Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 94bf34b17277c77d42ae9137262adf55143b0d48 / . / arch / arm / dts / am335x-pdu001.dts
blob: 3a5e9526635dfb6c0d8a6cc48e2df7803054ef64 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -0400[diff] [blame]1// SPDX-License-Identifier: GPL-2.0+
Felix Brack85ab0452018-01-23 18:27:22 +0100[diff] [blame]2/*
3 * pdu001.dts
4 *
5 * EETS GmbH PDU001 board device tree file
6 *
7 * Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
8 *
9 * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
Felix Brack85ab0452018-01-23 18:27:22 +0100[diff] [blame]10 */
11
12/dts-v1/;
13
14#include "am33xx.dtsi"
15#include <dt-bindings/interrupt-controller/irq.h>
16#include <dt-bindings/leds/leds-pca9532.h>
17
18/ {
19 model = "EETS,PDU001";
20 compatible = "eets,pdu001", "ti,am33xx";
21
22 chosen {
23 stdout-path = &uart3;
24 };
25
26 cpus {
27 cpu@0 {
28 cpu0-supply = <&vdd1_reg>;
29 };
30 };
31
32 memory {
33 device_type = "memory";
34 reg = <0x80000000 0x10000000>; /* 256 MB */
35 };
36
37 vbat: fixedregulator@0 {
38 compatible = "regulator-fixed";
39 regulator-name = "vbat";
40 regulator-min-microvolt = <3600000>;
41 regulator-max-microvolt = <3600000>;
42 regulator-boot-on;
43 };
44
45 lis3_reg: fixedregulator@1 {
46 compatible = "regulator-fixed";
47 regulator-name = "lis3_reg";
48 regulator-boot-on;
49 };
50
51 panel {
52 compatible = "ti,tilcdc,panel";
53 status = "okay";
54 pinctrl-names = "default";
55 pinctrl-0 = <&lcd_pins_s0>;
56 panel-info {
57 ac-bias = <255>;
58 ac-bias-intrpt = <0>;
59 dma-burst-sz = <16>;
60 bpp = <16>;
61 fdd = <0x80>;
62 sync-edge = <0>;
63 sync-ctrl = <1>;
64 raster-order = <0>;
65 fifo-th = <0>;
66 };
67
68 display-timings {
69 240x320p16 {
70 clock-frequency = <6500000>;
71 hactive = <240>;
72 vactive = <320>;
73 hfront-porch = <6>;
74 hback-porch = <6>;
75 hsync-len = <1>;
76 vback-porch = <6>;
77 vfront-porch = <6>;
78 vsync-len = <1>;
79 hsync-active = <0>;
80 vsync-active = <0>;
81 pixelclk-active = <1>;
82 de-active = <0>;
83 };
84 };
85 };
86};
87
88&am33xx_pinmux {
89 pinctrl-names = "default";
90 pinctrl-0 = <&clkout2_pin>;
91
92 i2c0_pins: pinmux_i2c0_pins {
93 pinctrl-single,pins = <
94 AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
95 AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
96 >;
97 };
98
99 i2c1_pins: pinmux_i2c1_pins {
100 pinctrl-single,pins = <
101 AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d1.i2c1_sda */
102 AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_cs0.i2c1_scl */
103 >;
104 };
105
106 i2c2_pins: pinmux_i2c2_pins {
107 pinctrl-single,pins = <
108 AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_clk.i2c2_sda */
109 AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE2) /* spi0_d0.i2c2_scl */
110 >;
111 };
112
113 spi1_pins: pinmux_spi1_pins {
114 pinctrl-single,pins = <
115 AM33XX_IOPAD(0x990, PIN_OUTPUT | MUX_MODE3) /* mcasp0_aclkx.spi1_sclk */
116 AM33XX_IOPAD(0x994, PIN_OUTPUT | MUX_MODE3) /* mcasp0_fsx.spi1_d0 */
117 AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE3) /* mcasp0_axr0.spi1_d1 */
118 AM33XX_IOPAD(0x99C, PIN_OUTPUT | MUX_MODE3) /* mcasp0_ahclkr.spi1_cs0 */
119 >;
120 };
121
122 uart0_pins: pinmux_uart0_pins {
123 pinctrl-single,pins = <
124 AM33XX_IOPAD(0x96C, PIN_OUTPUT | MUX_MODE7) /* uart0_rtsn.gpio1_9 */
125 AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
126 AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
127 >;
128 };
129
130 uart1_pins: pinmux_uart1_pins {
131 pinctrl-single,pins = <
132 AM33XX_IOPAD(0x980, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */
133 AM33XX_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
134 >;
135 };
136
137 uart3_pins: pinmux_uart3_pins {
138 pinctrl-single,pins = <
139 AM33XX_IOPAD(0x960, PIN_INPUT_PULLUP | MUX_MODE1) /* spi0_cs1.uart3_rxd */
140 AM33XX_IOPAD(0x964, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* ecap0_in_pwm0_out.uart3_txd */
141 >;
142 };
143
144 clkout2_pin: pinmux_clkout2_pin {
145 pinctrl-single,pins = <
146 AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
147 >;
148 };
149
150 cpsw_default: cpsw_default {
151 pinctrl-single,pins = <
152 /* Port 1 (emac0) */
153 AM33XX_IOPAD(0x908, PIN_INPUT | MUX_MODE0) /* mii1_col.mii1_col */
154 AM33XX_IOPAD(0x90C, PIN_INPUT | MUX_MODE0) /* mii1_crs.mii1_crs */
155 AM33XX_IOPAD(0x910, PIN_INPUT | MUX_MODE0) /* mii1_rxer.mii1_rxer */
156 AM33XX_IOPAD(0x914, PIN_OUTPUT | MUX_MODE0) /* mii1_txen.mii1_txen */
157 AM33XX_IOPAD(0x918, PIN_INPUT | MUX_MODE0) /* mii1_rxdv.mii1_rxdv */
158 AM33XX_IOPAD(0x91c, PIN_OUTPUT | MUX_MODE0) /* mii1_txd3.mii1_txd3 */
159 AM33XX_IOPAD(0x920, PIN_OUTPUT | MUX_MODE0) /* mii1_txd2.mii1_txd2 */
160 AM33XX_IOPAD(0x924, PIN_OUTPUT | MUX_MODE0) /* mii1_txd1.mii1_txd1 */
161 AM33XX_IOPAD(0x928, PIN_OUTPUT | MUX_MODE0) /* mii1_txd0.mii1_txd0 */
162 AM33XX_IOPAD(0x92c, PIN_INPUT | MUX_MODE0) /* mii1_txclk.mii1_txclk */
163 AM33XX_IOPAD(0x930, PIN_INPUT | MUX_MODE0) /* mii1_rxclk.mii1_rxclk */
164 AM33XX_IOPAD(0x934, PIN_INPUT | MUX_MODE0) /* mii1_rxd3.mii1_rxd3 */
165 AM33XX_IOPAD(0x938, PIN_INPUT | MUX_MODE0) /* mii1_rxd2.mii1_rxd2 */
166 AM33XX_IOPAD(0x93c, PIN_INPUT | MUX_MODE0) /* mii1_rxd1.mii1_rxd1 */
167 AM33XX_IOPAD(0x940, PIN_INPUT | MUX_MODE0) /* mii1_rxd0.mii1_rxd0 */
168
169 /* Port 2 (emac1) */
170 AM33XX_IOPAD(0x840, PIN_OUTPUT | MUX_MODE1) /* mii2_txen.gpmc_a0 */
171 AM33XX_IOPAD(0x844, PIN_INPUT | MUX_MODE1) /* mii2_rxdv.gpmc_a1 */
172 AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE1) /* mii2_txd3.gpmc_a2 */
173 AM33XX_IOPAD(0x84c, PIN_OUTPUT | MUX_MODE1) /* mii2_txd2.gpmc_a3 */
174 AM33XX_IOPAD(0x850, PIN_OUTPUT | MUX_MODE1) /* mii2_txd1.gpmc_a4 */
175 AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE1) /* mii2_txd0.gpmc_a5 */
176 AM33XX_IOPAD(0x858, PIN_INPUT | MUX_MODE1) /* mii2_txclk.gpmc_a6 */
177 AM33XX_IOPAD(0x85c, PIN_INPUT | MUX_MODE1) /* mii2_rxclk.gpmc_a7 */
178 AM33XX_IOPAD(0x860, PIN_INPUT | MUX_MODE1) /* mii2_rxd3.gpmc_a8 */
179 AM33XX_IOPAD(0x864, PIN_INPUT | MUX_MODE1) /* mii2_rxd2.gpmc_a9 */
180 AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE1) /* mii2_rxd1.gpmc_a10 */
181 AM33XX_IOPAD(0x86C, PIN_INPUT | MUX_MODE1) /* mii2_rxd0.gpmc_a11 */
182 AM33XX_IOPAD(0x870, PIN_INPUT | MUX_MODE1) /* mii2_crs.gpmc_wait0 */
183 AM33XX_IOPAD(0x874, PIN_INPUT | MUX_MODE1) /* mii2_rxer.gpmc_wpn */
184 AM33XX_IOPAD(0x878, PIN_INPUT | MUX_MODE1) /* mii2_col.gpmc_ben1 */
185 >;
186 };
187
188 davinci_mdio_default: davinci_mdio_default {
189 pinctrl-single,pins = <
190 AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
191 AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
192 >;
193 };
194
195 mmc1_pins: pinmux_mmc1_pins {
196 /* eMMC */
197 pinctrl-single,pins = <
198 AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
199 AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
200 AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
201 AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
202 AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
203 AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
204 >;
205 };
206
207 mmc2_pins: pinmux_mmc2_pins {
208 /* SD cardcage */
209 pinctrl-single,pins = <
210 AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
211 AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
212 AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
213 AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
214 AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
215 AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
216 /* card change signal for frontpanel SD cardcage */
217 AM33XX_IOPAD(0x890, PIN_INPUT | MUX_MODE7) /* gpmc_advn_ale.gpio2_2 */
218 >;
219 };
220
221 lcd_pins_s0: lcd_pins_s0 {
222 pinctrl-single,pins = <
223 AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
224 AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
225 AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
226 AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
227 AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
228 AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
229 AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
230 AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
231 AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
232 AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
233 AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
234 AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
235 AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
236 AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
237 AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
238 AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
239 AM33XX_IOPAD(0x8e0, PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */
240 AM33XX_IOPAD(0x8e4, PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */
241 AM33XX_IOPAD(0x8e8, PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */
242 AM33XX_IOPAD(0x8ec, PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
243 >;
244 };
245
246 dcan0_pins: pinmux_dcan0_pins {
247 pinctrl-single,pins = <
248 AM33XX_IOPAD(0x978, PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
249 AM33XX_IOPAD(0x97c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
250 >;
251 };
252};
253
254&uart0 {
255 pinctrl-names = "default";
256 pinctrl-0 = <&uart0_pins>;
257
258 rts-gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
259 rs485-rts-active-high;
260 rs485-rts-delay = <0 0>;
261 linux,rs485-enabled-at-boot-time;
262
263 status = "okay";
264};
265
266&uart1 {
267 pinctrl-names = "default";
268 pinctrl-0 = <&uart1_pins>;
269
270 status = "okay";
271};
272
273&uart3 {
274 pinctrl-names = "default";
275 pinctrl-0 = <&uart3_pins>;
276
277 status = "okay";
278};
279
280&i2c0 {
281 pinctrl-names = "default";
282 pinctrl-0 = <&i2c0_pins>;
283
284 status = "okay";
285 clock-frequency = <400000>;
286
287 tps: tps@2d {
288 reg = <0x2d>;
289 };
290
291 m2_eeprom: m2_eeprom@50 {
292 compatible = "atmel,24c256";
293 reg = <0x50>;
294 status = "okay";
295 };
296};
297
298&i2c1 {
299 pinctrl-names = "default";
300 pinctrl-0 = <&i2c1_pins>;
301
302 status = "okay";
303 clock-frequency = <100000>;
304
305 board_24aa025e48: board_24aa025e48@50 {
306 compatible = "microchip,24aa025e48";
307 reg = <0x50>;
308 };
309
310 backplane_24aa025e48: backplane_24aa025e48@53 {
311 compatible = "microchip,24aa025e48";
312 reg = <0x53>;
313 };
314
315 pca9532: pca9532@60 {
316 compatible = "nxp,pca9532";
317 reg = <0x60>;
318 psc0 = <0x97>;
319 pwm0 = <0x80>;
320 psc1 = <0x97>;
321 pwm1 = <0x10>;
322
323 run.red@0 {
324 type = <PCA9532_TYPE_LED>;
325 };
326 run.green@1 {
327 type = <PCA9532_TYPE_LED>;
328 default-state = "on";
329 };
330 s2.red@2 {
331 type = <PCA9532_TYPE_LED>;
332 };
333 s2.green@3 {
334 type = <PCA9532_TYPE_LED>;
335 };
336 s1.yellow@4 {
337 type = <PCA9532_TYPE_LED>;
338 };
339 s1.green@5 {
340 type = <PCA9532_TYPE_LED>;
341 };
342 };
343
344 pca9530: pca9530@61 {
345 compatible = "nxp,pca9530";
346 reg = <0x61>;
347
348 tft-panel@0 {
349 type = <PCA9532_TYPE_LED>;
350 linux,default-trigger = "backlight";
351 default-state = "on";
352 };
353 };
354
355 mcp79400: mcp79400@6f {
356 compatible = "microchip,mcp7940x";
357 reg = <0x6f>;
358 };
359};
360
361&i2c2 {
362 pinctrl-names = "default";
363 pinctrl-0 = <&i2c2_pins>;
364
365 status = "okay";
366 clock-frequency = <100000>;
367};
368
369&spi1 {
370 pinctrl-names = "default";
371 pinctrl-0 = <&spi1_pins>;
372 ti,pindir-d0-out-d1-in;
373 status = "okay";
374
375 cfaf240320a032t {
376 compatible = "orise,otm3225a";
377 reg = <0>;
378 spi-max-frequency = <1000000>;
379 // SPI mode 3
380 spi-cpol;
381 spi-cpha;
382 status = "okay";
383 };
384};
385
386&usb {
387 status = "okay";
388};
389
390&usb_ctrl_mod {
391 status = "okay";
392};
393
394&usb0_phy {
395 status = "okay";
396};
397
398&usb1_phy {
399 status = "okay";
400};
401
402&usb0 {
403 status = "okay";
404};
405
406&usb1 {
407 status = "okay";
408};
409
410&cppi41dma {
411 status = "okay";
412};
413
414/*
415 * Disable soc's rtc as we have no VBAT for it. This makes the board
416 * rtc (Microchip MCP79400) the default rtc device 'rtc0'.
417 */
418&rtc {
419 status = "disabled";
420};
421
422&lcdc {
423 status = "okay";
424};
425
426&elm {
427 status = "okay";
428};
429
430#include "tps65910.dtsi"
431
432&tps {
433 vcc1-supply = <&vbat>;
434 vcc2-supply = <&vbat>;
435 vcc3-supply = <&vbat>;
436 vcc4-supply = <&vbat>;
437 vcc5-supply = <&vbat>;
438 vcc6-supply = <&vbat>;
439 vcc7-supply = <&vbat>;
440 vccio-supply = <&vbat>;
441
442 regulators {
443 vrtc_reg: regulator@0 {
444 regulator-name = "ldo_vrtc";
445 regulator-always-on;
446 };
447
448 vio_reg: regulator@1 {
449 regulator-name = "buck_vdd_ddr";
450 regulator-always-on;
451 };
452
453 vdd1_reg: regulator@2 {
454 /* VDD_MPU voltage limits */
455 regulator-name = "buck_vdd_mpu";
456 regulator-min-microvolt = <912500>;
457 regulator-max-microvolt = <1312500>;
458 regulator-boot-on;
459 regulator-always-on;
460 };
461
462 vdd2_reg: regulator@3 {
463 /* VDD_CORE voltage limits */
464 regulator-name = "buck_vdd_core";
465 regulator-min-microvolt = <912500>;
466 regulator-max-microvolt = <1150000>;
467 regulator-boot-on;
468 regulator-always-on;
469 };
470
471 vdd3_reg: regulator@4 {
472 regulator-name = "boost_res";
473 regulator-always-on;
474 };
475
476 vdig1_reg: regulator@5 {
477 regulator-name = "ldo_vdig1";
478 regulator-always-on;
479 };
480
481 vdig2_reg: regulator@6 {
482 regulator-name = "ldo_vdig2";
483 regulator-always-on;
484 };
485
486 vpll_reg: regulator@7 {
487 regulator-name = "ldo_vpll";
488 regulator-always-on;
489 };
490
491 vdac_reg: regulator@8 {
492 regulator-name = "ldo_vdac";
493 regulator-always-on;
494 };
495
496 vaux1_reg: regulator@9 {
497 regulator-name = "ldo_vaux1";
498 regulator-always-on;
499 };
500
501 vaux2_reg: regulator@10 {
502 regulator-name = "ldo_vaux2";
503 regulator-always-on;
504 };
505
506 vaux33_reg: regulator@11 {
507 regulator-name = "ldo_vaux33";
508 regulator-always-on;
509 };
510
511 vmmc_reg: regulator@12 {
512 regulator-name = "ldo_vmmc";
513 regulator-min-microvolt = <1800000>;
514 regulator-max-microvolt = <3300000>;
515 regulator-always-on;
516 };
517
518 vbb_reg: regulator@13 {
519 regulator-name = "bat_vbb";
520 };
521 };
522};
523
524&mac {
525 pinctrl-names = "default";
526 pinctrl-0 = <&cpsw_default>;
527 dual_emac; /* no switch, two distinct MACs */
528 status = "okay";
529};
530
531&davinci_mdio {
532 pinctrl-names = "default";
533 pinctrl-0 = <&davinci_mdio_default>;
534 status = "okay";
535};
536
537&cpsw_emac0 {
538 phy_id = <&davinci_mdio>, <0>;
539 phy-mode = "mii";
540 dual_emac_res_vlan = <1>;
541};
542
543&cpsw_emac1 {
544 phy_id = <&davinci_mdio>, <1>;
545 phy-mode = "mii";
546 dual_emac_res_vlan = <2>;
547};
548
549&tscadc {
550 status = "okay";
551 tsc {
552 ti,wires = <4>;
553 ti,x-plate-resistance = <200>;
554 ti,coordinate-readouts = <5>;
555 ti,wire-config = <0x01 0x10 0x22 0x33>;
556 ti,charge-delay = <0x400>;
557 };
558
559 adc {
560 ti,adc-channels = <4 5 6 7>;
561 };
562};
563
564&mmc1 {
565 status = "okay";
566 vmmc-supply = <&vmmc_reg>;
567 bus-width = <4>;
568 pinctrl-names = "default";
569 pinctrl-0 = <&mmc1_pins>;
570 non-removable;
571};
572
573&mmc2 {
574 status = "okay";
575 vmmc-supply = <&vmmc_reg>;
576 bus-width = <4>;
577 pinctrl-names = "default";
578 pinctrl-0 = <&mmc2_pins>;
Felix Brackae0a1572018-11-29 13:45:06 +0100[diff] [blame]579 cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
Felix Brack85ab0452018-01-23 18:27:22 +0100[diff] [blame]580};
581
582&sham {
583 status = "okay";
584};
585
586&aes {
587 status = "okay";
588};
589
590&dcan0 {
591 status = "okay";
592 pinctrl-names = "default";
593 pinctrl-0 = <&dcan0_pins>;
594};