Andy Yan | e2901ab | 2017-05-15 17:53:50 +0800 | [diff] [blame] | 1 | /* |
| 2 | * (C) Copyright 2017 Rockchip Electronics Co., Ltd |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | /dts-v1/; |
| 8 | #include "rk3368.dtsi" |
| 9 | #include <dt-bindings/input/input.h> |
| 10 | |
| 11 | / { |
| 12 | model = "Rockchip sheep board"; |
| 13 | compatible = "rockchip,sheep", "rockchip,rk3368"; |
| 14 | |
| 15 | chosen { |
| 16 | stdout-path = "serial2:115200n8"; |
| 17 | }; |
| 18 | |
| 19 | memory@0 { |
| 20 | device_type = "memory"; |
| 21 | reg = <0x0 0x0 0x0 0x80000000>; |
| 22 | }; |
| 23 | |
| 24 | ext_gmac: gmac-clk { |
| 25 | compatible = "fixed-clock"; |
| 26 | clock-frequency = <125000000>; |
| 27 | clock-output-names = "ext_gmac"; |
| 28 | #clock-cells = <0>; |
| 29 | }; |
| 30 | |
| 31 | ir: ir-receiver { |
| 32 | compatible = "gpio-ir-receiver"; |
| 33 | gpios = <&gpio3 30 GPIO_ACTIVE_LOW>; |
| 34 | pinctrl-names = "default"; |
| 35 | pinctrl-0 = <&ir_int>; |
| 36 | }; |
| 37 | |
| 38 | keys: gpio-keys { |
| 39 | compatible = "gpio-keys"; |
| 40 | pinctrl-names = "default"; |
| 41 | pinctrl-0 = <&pwr_key>; |
| 42 | |
| 43 | power { |
| 44 | gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; |
| 45 | label = "GPIO Power"; |
| 46 | linux,code = <KEY_POWER>; |
| 47 | wakeup-source; |
| 48 | }; |
| 49 | }; |
| 50 | |
| 51 | leds: gpio-leds { |
| 52 | compatible = "gpio-leds"; |
| 53 | |
| 54 | blue { |
| 55 | gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; |
| 56 | label = "geekbox:blue:led"; |
| 57 | default-state = "on"; |
| 58 | }; |
| 59 | |
| 60 | red { |
| 61 | gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>; |
| 62 | label = "geekbox:red:led"; |
| 63 | default-state = "off"; |
| 64 | }; |
| 65 | }; |
| 66 | |
| 67 | vcc_sys: vcc-sys-regulator { |
| 68 | compatible = "regulator-fixed"; |
| 69 | regulator-name = "vcc_sys"; |
| 70 | regulator-min-microvolt = <5000000>; |
| 71 | regulator-max-microvolt = <5000000>; |
| 72 | regulator-always-on; |
| 73 | regulator-boot-on; |
| 74 | }; |
| 75 | }; |
| 76 | |
| 77 | &emmc { |
| 78 | status = "okay"; |
| 79 | bus-width = <8>; |
| 80 | cap-mmc-highspeed; |
| 81 | clock-frequency = <150000000>; |
| 82 | disable-wp; |
| 83 | keep-power-in-suspend; |
| 84 | non-removable; |
| 85 | num-slots = <1>; |
| 86 | vmmc-supply = <&vcc_io>; |
| 87 | vqmmc-supply = <&vcc18_flash>; |
| 88 | pinctrl-names = "default"; |
| 89 | pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_bus8>; |
| 90 | }; |
| 91 | |
| 92 | &gmac { |
| 93 | status = "okay"; |
| 94 | phy-supply = <&vcc_lan>; |
| 95 | phy-mode = "rgmii"; |
| 96 | clock_in_out = "input"; |
| 97 | assigned-clocks = <&cru SCLK_MAC>; |
| 98 | assigned-clock-parents = <&ext_gmac>; |
| 99 | pinctrl-names = "default"; |
| 100 | pinctrl-0 = <&rgmii_pins>; |
| 101 | tx_delay = <0x30>; |
| 102 | rx_delay = <0x10>; |
| 103 | }; |
| 104 | |
| 105 | &i2c0 { |
| 106 | status = "okay"; |
| 107 | |
| 108 | rk808: pmic@1b { |
| 109 | compatible = "rockchip,rk808"; |
| 110 | reg = <0x1b>; |
| 111 | pinctrl-names = "default"; |
| 112 | pinctrl-0 = <&pmic_int>, <&pmic_sleep>; |
| 113 | interrupt-parent = <&gpio0>; |
| 114 | interrupts = <5 IRQ_TYPE_LEVEL_LOW>; |
| 115 | rockchip,system-power-controller; |
| 116 | vcc1-supply = <&vcc_sys>; |
| 117 | vcc2-supply = <&vcc_sys>; |
| 118 | vcc3-supply = <&vcc_sys>; |
| 119 | vcc4-supply = <&vcc_sys>; |
| 120 | vcc6-supply = <&vcc_sys>; |
| 121 | vcc7-supply = <&vcc_sys>; |
| 122 | vcc8-supply = <&vcc_io>; |
| 123 | vcc9-supply = <&vcc_sys>; |
| 124 | vcc10-supply = <&vcc_sys>; |
| 125 | vcc11-supply = <&vcc_sys>; |
| 126 | vcc12-supply = <&vcc_io>; |
| 127 | clock-output-names = "xin32k", "rk808-clkout2"; |
| 128 | #clock-cells = <1>; |
| 129 | |
| 130 | regulators { |
| 131 | vdd_cpu: DCDC_REG1 { |
| 132 | regulator-always-on; |
| 133 | regulator-boot-on; |
| 134 | regulator-min-microvolt = <700000>; |
| 135 | regulator-max-microvolt = <1500000>; |
| 136 | regulator-name = "vdd_cpu"; |
| 137 | }; |
| 138 | |
| 139 | vdd_log: DCDC_REG2 { |
| 140 | regulator-always-on; |
| 141 | regulator-boot-on; |
| 142 | regulator-min-microvolt = <700000>; |
| 143 | regulator-max-microvolt = <1500000>; |
| 144 | regulator-name = "vdd_log"; |
| 145 | }; |
| 146 | |
| 147 | vcc_ddr: DCDC_REG3 { |
| 148 | regulator-always-on; |
| 149 | regulator-boot-on; |
| 150 | regulator-name = "vcc_ddr"; |
| 151 | }; |
| 152 | |
| 153 | vcc_io: DCDC_REG4 { |
| 154 | regulator-always-on; |
| 155 | regulator-boot-on; |
| 156 | regulator-min-microvolt = <3300000>; |
| 157 | regulator-max-microvolt = <3300000>; |
| 158 | regulator-name = "vcc_io"; |
| 159 | }; |
| 160 | |
| 161 | vcc18_flash: LDO_REG1 { |
| 162 | regulator-always-on; |
| 163 | regulator-boot-on; |
| 164 | regulator-min-microvolt = <1800000>; |
| 165 | regulator-max-microvolt = <1800000>; |
| 166 | regulator-name = "vcc18_flash"; |
| 167 | }; |
| 168 | |
| 169 | vcc33_lcd: LDO_REG2 { |
| 170 | regulator-always-on; |
| 171 | regulator-boot-on; |
| 172 | regulator-min-microvolt = <3300000>; |
| 173 | regulator-max-microvolt = <3300000>; |
| 174 | regulator-name = "vcc33_lcd"; |
| 175 | }; |
| 176 | |
| 177 | vdd_10: LDO_REG3 { |
| 178 | regulator-always-on; |
| 179 | regulator-boot-on; |
| 180 | regulator-min-microvolt = <1000000>; |
| 181 | regulator-max-microvolt = <1000000>; |
| 182 | regulator-name = "vdd_10"; |
| 183 | }; |
| 184 | |
| 185 | vcca_18: LDO_REG4 { |
| 186 | regulator-boot-on; |
| 187 | regulator-min-microvolt = <1800000>; |
| 188 | regulator-max-microvolt = <1800000>; |
| 189 | regulator-name = "vcca_18"; |
| 190 | }; |
| 191 | |
| 192 | vccio_sd: LDO_REG5 { |
| 193 | regulator-always-on; |
| 194 | regulator-boot-on; |
| 195 | regulator-min-microvolt = <1800000>; |
| 196 | regulator-max-microvolt = <3300000>; |
| 197 | regulator-name = "vccio_sd"; |
| 198 | }; |
| 199 | |
| 200 | vdd10_lcd: LDO_REG6 { |
| 201 | regulator-always-on; |
| 202 | regulator-boot-on; |
| 203 | regulator-min-microvolt = <1000000>; |
| 204 | regulator-max-microvolt = <1000000>; |
| 205 | regulator-name = "vdd10_lcd"; |
| 206 | }; |
| 207 | |
| 208 | vcc_18: LDO_REG7 { |
| 209 | regulator-always-on; |
| 210 | regulator-boot-on; |
| 211 | regulator-min-microvolt = <1800000>; |
| 212 | regulator-max-microvolt = <1800000>; |
| 213 | regulator-name = "vcc_18"; |
| 214 | }; |
| 215 | |
| 216 | vcc18_lcd: LDO_REG8 { |
| 217 | regulator-always-on; |
| 218 | regulator-boot-on; |
| 219 | regulator-min-microvolt = <1800000>; |
| 220 | regulator-max-microvolt = <1800000>; |
| 221 | regulator-name = "vcc18_lcd"; |
| 222 | }; |
| 223 | |
| 224 | vcc_sd: SWITCH_REG1 { |
| 225 | regulator-always-on; |
| 226 | regulator-boot-on; |
| 227 | regulator-name = "vcc_sd"; |
| 228 | }; |
| 229 | |
| 230 | vcc_lan: SWITCH_REG2 { |
| 231 | regulator-always-on; |
| 232 | regulator-boot-on; |
| 233 | regulator-name = "vcc_lan"; |
| 234 | }; |
| 235 | }; |
| 236 | }; |
| 237 | }; |
| 238 | |
| 239 | &pinctrl { |
| 240 | ir { |
| 241 | ir_int: ir-int { |
| 242 | rockchip,pins = <3 30 RK_FUNC_GPIO &pcfg_pull_none>; |
| 243 | }; |
| 244 | }; |
| 245 | |
| 246 | keys { |
| 247 | pwr_key: pwr-key { |
| 248 | rockchip,pins = <0 2 RK_FUNC_GPIO &pcfg_pull_none>; |
| 249 | }; |
| 250 | }; |
| 251 | |
| 252 | pmic { |
| 253 | pmic_sleep: pmic-sleep { |
| 254 | rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; |
| 255 | }; |
| 256 | |
| 257 | pmic_int: pmic-int { |
| 258 | rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; |
| 259 | }; |
| 260 | }; |
| 261 | }; |
| 262 | |
David Wu | 6333a3b | 2017-09-20 14:46:19 +0800 | [diff] [blame] | 263 | &saradc { |
| 264 | status = "okay"; |
| 265 | }; |
| 266 | |
Andy Yan | e2901ab | 2017-05-15 17:53:50 +0800 | [diff] [blame] | 267 | &tsadc { |
| 268 | status = "okay"; |
| 269 | rockchip,hw-tshut-mode = <0>; /* CRU */ |
| 270 | rockchip,hw-tshut-polarity = <1>; /* high */ |
| 271 | }; |
| 272 | |
| 273 | &uart4 { |
| 274 | status = "okay"; |
| 275 | }; |
| 276 | |
| 277 | &usb_host0_ehci { |
| 278 | status = "okay"; |
| 279 | }; |
| 280 | |
| 281 | &usb_otg { |
| 282 | status = "okay"; |
| 283 | }; |
| 284 | |
| 285 | &wdt { |
| 286 | status = "okay"; |
| 287 | }; |