blob: 965e4f1ec8fe3f1359f2e1aba4495d3ac43704f7 [file] [log] [blame]
Eric Benard3cbeb0f2014-04-04 19:05:55 +02001/*
2 * Copyright (C) 2014 Eukréa Electromatique
3 * Author: Eric Bénard <eric@eukrea.com>
4 * Fabio Estevam <fabio.estevam@freescale.com>
5 * Jon Nettleton <jon.nettleton@gmail.com>
6 *
7 * based on sabresd.c which is :
8 * Copyright (C) 2012 Freescale Semiconductor, Inc.
9 * and on hummingboard.c which is :
10 * Copyright (C) 2013 SolidRun ltd.
11 * Copyright (C) 2013 Jon Nettleton <jon.nettleton@gmail.com>.
12 *
13 * SPDX-License-Identifier: GPL-2.0+
14 */
15
16#include <asm/arch/clock.h>
17#include <asm/arch/sys_proto.h>
18#include <asm/arch/imx-regs.h>
19#include <asm/arch/iomux.h>
20#include <asm/arch/mx6-pins.h>
Masahiro Yamada1221ce42016-09-21 11:28:55 +090021#include <linux/errno.h>
Eric Benard3cbeb0f2014-04-04 19:05:55 +020022#include <asm/gpio.h>
Stefano Babic552a8482017-06-29 10:16:06 +020023#include <asm/mach-imx/iomux-v3.h>
24#include <asm/mach-imx/boot_mode.h>
25#include <asm/mach-imx/mxc_i2c.h>
26#include <asm/mach-imx/spi.h>
27#include <asm/mach-imx/video.h>
Eric Benard3cbeb0f2014-04-04 19:05:55 +020028#include <i2c.h>
Diego Dorta7594c512017-09-22 12:12:18 -030029#include <input.h>
Eric Benard3cbeb0f2014-04-04 19:05:55 +020030#include <mmc.h>
31#include <fsl_esdhc.h>
32#include <miiphy.h>
33#include <netdev.h>
34#include <asm/arch/mxc_hdmi.h>
35#include <asm/arch/crm_regs.h>
36#include <linux/fb.h>
37#include <ipu_pixfmt.h>
38#include <asm/io.h>
Lukasz Majewski8ea754d2017-11-07 11:10:29 +010039
Eric Benard3cbeb0f2014-04-04 19:05:55 +020040DECLARE_GLOBAL_DATA_PTR;
41
42#define UART_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
43 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | \
44 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
45
46#define USDHC_PAD_CTRL (PAD_CTL_PUS_47K_UP | \
47 PAD_CTL_SPEED_LOW | PAD_CTL_DSE_80ohm | \
48 PAD_CTL_SRE_FAST | PAD_CTL_HYS)
49
50#define USDHC_PAD_CLK_CTRL (PAD_CTL_SPEED_LOW | \
51 PAD_CTL_DSE_80ohm | PAD_CTL_SRE_FAST | \
52 PAD_CTL_HYS)
53
54#define ENET_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
55 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
56
57#define ENET_PAD_CTRL_PD (PAD_CTL_PUS_100K_DOWN | \
58 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS)
59
60#define ENET_PAD_CTRL_CLK ((PAD_CTL_PUS_100K_UP & ~PAD_CTL_PKE) | \
61 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
62
63#define I2C_PAD_CTRL (PAD_CTL_PUS_100K_UP | \
64 PAD_CTL_SPEED_MED | PAD_CTL_DSE_40ohm | PAD_CTL_HYS | \
65 PAD_CTL_ODE | PAD_CTL_SRE_FAST)
66
67#define SPI_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_SPEED_MED | \
68 PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST)
69
70static int board_type = -1;
71#define BOARD_IS_MARSBOARD 0
72#define BOARD_IS_RIOTBOARD 1
73
74int dram_init(void)
75{
76 gd->ram_size = get_ram_size((void *)PHYS_SDRAM, PHYS_SDRAM_SIZE);
77
78 return 0;
79}
80
81static iomux_v3_cfg_t const uart2_pads[] = {
82 MX6_PAD_EIM_D26__UART2_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
83 MX6_PAD_EIM_D27__UART2_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL),
84};
85
86static void setup_iomux_uart(void)
87{
88 imx_iomux_v3_setup_multiple_pads(uart2_pads, ARRAY_SIZE(uart2_pads));
89}
90
91iomux_v3_cfg_t const enet_pads[] = {
92 MX6_PAD_ENET_MDIO__ENET_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL),
93 MX6_PAD_ENET_MDC__ENET_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL),
94 /* GPIO16 -> AR8035 25MHz */
95 MX6_PAD_GPIO_16__ENET_REF_CLK | MUX_PAD_CTRL(NO_PAD_CTRL),
96 MX6_PAD_RGMII_TXC__RGMII_TXC | MUX_PAD_CTRL(NO_PAD_CTRL),
97 MX6_PAD_RGMII_TD0__RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL),
98 MX6_PAD_RGMII_TD1__RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL),
99 MX6_PAD_RGMII_TD2__RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
100 MX6_PAD_RGMII_TD3__RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
101 MX6_PAD_RGMII_TX_CTL__RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL),
102 /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */
103 MX6_PAD_ENET_REF_CLK__ENET_TX_CLK | MUX_PAD_CTRL(ENET_PAD_CTRL_CLK),
104 MX6_PAD_RGMII_RXC__RGMII_RXC | MUX_PAD_CTRL(ENET_PAD_CTRL),
105 MX6_PAD_RGMII_RD0__RGMII_RD0 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
106 MX6_PAD_RGMII_RD1__RGMII_RD1 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
107 MX6_PAD_RGMII_RD2__RGMII_RD2 | MUX_PAD_CTRL(ENET_PAD_CTRL),
108 MX6_PAD_RGMII_RD3__RGMII_RD3 | MUX_PAD_CTRL(ENET_PAD_CTRL),
109 MX6_PAD_RGMII_RX_CTL__RGMII_RX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
110 /* AR8035 PHY Reset */
111 MX6_PAD_EIM_D31__GPIO3_IO31 | MUX_PAD_CTRL(ENET_PAD_CTRL_PD),
112 /* AR8035 PHY Interrupt */
113 MX6_PAD_ENET_TX_EN__GPIO1_IO28 | MUX_PAD_CTRL(ENET_PAD_CTRL),
114};
115
116static void setup_iomux_enet(void)
117{
118 imx_iomux_v3_setup_multiple_pads(enet_pads, ARRAY_SIZE(enet_pads));
119
120 /* Reset AR8035 PHY */
121 gpio_direction_output(IMX_GPIO_NR(3, 31) , 0);
122 mdelay(2);
123 gpio_set_value(IMX_GPIO_NR(3, 31), 1);
124}
125
126int mx6_rgmii_rework(struct phy_device *phydev)
127{
128 /* from linux/arch/arm/mach-imx/mach-imx6q.c :
129 * Ar803x phy SmartEEE feature cause link status generates glitch,
130 * which cause ethernet link down/up issue, so disable SmartEEE
131 */
132 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x7);
133 phy_write(phydev, MDIO_DEVAD_NONE, 0xe, 0x805d);
134 phy_write(phydev, MDIO_DEVAD_NONE, 0xd, 0x4003);
135
136 return 0;
137}
138
139int board_phy_config(struct phy_device *phydev)
140{
141 mx6_rgmii_rework(phydev);
142
143 if (phydev->drv->config)
144 phydev->drv->config(phydev);
145
146 return 0;
147}
148
149iomux_v3_cfg_t const usdhc2_pads[] = {
150 MX6_PAD_SD2_CLK__SD2_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
151 MX6_PAD_SD2_CMD__SD2_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
152 MX6_PAD_SD2_DAT0__SD2_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
153 MX6_PAD_SD2_DAT1__SD2_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
154 MX6_PAD_SD2_DAT2__SD2_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
155 MX6_PAD_SD2_DAT3__SD2_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
156 MX6_PAD_GPIO_2__GPIO1_IO02 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
157 MX6_PAD_GPIO_4__GPIO1_IO04 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
158};
159
160iomux_v3_cfg_t const usdhc3_pads[] = {
161 MX6_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
162 MX6_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
163 MX6_PAD_SD3_DAT0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
164 MX6_PAD_SD3_DAT1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
165 MX6_PAD_SD3_DAT2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
166 MX6_PAD_SD3_DAT3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
167};
168
169iomux_v3_cfg_t const riotboard_usdhc3_pads[] = {
170 MX6_PAD_SD3_DAT4__GPIO7_IO01 | MUX_PAD_CTRL(NO_PAD_CTRL), /* WP */
171 MX6_PAD_SD3_DAT5__GPIO7_IO00 | MUX_PAD_CTRL(NO_PAD_CTRL), /* CD */
172};
173
174iomux_v3_cfg_t const usdhc4_pads[] = {
175 MX6_PAD_SD4_CLK__SD4_CLK | MUX_PAD_CTRL(USDHC_PAD_CLK_CTRL),
176 MX6_PAD_SD4_CMD__SD4_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL),
177 MX6_PAD_SD4_DAT0__SD4_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
178 MX6_PAD_SD4_DAT1__SD4_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
179 MX6_PAD_SD4_DAT2__SD4_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
180 MX6_PAD_SD4_DAT3__SD4_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL),
181 /* eMMC RST */
182 MX6_PAD_NANDF_ALE__GPIO6_IO08 | MUX_PAD_CTRL(NO_PAD_CTRL),
183};
184
185#ifdef CONFIG_FSL_ESDHC
186struct fsl_esdhc_cfg usdhc_cfg[3] = {
187 {USDHC2_BASE_ADDR},
188 {USDHC3_BASE_ADDR},
189 {USDHC4_BASE_ADDR},
190};
191
192#define USDHC2_CD_GPIO IMX_GPIO_NR(1, 4)
193#define USDHC3_CD_GPIO IMX_GPIO_NR(7, 0)
194
195int board_mmc_getcd(struct mmc *mmc)
196{
197 struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv;
198 int ret = 0;
199
200 switch (cfg->esdhc_base) {
201 case USDHC2_BASE_ADDR:
202 ret = !gpio_get_value(USDHC2_CD_GPIO);
203 break;
204 case USDHC3_BASE_ADDR:
205 if (board_type == BOARD_IS_RIOTBOARD)
206 ret = !gpio_get_value(USDHC3_CD_GPIO);
207 else if (board_type == BOARD_IS_MARSBOARD)
208 ret = 1; /* eMMC/uSDHC3 is always present */
209 break;
210 case USDHC4_BASE_ADDR:
211 ret = 1; /* eMMC/uSDHC4 is always present */
212 break;
213 }
214
215 return ret;
216}
217
218int board_mmc_init(bd_t *bis)
219{
Fabio Estevame7eb2772014-11-21 16:42:58 -0200220 int ret;
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200221 int i;
222
223 /*
224 * According to the board_mmc_init() the following map is done:
Bin Menga1875592016-02-05 19:30:11 -0800225 * (U-Boot device node) (Physical Port)
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200226 * ** RiOTboard :
227 * mmc0 SDCard slot (bottom)
228 * mmc1 uSDCard slot (top)
229 * mmc2 eMMC
230 * ** MarSBoard :
231 * mmc0 uSDCard slot (bottom)
232 * mmc1 eMMC
233 */
234 for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) {
235 switch (i) {
236 case 0:
237 imx_iomux_v3_setup_multiple_pads(
238 usdhc2_pads, ARRAY_SIZE(usdhc2_pads));
239 gpio_direction_input(USDHC2_CD_GPIO);
240 usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC2_CLK);
241 usdhc_cfg[0].max_bus_width = 4;
242 break;
243 case 1:
244 imx_iomux_v3_setup_multiple_pads(
245 usdhc3_pads, ARRAY_SIZE(usdhc3_pads));
246 if (board_type == BOARD_IS_RIOTBOARD) {
247 imx_iomux_v3_setup_multiple_pads(
248 riotboard_usdhc3_pads,
249 ARRAY_SIZE(riotboard_usdhc3_pads));
250 gpio_direction_input(USDHC3_CD_GPIO);
Iain Paton015e2152014-06-09 23:08:35 +0100251 } else {
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200252 gpio_direction_output(IMX_GPIO_NR(7, 8) , 0);
253 udelay(250);
254 gpio_set_value(IMX_GPIO_NR(7, 8), 1);
255 }
256 usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
257 usdhc_cfg[1].max_bus_width = 4;
258 break;
259 case 2:
260 imx_iomux_v3_setup_multiple_pads(
261 usdhc4_pads, ARRAY_SIZE(usdhc4_pads));
262 usdhc_cfg[2].sdhc_clk = mxc_get_clock(MXC_ESDHC4_CLK);
263 usdhc_cfg[2].max_bus_width = 4;
264 gpio_direction_output(IMX_GPIO_NR(6, 8) , 0);
265 udelay(250);
266 gpio_set_value(IMX_GPIO_NR(6, 8), 1);
267 break;
268 default:
269 printf("Warning: you configured more USDHC controllers"
270 "(%d) then supported by the board (%d)\n",
271 i + 1, CONFIG_SYS_FSL_USDHC_NUM);
Fabio Estevame7eb2772014-11-21 16:42:58 -0200272 return -EINVAL;
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200273 }
274
Fabio Estevame7eb2772014-11-21 16:42:58 -0200275 ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]);
276 if (ret)
277 return ret;
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200278 }
279
Fabio Estevame7eb2772014-11-21 16:42:58 -0200280 return 0;
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200281}
282#endif
283
284#ifdef CONFIG_MXC_SPI
285iomux_v3_cfg_t const ecspi1_pads[] = {
286 MX6_PAD_EIM_D16__ECSPI1_SCLK | MUX_PAD_CTRL(SPI_PAD_CTRL),
287 MX6_PAD_EIM_D17__ECSPI1_MISO | MUX_PAD_CTRL(SPI_PAD_CTRL),
288 MX6_PAD_EIM_D18__ECSPI1_MOSI | MUX_PAD_CTRL(SPI_PAD_CTRL),
289 MX6_PAD_EIM_EB2__GPIO2_IO30 | MUX_PAD_CTRL(NO_PAD_CTRL),
290};
291
Nikita Kiryanov155fa9a2014-08-20 15:08:50 +0300292int board_spi_cs_gpio(unsigned bus, unsigned cs)
293{
294 return (bus == 0 && cs == 0) ? (IMX_GPIO_NR(2, 30)) : -1;
295}
296
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200297static void setup_spi(void)
298{
299 imx_iomux_v3_setup_multiple_pads(ecspi1_pads, ARRAY_SIZE(ecspi1_pads));
300}
301#endif
302
303struct i2c_pads_info i2c_pad_info1 = {
304 .scl = {
305 .i2c_mode = MX6_PAD_CSI0_DAT9__I2C1_SCL
306 | MUX_PAD_CTRL(I2C_PAD_CTRL),
307 .gpio_mode = MX6_PAD_CSI0_DAT9__GPIO5_IO27
308 | MUX_PAD_CTRL(I2C_PAD_CTRL),
309 .gp = IMX_GPIO_NR(5, 27)
310 },
311 .sda = {
312 .i2c_mode = MX6_PAD_CSI0_DAT8__I2C1_SDA
313 | MUX_PAD_CTRL(I2C_PAD_CTRL),
314 .gpio_mode = MX6_PAD_CSI0_DAT8__GPIO5_IO26
315 | MUX_PAD_CTRL(I2C_PAD_CTRL),
316 .gp = IMX_GPIO_NR(5, 26)
317 }
318};
319
320struct i2c_pads_info i2c_pad_info2 = {
321 .scl = {
322 .i2c_mode = MX6_PAD_KEY_COL3__I2C2_SCL
323 | MUX_PAD_CTRL(I2C_PAD_CTRL),
324 .gpio_mode = MX6_PAD_KEY_COL3__GPIO4_IO12
325 | MUX_PAD_CTRL(I2C_PAD_CTRL),
326 .gp = IMX_GPIO_NR(4, 12)
327 },
328 .sda = {
329 .i2c_mode = MX6_PAD_KEY_ROW3__I2C2_SDA
330 | MUX_PAD_CTRL(I2C_PAD_CTRL),
331 .gpio_mode = MX6_PAD_KEY_ROW3__GPIO4_IO13
332 | MUX_PAD_CTRL(I2C_PAD_CTRL),
333 .gp = IMX_GPIO_NR(4, 13)
334 }
335};
336
337struct i2c_pads_info i2c_pad_info3 = {
338 .scl = {
339 .i2c_mode = MX6_PAD_GPIO_5__I2C3_SCL
340 | MUX_PAD_CTRL(I2C_PAD_CTRL),
341 .gpio_mode = MX6_PAD_GPIO_5__GPIO1_IO05
342 | MUX_PAD_CTRL(I2C_PAD_CTRL),
343 .gp = IMX_GPIO_NR(1, 5)
344 },
345 .sda = {
346 .i2c_mode = MX6_PAD_GPIO_6__I2C3_SDA
347 | MUX_PAD_CTRL(I2C_PAD_CTRL),
348 .gpio_mode = MX6_PAD_GPIO_6__GPIO1_IO06
349 | MUX_PAD_CTRL(I2C_PAD_CTRL),
350 .gp = IMX_GPIO_NR(1, 6)
351 }
352};
353
354iomux_v3_cfg_t const tft_pads_riot[] = {
355 /* LCD_PWR_EN */
356 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
357 /* TOUCH_INT */
358 MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
359 /* LED_PWR_EN */
360 MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
361 /* BL LEVEL */
362 MX6_PAD_SD1_CMD__GPIO1_IO18 | MUX_PAD_CTRL(NO_PAD_CTRL),
363};
364
365iomux_v3_cfg_t const tft_pads_mars[] = {
366 /* LCD_PWR_EN */
367 MX6_PAD_ENET_TXD1__GPIO1_IO29 | MUX_PAD_CTRL(NO_PAD_CTRL),
368 /* TOUCH_INT */
369 MX6_PAD_NANDF_CS1__GPIO6_IO14 | MUX_PAD_CTRL(NO_PAD_CTRL),
370 /* LED_PWR_EN */
371 MX6_PAD_NANDF_CS2__GPIO6_IO15 | MUX_PAD_CTRL(NO_PAD_CTRL),
372 /* BL LEVEL (PWM4) */
373 MX6_PAD_SD4_DAT2__GPIO2_IO10 | MUX_PAD_CTRL(NO_PAD_CTRL),
374};
375
376#if defined(CONFIG_VIDEO_IPUV3)
377
378static void enable_lvds(struct display_info_t const *dev)
379{
380 struct iomuxc *iomux = (struct iomuxc *)
381 IOMUXC_BASE_ADDR;
382 setbits_le32(&iomux->gpr[2],
383 IOMUXC_GPR2_DATA_WIDTH_CH0_24BIT);
384 /* set backlight level to ON */
385 if (board_type == BOARD_IS_RIOTBOARD)
386 gpio_direction_output(IMX_GPIO_NR(1, 18) , 1);
387 else if (board_type == BOARD_IS_MARSBOARD)
388 gpio_direction_output(IMX_GPIO_NR(2, 10) , 1);
389}
390
391static void disable_lvds(struct display_info_t const *dev)
392{
393 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
394
395 /* set backlight level to OFF */
396 if (board_type == BOARD_IS_RIOTBOARD)
397 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
398 else if (board_type == BOARD_IS_MARSBOARD)
399 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
400
401 clrbits_le32(&iomux->gpr[2],
402 IOMUXC_GPR2_LVDS_CH0_MODE_MASK);
403}
404
Eric Benard3cbeb0f2014-04-04 19:05:55 +0200405static void do_enable_hdmi(struct display_info_t const *dev)
406{
407 disable_lvds(dev);
408 imx_enable_hdmi_phy();
409}
410
411static int detect_i2c(struct display_info_t const *dev)
412{
413 return (0 == i2c_set_bus_num(dev->bus)) &&
414 (0 == i2c_probe(dev->addr));
415}
416
417struct display_info_t const displays[] = {{
418 .bus = -1,
419 .addr = 0,
420 .pixfmt = IPU_PIX_FMT_RGB24,
421 .detect = detect_hdmi,
422 .enable = do_enable_hdmi,
423 .mode = {
424 .name = "HDMI",
425 .refresh = 60,
426 .xres = 1024,
427 .yres = 768,
428 .pixclock = 15385,
429 .left_margin = 220,
430 .right_margin = 40,
431 .upper_margin = 21,
432 .lower_margin = 7,
433 .hsync_len = 60,
434 .vsync_len = 10,
435 .sync = FB_SYNC_EXT,
436 .vmode = FB_VMODE_NONINTERLACED
437} }, {
438 .bus = 2,
439 .addr = 0x1,
440 .pixfmt = IPU_PIX_FMT_LVDS666,
441 .detect = detect_i2c,
442 .enable = enable_lvds,
443 .mode = {
444 .name = "LCD8000-97C",
445 .refresh = 60,
446 .xres = 1024,
447 .yres = 768,
448 .pixclock = 15385,
449 .left_margin = 100,
450 .right_margin = 200,
451 .upper_margin = 10,
452 .lower_margin = 20,
453 .hsync_len = 20,
454 .vsync_len = 8,
455 .sync = FB_SYNC_EXT,
456 .vmode = FB_VMODE_NONINTERLACED
457} } };
458size_t display_count = ARRAY_SIZE(displays);
459
460static void setup_display(void)
461{
462 struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
463 struct iomuxc *iomux = (struct iomuxc *)IOMUXC_BASE_ADDR;
464 int reg;
465
466 enable_ipu_clock();
467 imx_setup_hdmi();
468
469 /* Turn on LDB0, IPU,IPU DI0 clocks */
470 setbits_le32(&mxc_ccm->CCGR3,
471 MXC_CCM_CCGR3_LDB_DI0_MASK);
472
473 /* set LDB0 clk select to 011/011 */
474 clrsetbits_le32(&mxc_ccm->cs2cdr,
475 MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_MASK,
476 (3 << MXC_CCM_CS2CDR_LDB_DI0_CLK_SEL_OFFSET));
477
478 setbits_le32(&mxc_ccm->cscmr2,
479 MXC_CCM_CSCMR2_LDB_DI0_IPU_DIV);
480
481 setbits_le32(&mxc_ccm->chsccdr,
482 (CHSCCDR_CLK_SEL_LDB_DI0
483 << MXC_CCM_CHSCCDR_IPU1_DI0_CLK_SEL_OFFSET));
484
485 reg = IOMUXC_GPR2_BGREF_RRMODE_EXTERNAL_RES
486 | IOMUXC_GPR2_DI0_VS_POLARITY_ACTIVE_LOW
487 | IOMUXC_GPR2_BIT_MAPPING_CH1_SPWG
488 | IOMUXC_GPR2_DATA_WIDTH_CH1_18BIT
489 | IOMUXC_GPR2_BIT_MAPPING_CH0_SPWG
490 | IOMUXC_GPR2_DATA_WIDTH_CH0_18BIT
491 | IOMUXC_GPR2_LVDS_CH1_MODE_DISABLED
492 | IOMUXC_GPR2_LVDS_CH0_MODE_ENABLED_DI0;
493 writel(reg, &iomux->gpr[2]);
494
495 clrsetbits_le32(&iomux->gpr[3],
496 IOMUXC_GPR3_LVDS0_MUX_CTL_MASK |
497 IOMUXC_GPR3_HDMI_MUX_CTL_MASK,
498 IOMUXC_GPR3_MUX_SRC_IPU1_DI0
499 << IOMUXC_GPR3_LVDS0_MUX_CTL_OFFSET);
500}
501#endif /* CONFIG_VIDEO_IPUV3 */
502
503/*
504 * Do not overwrite the console
505 * Use always serial for U-Boot console
506 */
507int overwrite_console(void)
508{
509 return 1;
510}
511
512int board_eth_init(bd_t *bis)
513{
514 setup_iomux_enet();
515
516 return cpu_eth_init(bis);
517}
518
519int board_early_init_f(void)
520{
521 u32 cputype = cpu_type(get_cpu_rev());
522
523 switch (cputype) {
524 case MXC_CPU_MX6SOLO:
525 board_type = BOARD_IS_RIOTBOARD;
526 break;
527 case MXC_CPU_MX6D:
528 board_type = BOARD_IS_MARSBOARD;
529 break;
530 }
531
532 setup_iomux_uart();
533
534 if (board_type == BOARD_IS_RIOTBOARD)
535 imx_iomux_v3_setup_multiple_pads(
536 tft_pads_riot, ARRAY_SIZE(tft_pads_riot));
537 else if (board_type == BOARD_IS_MARSBOARD)
538 imx_iomux_v3_setup_multiple_pads(
539 tft_pads_mars, ARRAY_SIZE(tft_pads_mars));
540#if defined(CONFIG_VIDEO_IPUV3)
541 /* power ON LCD */
542 gpio_direction_output(IMX_GPIO_NR(1, 29) , 1);
543 /* touch interrupt is an input */
544 gpio_direction_input(IMX_GPIO_NR(6, 14));
545 /* power ON backlight */
546 gpio_direction_output(IMX_GPIO_NR(6, 15) , 1);
547 /* set backlight level to off */
548 if (board_type == BOARD_IS_RIOTBOARD)
549 gpio_direction_output(IMX_GPIO_NR(1, 18) , 0);
550 else if (board_type == BOARD_IS_MARSBOARD)
551 gpio_direction_output(IMX_GPIO_NR(2, 10) , 0);
552 setup_display();
553#endif
554
555 return 0;
556}
557
558int board_init(void)
559{
560 /* address of boot parameters */
561 gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
562 /* i2c1 : PMIC, Audio codec on RiOT, Expansion connector on MarS */
563 setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1);
564 /* i2c2 : HDMI EDID */
565 setup_i2c(1, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info2);
566 /* i2c3 : LVDS, Expansion connector */
567 setup_i2c(2, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info3);
568#ifdef CONFIG_MXC_SPI
569 setup_spi();
570#endif
571 return 0;
572}
573
574#ifdef CONFIG_CMD_BMODE
575static const struct boot_mode riotboard_boot_modes[] = {
576 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
577 {"sd3", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
578 {"emmc", MAKE_CFGVAL(0x40, 0x38, 0x00, 0x00)},
579 {NULL, 0},
580};
581static const struct boot_mode marsboard_boot_modes[] = {
582 {"sd2", MAKE_CFGVAL(0x40, 0x28, 0x00, 0x00)},
583 {"emmc", MAKE_CFGVAL(0x40, 0x30, 0x00, 0x00)},
584 {NULL, 0},
585};
586#endif
587
588int board_late_init(void)
589{
590#ifdef CONFIG_CMD_BMODE
591 if (board_type == BOARD_IS_RIOTBOARD)
592 add_board_boot_modes(riotboard_boot_modes);
593 else if (board_type == BOARD_IS_RIOTBOARD)
594 add_board_boot_modes(marsboard_boot_modes);
595#endif
596
597 return 0;
598}
599
600int checkboard(void)
601{
602 puts("Board: ");
603 if (board_type == BOARD_IS_MARSBOARD)
604 puts("MarSBoard\n");
605 else if (board_type == BOARD_IS_RIOTBOARD)
606 puts("RIoTboard\n");
607 else
608 printf("unknown - cputype : %02x\n", cpu_type(get_cpu_rev()));
609
610 return 0;
611}