blob: e9fa153755d8a2c47c154125cb48c16cafdb9e29 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001# SPDX-License-Identifier: GPL-2.0+
Stefan Roese82ceba22016-03-16 08:48:21 +01002#
3# Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
Stefan Roese82ceba22016-03-16 08:48:21 +01004
5if VENDOR_CONGATEC
6
7choice
8 prompt "Mainboard model"
9 optional
10
11config TARGET_CONGA_QEVAL20_QA3_E3845
12 bool "congatec QEVAL 2.0 & conga-QA3/E3845"
Tom Rinie5ec4812017-01-22 19:43:11 -050013 select BOARD_LATE_INIT
Simon Glassfedb4282017-06-14 21:28:21 -060014 imply SCSI
Stefan Roese82ceba22016-03-16 08:48:21 +010015 help
16 This is the congatec Qseven 2.0 evaluation carrier board
17 (conga-QEVAL) equipped with the conga-QA3/E3845-4G SoM.
18 It contains an Atom E3845 with Ethernet, micro-SD, USB 2,
19 USB 3, SATA, serial console and HDMI 1.3 video out.
20 It requires some binary blobs - see README.x86 for details.
21
22 Note that PCIE_ECAM_BASE is set up by the FSP so the value used
23 by U-Boot matches that value.
24
Stefan Roese14a937f2017-08-08 11:52:13 +020025config TARGET_THEADORABLE_X86_CONGA_QA3_E3845
26 bool "theadorable-x86 baseboard & conga-QA3/E3845"
27 help
28 This is the theadorable-x86 baseboard board equipped with the
29 conga-QA3/E3845-4G SoM. It contains an Atom E3845 with Ethernet,
30 micro-SD, USB 2, USB 3, SATA, serial console and HDMI 1.3 video
31 out. It requires some binary blobs - see README.x86 for details.
32
33 Note that PCIE_ECAM_BASE is set up by the FSP so the value used
34 by U-Boot matches that value.
35
Stefan Roese82ceba22016-03-16 08:48:21 +010036endchoice
37
38source "board/congatec/conga-qeval20-qa3-e3845/Kconfig"
39
40endif