pciauto_config_init(&pci1_hose);
1016 pciauto_region_allocate(pci1_hose.pci_io, 0x400, &bar);
1017#endif
1018 pci1_hose.last_busno = pci_hose_scan_bus (&pci1_hose, pci1_hose.first_busno);
1019
1020 command = pciReadConfigReg (PCI_HOST1, PCI_COMMAND, SELF);
1021 command |= PCI_COMMAND_MEMORY;
1022 pciWriteConfigReg (PCI_HOST1, PCI_COMMAND, SELF, command);
1023
1024}
1025#endif /* of CONFIG_PCI */