blob: af3c755f96311a66657152313a745805daec462b [file] [log] [blame]
Lokesh Vutla5d754192018-08-27 15:55:24 +05301// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Texas Instruments' OMAP serial driver
4 *
5 * Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
6 * Lokesh Vutla <lokeshvutla@ti.com>
7 */
8
9#include <common.h>
10#include <debug_uart.h>
11#include <dm.h>
12#include <dt-structs.h>
13#include <ns16550.h>
14#include <serial.h>
15#include <clk.h>
16
17#ifndef CONFIG_SYS_NS16550_CLK
18#define CONFIG_SYS_NS16550_CLK 0
19#endif
20
21#ifdef CONFIG_DEBUG_UART_OMAP
22
23#include <debug_uart.h>
24
25static inline void _debug_uart_init(void)
26{
27 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
28 int baud_divisor;
29
30 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK,
31 CONFIG_BAUDRATE);
32 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER);
33 serial_dout(&com_port->mdr1, 0x7);
34 serial_dout(&com_port->mcr, UART_MCRVAL);
35 serial_dout(&com_port->fcr, UART_FCR_DEFVAL);
36
37 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL);
38 serial_dout(&com_port->dll, baud_divisor & 0xff);
39 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff);
40 serial_dout(&com_port->lcr, UART_LCRVAL);
41 serial_dout(&com_port->mdr1, 0x0);
42}
43
44static inline void _debug_uart_putc(int ch)
45{
46 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE;
47
48 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE))
49 ;
50 serial_dout(&com_port->thr, ch);
51}
52
53DEBUG_UART_FUNCS
54
55#endif
56
57#if CONFIG_IS_ENABLED(DM_SERIAL)
58
59#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
60static int omap_serial_ofdata_to_platdata(struct udevice *dev)
61{
62 struct ns16550_platdata *plat = dev->platdata;
63 fdt_addr_t addr;
64 struct clk clk;
65 int err;
66
67 /* try Processor Local Bus device first */
68 addr = dev_read_addr(dev);
69 if (addr == FDT_ADDR_T_NONE)
70 return -EINVAL;
71
72 plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE);
73
74 plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0);
75 plat->reg_shift = 2;
76
77 err = clk_get_by_index(dev, 0, &clk);
78 if (!err) {
79 err = clk_get_rate(&clk);
80 if (!IS_ERR_VALUE(err))
81 plat->clock = err;
82 } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
83 debug("omap serial failed to get clock\n");
84 return err;
85 }
86
87 if (!plat->clock)
88 plat->clock = dev_read_u32_default(dev, "clock-frequency",
89 CONFIG_SYS_NS16550_CLK);
90 if (!plat->clock) {
91 debug("omap serial clock not defined\n");
92 return -EINVAL;
93 }
94
95 plat->fcr = UART_FCR_DEFVAL;
96
97 return 0;
98}
99
100static const struct udevice_id omap_serial_ids[] = {
101 { .compatible = "ti,omap2-uart", },
102 { .compatible = "ti,omap3-uart", },
103 { .compatible = "ti,omap4-uart", },
104 { .compatible = "ti,am3352-uart", },
105 { .compatible = "ti,am4372-uart", },
106 { .compatible = "ti,dra742-uart", },
Lokesh Vutlac1523c62018-09-14 19:43:35 +0530107 { .compatible = "ti,am654-uart", },
Lokesh Vutla5d754192018-08-27 15:55:24 +0530108 {}
109};
110#endif /* OF_CONTROL && !OF_PLATDATA */
111
112#if CONFIG_IS_ENABLED(SERIAL_PRESENT)
113U_BOOT_DRIVER(omap_serial) = {
114 .name = "omap_serial",
115 .id = UCLASS_SERIAL,
116#if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA)
117 .of_match = omap_serial_ids,
118 .ofdata_to_platdata = omap_serial_ofdata_to_platdata,
119 .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
120#endif
121 .priv_auto_alloc_size = sizeof(struct NS16550),
122 .probe = ns16550_serial_probe,
123 .ops = &ns16550_serial_ops,
124 .flags = DM_FLAG_PRE_RELOC,
125};
126#endif
127#endif /* DM_SERIAL */