blob: 84b8174bda1fcb9848e97477912f0e38847a3f90 [file] [log] [blame]
wdenk03f5c552004-10-10 21:21:55 +00001/*
Kumar Gala7c57f3e2011-01-11 00:52:35 -06002 * Copyright 2004, 2011 Freescale Semiconductor.
wdenk03f5c552004-10-10 21:21:55 +00003 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02004 * SPDX-License-Identifier: GPL-2.0+
wdenk03f5c552004-10-10 21:21:55 +00005 */
6
7/*
8 * mpc8555cds board configuration file
9 *
10 * Please refer to doc/README.mpc85xxcds for more info.
11 *
12 */
wdenk03f5c552004-10-10 21:21:55 +000013#ifndef __CONFIG_H
14#define __CONFIG_H
15
York Sun9ae14ca2015-08-18 12:35:52 -070016#define CONFIG_DISPLAY_BOARDINFO
17
wdenk03f5c552004-10-10 21:21:55 +000018/* High Level Configuration Options */
19#define CONFIG_BOOKE 1 /* BOOKE */
20#define CONFIG_E500 1 /* BOOKE e500 family */
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -050021#define CONFIG_CPM2 1 /* has CPM2 */
wdenk03f5c552004-10-10 21:21:55 +000022#define CONFIG_MPC8555 1 /* MPC8555 specific */
23#define CONFIG_MPC8555CDS 1 /* MPC8555CDS board specific */
24
Wolfgang Denk2ae18242010-10-06 09:05:45 +020025#define CONFIG_SYS_TEXT_BASE 0xfff80000
26
wdenk03f5c552004-10-10 21:21:55 +000027#define CONFIG_PCI
Gabor Juhos842033e2013-05-30 07:06:12 +000028#define CONFIG_PCI_INDIRECT_BRIDGE
Kumar Gala0151cba2008-10-21 11:33:58 -050029#define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020030#define CONFIG_TSEC_ENET /* tsec ethernet support */
wdenk03f5c552004-10-10 21:21:55 +000031#define CONFIG_ENV_OVERWRITE
Kumar Gala2cfaa1a2008-01-16 01:45:10 -060032#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
wdenk03f5c552004-10-10 21:21:55 +000033
Jon Loeliger25eedb22008-03-19 15:02:07 -050034#define CONFIG_FSL_VIA
Timur Tabie8d18542008-07-18 16:52:23 +020035
Jon Loeliger25eedb22008-03-19 15:02:07 -050036
wdenk03f5c552004-10-10 21:21:55 +000037#ifndef __ASSEMBLY__
38extern unsigned long get_clock_freq(void);
39#endif
40#define CONFIG_SYS_CLK_FREQ get_clock_freq() /* sysclk for MPC85xx */
41
42/*
43 * These can be toggled for performance analysis, otherwise use default.
44 */
Wolfgang Denk53677ef2008-05-20 16:00:29 +020045#define CONFIG_L2_CACHE /* toggle L2 cache */
wdenk03f5c552004-10-10 21:21:55 +000046#define CONFIG_BTB /* toggle branch predition */
wdenk03f5c552004-10-10 21:21:55 +000047
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020048#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
49#define CONFIG_SYS_MEMTEST_END 0x00400000
wdenk03f5c552004-10-10 21:21:55 +000050
Timur Tabie46fedf2011-08-04 18:03:41 -050051#define CONFIG_SYS_CCSRBAR 0xe0000000
52#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
wdenk03f5c552004-10-10 21:21:55 +000053
Jon Loeliger2b40edb2008-03-18 11:12:42 -050054/* DDR Setup */
York Sun5614e712013-09-30 09:22:09 -070055#define CONFIG_SYS_FSL_DDR1
Jon Loeliger2b40edb2008-03-18 11:12:42 -050056#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
57#define CONFIG_DDR_SPD
58#undef CONFIG_FSL_DDR_INTERACTIVE
59
60#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
61
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020062#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
63#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
wdenk03f5c552004-10-10 21:21:55 +000064
Jon Loeliger2b40edb2008-03-18 11:12:42 -050065#define CONFIG_NUM_DDR_CONTROLLERS 1
66#define CONFIG_DIMM_SLOTS_PER_CTLR 1
67#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
wdenk03f5c552004-10-10 21:21:55 +000068
Jon Loeliger2b40edb2008-03-18 11:12:42 -050069/* I2C addresses of SPD EEPROMs */
70#define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */
71
72/* Make sure required options are set */
wdenk03f5c552004-10-10 21:21:55 +000073#ifndef CONFIG_SPD_EEPROM
74#error ("CONFIG_SPD_EEPROM is required by MPC85555CDS")
75#endif
76
Jon Loeliger7202d432005-07-25 11:13:26 -050077#undef CONFIG_CLOCKS_IN_MHZ
78
wdenk03f5c552004-10-10 21:21:55 +000079/*
Jon Loeliger7202d432005-07-25 11:13:26 -050080 * Local Bus Definitions
wdenk03f5c552004-10-10 21:21:55 +000081 */
Jon Loeliger7202d432005-07-25 11:13:26 -050082
83/*
84 * FLASH on the Local Bus
85 * Two banks, 8M each, using the CFI driver.
86 * Boot from BR0/OR0 bank at 0xff00_0000
87 * Alternate BR1/OR1 bank at 0xff80_0000
88 *
89 * BR0, BR1:
90 * Base address 0 = 0xff00_0000 = BR0[0:16] = 1111 1111 0000 0000 0
91 * Base address 1 = 0xff80_0000 = BR1[0:16] = 1111 1111 1000 0000 0
92 * Port Size = 16 bits = BRx[19:20] = 10
93 * Use GPCM = BRx[24:26] = 000
94 * Valid = BRx[31] = 1
95 *
96 * 0 4 8 12 16 20 24 28
97 * 1111 1111 1000 0000 0001 0000 0000 0001 = ff801001 BR0
98 * 1111 1111 0000 0000 0001 0000 0000 0001 = ff001001 BR1
99 *
100 * OR0, OR1:
101 * Addr Mask = 8M = ORx[0:16] = 1111 1111 1000 0000 0
102 * Reserved ORx[17:18] = 11, confusion here?
103 * CSNT = ORx[20] = 1
104 * ACS = half cycle delay = ORx[21:22] = 11
105 * SCY = 6 = ORx[24:27] = 0110
106 * TRLX = use relaxed timing = ORx[29] = 1
107 * EAD = use external address latch delay = OR[31] = 1
108 *
109 * 0 4 8 12 16 20 24 28
110 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 ORx
111 */
112
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200113#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH 8M */
wdenk03f5c552004-10-10 21:21:55 +0000114
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200115#define CONFIG_SYS_BR0_PRELIM 0xff801001
116#define CONFIG_SYS_BR1_PRELIM 0xff001001
wdenk03f5c552004-10-10 21:21:55 +0000117
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200118#define CONFIG_SYS_OR0_PRELIM 0xff806e65
119#define CONFIG_SYS_OR1_PRELIM 0xff806e65
wdenk03f5c552004-10-10 21:21:55 +0000120
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200121#define CONFIG_SYS_FLASH_BANKS_LIST {0xff800000, CONFIG_SYS_FLASH_BASE}
122#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */
123#define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */
124#undef CONFIG_SYS_FLASH_CHECKSUM
125#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
126#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
wdenk03f5c552004-10-10 21:21:55 +0000127
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200128#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
wdenk03f5c552004-10-10 21:21:55 +0000129
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200130#define CONFIG_FLASH_CFI_DRIVER
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200131#define CONFIG_SYS_FLASH_CFI
132#define CONFIG_SYS_FLASH_EMPTY_INFO
wdenk03f5c552004-10-10 21:21:55 +0000133
wdenk03f5c552004-10-10 21:21:55 +0000134
135/*
Jon Loeliger7202d432005-07-25 11:13:26 -0500136 * SDRAM on the Local Bus
wdenk03f5c552004-10-10 21:21:55 +0000137 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
139#define CONFIG_SYS_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
wdenk03f5c552004-10-10 21:21:55 +0000140
141/*
142 * Base Register 2 and Option Register 2 configure SDRAM.
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143 * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000.
wdenk03f5c552004-10-10 21:21:55 +0000144 *
145 * For BR2, need:
146 * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
147 * port-size = 32-bits = BR2[19:20] = 11
148 * no parity checking = BR2[21:22] = 00
149 * SDRAM for MSEL = BR2[24:26] = 011
150 * Valid = BR[31] = 1
151 *
152 * 0 4 8 12 16 20 24 28
153 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
154 *
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155 * FIXME: CONFIG_SYS_LBC_SDRAM_BASE should be masked and OR'ed into
wdenk03f5c552004-10-10 21:21:55 +0000156 * FIXME: the top 17 bits of BR2.
157 */
158
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200159#define CONFIG_SYS_BR2_PRELIM 0xf0001861
wdenk03f5c552004-10-10 21:21:55 +0000160
161/*
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162 * The SDRAM size in MB, CONFIG_SYS_LBC_SDRAM_SIZE, is 64.
wdenk03f5c552004-10-10 21:21:55 +0000163 *
164 * For OR2, need:
165 * 64MB mask for AM, OR2[0:7] = 1111 1100
166 * XAM, OR2[17:18] = 11
167 * 9 columns OR2[19-21] = 010
168 * 13 rows OR2[23-25] = 100
169 * EAD set for extra time OR[31] = 1
170 *
171 * 0 4 8 12 16 20 24 28
172 * 1111 1100 0000 0000 0110 1001 0000 0001 = fc006901
173 */
174
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200175#define CONFIG_SYS_OR2_PRELIM 0xfc006901
wdenk03f5c552004-10-10 21:21:55 +0000176
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
178#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
179#define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
180#define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
wdenk03f5c552004-10-10 21:21:55 +0000181
182/*
wdenk03f5c552004-10-10 21:21:55 +0000183 * Common settings for all Local Bus SDRAM commands.
184 * At run time, either BSMA1516 (for CPU 1.1)
185 * or BSMA1617 (for CPU 1.0) (old)
186 * is OR'ed in too.
187 */
Kumar Galab0fe93ed2009-03-26 01:34:38 -0500188#define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \
189 | LSDMR_PRETOACT7 \
190 | LSDMR_ACTTORW7 \
191 | LSDMR_BL8 \
192 | LSDMR_WRC4 \
193 | LSDMR_CL3 \
194 | LSDMR_RFEN \
wdenk03f5c552004-10-10 21:21:55 +0000195 )
196
197/*
198 * The CADMUS registers are connected to CS3 on CDS.
199 * The new memory map places CADMUS at 0xf8000000.
200 *
201 * For BR3, need:
202 * Base address of 0xf8000000 = BR[0:16] = 1111 1000 0000 0000 0
203 * port-size = 8-bits = BR[19:20] = 01
204 * no parity checking = BR[21:22] = 00
205 * GPMC for MSEL = BR[24:26] = 000
206 * Valid = BR[31] = 1
207 *
208 * 0 4 8 12 16 20 24 28
209 * 1111 1000 0000 0000 0000 1000 0000 0001 = f8000801
210 *
211 * For OR3, need:
212 * 1 MB mask for AM, OR[0:16] = 1111 1111 1111 0000 0
213 * disable buffer ctrl OR[19] = 0
214 * CSNT OR[20] = 1
215 * ACS OR[21:22] = 11
216 * XACS OR[23] = 1
217 * SCY 15 wait states OR[24:27] = 1111 max is suboptimal but safe
218 * SETA OR[28] = 0
219 * TRLX OR[29] = 1
220 * EHTR OR[30] = 1
221 * EAD extra time OR[31] = 1
222 *
223 * 0 4 8 12 16 20 24 28
224 * 1111 1111 1111 0000 0000 1111 1111 0111 = fff00ff7
225 */
226
Jon Loeliger25eedb22008-03-19 15:02:07 -0500227#define CONFIG_FSL_CADMUS
228
wdenk03f5c552004-10-10 21:21:55 +0000229#define CADMUS_BASE_ADDR 0xf8000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200230#define CONFIG_SYS_BR3_PRELIM 0xf8000801
231#define CONFIG_SYS_OR3_PRELIM 0xfff00ff7
wdenk03f5c552004-10-10 21:21:55 +0000232
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200233#define CONFIG_SYS_INIT_RAM_LOCK 1
234#define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
Wolfgang Denk553f0982010-10-26 13:32:32 +0200235#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
wdenk03f5c552004-10-10 21:21:55 +0000236
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200237#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenk03f5c552004-10-10 21:21:55 +0000239
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200240#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
241#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
wdenk03f5c552004-10-10 21:21:55 +0000242
243/* Serial Port */
244#define CONFIG_CONS_INDEX 2
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200245#define CONFIG_SYS_NS16550_SERIAL
246#define CONFIG_SYS_NS16550_REG_SIZE 1
247#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
wdenk03f5c552004-10-10 21:21:55 +0000248
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200249#define CONFIG_SYS_BAUDRATE_TABLE \
wdenk03f5c552004-10-10 21:21:55 +0000250 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
251
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200252#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
253#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
wdenk03f5c552004-10-10 21:21:55 +0000254
255/* Use the HUSH parser */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200256#define CONFIG_SYS_HUSH_PARSER
257#ifdef CONFIG_SYS_HUSH_PARSER
wdenk03f5c552004-10-10 21:21:55 +0000258#endif
259
Matthew McClintock0e163872006-06-28 10:43:36 -0500260/* pass open firmware flat tree */
Kumar Galab90d2542007-11-29 00:11:44 -0600261#define CONFIG_OF_LIBFDT 1
262#define CONFIG_OF_BOARD_SETUP 1
263#define CONFIG_OF_STDOUT_VIA_ALIAS 1
Matthew McClintock0e163872006-06-28 10:43:36 -0500264
Jon Loeliger20476722006-10-20 15:50:15 -0500265/*
266 * I2C
267 */
Heiko Schocher00f792e2012-10-24 13:48:22 +0200268#define CONFIG_SYS_I2C
269#define CONFIG_SYS_I2C_FSL
270#define CONFIG_SYS_FSL_I2C_SPEED 400000
271#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
272#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
273#define CONFIG_SYS_I2C_NOPROBES { {0, 0x69} }
wdenk03f5c552004-10-10 21:21:55 +0000274
Timur Tabie8d18542008-07-18 16:52:23 +0200275/* EEPROM */
276#define CONFIG_ID_EEPROM
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277#define CONFIG_SYS_I2C_EEPROM_CCID
278#define CONFIG_SYS_ID_EEPROM
279#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57
280#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
Timur Tabie8d18542008-07-18 16:52:23 +0200281
wdenk03f5c552004-10-10 21:21:55 +0000282/*
283 * General PCI
284 * Addresses are mapped 1-1.
285 */
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600286#define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000
Kumar Gala10795f42008-12-02 16:08:36 -0600287#define CONFIG_SYS_PCI1_MEM_BUS 0x80000000
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600288#define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200289#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
Kumar Galaaca5f012008-12-02 16:08:40 -0600290#define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000
Kumar Gala5f91ef62008-12-02 16:08:37 -0600291#define CONFIG_SYS_PCI1_IO_BUS 0x00000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200292#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
293#define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */
wdenk03f5c552004-10-10 21:21:55 +0000294
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600295#define CONFIG_SYS_PCI2_MEM_VIRT 0xa0000000
Kumar Gala10795f42008-12-02 16:08:36 -0600296#define CONFIG_SYS_PCI2_MEM_BUS 0xa0000000
Kumar Gala5af0fdd2008-12-02 16:08:39 -0600297#define CONFIG_SYS_PCI2_MEM_PHYS 0xa0000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200298#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
Kumar Galaaca5f012008-12-02 16:08:40 -0600299#define CONFIG_SYS_PCI2_IO_VIRT 0xe2100000
Kumar Gala5f91ef62008-12-02 16:08:37 -0600300#define CONFIG_SYS_PCI2_IO_BUS 0x00000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200301#define CONFIG_SYS_PCI2_IO_PHYS 0xe2100000
302#define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */
wdenk03f5c552004-10-10 21:21:55 +0000303
Randy Vinson7f3f2bd2007-02-27 19:42:22 -0700304#ifdef CONFIG_LEGACY
305#define BRIDGE_ID 17
306#define VIA_ID 2
307#else
308#define BRIDGE_ID 28
309#define VIA_ID 4
310#endif
wdenk03f5c552004-10-10 21:21:55 +0000311
312#if defined(CONFIG_PCI)
313
Wolfgang Denk53677ef2008-05-20 16:00:29 +0200314#define CONFIG_PCI_PNP /* do pci plug-and-play */
Matthew McClintockbf1dfff2006-06-28 10:46:13 -0500315#define CONFIG_MPC85XX_PCI2
wdenk03f5c552004-10-10 21:21:55 +0000316
317#undef CONFIG_EEPRO100
318#undef CONFIG_TULIP
319
Matthew McClintockbf1dfff2006-06-28 10:46:13 -0500320#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200321#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
wdenk03f5c552004-10-10 21:21:55 +0000322
323#endif /* CONFIG_PCI */
324
325
326#if defined(CONFIG_TSEC_ENET)
327
wdenk03f5c552004-10-10 21:21:55 +0000328#define CONFIG_MII 1 /* MII PHY management */
Kim Phillips255a35772007-05-16 16:52:19 -0500329#define CONFIG_TSEC1 1
330#define CONFIG_TSEC1_NAME "TSEC0"
331#define CONFIG_TSEC2 1
332#define CONFIG_TSEC2_NAME "TSEC1"
wdenk03f5c552004-10-10 21:21:55 +0000333#define TSEC1_PHY_ADDR 0
334#define TSEC2_PHY_ADDR 1
wdenk03f5c552004-10-10 21:21:55 +0000335#define TSEC1_PHYIDX 0
336#define TSEC2_PHYIDX 0
Andy Fleming3a790132007-08-15 20:03:25 -0500337#define TSEC1_FLAGS TSEC_GIGABIT
338#define TSEC2_FLAGS TSEC_GIGABIT
Jon Loeligerd9b94f22005-07-25 14:05:07 -0500339
340/* Options are: TSEC[0-1] */
341#define CONFIG_ETHPRIME "TSEC0"
wdenk03f5c552004-10-10 21:21:55 +0000342
343#endif /* CONFIG_TSEC_ENET */
344
wdenk03f5c552004-10-10 21:21:55 +0000345/*
346 * Environment
347 */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200348#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200349#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200350#define CONFIG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
351#define CONFIG_ENV_SIZE 0x2000
wdenk03f5c552004-10-10 21:21:55 +0000352
353#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200354#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
wdenk03f5c552004-10-10 21:21:55 +0000355
Jon Loeliger2835e512007-06-13 13:22:08 -0500356/*
Jon Loeliger659e2f62007-07-10 09:10:49 -0500357 * BOOTP options
358 */
359#define CONFIG_BOOTP_BOOTFILESIZE
360#define CONFIG_BOOTP_BOOTPATH
361#define CONFIG_BOOTP_GATEWAY
362#define CONFIG_BOOTP_HOSTNAME
363
364
365/*
Jon Loeliger2835e512007-06-13 13:22:08 -0500366 * Command line configuration.
367 */
Jon Loeliger2835e512007-06-13 13:22:08 -0500368#define CONFIG_CMD_PING
369#define CONFIG_CMD_I2C
370#define CONFIG_CMD_MII
Kumar Gala1c9aa762008-09-22 23:40:42 -0500371#define CONFIG_CMD_IRQ
Becky Bruce199e2622010-06-17 11:37:25 -0500372#define CONFIG_CMD_REGINFO
Jon Loeliger2835e512007-06-13 13:22:08 -0500373
wdenk03f5c552004-10-10 21:21:55 +0000374#if defined(CONFIG_PCI)
Jon Loeliger2835e512007-06-13 13:22:08 -0500375 #define CONFIG_CMD_PCI
wdenk03f5c552004-10-10 21:21:55 +0000376#endif
Jon Loeliger2835e512007-06-13 13:22:08 -0500377
wdenk03f5c552004-10-10 21:21:55 +0000378
379#undef CONFIG_WATCHDOG /* watchdog disabled */
380
381/*
382 * Miscellaneous configurable options
383 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200384#define CONFIG_SYS_LONGHELP /* undef to save memory */
Kim Phillips5be58f52010-07-14 19:47:18 -0500385#define CONFIG_CMDLINE_EDITING /* Command-line editing */
386#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200387#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
Jon Loeliger2835e512007-06-13 13:22:08 -0500388#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200389#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
wdenk03f5c552004-10-10 21:21:55 +0000390#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200391#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
wdenk03f5c552004-10-10 21:21:55 +0000392#endif
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200393#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
394#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
395#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
wdenk03f5c552004-10-10 21:21:55 +0000396
397/*
398 * For booting Linux, the board info and command line data
Kumar Galaa832ac42011-04-28 10:13:41 -0500399 * have to be in the first 64 MB of memory, since this is
wdenk03f5c552004-10-10 21:21:55 +0000400 * the maximum mapped by the Linux kernel during initialization.
401 */
Kumar Galaa832ac42011-04-28 10:13:41 -0500402#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/
403#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
wdenk03f5c552004-10-10 21:21:55 +0000404
Jon Loeliger2835e512007-06-13 13:22:08 -0500405#if defined(CONFIG_CMD_KGDB)
wdenk03f5c552004-10-10 21:21:55 +0000406#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
wdenk03f5c552004-10-10 21:21:55 +0000407#endif
408
wdenk03f5c552004-10-10 21:21:55 +0000409/*
410 * Environment Configuration
411 */
wdenk03f5c552004-10-10 21:21:55 +0000412#if defined(CONFIG_TSEC_ENET)
Andy Fleming10327dc2007-08-16 16:35:02 -0500413#define CONFIG_HAS_ETH0
wdenke2ffd592004-12-31 09:32:47 +0000414#define CONFIG_HAS_ETH1
wdenke2ffd592004-12-31 09:32:47 +0000415#define CONFIG_HAS_ETH2
wdenk03f5c552004-10-10 21:21:55 +0000416#endif
417
418#define CONFIG_IPADDR 192.168.1.253
419
420#define CONFIG_HOSTNAME unknown
Joe Hershberger8b3637c2011-10-13 13:03:47 +0000421#define CONFIG_ROOTPATH "/nfsroot"
Joe Hershbergerb3f44c22011-10-13 13:03:48 +0000422#define CONFIG_BOOTFILE "your.uImage"
wdenk03f5c552004-10-10 21:21:55 +0000423
424#define CONFIG_SERVERIP 192.168.1.1
425#define CONFIG_GATEWAYIP 192.168.1.1
426#define CONFIG_NETMASK 255.255.255.0
427
428#define CONFIG_LOADADDR 200000 /*default location for tftp and bootm*/
429
430#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
431#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
432
433#define CONFIG_BAUDRATE 115200
434
435#define CONFIG_EXTRA_ENV_SETTINGS \
436 "netdev=eth0\0" \
437 "consoledev=ttyS1\0" \
Andy Fleming8272dc22006-09-13 10:33:35 -0500438 "ramdiskaddr=600000\0" \
439 "ramdiskfile=your.ramdisk.u-boot\0" \
440 "fdtaddr=400000\0" \
441 "fdtfile=your.fdt.dtb\0"
wdenk03f5c552004-10-10 21:21:55 +0000442
443#define CONFIG_NFSBOOTCOMMAND \
444 "setenv bootargs root=/dev/nfs rw " \
445 "nfsroot=$serverip:$rootpath " \
446 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
447 "console=$consoledev,$baudrate $othbootargs;" \
448 "tftp $loadaddr $bootfile;" \
Andy Fleming8272dc22006-09-13 10:33:35 -0500449 "tftp $fdtaddr $fdtfile;" \
450 "bootm $loadaddr - $fdtaddr"
wdenk03f5c552004-10-10 21:21:55 +0000451
452#define CONFIG_RAMBOOTCOMMAND \
453 "setenv bootargs root=/dev/ram rw " \
454 "console=$consoledev,$baudrate $othbootargs;" \
455 "tftp $ramdiskaddr $ramdiskfile;" \
456 "tftp $loadaddr $bootfile;" \
457 "bootm $loadaddr $ramdiskaddr"
458
459#define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND
460
wdenk03f5c552004-10-10 21:21:55 +0000461#endif /* __CONFIG_H */