blob: c8dcb277f2a66244b158af6eb4e56f7df3cf8827 [file] [log] [blame]
Haikun.Wang@freescale.coma8919372015-03-24 22:03:58 +08001/*
2 * (C) Copyright 2000-2003
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * Copyright (C) 2004-2009, 2015 Freescale Semiconductor, Inc.
6 * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
7 * Chao Fu (B44548@freescale.com)
8 * Haikun Wang (B53464@freescale.com)
9 *
10 * SPDX-License-Identifier: GPL-2.0+
11 */
12#include <dm.h>
13#include <errno.h>
14#include <common.h>
15#include <spi.h>
16#include <malloc.h>
17#include <asm/io.h>
18#include <fdtdec.h>
19#ifndef CONFIG_M68K
20#include <asm/arch/clock.h>
21#endif
22#include <fsl_dspi.h>
23
24DECLARE_GLOBAL_DATA_PTR;
25
26/* fsl_dspi_platdata flags */
Jagan Teki29e6abd2015-10-23 01:37:18 +053027#define DSPI_FLAG_REGMAP_ENDIAN_BIG BIT(0)
Haikun.Wang@freescale.coma8919372015-03-24 22:03:58 +080028
29/* idle data value */
30#define DSPI_IDLE_VAL 0x0
31
32/* max chipselect signals number */
33#define FSL_DSPI_MAX_CHIPSELECT 6
34
35/* default SCK frequency, unit: HZ */
36#define FSL_DSPI_DEFAULT_SCK_FREQ 10000000
37
38/* tx/rx data wait timeout value, unit: us */
39#define DSPI_TXRX_WAIT_TIMEOUT 1000000
40
41/* CTAR register pre-configure value */
42#define DSPI_CTAR_DEFAULT_VALUE (DSPI_CTAR_TRSZ(7) | \
43 DSPI_CTAR_PCSSCK_1CLK | \
44 DSPI_CTAR_PASC(0) | \
45 DSPI_CTAR_PDT(0) | \
46 DSPI_CTAR_CSSCK(0) | \
47 DSPI_CTAR_ASC(0) | \
48 DSPI_CTAR_DT(0))
49
50/* CTAR register pre-configure mask */
51#define DSPI_CTAR_SET_MODE_MASK (DSPI_CTAR_TRSZ(15) | \
52 DSPI_CTAR_PCSSCK(3) | \
53 DSPI_CTAR_PASC(3) | \
54 DSPI_CTAR_PDT(3) | \
55 DSPI_CTAR_CSSCK(15) | \
56 DSPI_CTAR_ASC(15) | \
57 DSPI_CTAR_DT(15))
58
59/**
60 * struct fsl_dspi_platdata - platform data for Freescale DSPI
61 *
62 * @flags: Flags for DSPI DSPI_FLAG_...
63 * @speed_hz: Default SCK frequency
64 * @num_chipselect: Number of DSPI chipselect signals
65 * @regs_addr: Base address of DSPI registers
66 */
67struct fsl_dspi_platdata {
68 uint flags;
69 uint speed_hz;
70 uint num_chipselect;
71 fdt_addr_t regs_addr;
72};
73
74/**
75 * struct fsl_dspi_priv - private data for Freescale DSPI
76 *
77 * @flags: Flags for DSPI DSPI_FLAG_...
78 * @mode: SPI mode to use for slave device (see SPI mode flags)
79 * @mcr_val: MCR register configure value
80 * @bus_clk: DSPI input clk frequency
81 * @speed_hz: Default SCK frequency
82 * @charbit: How many bits in every transfer
83 * @num_chipselect: Number of DSPI chipselect signals
84 * @ctar_val: CTAR register configure value of per chipselect slave device
85 * @regs: Point to DSPI register structure for I/O access
86 */
87struct fsl_dspi_priv {
88 uint flags;
89 uint mode;
90 uint mcr_val;
91 uint bus_clk;
92 uint speed_hz;
93 uint charbit;
94 uint num_chipselect;
95 uint ctar_val[FSL_DSPI_MAX_CHIPSELECT];
96 struct dspi *regs;
97};
98
99#ifndef CONFIG_DM_SPI
100struct fsl_dspi {
101 struct spi_slave slave;
102 struct fsl_dspi_priv priv;
103};
104#endif
105
106__weak void cpu_dspi_port_conf(void)
107{
108}
109
110__weak int cpu_dspi_claim_bus(uint bus, uint cs)
111{
112 return 0;
113}
114
115__weak void cpu_dspi_release_bus(uint bus, uint cs)
116{
117}
118
119static uint dspi_read32(uint flags, uint *addr)
120{
121 return flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ?
122 in_be32(addr) : in_le32(addr);
123}
124
125static void dspi_write32(uint flags, uint *addr, uint val)
126{
127 flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ?
128 out_be32(addr, val) : out_le32(addr, val);
129}
130
131static void dspi_halt(struct fsl_dspi_priv *priv, u8 halt)
132{
133 uint mcr_val;
134
135 mcr_val = dspi_read32(priv->flags, &priv->regs->mcr);
136
137 if (halt)
138 mcr_val |= DSPI_MCR_HALT;
139 else
140 mcr_val &= ~DSPI_MCR_HALT;
141
142 dspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
143}
144
145static void fsl_dspi_init_mcr(struct fsl_dspi_priv *priv, uint cfg_val)
146{
147 /* halt DSPI module */
148 dspi_halt(priv, 1);
149
150 dspi_write32(priv->flags, &priv->regs->mcr, cfg_val);
151
152 /* resume module */
153 dspi_halt(priv, 0);
154
155 priv->mcr_val = cfg_val;
156}
157
158static void fsl_dspi_cfg_cs_active_state(struct fsl_dspi_priv *priv,
159 uint cs, uint state)
160{
161 uint mcr_val;
162
163 dspi_halt(priv, 1);
164
165 mcr_val = dspi_read32(priv->flags, &priv->regs->mcr);
166 if (state & SPI_CS_HIGH)
167 /* CSx inactive state is low */
168 mcr_val &= ~DSPI_MCR_PCSIS(cs);
169 else
170 /* CSx inactive state is high */
171 mcr_val |= DSPI_MCR_PCSIS(cs);
172 dspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
173
174 dspi_halt(priv, 0);
175}
176
177static int fsl_dspi_cfg_ctar_mode(struct fsl_dspi_priv *priv,
178 uint cs, uint mode)
179{
180 uint bus_setup;
181
182 bus_setup = dspi_read32(priv->flags, &priv->regs->ctar[0]);
183
184 bus_setup &= ~DSPI_CTAR_SET_MODE_MASK;
185 bus_setup |= priv->ctar_val[cs];
186 bus_setup &= ~(DSPI_CTAR_CPOL | DSPI_CTAR_CPHA | DSPI_CTAR_LSBFE);
187
188 if (mode & SPI_CPOL)
189 bus_setup |= DSPI_CTAR_CPOL;
190 if (mode & SPI_CPHA)
191 bus_setup |= DSPI_CTAR_CPHA;
192 if (mode & SPI_LSB_FIRST)
193 bus_setup |= DSPI_CTAR_LSBFE;
194
195 dspi_write32(priv->flags, &priv->regs->ctar[0], bus_setup);
196
197 priv->charbit =
198 ((dspi_read32(priv->flags, &priv->regs->ctar[0]) &
199 DSPI_CTAR_TRSZ(15)) == DSPI_CTAR_TRSZ(15)) ? 16 : 8;
200
201 return 0;
202}
203
204static void fsl_dspi_clr_fifo(struct fsl_dspi_priv *priv)
205{
206 uint mcr_val;
207
208 dspi_halt(priv, 1);
209 mcr_val = dspi_read32(priv->flags, &priv->regs->mcr);
210 /* flush RX and TX FIFO */
211 mcr_val |= (DSPI_MCR_CTXF | DSPI_MCR_CRXF);
212 dspi_write32(priv->flags, &priv->regs->mcr, mcr_val);
213 dspi_halt(priv, 0);
214}
215
216static void dspi_tx(struct fsl_dspi_priv *priv, u32 ctrl, u16 data)
217{
218 int timeout = DSPI_TXRX_WAIT_TIMEOUT;
219
220 /* wait for empty entries in TXFIFO or timeout */
221 while (DSPI_SR_TXCTR(dspi_read32(priv->flags, &priv->regs->sr)) >= 4 &&
222 timeout--)
223 udelay(1);
224
225 if (timeout >= 0)
226 dspi_write32(priv->flags, &priv->regs->tfr, (ctrl | data));
227 else
228 debug("dspi_tx: waiting timeout!\n");
229}
230
231static u16 dspi_rx(struct fsl_dspi_priv *priv)
232{
233 int timeout = DSPI_TXRX_WAIT_TIMEOUT;
234
235 /* wait for valid entries in RXFIFO or timeout */
236 while (DSPI_SR_RXCTR(dspi_read32(priv->flags, &priv->regs->sr)) == 0 &&
237 timeout--)
238 udelay(1);
239
240 if (timeout >= 0)
241 return (u16)DSPI_RFR_RXDATA(
242 dspi_read32(priv->flags, &priv->regs->rfr));
243 else {
244 debug("dspi_rx: waiting timeout!\n");
245 return (u16)(~0);
246 }
247}
248
249static int dspi_xfer(struct fsl_dspi_priv *priv, uint cs, unsigned int bitlen,
250 const void *dout, void *din, unsigned long flags)
251{
252 u16 *spi_rd16 = NULL, *spi_wr16 = NULL;
253 u8 *spi_rd = NULL, *spi_wr = NULL;
254 static u32 ctrl;
255 uint len = bitlen >> 3;
256
257 if (priv->charbit == 16) {
258 bitlen >>= 1;
259 spi_wr16 = (u16 *)dout;
260 spi_rd16 = (u16 *)din;
261 } else {
262 spi_wr = (u8 *)dout;
263 spi_rd = (u8 *)din;
264 }
265
266 if ((flags & SPI_XFER_BEGIN) == SPI_XFER_BEGIN)
267 ctrl |= DSPI_TFR_CONT;
268
269 ctrl = ctrl & DSPI_TFR_CONT;
270 ctrl = ctrl | DSPI_TFR_CTAS(0) | DSPI_TFR_PCS(cs);
271
272 if (len > 1) {
273 int tmp_len = len - 1;
274 while (tmp_len--) {
275 if (dout != NULL) {
276 if (priv->charbit == 16)
277 dspi_tx(priv, ctrl, *spi_wr16++);
278 else
279 dspi_tx(priv, ctrl, *spi_wr++);
280 dspi_rx(priv);
281 }
282
283 if (din != NULL) {
284 dspi_tx(priv, ctrl, DSPI_IDLE_VAL);
285 if (priv->charbit == 16)
286 *spi_rd16++ = dspi_rx(priv);
287 else
288 *spi_rd++ = dspi_rx(priv);
289 }
290 }
291
292 len = 1; /* remaining byte */
293 }
294
295 if ((flags & SPI_XFER_END) == SPI_XFER_END)
296 ctrl &= ~DSPI_TFR_CONT;
297
298 if (len) {
299 if (dout != NULL) {
300 if (priv->charbit == 16)
301 dspi_tx(priv, ctrl, *spi_wr16);
302 else
303 dspi_tx(priv, ctrl, *spi_wr);
304 dspi_rx(priv);
305 }
306
307 if (din != NULL) {
308 dspi_tx(priv, ctrl, DSPI_IDLE_VAL);
309 if (priv->charbit == 16)
310 *spi_rd16 = dspi_rx(priv);
311 else
312 *spi_rd = dspi_rx(priv);
313 }
314 } else {
315 /* dummy read */
316 dspi_tx(priv, ctrl, DSPI_IDLE_VAL);
317 dspi_rx(priv);
318 }
319
320 return 0;
321}
322
323/**
324 * Calculate the divide value between input clk frequency and expected SCK frequency
325 * Formula: SCK = (clkrate/pbr) x ((1+dbr)/br)
326 * Dbr: use default value 0
327 *
328 * @pbr: return Baud Rate Prescaler value
329 * @br: return Baud Rate Scaler value
330 * @speed_hz: expected SCK frequency
331 * @clkrate: input clk frequency
332 */
333static int fsl_dspi_hz_to_spi_baud(int *pbr, int *br,
334 int speed_hz, uint clkrate)
335{
336 /* Valid baud rate pre-scaler values */
337 int pbr_tbl[4] = {2, 3, 5, 7};
338 int brs[16] = {2, 4, 6, 8,
339 16, 32, 64, 128,
340 256, 512, 1024, 2048,
341 4096, 8192, 16384, 32768};
342 int temp, i = 0, j = 0;
343
344 temp = clkrate / speed_hz;
345
346 for (i = 0; i < ARRAY_SIZE(pbr_tbl); i++)
347 for (j = 0; j < ARRAY_SIZE(brs); j++) {
348 if (pbr_tbl[i] * brs[j] >= temp) {
349 *pbr = i;
350 *br = j;
351 return 0;
352 }
353 }
354
355 debug("Can not find valid baud rate,speed_hz is %d, ", speed_hz);
356 debug("clkrate is %d, we use the max prescaler value.\n", clkrate);
357
358 *pbr = ARRAY_SIZE(pbr_tbl) - 1;
359 *br = ARRAY_SIZE(brs) - 1;
360 return -EINVAL;
361}
362
363static int fsl_dspi_cfg_speed(struct fsl_dspi_priv *priv, uint speed)
364{
365 int ret;
366 uint bus_setup;
367 int best_i, best_j, bus_clk;
368
369 bus_clk = priv->bus_clk;
370
371 debug("DSPI set_speed: expected SCK speed %u, bus_clk %u.\n",
372 speed, bus_clk);
373
374 bus_setup = dspi_read32(priv->flags, &priv->regs->ctar[0]);
375 bus_setup &= ~(DSPI_CTAR_DBR | DSPI_CTAR_PBR(0x3) | DSPI_CTAR_BR(0xf));
376
377 ret = fsl_dspi_hz_to_spi_baud(&best_i, &best_j, speed, bus_clk);
378 if (ret) {
379 speed = priv->speed_hz;
380 debug("DSPI set_speed use default SCK rate %u.\n", speed);
381 fsl_dspi_hz_to_spi_baud(&best_i, &best_j, speed, bus_clk);
382 }
383
384 bus_setup |= (DSPI_CTAR_PBR(best_i) | DSPI_CTAR_BR(best_j));
385 dspi_write32(priv->flags, &priv->regs->ctar[0], bus_setup);
386
387 priv->speed_hz = speed;
388
389 return 0;
390}
391#ifndef CONFIG_DM_SPI
392void spi_init(void)
393{
394 /* Nothing to do */
395}
396
397void spi_init_f(void)
398{
399 /* Nothing to do */
400}
401
402void spi_init_r(void)
403{
404 /* Nothing to do */
405}
406
407int spi_cs_is_valid(unsigned int bus, unsigned int cs)
408{
409 if (((cs >= 0) && (cs < 8)) && ((bus >= 0) && (bus < 8)))
410 return 1;
411 else
412 return 0;
413}
414
415struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
416 unsigned int max_hz, unsigned int mode)
417{
418 struct fsl_dspi *dspi;
419 uint mcr_cfg_val;
420
421 dspi = spi_alloc_slave(struct fsl_dspi, bus, cs);
422 if (!dspi)
423 return NULL;
424
425 cpu_dspi_port_conf();
426
427#ifdef CONFIG_SYS_FSL_DSPI_BE
428 dspi->priv.flags |= DSPI_FLAG_REGMAP_ENDIAN_BIG;
429#endif
430
431 dspi->priv.regs = (struct dspi *)MMAP_DSPI;
432
433#ifdef CONFIG_M68K
434 dspi->priv.bus_clk = gd->bus_clk;
435#else
436 dspi->priv.bus_clk = mxc_get_clock(MXC_DSPI_CLK);
437#endif
438 dspi->priv.speed_hz = FSL_DSPI_DEFAULT_SCK_FREQ;
439
440 /* default: all CS signals inactive state is high */
441 mcr_cfg_val = DSPI_MCR_MSTR | DSPI_MCR_PCSIS_MASK |
442 DSPI_MCR_CRXF | DSPI_MCR_CTXF;
443 fsl_dspi_init_mcr(&dspi->priv, mcr_cfg_val);
444
445 for (i = 0; i < FSL_DSPI_MAX_CHIPSELECT; i++)
446 dspi->priv.ctar_val[i] = DSPI_CTAR_DEFAULT_VALUE;
447
448#ifdef CONFIG_SYS_DSPI_CTAR0
449 if (FSL_DSPI_MAX_CHIPSELECT > 0)
450 dspi->priv.ctar_val[0] = CONFIG_SYS_DSPI_CTAR0;
451#endif
452#ifdef CONFIG_SYS_DSPI_CTAR1
453 if (FSL_DSPI_MAX_CHIPSELECT > 1)
454 dspi->priv.ctar_val[1] = CONFIG_SYS_DSPI_CTAR1;
455#endif
456#ifdef CONFIG_SYS_DSPI_CTAR2
457 if (FSL_DSPI_MAX_CHIPSELECT > 2)
458 dspi->priv.ctar_val[2] = CONFIG_SYS_DSPI_CTAR2;
459#endif
460#ifdef CONFIG_SYS_DSPI_CTAR3
461 if (FSL_DSPI_MAX_CHIPSELECT > 3)
462 dspi->priv.ctar_val[3] = CONFIG_SYS_DSPI_CTAR3;
463#endif
464#ifdef CONFIG_SYS_DSPI_CTAR4
465 if (FSL_DSPI_MAX_CHIPSELECT > 4)
466 dspi->priv.ctar_val[4] = CONFIG_SYS_DSPI_CTAR4;
467#endif
468#ifdef CONFIG_SYS_DSPI_CTAR5
469 if (FSL_DSPI_MAX_CHIPSELECT > 5)
470 dspi->priv.ctar_val[5] = CONFIG_SYS_DSPI_CTAR5;
471#endif
472#ifdef CONFIG_SYS_DSPI_CTAR6
473 if (FSL_DSPI_MAX_CHIPSELECT > 6)
474 dspi->priv.ctar_val[6] = CONFIG_SYS_DSPI_CTAR6;
475#endif
476#ifdef CONFIG_SYS_DSPI_CTAR7
477 if (FSL_DSPI_MAX_CHIPSELECT > 7)
478 dspi->priv.ctar_val[7] = CONFIG_SYS_DSPI_CTAR7;
479#endif
480
481 fsl_dspi_cfg_speed(&dspi->priv, max_hz);
482
483 /* configure transfer mode */
484 fsl_dspi_cfg_ctar_mode(&dspi->priv, cs, mode);
485
486 /* configure active state of CSX */
487 fsl_dspi_cfg_cs_active_state(&dspi->priv, cs, mode);
488
489 return &dspi->slave;
490}
491
492void spi_free_slave(struct spi_slave *slave)
493{
494 free(slave);
495}
496
497int spi_claim_bus(struct spi_slave *slave)
498{
499 uint sr_val;
500 struct fsl_dspi *dspi = (struct fsl_dspi *)slave;
501
502 cpu_dspi_claim_bus(slave->bus, slave->cs);
503
504 fsl_dspi_clr_fifo(&dspi->priv);
505
506 /* check module TX and RX status */
507 sr_val = dspi_read32(dspi->priv.flags, &dspi->priv.regs->sr);
508 if ((sr_val & DSPI_SR_TXRXS) != DSPI_SR_TXRXS) {
509 debug("DSPI RX/TX not ready!\n");
510 return -EIO;
511 }
512
513 return 0;
514}
515
516void spi_release_bus(struct spi_slave *slave)
517{
518 struct fsl_dspi *dspi = (struct fsl_dspi *)slave;
519
520 dspi_halt(&dspi->priv, 1);
521 cpu_dspi_release_bus(slave->bus.slave->cs);
522}
523
524int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
525 void *din, unsigned long flags)
526{
527 struct fsl_dspi *dspi = (struct fsl_dspi *)slave;
528 return dspi_xfer(&dspi->priv, slave->cs, bitlen, dout, din, flags);
529}
530#else
531static int fsl_dspi_child_pre_probe(struct udevice *dev)
532{
533 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
534 struct fsl_dspi_priv *priv = dev_get_priv(dev->parent);
535
536 if (slave_plat->cs >= priv->num_chipselect) {
537 debug("DSPI invalid chipselect number %d(max %d)!\n",
538 slave_plat->cs, priv->num_chipselect - 1);
539 return -EINVAL;
540 }
541
542 priv->ctar_val[slave_plat->cs] = DSPI_CTAR_DEFAULT_VALUE;
543
544 debug("DSPI pre_probe slave device on CS %u, max_hz %u, mode 0x%x.\n",
545 slave_plat->cs, slave_plat->max_hz, slave_plat->mode);
546
547 return 0;
548}
549
550static int fsl_dspi_probe(struct udevice *bus)
551{
552 struct fsl_dspi_platdata *plat = dev_get_platdata(bus);
553 struct fsl_dspi_priv *priv = dev_get_priv(bus);
554 struct dm_spi_bus *dm_spi_bus;
555 uint mcr_cfg_val;
556
557 dm_spi_bus = bus->uclass_priv;
558
559 /* cpu speical pin muxing configure */
560 cpu_dspi_port_conf();
561
562 /* get input clk frequency */
563 priv->regs = (struct dspi *)plat->regs_addr;
564 priv->flags = plat->flags;
565#ifdef CONFIG_M68K
566 priv->bus_clk = gd->bus_clk;
567#else
568 priv->bus_clk = mxc_get_clock(MXC_DSPI_CLK);
569#endif
570 priv->num_chipselect = plat->num_chipselect;
571 priv->speed_hz = plat->speed_hz;
572 /* frame data length in bits, default 8bits */
573 priv->charbit = 8;
574
575 dm_spi_bus->max_hz = plat->speed_hz;
576
577 /* default: all CS signals inactive state is high */
578 mcr_cfg_val = DSPI_MCR_MSTR | DSPI_MCR_PCSIS_MASK |
579 DSPI_MCR_CRXF | DSPI_MCR_CTXF;
580 fsl_dspi_init_mcr(priv, mcr_cfg_val);
581
582 debug("%s probe done, bus-num %d.\n", bus->name, bus->seq);
583
584 return 0;
585}
586
587static int fsl_dspi_claim_bus(struct udevice *dev)
588{
589 uint sr_val;
590 struct fsl_dspi_priv *priv;
591 struct udevice *bus = dev->parent;
592 struct dm_spi_slave_platdata *slave_plat =
593 dev_get_parent_platdata(dev);
594
595 priv = dev_get_priv(bus);
596
597 /* processor special prepartion work */
598 cpu_dspi_claim_bus(bus->seq, slave_plat->cs);
599
600 /* configure transfer mode */
601 fsl_dspi_cfg_ctar_mode(priv, slave_plat->cs, priv->mode);
602
603 /* configure active state of CSX */
604 fsl_dspi_cfg_cs_active_state(priv, slave_plat->cs,
605 priv->mode);
606
607 fsl_dspi_clr_fifo(priv);
608
609 /* check module TX and RX status */
610 sr_val = dspi_read32(priv->flags, &priv->regs->sr);
611 if ((sr_val & DSPI_SR_TXRXS) != DSPI_SR_TXRXS) {
612 debug("DSPI RX/TX not ready!\n");
613 return -EIO;
614 }
615
616 return 0;
617}
618
619static int fsl_dspi_release_bus(struct udevice *dev)
620{
621 struct udevice *bus = dev->parent;
622 struct fsl_dspi_priv *priv = dev_get_priv(bus);
623 struct dm_spi_slave_platdata *slave_plat =
624 dev_get_parent_platdata(dev);
625
626 /* halt module */
627 dspi_halt(priv, 1);
628
629 /* processor special release work */
630 cpu_dspi_release_bus(bus->seq, slave_plat->cs);
631
632 return 0;
633}
634
635/**
636 * This function doesn't do anything except help with debugging
637 */
638static int fsl_dspi_bind(struct udevice *bus)
639{
640 debug("%s assigned req_seq %d.\n", bus->name, bus->req_seq);
641 return 0;
642}
643
644static int fsl_dspi_ofdata_to_platdata(struct udevice *bus)
645{
646 fdt_addr_t addr;
647 struct fsl_dspi_platdata *plat = bus->platdata;
648 const void *blob = gd->fdt_blob;
649 int node = bus->of_offset;
650
651 if (fdtdec_get_bool(blob, node, "big-endian"))
652 plat->flags |= DSPI_FLAG_REGMAP_ENDIAN_BIG;
653
654 plat->num_chipselect =
655 fdtdec_get_int(blob, node, "num-cs", FSL_DSPI_MAX_CHIPSELECT);
656
Simon Glass4e9838c2015-08-11 08:33:29 -0600657 addr = dev_get_addr(bus);
Haikun.Wang@freescale.coma8919372015-03-24 22:03:58 +0800658 if (addr == FDT_ADDR_T_NONE) {
659 debug("DSPI: Can't get base address or size\n");
660 return -ENOMEM;
661 }
662 plat->regs_addr = addr;
663
664 plat->speed_hz = fdtdec_get_int(blob,
665 node, "spi-max-frequency", FSL_DSPI_DEFAULT_SCK_FREQ);
666
York Sunfdb9f342015-08-03 12:02:05 -0700667 debug("DSPI: regs=%pa, max-frequency=%d, endianess=%s, num-cs=%d\n",
668 &plat->regs_addr, plat->speed_hz,
Haikun.Wang@freescale.coma8919372015-03-24 22:03:58 +0800669 plat->flags & DSPI_FLAG_REGMAP_ENDIAN_BIG ? "be" : "le",
670 plat->num_chipselect);
671
672 return 0;
673}
674
675static int fsl_dspi_xfer(struct udevice *dev, unsigned int bitlen,
676 const void *dout, void *din, unsigned long flags)
677{
678 struct fsl_dspi_priv *priv;
679 struct dm_spi_slave_platdata *slave_plat = dev_get_parent_platdata(dev);
680 struct udevice *bus;
681
682 bus = dev->parent;
683 priv = dev_get_priv(bus);
684
685 return dspi_xfer(priv, slave_plat->cs, bitlen, dout, din, flags);
686}
687
688static int fsl_dspi_set_speed(struct udevice *bus, uint speed)
689{
690 struct fsl_dspi_priv *priv = dev_get_priv(bus);
691
692 return fsl_dspi_cfg_speed(priv, speed);
693}
694
695static int fsl_dspi_set_mode(struct udevice *bus, uint mode)
696{
697 struct fsl_dspi_priv *priv = dev_get_priv(bus);
698
699 debug("DSPI set_mode: mode 0x%x.\n", mode);
700
701 /*
702 * We store some chipselect special configure value in priv->ctar_val,
703 * and we can't get the correct chipselect number here,
704 * so just store mode value.
705 * Do really configuration when claim_bus.
706 */
707 priv->mode = mode;
708
709 return 0;
710}
711
712static const struct dm_spi_ops fsl_dspi_ops = {
713 .claim_bus = fsl_dspi_claim_bus,
714 .release_bus = fsl_dspi_release_bus,
715 .xfer = fsl_dspi_xfer,
716 .set_speed = fsl_dspi_set_speed,
717 .set_mode = fsl_dspi_set_mode,
718};
719
720static const struct udevice_id fsl_dspi_ids[] = {
721 { .compatible = "fsl,vf610-dspi" },
722 { }
723};
724
725U_BOOT_DRIVER(fsl_dspi) = {
726 .name = "fsl_dspi",
727 .id = UCLASS_SPI,
728 .of_match = fsl_dspi_ids,
729 .ops = &fsl_dspi_ops,
730 .ofdata_to_platdata = fsl_dspi_ofdata_to_platdata,
731 .platdata_auto_alloc_size = sizeof(struct fsl_dspi_platdata),
732 .priv_auto_alloc_size = sizeof(struct fsl_dspi_priv),
733 .probe = fsl_dspi_probe,
734 .child_pre_probe = fsl_dspi_child_pre_probe,
735 .bind = fsl_dspi_bind,
736};
737#endif