Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / 9985bdb1cea7ba0b238f299d5bec591a144d3132 / . / arch / arm / mach-uniphier / debug_ll.S
blob: 6aa5f897a1a9d8674f184d37d6ce0395d8dea514 [file] [log] [blame]
Masahiro Yamadae6eecca2015-09-22 00:27:37 +0900[diff] [blame]1/*
2 * On-chip UART initializaion for low-level debugging
3 *
4 * Copyright (C) 2014-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8
9#include <linux/serial_reg.h>
10#include <linux/linkage.h>
Masahiro Yamada107b3fb2016-01-09 01:51:13 +0900[diff] [blame]11
12#include "bcu/bcu-regs.h"
13#include "sc-regs.h"
14#include "sg-regs.h"
Masahiro Yamadae6eecca2015-09-22 00:27:37 +0900[diff] [blame]15
16#if !defined(CONFIG_DEBUG_SEMIHOSTING)
17#include CONFIG_DEBUG_LL_INCLUDE
18#endif
19
20#define BAUDRATE 115200
21#define DIV_ROUND(x, d) (((x) + ((d) / 2)) / (d))
22
23ENTRY(debug_ll_init)
24 ldr r0, =SG_REVISION
25 ldr r1, [r0]
26 and r1, r1, #SG_REVISION_TYPE_MASK
27 mov r1, r1, lsr #SG_REVISION_TYPE_SHIFT
28
29#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD3)
30#define PH1_SLD3_UART_CLK 36864000
31 cmp r1, #0x25
32 bne ph1_sld3_end
33
34 sg_set_pinsel 64, 1, 4, 4, r0, r1 @ TXD0 -> TXD0
35
36 ldr r0, =BCSCR5
37 ldr r1, =0x24440000
38 str r1, [r0]
39
40 ldr r0, =SC_CLKCTRL
41 ldr r1, [r0]
42 orr r1, r1, #SC_CLKCTRL_CEN_PERI
43 str r1, [r0]
44
45 ldr r3, =DIV_ROUND(PH1_SLD3_UART_CLK, 16 * BAUDRATE)
46
47 b init_uart
48ph1_sld3_end:
49#endif
50#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD4)
51#define PH1_LD4_UART_CLK 36864000
52 cmp r1, #0x26
53 bne ph1_ld4_end
54
55 ldr r0, =SG_IECTRL
56 ldr r1, [r0]
57 orr r1, r1, #1
58 str r1, [r0]
59
60 sg_set_pinsel 88, 1, 8, 4, r0, r1 @ HSDOUT6 -> TXD0
61
62 ldr r3, =DIV_ROUND(PH1_LD4_UART_CLK, 16 * BAUDRATE)
63
64 b init_uart
65ph1_ld4_end:
66#endif
67#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO4)
68#define PH1_PRO4_UART_CLK 73728000
69 cmp r1, #0x28
70 bne ph1_pro4_end
71
72 sg_set_pinsel 128, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
73
74 ldr r0, =SG_LOADPINCTRL
75 mov r1, #1
76 str r1, [r0]
77
78 ldr r0, =SC_CLKCTRL
79 ldr r1, [r0]
80 orr r1, r1, #SC_CLKCTRL_CEN_PERI
81 str r1, [r0]
82
83 ldr r3, =DIV_ROUND(PH1_PRO4_UART_CLK, 16 * BAUDRATE)
84
85 b init_uart
86ph1_pro4_end:
87#endif
88#if defined(CONFIG_ARCH_UNIPHIER_PH1_SLD8)
89#define PH1_SLD8_UART_CLK 80000000
90 cmp r1, #0x29
91 bne ph1_sld8_end
92
93 ldr r0, =SG_IECTRL
94 ldr r1, [r0]
95 orr r1, r1, #1
96 str r1, [r0]
97
98 sg_set_pinsel 70, 3, 8, 4, r0, r1 @ HSDOUT0 -> TXD0
99
100 ldr r3, =DIV_ROUND(PH1_SLD8_UART_CLK, 16 * BAUDRATE)
101
102 b init_uart
103ph1_sld8_end:
104#endif
Masahiro Yamada28f40d42015-09-22 00:27:40 +0900[diff] [blame]105#if defined(CONFIG_ARCH_UNIPHIER_PH1_PRO5)
106#define PH1_PRO5_UART_CLK 73728000
107 cmp r1, #0x2A
108 bne ph1_pro5_end
109
110 sg_set_pinsel 47, 0, 4, 8, r0, r1 @ TXD0 -> TXD0
111 sg_set_pinsel 49, 0, 4, 8, r0, r1 @ TXD1 -> TXD1
112 sg_set_pinsel 51, 0, 4, 8, r0, r1 @ TXD2 -> TXD2
113 sg_set_pinsel 53, 0, 4, 8, r0, r1 @ TXD3 -> TXD3
114
115 ldr r0, =SG_LOADPINCTRL
116 mov r1, #1
117 str r1, [r0]
118
119 ldr r0, =SC_CLKCTRL
120 ldr r1, [r0]
121 orr r1, r1, #SC_CLKCTRL_CEN_PERI
122 str r1, [r0]
123
124 ldr r3, =DIV_ROUND(PH1_PRO5_UART_CLK, 16 * BAUDRATE)
125
126 b init_uart
127ph1_pro5_end:
128#endif
Masahiro Yamada019df872015-09-22 00:27:41 +0900[diff] [blame]129#if defined(CONFIG_ARCH_UNIPHIER_PROXSTREAM2)
130#define PROXSTREAM2_UART_CLK 88900000
131 cmp r1, #0x2E
132 bne proxstream2_end
133
134 ldr r0, =SG_IECTRL
135 ldr r1, [r0]
136 orr r1, r1, #1
137 str r1, [r0]
138
139 sg_set_pinsel 217, 8, 8, 4, r0, r1 @ TXD0 -> TXD0
140 sg_set_pinsel 115, 8, 8, 4, r0, r1 @ TXD1 -> TXD1
141 sg_set_pinsel 113, 8, 8, 4, r0, r1 @ TXD2 -> TXD2
142 sg_set_pinsel 219, 8, 8, 4, r0, r1 @ TXD3 -> TXD3
143
144 ldr r0, =SC_CLKCTRL
145 ldr r1, [r0]
146 orr r1, r1, #SC_CLKCTRL_CEN_PERI
147 str r1, [r0]
148
149 ldr r3, =DIV_ROUND(PROXSTREAM2_UART_CLK, 16 * BAUDRATE)
150
151 b init_uart
152proxstream2_end:
153#endif
154#if defined(CONFIG_ARCH_UNIPHIER_PH1_LD6B)
155#define PH1_LD6B_UART_CLK 88900000
156 cmp r1, #0x2F
157 bne ph1_ld6b_end
158
159 ldr r0, =SG_IECTRL
160 ldr r1, [r0]
161 orr r1, r1, #1
162 str r1, [r0]
163
164 sg_set_pinsel 135, 3, 8, 4, r0, r1 @ PORT10 -> TXD0
165 sg_set_pinsel 115, 0, 8, 4, r0, r1 @ TXD1 -> TXD1
166 sg_set_pinsel 113, 2, 8, 4, r0, r1 @ SBO0 -> TXD2
167
168 ldr r0, =SC_CLKCTRL
169 ldr r1, [r0]
170 orr r1, r1, #SC_CLKCTRL_CEN_PERI
171 str r1, [r0]
172
173 ldr r3, =DIV_ROUND(PH1_LD6B_UART_CLK, 16 * BAUDRATE)
174
175 b init_uart
176ph1_ld6b_end:
177#endif
Masahiro Yamadae6eecca2015-09-22 00:27:37 +0900[diff] [blame]178
179init_uart:
180 addruart r0, r1, r2
181 mov r1, #UART_LCR_WLEN8 << 8
182 str r1, [r0, #0x10]
183 str r3, [r0, #0x24]
184
185 mov pc, lr
186ENDPROC(debug_ll_init)