blob: 1b945e9727acf7d34546be35a8a21ccd845dd838 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001// SPDX-License-Identifier: GPL-2.0+
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +00002/*
3 * (C) Copyright 2013 ADVANSEE
4 * Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
5 *
6 * Based on Dirk Behme's
7 * https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c,
8 * which is based on Freescale's
9 * http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6,
10 * which is:
11 * Copyright (C) 2011 Freescale Semiconductor, Inc.
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000012 */
13
14#include <common.h>
15#include <fuse.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090016#include <linux/errno.h>
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000017#include <asm/io.h>
18#include <asm/arch/clock.h>
19#include <asm/arch/imx-regs.h>
Stefano Babic552a8482017-06-29 10:16:06 +020020#include <asm/mach-imx/sys_proto.h>
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000021
22#define BO_CTRL_WR_UNLOCK 16
23#define BM_CTRL_WR_UNLOCK 0xffff0000
24#define BV_CTRL_WR_UNLOCK_KEY 0x3e77
25#define BM_CTRL_ERROR 0x00000200
26#define BM_CTRL_BUSY 0x00000100
27#define BO_CTRL_ADDR 0
Adrian Alonso42c91c12015-08-11 11:19:52 -050028#ifdef CONFIG_MX7
29#define BM_CTRL_ADDR 0x0000000f
30#define BM_CTRL_RELOAD 0x00000400
Peng Fan3ca0f0d2017-02-22 16:21:46 +080031#elif defined(CONFIG_MX7ULP)
32#define BM_CTRL_ADDR 0x000000FF
33#define BM_CTRL_RELOAD 0x00000400
34#define BM_OUT_STATUS_DED 0x00000400
35#define BM_OUT_STATUS_LOCKED 0x00000800
36#define BM_OUT_STATUS_PROGFAIL 0x00001000
Peng Fancd357ad2018-11-20 10:19:25 +000037#elif defined(CONFIG_IMX8M)
Peng Fan8a099b62018-01-10 13:20:39 +080038#define BM_CTRL_ADDR 0x000000ff
Adrian Alonso42c91c12015-08-11 11:19:52 -050039#else
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000040#define BM_CTRL_ADDR 0x0000007f
Adrian Alonso42c91c12015-08-11 11:19:52 -050041#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000042
Adrian Alonso42c91c12015-08-11 11:19:52 -050043#ifdef CONFIG_MX7
44#define BO_TIMING_FSOURCE 12
45#define BM_TIMING_FSOURCE 0x0007f000
46#define BV_TIMING_FSOURCE_NS 1001
47#define BO_TIMING_PROG 0
48#define BM_TIMING_PROG 0x00000fff
49#define BV_TIMING_PROG_US 10
50#else
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000051#define BO_TIMING_STROBE_READ 16
52#define BM_TIMING_STROBE_READ 0x003f0000
53#define BV_TIMING_STROBE_READ_NS 37
54#define BO_TIMING_RELAX 12
55#define BM_TIMING_RELAX 0x0000f000
56#define BV_TIMING_RELAX_NS 17
57#define BO_TIMING_STROBE_PROG 0
58#define BM_TIMING_STROBE_PROG 0x00000fff
59#define BV_TIMING_STROBE_PROG_US 10
Adrian Alonso42c91c12015-08-11 11:19:52 -050060#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +000061
62#define BM_READ_CTRL_READ_FUSE 0x00000001
63
64#define BF(value, field) (((value) << BO_##field) & BM_##field)
65
66#define WRITE_POSTAMBLE_US 2
67
Peng Fan7296a022015-08-26 15:40:47 +080068#if defined(CONFIG_MX6) || defined(CONFIG_VF610)
69#define FUSE_BANK_SIZE 0x80
70#ifdef CONFIG_MX6SL
71#define FUSE_BANKS 8
Peng Fanb2ebdd82016-12-11 19:24:33 +080072#elif defined(CONFIG_MX6ULL) || defined(CONFIG_MX6SLL)
Peng Fanf8b95732016-08-11 14:02:41 +080073#define FUSE_BANKS 9
Peng Fan7296a022015-08-26 15:40:47 +080074#else
75#define FUSE_BANKS 16
76#endif
77#elif defined CONFIG_MX7
78#define FUSE_BANK_SIZE 0x40
79#define FUSE_BANKS 16
Peng Fan3ca0f0d2017-02-22 16:21:46 +080080#elif defined(CONFIG_MX7ULP)
81#define FUSE_BANK_SIZE 0x80
82#define FUSE_BANKS 31
Peng Fancd357ad2018-11-20 10:19:25 +000083#elif defined(CONFIG_IMX8M)
Peng Fan8a099b62018-01-10 13:20:39 +080084#define FUSE_BANK_SIZE 0x40
85#define FUSE_BANKS 64
Peng Fan7296a022015-08-26 15:40:47 +080086#else
87#error "Unsupported architecture\n"
88#endif
89
90#if defined(CONFIG_MX6)
Peng Fan7296a022015-08-26 15:40:47 +080091
92/*
93 * There is a hole in shadow registers address map of size 0x100
Peng Fanf8b95732016-08-11 14:02:41 +080094 * between bank 5 and bank 6 on iMX6QP, iMX6DQ, iMX6SDL, iMX6SX,
Peng Fanb2ebdd82016-12-11 19:24:33 +080095 * iMX6UL, i.MX6ULL and i.MX6SLL.
Peng Fan7296a022015-08-26 15:40:47 +080096 * Bank 5 ends at 0x6F0 and Bank 6 starts at 0x800. When reading the fuses,
97 * we should account for this hole in address space.
98 *
99 * Similar hole exists between bank 14 and bank 15 of size
100 * 0x80 on iMX6QP, iMX6DQ, iMX6SDL and iMX6SX.
101 * Note: iMX6SL has only 0-7 banks and there is no hole.
102 * Note: iMX6UL doesn't have this one.
103 *
104 * This function is to covert user input to physical bank index.
105 * Only needed when read fuse, because we use register offset, so
106 * need to calculate real register offset.
107 * When write, no need to consider hole, always use the bank/word
108 * index from fuse map.
109 */
110u32 fuse_bank_physical(int index)
111{
112 u32 phy_index;
113
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800114 if (is_mx6sl() || is_mx7ulp()) {
Peng Fan7296a022015-08-26 15:40:47 +0800115 phy_index = index;
Peng Fanb2ebdd82016-12-11 19:24:33 +0800116 } else if (is_mx6ul() || is_mx6ull() || is_mx6sll()) {
117 if ((is_mx6ull() || is_mx6sll()) && index == 8)
Peng Fanf8b95732016-08-11 14:02:41 +0800118 index = 7;
119
Peng Fan7296a022015-08-26 15:40:47 +0800120 if (index >= 6)
121 phy_index = fuse_bank_physical(5) + (index - 6) + 3;
122 else
123 phy_index = index;
124 } else {
125 if (index >= 15)
126 phy_index = fuse_bank_physical(14) + (index - 15) + 2;
127 else if (index >= 6)
128 phy_index = fuse_bank_physical(5) + (index - 6) + 3;
129 else
130 phy_index = index;
131 }
132 return phy_index;
133}
Peng Fanf8b95732016-08-11 14:02:41 +0800134
135u32 fuse_word_physical(u32 bank, u32 word_index)
136{
Peng Fanb2ebdd82016-12-11 19:24:33 +0800137 if (is_mx6ull() || is_mx6sll()) {
Peng Fanf8b95732016-08-11 14:02:41 +0800138 if (bank == 8)
139 word_index = word_index + 4;
140 }
141
142 return word_index;
143}
Peng Fan7296a022015-08-26 15:40:47 +0800144#else
145u32 fuse_bank_physical(int index)
146{
147 return index;
148}
Peng Fanf8b95732016-08-11 14:02:41 +0800149
150u32 fuse_word_physical(u32 bank, u32 word_index)
151{
152 return word_index;
153}
154
Peng Fan7296a022015-08-26 15:40:47 +0800155#endif
156
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000157static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us)
158{
159 while (readl(&regs->ctrl) & BM_CTRL_BUSY)
160 udelay(delay_us);
161}
162
163static void clear_error(struct ocotp_regs *regs)
164{
165 writel(BM_CTRL_ERROR, &regs->ctrl_clr);
166}
167
168static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word,
169 int assert, const char *caller)
170{
171 *regs = (struct ocotp_regs *)OCOTP_BASE_ADDR;
172
Peng Fan7296a022015-08-26 15:40:47 +0800173 if (bank >= FUSE_BANKS ||
174 word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
175 !assert) {
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000176 printf("mxc_ocotp %s(): Invalid argument\n", caller);
177 return -EINVAL;
178 }
179
Peng Fanb2ebdd82016-12-11 19:24:33 +0800180 if (is_mx6ull() || is_mx6sll()) {
Peng Fanf8b95732016-08-11 14:02:41 +0800181 if ((bank == 7 || bank == 8) &&
182 word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 3) {
Peng Fanb2ebdd82016-12-11 19:24:33 +0800183 printf("mxc_ocotp %s(): Invalid argument\n", caller);
Peng Fanf8b95732016-08-11 14:02:41 +0800184 return -EINVAL;
185 }
186 }
187
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000188 enable_ocotp_clk(1);
189
190 wait_busy(*regs, 1);
191 clear_error(*regs);
192
193 return 0;
194}
195
196static int finish_access(struct ocotp_regs *regs, const char *caller)
197{
198 u32 err;
199
200 err = !!(readl(&regs->ctrl) & BM_CTRL_ERROR);
201 clear_error(regs);
202
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800203#ifdef CONFIG_MX7ULP
204 /* Need to power down the OTP memory */
205 writel(1, &regs->pdn);
206#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000207 if (err) {
208 printf("mxc_ocotp %s(): Access protect error\n", caller);
209 return -EIO;
210 }
211
212 return 0;
213}
214
215static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val,
216 const char *caller)
217{
218 return prepare_access(regs, bank, word, val != NULL, caller);
219}
220
221int fuse_read(u32 bank, u32 word, u32 *val)
222{
223 struct ocotp_regs *regs;
224 int ret;
Peng Fan7296a022015-08-26 15:40:47 +0800225 u32 phy_bank;
Peng Fanf8b95732016-08-11 14:02:41 +0800226 u32 phy_word;
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000227
228 ret = prepare_read(&regs, bank, word, val, __func__);
229 if (ret)
230 return ret;
231
Peng Fan7296a022015-08-26 15:40:47 +0800232 phy_bank = fuse_bank_physical(bank);
Peng Fanf8b95732016-08-11 14:02:41 +0800233 phy_word = fuse_word_physical(bank, word);
Peng Fan7296a022015-08-26 15:40:47 +0800234
Peng Fanf8b95732016-08-11 14:02:41 +0800235 *val = readl(&regs->bank[phy_bank].fuse_regs[phy_word << 2]);
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000236
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800237#ifdef CONFIG_MX7ULP
238 if (readl(&regs->out_status) & BM_OUT_STATUS_DED) {
239 writel(BM_OUT_STATUS_DED, &regs->out_status_clr);
240 printf("mxc_ocotp %s(): fuse read wrong\n", __func__);
241 return -EIO;
242 }
243#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000244 return finish_access(regs, __func__);
245}
246
Adrian Alonso42c91c12015-08-11 11:19:52 -0500247#ifdef CONFIG_MX7
248static void set_timing(struct ocotp_regs *regs)
249{
250 u32 ipg_clk;
251 u32 fsource, prog;
252 u32 timing;
253
254 ipg_clk = mxc_get_clock(MXC_IPG_CLK);
255
256 fsource = DIV_ROUND_UP((ipg_clk / 1000) * BV_TIMING_FSOURCE_NS,
257 + 1000000) + 1;
258 prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_PROG_US, 1000000) + 1;
259
260 timing = BF(fsource, TIMING_FSOURCE) | BF(prog, TIMING_PROG);
261
262 clrsetbits_le32(&regs->timing, BM_TIMING_FSOURCE | BM_TIMING_PROG,
263 timing);
264}
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800265#elif defined(CONFIG_MX7ULP)
266static void set_timing(struct ocotp_regs *regs)
267{
268 /* No timing set for MX7ULP */
269}
270
Adrian Alonso42c91c12015-08-11 11:19:52 -0500271#else
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000272static void set_timing(struct ocotp_regs *regs)
273{
274 u32 ipg_clk;
275 u32 relax, strobe_read, strobe_prog;
276 u32 timing;
277
278 ipg_clk = mxc_get_clock(MXC_IPG_CLK);
279
280 relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
281 strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
282 1000000000) + 2 * (relax + 1) - 1;
Masahiro Yamada45159922014-11-07 03:03:26 +0900283 strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US,
284 1000000) + 2 * (relax + 1) - 1;
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000285
286 timing = BF(strobe_read, TIMING_STROBE_READ) |
287 BF(relax, TIMING_RELAX) |
288 BF(strobe_prog, TIMING_STROBE_PROG);
289
290 clrsetbits_le32(&regs->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX |
291 BM_TIMING_STROBE_PROG, timing);
292}
Adrian Alonso42c91c12015-08-11 11:19:52 -0500293#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000294
295static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word,
296 int write)
297{
298 u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
Adrian Alonso42c91c12015-08-11 11:19:52 -0500299#ifdef CONFIG_MX7
300 u32 addr = bank;
Peng Fancd357ad2018-11-20 10:19:25 +0000301#elif defined CONFIG_IMX8M
Peng Fan8a099b62018-01-10 13:20:39 +0800302 u32 addr = bank << 2 | word;
Adrian Alonso42c91c12015-08-11 11:19:52 -0500303#else
Peng Fanf8b95732016-08-11 14:02:41 +0800304 u32 addr;
305 /* Bank 7 and Bank 8 only supports 4 words each for i.MX6ULL */
Peng Fanb2ebdd82016-12-11 19:24:33 +0800306 if ((is_mx6ull() || is_mx6sll()) && (bank > 7)) {
Peng Fanf8b95732016-08-11 14:02:41 +0800307 bank = bank - 1;
308 word += 4;
309 }
310 addr = bank << 3 | word;
Adrian Alonso42c91c12015-08-11 11:19:52 -0500311#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000312
313 set_timing(regs);
314 clrsetbits_le32(&regs->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR,
315 BF(wr_unlock, CTRL_WR_UNLOCK) |
316 BF(addr, CTRL_ADDR));
317}
318
319int fuse_sense(u32 bank, u32 word, u32 *val)
320{
321 struct ocotp_regs *regs;
322 int ret;
323
Ye Lib3cf86c2019-04-17 09:41:23 +0000324 if (is_imx8mq() && is_soc_rev(CHIP_REV_2_1)) {
325 printf("mxc_ocotp %s(): fuse sense is disabled\n", __func__);
326 return -EPERM;
327 }
328
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000329 ret = prepare_read(&regs, bank, word, val, __func__);
330 if (ret)
331 return ret;
332
333 setup_direct_access(regs, bank, word, false);
334 writel(BM_READ_CTRL_READ_FUSE, &regs->read_ctrl);
335 wait_busy(regs, 1);
Adrian Alonso42c91c12015-08-11 11:19:52 -0500336#ifdef CONFIG_MX7
337 *val = readl((&regs->read_fuse_data0) + (word << 2));
338#else
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000339 *val = readl(&regs->read_fuse_data);
Adrian Alonso42c91c12015-08-11 11:19:52 -0500340#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000341
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800342#ifdef CONFIG_MX7ULP
343 if (readl(&regs->out_status) & BM_OUT_STATUS_DED) {
344 writel(BM_OUT_STATUS_DED, &regs->out_status_clr);
345 printf("mxc_ocotp %s(): fuse read wrong\n", __func__);
346 return -EIO;
347 }
348#endif
349
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000350 return finish_access(regs, __func__);
351}
352
353static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word,
354 const char *caller)
355{
Peng Fan8df42be2018-01-02 15:51:20 +0800356#ifdef CONFIG_MX7ULP
357 u32 val;
358 int ret;
359
360 /* Only bank 0 and 1 are redundancy mode, others are ECC mode */
361 if (bank != 0 && bank != 1) {
Ye Li112ad602019-04-17 09:41:20 +0000362 if ((soc_rev() < CHIP_REV_2_0) ||
363 ((soc_rev() >= CHIP_REV_2_0) &&
364 bank != 9 && bank != 10 && bank != 28)) {
365 ret = fuse_sense(bank, word, &val);
366 if (ret)
367 return ret;
Peng Fan8df42be2018-01-02 15:51:20 +0800368
Ye Li112ad602019-04-17 09:41:20 +0000369 if (val != 0) {
370 printf("mxc_ocotp: The word has been programmed, no more write\n");
371 return -EPERM;
372 }
Peng Fan8df42be2018-01-02 15:51:20 +0800373 }
374 }
375#endif
376
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000377 return prepare_access(regs, bank, word, true, caller);
378}
379
380int fuse_prog(u32 bank, u32 word, u32 val)
381{
382 struct ocotp_regs *regs;
383 int ret;
384
385 ret = prepare_write(&regs, bank, word, __func__);
386 if (ret)
387 return ret;
388
389 setup_direct_access(regs, bank, word, true);
Adrian Alonso42c91c12015-08-11 11:19:52 -0500390#ifdef CONFIG_MX7
391 switch (word) {
392 case 0:
393 writel(0, &regs->data1);
394 writel(0, &regs->data2);
395 writel(0, &regs->data3);
396 writel(val, &regs->data0);
397 break;
398 case 1:
399 writel(val, &regs->data1);
400 writel(0, &regs->data2);
401 writel(0, &regs->data3);
402 writel(0, &regs->data0);
403 break;
404 case 2:
405 writel(0, &regs->data1);
406 writel(val, &regs->data2);
407 writel(0, &regs->data3);
408 writel(0, &regs->data0);
409 break;
410 case 3:
411 writel(0, &regs->data1);
412 writel(0, &regs->data2);
413 writel(val, &regs->data3);
414 writel(0, &regs->data0);
415 break;
416 }
417 wait_busy(regs, BV_TIMING_PROG_US);
418#else
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000419 writel(val, &regs->data);
420 wait_busy(regs, BV_TIMING_STROBE_PROG_US);
Adrian Alonso42c91c12015-08-11 11:19:52 -0500421#endif
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000422 udelay(WRITE_POSTAMBLE_US);
423
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800424#ifdef CONFIG_MX7ULP
425 if (readl(&regs->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) {
426 writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), &regs->out_status_clr);
427 printf("mxc_ocotp %s(): fuse write is failed\n", __func__);
428 return -EIO;
429 }
430#endif
431
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000432 return finish_access(regs, __func__);
433}
434
435int fuse_override(u32 bank, u32 word, u32 val)
436{
437 struct ocotp_regs *regs;
438 int ret;
Peng Fan7296a022015-08-26 15:40:47 +0800439 u32 phy_bank;
Peng Fanf8b95732016-08-11 14:02:41 +0800440 u32 phy_word;
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000441
442 ret = prepare_write(&regs, bank, word, __func__);
443 if (ret)
444 return ret;
445
Peng Fan7296a022015-08-26 15:40:47 +0800446 phy_bank = fuse_bank_physical(bank);
Peng Fanf8b95732016-08-11 14:02:41 +0800447 phy_word = fuse_word_physical(bank, word);
Peng Fan7296a022015-08-26 15:40:47 +0800448
Peng Fanf8b95732016-08-11 14:02:41 +0800449 writel(val, &regs->bank[phy_bank].fuse_regs[phy_word << 2]);
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000450
Peng Fan3ca0f0d2017-02-22 16:21:46 +0800451#ifdef CONFIG_MX7ULP
452 if (readl(&regs->out_status) & (BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED)) {
453 writel((BM_OUT_STATUS_PROGFAIL | BM_OUT_STATUS_LOCKED), &regs->out_status_clr);
454 printf("mxc_ocotp %s(): fuse write is failed\n", __func__);
455 return -EIO;
456 }
457#endif
458
Benoît Thébaudeau112fd2e2013-04-23 10:17:44 +0000459 return finish_access(regs, __func__);
460}