blob: 252df54e98cc2e820e4238a226133fd53392435d [file] [log] [blame]
Tim Schendekehl14c32612011-11-01 23:55:01 +00001/*
2 * (C) Copyright 2011
3 * egnite GmbH <info@egnite.de>
4 *
5 * Configuation settings for Ethernut 5 with AT91SAM9XE.
6 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02007 * SPDX-License-Identifier: GPL-2.0+
Tim Schendekehl14c32612011-11-01 23:55:01 +00008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
13#include <asm/hardware.h>
14
15/* The first stage boot loader expects u-boot running at this address. */
16#define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */
17
18/* The first stage boot loader takes care of low level initialization. */
19#define CONFIG_SKIP_LOWLEVEL_INIT
20
21/* Set our official architecture number. */
22#define MACH_TYPE_ETHERNUT5 1971
23#define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5
24
25/* CPU information */
26#define CONFIG_ARM926EJS
27#define CONFIG_AT91FAMILY
28#define CONFIG_DISPLAY_CPUINFO /* Display at console. */
29#define CONFIG_ARCH_CPU_INIT
30
31/* ARM asynchronous clock */
32#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
33#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */
Tim Schendekehl14c32612011-11-01 23:55:01 +000034
35/* 32kB internal SRAM */
36#define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */
37#define CONFIG_SRAM_SIZE (32 << 10)
Rob Herring3d6ba912012-07-13 09:44:01 +000038#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \
39 GENERATED_GBL_DATA_SIZE)
Tim Schendekehl14c32612011-11-01 23:55:01 +000040
41/* 128MB SDRAM in 1 bank */
42#define CONFIG_NR_DRAM_BANKS 1
43#define CONFIG_SYS_SDRAM_BASE 0x20000000
44#define CONFIG_SYS_SDRAM_SIZE (128 << 20)
45#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
46#define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR
47#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20))
48#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
49#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE \
50 - CONFIG_SYS_MALLOC_LEN)
51
52/* 512kB on-chip NOR flash */
53# define CONFIG_SYS_MAX_FLASH_BANKS 1
54# define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */
55# define CONFIG_AT91_EFLASH
56# define CONFIG_SYS_MAX_FLASH_SECT 32
57# define CONFIG_SYS_FLASH_PROTECTION /* First stage loader in sector 0 */
58# define CONFIG_EFLASH_PROTSECTORS 1
59
60/* 512kB DataFlash at NPCS0 */
61#define CONFIG_SYS_MAX_DATAFLASH_BANKS 1
62#define CONFIG_HAS_DATAFLASH
63#define CONFIG_SPI_FLASH
64#define CONFIG_SPI_FLASH_ATMEL
65#define CONFIG_ATMEL_DATAFLASH_SPI
66#define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000
67#define DATAFLASH_TCSS (0x1a << 16)
68#define DATAFLASH_TCHS (0x1 << 24)
69
70#define CONFIG_ENV_IS_IN_SPI_FLASH
71#define CONFIG_ENV_OFFSET 0x3DE000
72#define CONFIG_ENV_SECT_SIZE (132 << 10)
73#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
74#define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
75 + CONFIG_ENV_OFFSET)
76#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \
77 + 0x042000)
78
79/* SPI */
80#define CONFIG_ATMEL_SPI
81#define CONFIG_SYS_SPI_WRITE_TOUT (5 * CONFIG_SYS_HZ)
82#define AT91_SPI_CLK 15000000
83
84/* Serial port */
85#define CONFIG_ATMEL_USART
86#define CONFIG_USART3 /* USART 3 is DBGU */
87#define CONFIG_BAUDRATE 115200
Tim Schendekehl14c32612011-11-01 23:55:01 +000088#define CONFIG_USART_BASE ATMEL_BASE_DBGU
89#define CONFIG_USART_ID ATMEL_ID_SYS
90
91/* Misc. hardware drivers */
92#define CONFIG_AT91_GPIO
93
94/* Command line configuration */
95#include <config_cmd_default.h>
96#undef CONFIG_CMD_BDI
97#undef CONFIG_CMD_FPGA
98#undef CONFIG_CMD_LOADS
99
100#define CONFIG_CMD_JFFS2
101#define CONFIG_CMD_MII
102#define CONFIG_CMD_MTDPARTS
103#define CONFIG_CMD_NAND
104#define CONFIG_CMD_SPI
105
106#ifdef MINIMAL_LOADER
107#undef CONFIG_CMD_CONSOLE
108#undef CONFIG_CMD_EDITENV
109#undef CONFIG_CMD_IMI
110#undef CONFIG_CMD_ITEST
111#undef CONFIG_CMD_IMLS
112#undef CONFIG_CMD_LOADB
113#undef CONFIG_CMD_LOADS
114#undef CONFIG_CMD_NFS
115#undef CONFIG_CMD_SETGETDCR
116#undef CONFIG_CMD_XIMG
117#else
118#define CONFIG_CMD_ASKENV
119#define CONFIG_CMD_BSP
120#define CONFIG_CMD_CACHE
121#define CONFIG_CMD_CDP
122#define CONFIG_CMD_DATE
123#define CONFIG_CMD_DHCP
124#define CONFIG_CMD_DNS
125#define CONFIG_CMD_EXT2
126#define CONFIG_CMD_FAT
127#define CONFIG_CMD_I2C
128#define CONFIG_CMD_MMC
129#define CONFIG_CMD_PING
130#define CONFIG_CMD_RARP
131#define CONFIG_CMD_REISER
132#define CONFIG_CMD_SAVES
133#define CONFIG_CMD_SETEXPR
134#define CONFIG_CMD_SF
135#define CONFIG_CMD_SNTP
136#define CONFIG_CMD_UBI
137#define CONFIG_CMD_UBIFS
138#define CONFIG_CMD_UNZIP
139#define CONFIG_CMD_USB
140#endif
141
142/* NAND flash */
143#ifdef CONFIG_CMD_NAND
144#define CONFIG_SYS_MAX_NAND_DEVICE 1
145#define CONFIG_SYS_NAND_BASE 0x40000000
146#define CONFIG_SYS_NAND_DBW_8
147#define CONFIG_NAND_ATMEL
148/* our ALE is AD21 */
149#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
150/* our CLE is AD22 */
151#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
152#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTC, 14
153#endif
154
155/* JFFS2 */
156#ifdef CONFIG_CMD_JFFS2
157#define CONFIG_MTD_NAND_ECC_JFFS2
158#define CONFIG_JFFS2_CMDLINE
159#define CONFIG_JFFS2_NAND
160#endif
161
162/* Ethernet */
Tim Schendekehl14c32612011-11-01 23:55:01 +0000163#define CONFIG_NET_RETRY_COUNT 20
164#define CONFIG_MACB
165#define CONFIG_RMII
166#define CONFIG_PHY_ID 0
167#define CONFIG_MACB_SEARCH_PHY
168
169/* MMC */
170#ifdef CONFIG_CMD_MMC
171#define CONFIG_MMC
172#define CONFIG_GENERIC_MMC
173#define CONFIG_GENERIC_ATMEL_MCI
174#define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8
175#endif
176
177/* USB */
178#ifdef CONFIG_CMD_USB
179#define CONFIG_USB_ATMEL
Bo Shendcd2f1a2013-10-21 16:14:00 +0800180#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
Tim Schendekehl14c32612011-11-01 23:55:01 +0000181#define CONFIG_USB_OHCI_NEW
182#define CONFIG_SYS_USB_OHCI_CPU_INIT
183#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
184#define CONFIG_SYS_USB_OHCI_SLOT_NAME "host"
185#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
186#define CONFIG_USB_STORAGE
187#endif
188
189/* RTC */
190#if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP)
191#define CONFIG_RTC_PCF8563
192#define CONFIG_SYS_I2C_RTC_ADDR 0x51
193#endif
194
195/* I2C */
196#define CONFIG_SYS_MAX_I2C_BUS 1
Tim Schendekehl14c32612011-11-01 23:55:01 +0000197
Heiko Schocherea818db2013-01-29 08:53:15 +0100198#define CONFIG_SYS_I2C
199#define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */
200#define CONFIG_SYS_I2C_SOFT_SPEED 100000
201#define CONFIG_SYS_I2C_SOFT_SLAVE 0
202
Tim Schendekehl14c32612011-11-01 23:55:01 +0000203#define I2C_SOFT_DECLARATIONS
204
205#define GPIO_I2C_SCL AT91_PIO_PORTA, 24
206#define GPIO_I2C_SDA AT91_PIO_PORTA, 23
207
208#define I2C_INIT { \
209 at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \
210 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
211 at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \
212 at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \
213 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
214}
215
216#define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0)
217#define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0)
218#define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
219#define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit)
220#define I2C_DELAY udelay(100)
221#define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23)
222
223/* DHCP/BOOTP options */
224#ifdef CONFIG_CMD_DHCP
225#define CONFIG_BOOTP_BOOTFILESIZE
226#define CONFIG_BOOTP_BOOTPATH
227#define CONFIG_BOOTP_GATEWAY
228#define CONFIG_BOOTP_HOSTNAME
229#define CONFIG_SYS_AUTOLOAD "n"
230#endif
231
232/* File systems */
233#define CONFIG_MTD_DEVICE
234#define CONFIG_MTD_PARTITIONS
235#if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND)
236#define MTDIDS_DEFAULT "nand0=atmel_nand"
237#define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)"
238#endif
239#if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \
240 defined(CONFIG_CMD_USB) || defined(CONFIG_MMC)
241#define CONFIG_DOS_PARTITION
242#endif
243#define CONFIG_LZO
244#define CONFIG_RBTREE
245
246/* Boot command */
247#define CONFIG_BOOTDELAY 3
248#define CONFIG_CMDLINE_TAG
249#define CONFIG_SETUP_MEMORY_TAGS
250#define CONFIG_INITRD_TAG
251#define CONFIG_BOOTCOMMAND "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm"
252#if defined(CONFIG_CMD_NAND)
253#define CONFIG_BOOTARGS "console=ttyS0,115200 " \
254 "root=/dev/mtdblock0 " \
255 MTDPARTS_DEFAULT \
256 " rw rootfstype=jffs2"
257#endif
258
259/* Misc. u-boot settings */
260#define CONFIG_SYS_PROMPT "U-Boot> "
261#define CONFIG_SYS_HUSH_PARSER
Tim Schendekehl14c32612011-11-01 23:55:01 +0000262#define CONFIG_SYS_CBSIZE 256
263#define CONFIG_SYS_MAXARGS 16
264#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \
265 + sizeof(CONFIG_SYS_PROMPT))
266#define CONFIG_SYS_LONGHELP
267#define CONFIG_CMDLINE_EDITING
268
269#endif