blob: ae4ce63f67fed1f212c160556cb44036f6e99813 [file] [log] [blame]
Sanjeev Premi39708842011-10-25 06:11:30 +00001/*
2 * Common configuration settings for the TI OMAP3 EVM board.
3 *
4 * Copyright (C) 2006-2011 Texas Instruments Incorporated - http://www.ti.com/
5 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02006 * SPDX-License-Identifier: GPL-2.0+
Sanjeev Premi39708842011-10-25 06:11:30 +00007 */
8
9#ifndef __OMAP3_EVM_COMMON_H
10#define __OMAP3_EVM_COMMON_H
11
12/*
13 * High level configuration options
14 */
15#define CONFIG_OMAP /* This is TI OMAP core */
16#define CONFIG_OMAP34XX /* belonging to 34XX family */
Marek Vasut308252a2012-07-21 05:02:23 +000017#define CONFIG_OMAP_GPIO
Lokesh Vutla806d2792013-07-30 11:36:30 +053018#define CONFIG_OMAP_COMMON
Sanjeev Premi39708842011-10-25 06:11:30 +000019
20#define CONFIG_SDRC /* The chip has SDRC controller */
21
22#define CONFIG_OMAP3_EVM /* This is a OMAP3 EVM */
Sanjeev Premi39708842011-10-25 06:11:30 +000023#define CONFIG_TWL4030_POWER /* with TWL4030 PMIC */
24
Sanjeev Premi39708842011-10-25 06:11:30 +000025/*
26 * Clock related definitions
27 */
28#define V_OSCK 26000000 /* Clock output from T2 */
29#define V_SCLK (V_OSCK >> 1)
30
31/*
32 * OMAP3 has 12 GP timers, they can be driven by the system clock
33 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
34 * This rate is divided by a local divisor.
35 */
36#define CONFIG_SYS_TIMERBASE OMAP34XX_GPT2
37#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
Sanjeev Premi39708842011-10-25 06:11:30 +000038
39/* Size of environment - 128KB */
40#define CONFIG_ENV_SIZE (128 << 10)
41
42/* Size of malloc pool */
43#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
44
45/*
Sanjeev Premi39708842011-10-25 06:11:30 +000046 * Physical Memory Map
47 * Note 1: CS1 may or may not be populated
48 * Note 2: SDRAM size is expected to be at least 32MB
49 */
50#define CONFIG_NR_DRAM_BANKS 2
51#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
Sanjeev Premi39708842011-10-25 06:11:30 +000052#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
53
Sanjeev Premi39708842011-10-25 06:11:30 +000054/* Limits for memtest */
55#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
56#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
57 0x01F00000) /* 31MB */
58
59/* Default load address */
60#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
61
62/* -----------------------------------------------------------------------------
63 * Hardware drivers
64 * -----------------------------------------------------------------------------
65 */
66
67/*
68 * NS16550 Configuration
69 */
70#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
71
72#define CONFIG_SYS_NS16550
73#define CONFIG_SYS_NS16550_SERIAL
74#define CONFIG_SYS_NS16550_REG_SIZE (-4)
75#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
76
77/*
78 * select serial console configuration
79 */
80#define CONFIG_CONS_INDEX 1
81#define CONFIG_SERIAL1 1 /* UART1 on OMAP3 EVM */
82#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
83#define CONFIG_BAUDRATE 115200
84#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
85 115200}
86
87/*
88 * I2C
89 */
Heiko Schocher6789e842013-10-22 11:03:18 +020090#define CONFIG_SYS_I2C
91#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
92#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
93#define CONFIG_SYS_I2C_OMAP34XX
Sanjeev Premi39708842011-10-25 06:11:30 +000094
95/*
96 * PISMO support
97 */
98#define PISMO1_NAND_SIZE GPMC_SIZE_128M
99#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
100
101/* Monitor at start of flash - Reserve 2 sectors */
102#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
103
104#define CONFIG_SYS_MONITOR_LEN (256 << 10)
105
106/* Start location & size of environment */
107#define ONENAND_ENV_OFFSET 0x260000
108#define SMNAND_ENV_OFFSET 0x260000
109
110#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
111
112/*
113 * NAND
114 */
115/* Physical address to access NAND */
116#define CONFIG_SYS_NAND_ADDR NAND_BASE
117
118/* Physical address to access NAND at CS0 */
119#define CONFIG_SYS_NAND_BASE NAND_BASE
120
121/* Max number of NAND devices */
122#define CONFIG_SYS_MAX_NAND_DEVICE 1
pekon guptab80a6602014-05-06 00:46:19 +0530123#define CONFIG_SYS_NAND_BUSWIDTH_16BIT 16
Sanjeev Premi39708842011-10-25 06:11:30 +0000124/* Timeout values (in ticks) */
125#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
126#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
127
128/* Flash banks JFFS2 should use */
129#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
130 CONFIG_SYS_MAX_NAND_DEVICE)
131
132#define CONFIG_SYS_JFFS2_MEM_NAND
133#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
134#define CONFIG_SYS_JFFS2_NUM_BANKS 1
135
136#define CONFIG_JFFS2_NAND
137/* nand device jffs2 lives on */
138#define CONFIG_JFFS2_DEV "nand0"
139/* Start of jffs2 partition */
140#define CONFIG_JFFS2_PART_OFFSET 0x680000
141/* Size of jffs2 partition */
142#define CONFIG_JFFS2_PART_SIZE 0xf980000
143
144/*
145 * USB
146 */
147#ifdef CONFIG_USB_OMAP3
148
149#ifdef CONFIG_MUSB_HCD
150#define CONFIG_CMD_USB
151
152#define CONFIG_USB_STORAGE
153#define CONGIG_CMD_STORAGE
154#define CONFIG_CMD_FAT
155
156#ifdef CONFIG_USB_KEYBOARD
157#define CONFIG_SYS_USB_EVENT_POLL
158#define CONFIG_PREBOOT "usb start"
159#endif /* CONFIG_USB_KEYBOARD */
160
161#endif /* CONFIG_MUSB_HCD */
162
163#ifdef CONFIG_MUSB_UDC
164/* USB device configuration */
165#define CONFIG_USB_DEVICE
166#define CONFIG_USB_TTY
167#define CONFIG_SYS_CONSOLE_IS_IN_ENV
168
169/* Change these to suit your needs */
170#define CONFIG_USBD_VENDORID 0x0451
171#define CONFIG_USBD_PRODUCTID 0x5678
172#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
173#define CONFIG_USBD_PRODUCT_NAME "EVM"
174#endif /* CONFIG_MUSB_UDC */
175
176#endif /* CONFIG_USB_OMAP3 */
177
178/* ----------------------------------------------------------------------------
179 * U-boot features
180 * ----------------------------------------------------------------------------
181 */
182#define CONFIG_SYS_PROMPT "OMAP3_EVM # "
Sanjeev Premi39708842011-10-25 06:11:30 +0000183#define CONFIG_SYS_MAXARGS 16 /* max args for a command */
184
185#define CONFIG_MISC_INIT_R
186
187#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
188#define CONFIG_SETUP_MEMORY_TAGS
189#define CONFIG_INITRD_TAG
190#define CONFIG_REVISION_TAG
191
192/* Size of Console IO buffer */
193#define CONFIG_SYS_CBSIZE 512
194
195/* Size of print buffer */
196#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
197 sizeof(CONFIG_SYS_PROMPT) + 16)
198
199/* Size of bootarg buffer */
200#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
201
202#define CONFIG_BOOTFILE "uImage"
203
204/*
205 * NAND / OneNAND
206 */
207#if defined(CONFIG_CMD_NAND)
208#define CONFIG_SYS_FLASH_BASE PISMO1_NAND_BASE
209
210#define CONFIG_NAND_OMAP_GPMC
Sanjeev Premi39708842011-10-25 06:11:30 +0000211#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
212#elif defined(CONFIG_CMD_ONENAND)
213#define CONFIG_SYS_FLASH_BASE PISMO1_ONEN_BASE
214#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
Sanjeev Premiedc633e2011-10-25 06:11:33 +0000215#endif
Sanjeev Premi39708842011-10-25 06:11:30 +0000216
Sanjeev Premiedc633e2011-10-25 06:11:33 +0000217#if !defined(CONFIG_ENV_IS_NOWHERE)
218#if defined(CONFIG_CMD_NAND)
219#define CONFIG_ENV_IS_IN_NAND
220#elif defined(CONFIG_CMD_ONENAND)
Sanjeev Premi39708842011-10-25 06:11:30 +0000221#define CONFIG_ENV_IS_IN_ONENAND
222#define CONFIG_ENV_OFFSET ONENAND_ENV_OFFSET
223#endif
Sanjeev Premiedc633e2011-10-25 06:11:33 +0000224#endif /* CONFIG_ENV_IS_NOWHERE */
Sanjeev Premi39708842011-10-25 06:11:30 +0000225
226#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
227
228#if defined(CONFIG_CMD_NET)
229
230/* Ethernet (SMSC9115 from SMSC9118 family) */
Sanjeev Premi39708842011-10-25 06:11:30 +0000231#define CONFIG_SMC911X
232#define CONFIG_SMC911X_32_BIT
233#define CONFIG_SMC911X_BASE 0x2C000000
234
235/* BOOTP fields */
236#define CONFIG_BOOTP_SUBNETMASK 0x00000001
237#define CONFIG_BOOTP_GATEWAY 0x00000002
238#define CONFIG_BOOTP_HOSTNAME 0x00000004
239#define CONFIG_BOOTP_BOOTPATH 0x00000010
240
241#endif /* CONFIG_CMD_NET */
242
243/* Support for relocation */
244#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
245#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
246#define CONFIG_SYS_INIT_RAM_SIZE 0x800
247#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
248 CONFIG_SYS_INIT_RAM_SIZE - \
249 GENERATED_GBL_DATA_SIZE)
250
251/* -----------------------------------------------------------------------------
252 * Board specific
253 * -----------------------------------------------------------------------------
254 */
255#define CONFIG_SYS_NO_FLASH
256
257/* Uncomment to define the board revision statically */
258/* #define CONFIG_STATIC_BOARD_REV OMAP3EVM_BOARD_GEN_2 */
259
Aneesh V8e408522011-11-21 23:38:59 +0000260#define CONFIG_SYS_CACHELINE_SIZE 64
261
Tom Rini673283f2011-11-18 12:48:09 +0000262/* Defines for SPL */
263#define CONFIG_SPL
Tom Rini47f7bca2012-08-13 12:03:19 -0700264#define CONFIG_SPL_FRAMEWORK
Tom Rini673283f2011-11-18 12:48:09 +0000265#define CONFIG_SPL_TEXT_BASE 0x40200800
Tom Rinie0820cc2012-05-08 07:29:31 +0000266#define CONFIG_SPL_MAX_SIZE (54 * 1024) /* 8 KB for stack */
Tom Rini673283f2011-11-18 12:48:09 +0000267#define CONFIG_SPL_STACK LOW_LEVEL_SRAM_STACK
268
269#define CONFIG_SPL_BSS_START_ADDR 0x80000000
270#define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
271
Tom Rini49175c42012-05-08 07:29:32 +0000272#define CONFIG_SPL_BOARD_INIT
Tom Rini673283f2011-11-18 12:48:09 +0000273#define CONFIG_SPL_LIBCOMMON_SUPPORT
274#define CONFIG_SPL_LIBDISK_SUPPORT
275#define CONFIG_SPL_I2C_SUPPORT
276#define CONFIG_SPL_LIBGENERIC_SUPPORT
277#define CONFIG_SPL_SERIAL_SUPPORT
278#define CONFIG_SPL_POWER_SUPPORT
279#define CONFIG_SPL_OMAP3_ID_NAND
280#define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds"
281
282/*
283 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
284 * 64 bytes before this address should be set aside for u-boot.img's
285 * header. That is 0x800FFFC0--0x80100000 should not be used for any
286 * other needs.
287 */
288#define CONFIG_SYS_TEXT_BASE 0x80100000
289#define CONFIG_SYS_SPL_MALLOC_START 0x80208000
290#define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
291
Sanjeev Premi39708842011-10-25 06:11:30 +0000292#endif /* __OMAP3_EVM_COMMON_H */