Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 95eca8612b7ba790dfe5d72ce3269ef3a7cdae84 / . / arch / arm / dts / hi3660-hikey960.dts
blob: 9fbfb422c822998db6527d00121080adb1fe52a8 [file] [log] [blame]
Manivannan Sadhasivam881b6322019-08-02 20:40:08 +0530[diff] [blame]1// SPDX-License-Identifier: GPL-2.0
2/*
3 * dts file for Hisilicon HiKey960 Development Board
4 *
5 * Copyright (C) 2016, Hisilicon Ltd.
6 *
7 */
8
9/dts-v1/;
10
11#include "hi3660.dtsi"
12#include "hikey960-pinctrl.dtsi"
13#include <dt-bindings/gpio/gpio.h>
14#include <dt-bindings/input/input.h>
15#include <dt-bindings/interrupt-controller/irq.h>
16
17/ {
18 model = "HiKey960";
19 compatible = "hisilicon,hi3660-hikey960", "hisilicon,hi3660";
20
21 aliases {
22 mshc1 = &dwmmc1;
23 mshc2 = &dwmmc2;
24 serial0 = &uart0;
25 serial1 = &uart1;
26 serial2 = &uart2;
27 serial3 = &uart3;
28 serial4 = &uart4;
29 serial5 = &uart5;
30 serial6 = &uart6;
31 };
32
33 chosen {
34 stdout-path = "serial6:115200n8";
35 };
36
37 memory@0 {
38 device_type = "memory";
39 /* rewrite this at bootloader */
40 reg = <0x0 0x0 0x0 0x0>;
41 };
42
43 reserved-memory {
44 #address-cells = <2>;
45 #size-cells = <2>;
46 ranges;
47
48 ramoops@32000000 {
49 compatible = "ramoops";
50 reg = <0x0 0x32000000 0x0 0x00100000>;
51 record-size = <0x00020000>;
52 console-size = <0x00020000>;
53 ftrace-size = <0x00020000>;
54 };
55 };
56
57 reboot-mode-syscon@32100000 {
58 compatible = "syscon", "simple-mfd";
59 reg = <0x0 0x32100000 0x0 0x00001000>;
60
61 reboot-mode {
62 compatible = "syscon-reboot-mode";
63 offset = <0x0>;
64
65 mode-normal = <0x77665501>;
66 mode-bootloader = <0x77665500>;
67 mode-recovery = <0x77665502>;
68 };
69 };
70
71 keys {
72 compatible = "gpio-keys";
73 pinctrl-names = "default";
74 pinctrl-0 = <&pwr_key_pmx_func &pwr_key_cfg_func>;
75
76 power {
77 wakeup-source;
78 gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
79 label = "GPIO Power";
80 linux,code = <KEY_POWER>;
81 };
82 };
83
84 leds {
85 compatible = "gpio-leds";
86
87 user_led1 {
88 label = "green:user1";
89 /* gpio_150_user_led1 */
90 gpios = <&gpio18 6 0>;
91 linux,default-trigger = "heartbeat";
92 };
93
94 user_led2 {
95 label = "green:user2";
96 /* gpio_151_user_led2 */
97 gpios = <&gpio18 7 0>;
98 linux,default-trigger = "none";
99 };
100
101 user_led3 {
102 label = "green:user3";
103 /* gpio_189_user_led3 */
104 gpios = <&gpio23 5 0>;
105 linux,default-trigger = "mmc0";
106 };
107
108 user_led4 {
109 label = "green:user4";
110 /* gpio_190_user_led4 */
111 gpios = <&gpio23 6 0>;
112 panic-indicator;
113 linux,default-trigger = "none";
114 };
115
116 wlan_active_led {
117 label = "yellow:wlan";
118 /* gpio_205_wifi_active */
119 gpios = <&gpio25 5 0>;
120 linux,default-trigger = "phy0tx";
121 default-state = "off";
122 };
123
124 bt_active_led {
125 label = "blue:bt";
126 gpios = <&gpio25 7 0>;
127 /* gpio_207_user_led1 */
128 linux,default-trigger = "hci0-power";
129 default-state = "off";
130 };
131 };
132
133 pmic: pmic@fff34000 {
134 compatible = "hisilicon,hi6421v530-pmic";
135 reg = <0x0 0xfff34000 0x0 0x1000>;
136 interrupt-controller;
137 #interrupt-cells = <2>;
138
139 regulators {
140 ldo3: LDO3 { /* HDMI */
141 regulator-name = "VOUT3_1V85";
142 regulator-min-microvolt = <1800000>;
143 regulator-max-microvolt = <2200000>;
144 regulator-enable-ramp-delay = <120>;
145 };
146
147 ldo9: LDO9 { /* SDCARD I/O */
148 regulator-name = "VOUT9_1V8_2V95";
149 regulator-min-microvolt = <1750000>;
150 regulator-max-microvolt = <3300000>;
151 regulator-enable-ramp-delay = <240>;
152 };
153
154 ldo11: LDO11 { /* Low Speed Connector */
155 regulator-name = "VOUT11_1V8_2V95";
156 regulator-min-microvolt = <1750000>;
157 regulator-max-microvolt = <3300000>;
158 regulator-enable-ramp-delay = <240>;
159 };
160
161 ldo15: LDO15 { /* UFS VCC */
162 regulator-name = "VOUT15_3V0";
163 regulator-min-microvolt = <1750000>;
164 regulator-max-microvolt = <3000000>;
165 regulator-boot-on;
166 regulator-always-on;
167 regulator-enable-ramp-delay = <120>;
168 };
169
170 ldo16: LDO16 { /* SD VDD */
171 regulator-name = "VOUT16_2V95";
172 regulator-min-microvolt = <1750000>;
173 regulator-max-microvolt = <3000000>;
174 regulator-enable-ramp-delay = <360>;
175 };
176 };
177 };
178
179 wlan_en: wlan-en-1-8v {
180 compatible = "regulator-fixed";
181 regulator-name = "wlan-en-regulator";
182 regulator-min-microvolt = <1800000>;
183 regulator-max-microvolt = <1800000>;
184
185 /* GPIO_051_WIFI_EN */
186 gpio = <&gpio6 3 0>;
187
188 /* WLAN card specific delay */
189 startup-delay-us = <70000>;
190 enable-active-high;
191 };
192
193 firmware {
194 optee {
195 compatible = "linaro,optee-tz";
196 method = "smc";
197 };
198 };
199};
200
201/*
202 * Legend: proper name = the GPIO line is used as GPIO
203 * NC = not connected (pin out but not routed from the chip to
204 * anything the board)
205 * "[PER]" = pin is muxed for [peripheral] (not GPIO)
206 * "" = no idea, schematic doesn't say, could be
207 * unrouted (not connected to any external pin)
208 * LSEC = Low Speed External Connector
209 * HSEC = High Speed External Connector
210 *
211 * Line names are taken from "HiKey 960 Board ver A" schematics
212 * from Huawei. The 40 pin low speed expansion connector is named
213 * J2002 63453-140LF.
214 *
215 * For the lines routed to the external connectors the
216 * lines are named after the 96Boards CE Specification 1.0,
217 * Appendix "Expansion Connector Signal Description".
218 *
219 * When the 96Board naming of a line and the schematic name of
220 * the same line are in conflict, the 96Board specification
221 * takes precedence, which means that the external UART on the
222 * LSEC is named UART0 while the schematic and SoC names this
223 * UART3. This is only for the informational lines i.e. "[FOO]",
224 * the GPIO named lines "GPIO-A" thru "GPIO-L" are the only
225 * ones actually used for GPIO.
226 */
227&gpio0 {
228 /* GPIO_000-GPIO_007 */
229 gpio-line-names =
230 "",
231 "TP901", /* TEST_MODE connected to TP901 */
232 "[PMU0_SSI]",
233 "[PMU1_SSI]",
234 "[PMU2_SSI]",
235 "[PMU0_CLKOUT]",
236 "[JTAG_TCK]",
237 "[JTAG_TMS]";
238};
239
240&gpio1 {
241 /* GPIO_008-GPIO_015 */
242 gpio-line-names =
243 "[JTAG_TRST_N]",
244 "[JTAG_TDI]",
245 "[JTAG_TDO]",
246 "NC", "NC",
247 "[I2C3_SCL]",
248 "[I2C3_SDA]",
249 "NC";
250};
251
252&gpio2 {
253 /* GPIO_016-GPIO_023 */
254 gpio-line-names =
255 "NC", "NC", "NC",
256 "GPIO-J", /* LSEC pin 32: GPIO_019 */
257 "GPIO_020_HDMI_SEL",
258 "GPIO-L", /* LSEC pin 34: GPIO_021 */
259 "GPIO_022_UFSBUCK_INT_N",
260 "GPIO-G"; /* LSEC pin 29: LCD_TE0 */
261};
262
263&gpio3 {
264 /* GPIO_024-GPIO_031 */
265 /* The rail from pin BK36 is named LCD_TE0, we assume to be muxed as GPIO for GPIO-G */
266 gpio-line-names =
267 "[CSI0_MCLK]", /* HSEC pin 15: ISP_CCLK0_MCAM */
268 "[CSI1_MCLK]", /* HSEC pin 17: ISP_CCLK1_SCAM */
269 "NC",
270 "[I2C2_SCL]", /* HSEC pin 32: ISP_SCL0 */
271 "[I2C2_SDA]", /* HSEC pin 34: ISP_SDA0 */
272 "[I2C3_SCL]", /* HSEC pin 36: ISP_SCL1 */
273 "[I2C3_SDA]", /* HSEC pin 38: ISP_SDA1 */
274 "NC";
275};
276
277&gpio4 {
278 /* GPIO_032-GPIO_039 */
279 gpio-line-names =
280 "NC", "NC",
281 "PWR_BTN_N", /* LSEC pin 4: GPIO_034_PWRON_DET */
282 "GPIO_035_PMU2_EN",
283 "GPIO_036_USB_HUB_RESET",
284 "NC", "NC", "NC";
285};
286
287&gpio5 {
288 /* GPIO_040-GPIO_047 */
289 gpio-line-names =
290 "GPIO-H", /* LSEC pin 30: GPIO_040_LCD_RST_N */
291 "GPIO_041_HDMI_PD",
292 "TP904", /* Test point */
293 "TP905", /* Test point */
294 "NC", "NC",
295 "GPIO_046_HUB_VDD33_EN",
296 "GPIO_047_PMU1_EN";
297};
298
299&gpio6 {
300 /* GPIO_048-GPIO_055 */
301 gpio-line-names =
302 "NC", "NC", "NC",
303 "GPIO_051_WIFI_EN",
304 "GPIO-I", /* LSEC pin 31: GPIO_052_CAM0_RST_N */
305 /*
306 * These two pins should be used for SD(IO) data according to the
307 * 96boards specification but seems to be repurposed for a IRDA UART.
308 * They are however named according to the spec.
309 */
310 "[SD_DAT1]", /* HSEC pin 3: UART0_IRDA_RXD */
311 "[SD_DAT2]", /* HSEC pin 5: UART0_IRDA_TXD */
312 "[UART1_RXD]"; /* LSEC pin 13: DEBUG_UART6_RXD */
313};
314
315&gpio7 {
316 /* GPIO_056-GPIO_063 */
317 gpio-line-names =
318 "[UART1_TXD]", /* LSEC pin 11: DEBUG_UART6_TXD */
319 "[UART0_CTS]", /* LSEC pin 3: UART3_CTS_N */
320 "[UART0_RTS]", /* LSEC pin 9: UART3_RTS_N */
321 "[UART0_RXD]", /* LSEC pin 7: UART3_RXD */
322 "[UART0_TXD]", /* LSEC pin 5: UART3_TXD */
323 "[SOC_BT_UART4_CTS_N]",
324 "[SOC_BT_UART4_RTS_N]",
325 "[SOC_BT_UART4_RXD]";
326};
327
328&gpio8 {
329 /* GPIO_064-GPIO_071 */
330 gpio-line-names =
331 "[SOC_BT_UART4_TXD]",
332 "NC",
333 "[PMU_HKADC_SSI]",
334 "NC",
335 "GPIO_068_SEL",
336 "NC", "NC", "NC";
337
338};
339
340&gpio9 {
341 /* GPIO_072-GPIO_079 */
342 gpio-line-names =
343 "NC", "NC", "NC",
344 "GPIO-K", /* LSEC pin 33: GPIO_075_CAM1_RST_N */
345 "NC", "NC", "NC", "NC";
346};
347
348&gpio10 {
349 /* GPIO_080-GPIO_087 */
350 gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
351};
352
353&gpio11 {
354 /* GPIO_088-GPIO_095 */
355 gpio-line-names =
356 "NC",
357 "[PCIE_PERST_N]",
358 "NC", "NC", "NC", "NC", "NC", "NC";
359};
360
361&gpio12 {
362 /* GPIO_096-GPIO_103 */
363 gpio-line-names = "NC", "NC", "NC", "", "", "", "", "NC";
364};
365
366&gpio13 {
367 /* GPIO_104-GPIO_111 */
368 gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
369};
370
371&gpio14 {
372 /* GPIO_112-GPIO_119 */
373 gpio-line-names = "NC", "NC", "NC", "NC", "NC", "NC", "NC", "NC";
374};
375
376&gpio15 {
377 /* GPIO_120-GPIO_127 */
378 gpio-line-names =
379 "NC", "NC", "NC", "NC", "NC", "NC",
380 "GPIO_126_BT_EN",
381 "TP902"; /* GPIO_127_JTAG_SEL0 */
382};
383
384&gpio16 {
385 /* GPIO_128-GPIO_135 */
386 gpio-line-names = "", "", "", "", "", "", "", "";
387};
388
389&gpio17 {
390 /* GPIO_136-GPIO_143 */
391 gpio-line-names = "", "", "", "", "", "", "", "";
392};
393
394&gpio18 {
395 /* GPIO_144-GPIO_151 */
396 gpio-line-names =
397 "[UFS_REF_CLK]",
398 "[UFS_RST_N]",
399 "[SPI1_SCLK]", /* HSEC pin 9: GPIO_146_SPI3_CLK */
400 "[SPI1_DIN]", /* HSEC pin 11: GPIO_147_SPI3_DI */
401 "[SPI1_DOUT]", /* HSEC pin 1: GPIO_148_SPI3_DO */
402 "[SPI1_CS]", /* HSEC pin 7: GPIO_149_SPI3_CS0_N */
403 "GPIO_150_USER_LED1",
404 "GPIO_151_USER_LED2";
405};
406
407&gpio19 {
408 /* GPIO_152-GPIO_159 */
409 gpio-line-names = "NC", "NC", "NC", "NC", "", "", "", "";
410};
411
412&gpio20 {
413 /* GPIO_160-GPIO_167 */
414 gpio-line-names =
415 "[SD_CLK]",
416 "[SD_CMD]",
417 "[SD_DATA0]",
418 "[SD_DATA1]",
419 "[SD_DATA2]",
420 "[SD_DATA3]",
421 "", "";
422};
423
424&gpio21 {
425 /* GPIO_168-GPIO_175 */
426 gpio-line-names =
427 "[WL_SDIO_CLK]",
428 "[WL_SDIO_CMD]",
429 "[WL_SDIO_DATA0]",
430 "[WL_SDIO_DATA1]",
431 "[WL_SDIO_DATA2]",
432 "[WL_SDIO_DATA3]",
433 "", "";
434};
435
436&gpio22 {
437 /* GPIO_176-GPIO_183 */
438 gpio-line-names =
439 "[GPIO_176_PMU_PWR_HOLD]",
440 "NA",
441 "[SYSCLK_EN]",
442 "GPIO_179_WL_WAKEUP_AP",
443 "GPIO_180_HDMI_INT",
444 "NA",
445 "GPIO-F", /* LSEC pin 28: LCD_BL_PWM */
446 "[I2C0_SCL]"; /* LSEC pin 15 */
447};
448
449&gpio23 {
450 /* GPIO_184-GPIO_191 */
451 gpio-line-names =
452 "[I2C0_SDA]", /* LSEC pin 17 */
453 "[I2C1_SCL]", /* Actual SoC I2C1 */
454 "[I2C1_SDA]", /* Actual SoC I2C1 */
455 "[I2C1_SCL]", /* LSEC pin 19: I2C7_SCL */
456 "[I2C1_SDA]", /* LSEC pin 21: I2C7_SDA */
457 "GPIO_189_USER_LED3",
458 "GPIO_190_USER_LED4",
459 "";
460};
461
462&gpio24 {
463 /* GPIO_192-GPIO_199 */
464 gpio-line-names =
465 "[PCM_DI]", /* LSEC pin 22: GPIO_192_I2S0_DI */
466 "[PCM_DO]", /* LSEC pin 20: GPIO_193_I2S0_DO */
467 "[PCM_CLK]", /* LSEC pin 18: GPIO_194_I2S0_XCLK */
468 "[PCM_FS]", /* LSEC pin 16: GPIO_195_I2S0_XFS */
469 "[GPIO_196_I2S2_DI]",
470 "[GPIO_197_I2S2_DO]",
471 "[GPIO_198_I2S2_XCLK]",
472 "[GPIO_199_I2S2_XFS]";
473};
474
475&gpio25 {
476 /* GPIO_200-GPIO_207 */
477 gpio-line-names =
478 "NC",
479 "NC",
480 "GPIO_202_VBUS_TYPEC",
481 "GPIO_203_SD_DET",
482 "GPIO_204_PMU12_IRQ_N",
483 "GPIO_205_WIFI_ACTIVE",
484 "GPIO_206_USBSW_SEL",
485 "GPIO_207_BT_ACTIVE";
486};
487
488&gpio26 {
489 /* GPIO_208-GPIO_215 */
490 gpio-line-names =
491 "GPIO-A", /* LSEC pin 23: GPIO_208 */
492 "GPIO-B", /* LSEC pin 24: GPIO_209 */
493 "GPIO-C", /* LSEC pin 25: GPIO_210 */
494 "GPIO-D", /* LSEC pin 26: GPIO_211 */
495 "GPIO-E", /* LSEC pin 27: GPIO_212 */
496 "[PCIE_CLKREQ_N]",
497 "[PCIE_WAKE_N]",
498 "[SPI0_CLK]"; /* LSEC pin 8: SPI2_CLK */
499};
500
501&gpio27 {
502 /* GPIO_216-GPIO_223 */
503 gpio-line-names =
504 "[SPI0_DIN]", /* LSEC pin 10: SPI2_DI */
505 "[SPI0_DOUT]", /* LSEC pin 14: SPI2_DO */
506 "[SPI0_CS]", /* LSEC pin 12: SPI2_CS0_N */
507 "GPIO_219_CC_INT",
508 "NC",
509 "NC",
510 "[PMU_INT]",
511 "";
512};
513
514&gpio28 {
515 /* GPIO_224-GPIO_231 */
516 gpio-line-names =
517 "", "", "", "", "", "", "", "";
518};
519
520&i2c0 {
521 /* On Low speed expansion */
522 label = "LS-I2C0";
523 status = "okay";
524};
525
526&i2c1 {
527 status = "okay";
528
529 adv7533: adv7533@39 {
530 status = "ok";
531 compatible = "adi,adv7533";
532 reg = <0x39>;
533 };
534};
535
536&uart3 {
537 /* On Low speed expansion */
538 label = "LS-UART0";
539 status = "okay";
540};
541
542&uart4 {
543 status = "okay";
544
545 bluetooth {
546 compatible = "ti,wl1837-st";
547 enable-gpios = <&gpio15 6 GPIO_ACTIVE_HIGH>;
548 max-speed = <3000000>;
549 };
550};
551
552&i2c7 {
553 /* On Low speed expansion */
554 label = "LS-I2C1";
555 status = "okay";
556};
557
558&uart6 {
559 /* On Low speed expansion */
560 label = "LS-UART1";
561 status = "okay";
562};
563
564&spi2 {
565 /* On Low speed expansion */
566 label = "LS-SPI0";
567 status = "okay";
568};
569
570&spi3 {
571 /* On High speed expansion */
572 label = "HS-SPI1";
573 status = "okay";
574};
575
576&dwmmc1 {
577 cd-gpios = <&gpio25 3 GPIO_ACTIVE_LOW>;
578 pinctrl-names = "default";
579 pinctrl-0 = <&sd_pmx_func
580 &sd_clk_cfg_func
581 &sd_cfg_func>;
582 vmmc-supply = <&ldo16>;
583 vqmmc-supply = <&ldo9>;
584 status = "okay";
585};
586
587&dwmmc2 { /* WIFI */
588 bus-width = <0x4>;
589 non-removable;
590 broken-cd;
591 cap-power-off-card;
592 pinctrl-names = "default";
593 pinctrl-0 = <&sdio_pmx_func
594 &sdio_clk_cfg_func
595 &sdio_cfg_func>;
596 /* WL_EN */
597 vmmc-supply = <&wlan_en>;
598 status = "ok";
599
600 wlcore: wlcore@2 {
601 compatible = "ti,wl1837";
602 reg = <2>; /* sdio func num */
603 /* WL_IRQ, GPIO_179_WL_WAKEUP_AP */
604 interrupt-parent = <&gpio22>;
605 interrupts = <3 IRQ_TYPE_EDGE_RISING>;
606 };
607};