blob: f997bb4df202b6f922e6f57d02cfebbd0c03108c [file] [log] [blame]
Chris Packham04f57852018-05-17 21:46:00 +12001// SPDX-License-Identifier: GPL-2.0
2#include "kirkwood.dtsi"
3#include "kirkwood-6281.dtsi"
4
5/ {
6 chosen {
7 bootargs = "console=ttyS0,115200n8";
8 stdout-path = &uart0;
9 };
10
11 ocp@f1000000 {
12 pinctrl: pin-controller@10000 {
13 pmx_ns2_sata0: pmx-ns2-sata0 {
14 marvell,pins = "mpp21";
15 marvell,function = "sata0";
16 };
17 pmx_ns2_sata1: pmx-ns2-sata1 {
18 marvell,pins = "mpp20";
19 marvell,function = "sata1";
20 };
21 };
22
23 serial@12000 {
24 status = "okay";
25 };
26
27 spi@10600 {
28 status = "okay";
29
30 flash@0 {
31 #address-cells = <1>;
32 #size-cells = <1>;
33 compatible = "mxicy,mx25l4005a", "jedec,spi-nor", "spi-flash";
34 reg = <0>;
35 spi-max-frequency = <20000000>;
36 mode = <0>;
37
38 partition@0 {
39 reg = <0x0 0x80000>;
40 label = "u-boot";
41 };
42 };
43 };
44
45 i2c@11000 {
46 status = "okay";
47
48 eeprom@50 {
49 compatible = "atmel,24c04";
50 pagesize = <16>;
51 reg = <0x50>;
52 };
53 };
54 };
55
56 gpio_keys {
57 compatible = "gpio-keys";
58 #address-cells = <1>;
59 #size-cells = <0>;
60
61 power {
62 label = "Power push button";
63 linux,code = <KEY_POWER>;
64 gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
65 };
66 };
67
68 gpio-leds {
69 compatible = "gpio-leds";
70
71 red-fail {
72 label = "ns2:red:fail";
73 gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
74 };
75 };
76
77 gpio_poweroff {
78 compatible = "gpio-poweroff";
79 gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
80 };
81
82};
83
84&mdio {
85 status = "okay";
86
87 ethphy0: ethernet-phy@X {
88 /* overwrite reg property in board file */
89 };
90};
91
92&eth0 {
93 status = "okay";
94 ethernet0-port@0 {
95 phy-handle = <&ethphy0>;
96 };
97};