blob: 965b515f0e6f9d273af9b5b7b6c01f5350daae77 [file] [log] [blame]
wdenkc3c7f862004-06-09 14:47:54 +00001/*
2 * Copyright (C) 2004 Arabella Software Ltd.
3 * Yuli Barcohen <yuli@arabellasw.com>
4 *
5 * Support for Interphase iSPAN Communications Controllers
6 * (453x and others). Tested on 4532.
7 *
8 * Derived from iSPAN 4539 port (iphase4539) by
9 * Wolfgang Grandegger <wg@denx.de>
10 *
11 * See file CREDITS for list of people who contributed to this
12 * project.
13 *
14 * This program is free software; you can redistribute it and/or
15 * modify it under the terms of the GNU General Public License as
16 * published by the Free Software Foundation; either version 2 of
17 * the License, or (at your option) any later version.
18 *
19 * This program is distributed in the hope that it will be useful,
20 * but WITHOUT ANY WARRANTY; without even the implied warranty of
21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
22 * GNU General Public License for more details.
23 *
24 * You should have received a copy of the GNU General Public License
25 * along with this program; if not, write to the Free Software
26 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
27 * MA 02111-1307 USA
28 */
29#ifndef __CONFIG_H
30#define __CONFIG_H
31
32#define CONFIG_MPC8260 /* This is an MPC8260 CPU */
33#define CONFIG_ISPAN /* ...on one of Interphase iSPAN boards */
Jon Loeliger9c4c5ae2005-07-23 10:37:35 -050034#define CONFIG_CPM2 1 /* Has a CPM2 */
wdenkc3c7f862004-06-09 14:47:54 +000035
36/*-----------------------------------------------------------------------
37 * Select serial console configuration
38 *
39 * If either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
40 * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
41 * for SCC).
42 *
43 * If CONFIG_CONS_NONE is defined, then the serial console routines must be
44 * defined elsewhere (for example, on the cogent platform, there are serial
45 * ports on the motherboard which are used for the serial console - see
46 * cogent/cma101/serial.[ch]).
47 */
48#define CONFIG_CONS_ON_SMC /* Define if console on SMC */
49#undef CONFIG_CONS_ON_SCC /* Define if console on SCC */
50#undef CONFIG_CONS_NONE /* Define if console on something else */
51#define CONFIG_CONS_INDEX 1 /* Which serial channel for console */
52
53/*-----------------------------------------------------------------------
54 * Select Ethernet configuration
55 *
56 * If either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
57 * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
58 * for FCC).
59 *
60 * If CONFIG_ETHER_NONE is defined, then either the Ethernet routines must
Jon Loeliger639221c2007-07-09 17:15:49 -050061 * be defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
wdenkc3c7f862004-06-09 14:47:54 +000062 */
63#undef CONFIG_ETHER_ON_SCC /* Define if Ethernet on SCC */
64#define CONFIG_ETHER_ON_FCC /* Define if Ethernet on FCC */
65#undef CONFIG_ETHER_NONE /* Define if Ethernet on something else */
66#define CONFIG_ETHER_INDEX 3 /* Which channel for Ethernrt */
67
68#ifdef CONFIG_ETHER_ON_FCC
69
70#if CONFIG_ETHER_INDEX == 3
71
72#define CFG_PHY_ADDR 0
73#define CFG_CMXFCR_VALUE (CMXFCR_RF3CS_CLK14 | CMXFCR_TF3CS_CLK16)
74#define CFG_CMXFCR_MASK (CMXFCR_FC3 | CMXFCR_RF3CS_MSK | CMXFCR_TF3CS_MSK)
75
76#endif /* CONFIG_ETHER_INDEX == 3 */
77
78#define CFG_CPMFCR_RAMTYPE 0
79#define CFG_FCC_PSMR (FCC_PSMR_FDE | FCC_PSMR_LPB)
80
81#define CONFIG_MII /* MII PHY management */
82#define CONFIG_BITBANGMII /* Bit-bang MII PHY management */
83/*
84 * GPIO pins used for bit-banged MII communications
85 */
86#define MDIO_PORT 3 /* Port D */
87
88#define CFG_MDIO_PIN 0x00040000 /* PD13 */
89#define CFG_MDC_PIN 0x00080000 /* PD12 */
90
91#define MDIO_ACTIVE (iop->pdir |= CFG_MDIO_PIN)
92#define MDIO_TRISTATE (iop->pdir &= ~CFG_MDIO_PIN)
93#define MDIO_READ ((iop->pdat & CFG_MDIO_PIN) != 0)
94
95#define MDIO(bit) if(bit) iop->pdat |= CFG_MDIO_PIN; \
96 else iop->pdat &= ~CFG_MDIO_PIN
97
98#define MDC(bit) if(bit) iop->pdat |= CFG_MDC_PIN; \
99 else iop->pdat &= ~CFG_MDC_PIN
100
101#define MIIDELAY udelay(1)
102
103#endif /* CONFIG_ETHER_ON_FCC */
104
105#define CONFIG_8260_CLKIN 65536000 /* in Hz */
106#define CONFIG_BAUDRATE 38400
107
wdenkc3c7f862004-06-09 14:47:54 +0000108
Jon Loeliger348f2582007-07-08 13:46:18 -0500109/*
Jon Loeliger11799432007-07-10 09:02:57 -0500110 * BOOTP options
111 */
112#define CONFIG_BOOTP_BOOTFILESIZE
113#define CONFIG_BOOTP_BOOTPATH
114#define CONFIG_BOOTP_GATEWAY
115#define CONFIG_BOOTP_HOSTNAME
116
117
118/*
Jon Loeliger348f2582007-07-08 13:46:18 -0500119 * Command line configuration.
120 */
121#include <config_cmd_default.h>
122
123#define CONFIG_CMD_ASKENV
124#define CONFIG_CMD_DHCP
125#define CONFIG_CMD_IMMAP
126#define CONFIG_CMD_MII
127#define CONFIG_CMD_PING
128#define CONFIG_CMD_REGINFO
129
wdenkc3c7f862004-06-09 14:47:54 +0000130
131#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
132#define CONFIG_BOOTCOMMAND "bootm fe010000" /* autoboot command */
133#define CONFIG_BOOTARGS "root=/dev/ram rw"
134
135#define CONFIG_BZIP2 /* Include support for bzip2 compressed images */
136#undef CONFIG_WATCHDOG /* Disable platform specific watchdog */
137
138/*-----------------------------------------------------------------------
139 * Miscellaneous configurable options
140 */
141#define CFG_PROMPT "=> " /* Monitor Command Prompt */
142#define CFG_HUSH_PARSER
143#define CFG_PROMPT_HUSH_PS2 "> "
144#define CFG_LONGHELP /* #undef to save memory */
145#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
146#define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */
147#define CFG_MAXARGS 16 /* Max number of command args */
148#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
149
150#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
151#define CFG_MEMTEST_END 0x03B00000 /* 1 ... 59 MB in SDRAM */
152
153#define CFG_LOAD_ADDR 0x100000 /* Default load address */
154
155#define CFG_HZ 1000 /* Decrementer freq: 1 ms ticks */
156
157#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
158
159#define CFG_RESET_ADDRESS 0x09900000
160
161#define CONFIG_MISC_INIT_R /* We need misc_init_r() */
162
163/*-----------------------------------------------------------------------
164 * For booting Linux, the board info and command line data
165 * have to be in the first 8 MB of memory, since this is
166 * the maximum mapped by the Linux kernel during initialization.
167 */
168#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
169
170#define CFG_MONITOR_BASE TEXT_BASE
171#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
172#ifdef CONFIG_BZIP2
173#define CFG_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
174#else
175#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 KB for malloc() */
176#endif /* CONFIG_BZIP2 */
177
178/*-----------------------------------------------------------------------
179 * FLASH organization
180 */
181#define CFG_FLASH_BASE 0xFE000000
182#define CFG_FLASH_CFI /* The flash is CFI compatible */
183#define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */
184#define CFG_MAX_FLASH_BANKS 1 /* Max num of memory banks */
185#define CFG_MAX_FLASH_SECT 142 /* Max num of sects on one chip */
186
187/* Environment is in flash, there is little space left in Serial EEPROM */
188#define CFG_ENV_IS_IN_FLASH
189#define CFG_ENV_SECT_SIZE 0x10000 /* We use one complete sector */
wdenke2ffd592004-12-31 09:32:47 +0000190#define CFG_ENV_SIZE (CFG_ENV_SECT_SIZE)
wdenkc3c7f862004-06-09 14:47:54 +0000191#define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN)
192#define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
wdenke2ffd592004-12-31 09:32:47 +0000193#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
wdenkc3c7f862004-06-09 14:47:54 +0000194
195/*-----------------------------------------------------------------------
196 * Hard Reset Configuration Words
197 *
198 * If you change bits in the HRCW, you must also change the CFG_*
199 * defines for the various registers affected by the HRCW e.g. changing
200 * HRCW_DPPCxx requires you to also change CFG_SIUMCR.
201 */
202/* 0x1686B245 */
203#define CFG_HRCW_MASTER (HRCW_EBM | HRCW_BPS01 | HRCW_CIP |\
204 HRCW_L2CPC10 | HRCW_ISB110 |\
205 HRCW_BMS | HRCW_MMR11 | HRCW_APPC10 |\
206 HRCW_CS10PC01 | HRCW_MODCK_H0101 \
207 )
208/* No slaves */
209#define CFG_HRCW_SLAVE1 0
210#define CFG_HRCW_SLAVE2 0
211#define CFG_HRCW_SLAVE3 0
212#define CFG_HRCW_SLAVE4 0
213#define CFG_HRCW_SLAVE5 0
214#define CFG_HRCW_SLAVE6 0
215#define CFG_HRCW_SLAVE7 0
216
217/*-----------------------------------------------------------------------
218 * Internal Memory Mapped Register
219 */
220#define CFG_IMMR 0xF0F00000
221#ifdef CFG_REV_B
222#define CFG_DEFAULT_IMMR 0xFF000000
223#endif /* CFG_REV_B */
224/*-----------------------------------------------------------------------
225 * Definitions for initial stack pointer and data area (in DPRAM)
226 */
227#define CFG_INIT_RAM_ADDR CFG_IMMR
228#define CFG_INIT_RAM_END 0x4000 /* End of used area in DPRAM */
229#define CFG_GBL_DATA_SIZE 128 /* Size in bytes reserved for initial data */
230#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
231#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
232
233/*-----------------------------------------------------------------------
234 * Internal Definitions
235 *
236 * Boot Flags
237 */
238#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from flash */
239#define BOOTFLAG_WARM 0x02 /* Software reboot */
240
241/*-----------------------------------------------------------------------
242 * Cache Configuration
243 */
244#define CFG_CACHELINE_SIZE 32 /* For MPC8260 CPU */
245
246/*-----------------------------------------------------------------------
247 * HIDx - Hardware Implementation-dependent Registers 2-11
248 *-----------------------------------------------------------------------
249 * HID0 also contains cache control.
250 *
251 * HID1 has only read-only information - nothing to set.
252 */
253#define CFG_HID0_INIT (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
254 HID0_IFEM|HID0_ABE)
255#define CFG_HID0_FINAL (HID0_ICE|HID0_IFEM|HID0_ABE)
256#define CFG_HID2 0
257
258/*-----------------------------------------------------------------------
259 * RMR - Reset Mode Register 5-5
260 *-----------------------------------------------------------------------
261 * turn on Checkstop Reset Enable
262 */
263#define CFG_RMR RMR_CSRE
264
265/*-----------------------------------------------------------------------
266 * BCR - Bus Configuration 4-25
267 *-----------------------------------------------------------------------
268 */
269#define CFG_BCR 0xA01C0000
270
271/*-----------------------------------------------------------------------
272 * SIUMCR - SIU Module Configuration 4-31
273 *-----------------------------------------------------------------------
274 */
275#define CFG_SIUMCR 0x42250000/* 0x4205C000 */
276
277/*-----------------------------------------------------------------------
278 * SYPCR - System Protection Control 4-35
279 * SYPCR can only be written once after reset!
280 *-----------------------------------------------------------------------
281 * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
282 */
283#if defined (CONFIG_WATCHDOG)
284#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
285 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
286#else
287#define CFG_SYPCR (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
288 SYPCR_SWRI|SYPCR_SWP)
289#endif /* CONFIG_WATCHDOG */
290
291/*-----------------------------------------------------------------------
292 * TMCNTSC - Time Counter Status and Control 4-40
293 * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
294 * and enable Time Counter
295 *-----------------------------------------------------------------------
296 */
297#define CFG_TMCNTSC (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
298
299/*-----------------------------------------------------------------------
300 * PISCR - Periodic Interrupt Status and Control 4-42
301 *-----------------------------------------------------------------------
302 * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
303 * Periodic timer
304 */
305#define CFG_PISCR (PISCR_PS|PISCR_PTF|PISCR_PTE)
306
307/*-----------------------------------------------------------------------
308 * SCCR - System Clock Control 9-8
309 *-----------------------------------------------------------------------
310 * Ensure DFBRG is Divide by 16
311 */
312#define CFG_SCCR SCCR_DFBRG01
313
314/*-----------------------------------------------------------------------
315 * RCCR - RISC Controller Configuration 13-7
316 *-----------------------------------------------------------------------
317 */
318#define CFG_RCCR 0
319
320/*-----------------------------------------------------------------------
321 * Init Memory Controller:
322 *
323 * Bank Bus Machine PortSize Device
324 * ---- --- ------- ----------------------------- ------
325 * 0 60x GPCM 8 bit (Rev.B)/16 bit (Rev.D) Flash
326 * 1 60x SDRAM 64 bit SDRAM
327 * 2 Local SDRAM 32 bit SDRAM
328 */
329#define CFG_USE_FIRMWARE /* If defined - do not initialise memory
330 controller, rely on initialisation
331 performed by the Interphase boot firmware.
332 */
333
334#define CFG_OR0_PRELIM 0xFE000882
335#ifdef CFG_REV_B
336#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BRx_PS_8 | BRx_V)
337#else /* Rev. D */
338#define CFG_BR0_PRELIM (CFG_FLASH_BASE | BRx_PS_16 | BRx_V)
339#endif /* CFG_REV_B */
340
341#define CFG_MPTPR 0x7F00
342
343/* Please note that 60x SDRAM MUST start at 0 */
344#define CFG_SDRAM_BASE 0x00000000
345#define CFG_60x_BR 0x00000041
346#define CFG_60x_OR 0xF0002CD0
347#define CFG_PSDMR 0x0049929A
348#define CFG_PSRT 0x07
349
350#define CFG_LSDRAM_BASE 0xF7000000
351#define CFG_LOC_BR 0x00001861
352#define CFG_LOC_OR 0xFF803280
353#define CFG_LSDMR 0x8285A552
354#define CFG_LSRT 0x07
355
356#endif /* __CONFIG_H */