blob: 746624d7999387238df5278872fa303637777b4a [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
wdenka6840a62001-04-09 21:43:07 +00002/*
3 * (C) Copyright 2001
4 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
wdenka6840a62001-04-09 21:43:07 +00005 */
6
7/*
8 * Generic RTC interface.
9 */
10#ifndef _RTC_H_
11#define _RTC_H_
12
Albin Tonnerre885fc782009-08-13 15:31:12 +020013/* bcd<->bin functions are needed by almost all the RTC drivers, let's include
14 * it there instead of in evey single driver */
15
16#include <bcd.h>
Simon Glassaac51192015-04-20 12:37:21 -060017#include <rtc_def.h>
wdenka6840a62001-04-09 21:43:07 +000018
Simon Glassdbeda5b2015-04-20 12:37:23 -060019#ifdef CONFIG_DM_RTC
20
21struct rtc_ops {
22 /**
23 * get() - get the current time
24 *
25 * Returns the current time read from the RTC device. The driver
26 * is responsible for setting up every field in the structure.
27 *
28 * @dev: Device to read from
29 * @time: Place to put the time that is read
30 */
31 int (*get)(struct udevice *dev, struct rtc_time *time);
32
33 /**
34 * set() - set the current time
35 *
36 * Sets the time in the RTC device. The driver can expect every
37 * field to be set correctly.
38 *
39 * @dev: Device to read from
40 * @time: Time to write
41 */
42 int (*set)(struct udevice *dev, const struct rtc_time *time);
43
44 /**
45 * reset() - reset the RTC to a known-good state
46 *
47 * This function resets the RTC to a known-good state. The time may
48 * be unset by this method, so should be set after this method is
49 * called.
50 *
51 * @dev: Device to read from
52 * @return 0 if OK, -ve on error
53 */
54 int (*reset)(struct udevice *dev);
55
56 /**
57 * read8() - Read an 8-bit register
58 *
59 * @dev: Device to read from
60 * @reg: Register to read
61 * @return value read, or -ve on error
62 */
63 int (*read8)(struct udevice *dev, unsigned int reg);
64
65 /**
66 * write8() - Write an 8-bit register
67 *
68 * @dev: Device to write to
69 * @reg: Register to write
70 * @value: Value to write
71 * @return 0 if OK, -ve on error
72 */
73 int (*write8)(struct udevice *dev, unsigned int reg, int val);
74};
75
76/* Access the operations for an RTC device */
77#define rtc_get_ops(dev) ((struct rtc_ops *)(dev)->driver->ops)
78
79/**
80 * dm_rtc_get() - Read the time from an RTC
81 *
82 * @dev: Device to read from
83 * @time: Place to put the current time
84 * @return 0 if OK, -ve on error
85 */
86int dm_rtc_get(struct udevice *dev, struct rtc_time *time);
87
88/**
89 * dm_rtc_put() - Write a time to an RTC
90 *
91 * @dev: Device to read from
92 * @time: Time to write into the RTC
93 * @return 0 if OK, -ve on error
94 */
95int dm_rtc_set(struct udevice *dev, struct rtc_time *time);
96
97/**
98 * dm_rtc_reset() - reset the RTC to a known-good state
99 *
100 * If the RTC appears to be broken (e.g. it is not counting up in seconds)
101 * it may need to be reset to a known good state. This function achieves this.
102 * After resetting the RTC the time should then be set to a known value by
103 * the caller.
104 *
105 * @dev: Device to read from
106 * @return 0 if OK, -ve on error
107 */
108int dm_rtc_reset(struct udevice *dev);
109
110/**
111 * rtc_read8() - Read an 8-bit register
112 *
113 * @dev: Device to read from
114 * @reg: Register to read
115 * @return value read, or -ve on error
116 */
117int rtc_read8(struct udevice *dev, unsigned int reg);
118
119/**
120 * rtc_write8() - Write an 8-bit register
121 *
122 * @dev: Device to write to
123 * @reg: Register to write
124 * @value: Value to write
125 * @return 0 if OK, -ve on error
126 */
127int rtc_write8(struct udevice *dev, unsigned int reg, int val);
128
129/**
Bin Mengd24c7fb2017-03-16 07:26:27 -0700130 * rtc_read16() - Read a 16-bit value from the RTC
131 *
132 * @dev: Device to read from
133 * @reg: Offset to start reading from
134 * @valuep: Place to put the value that is read
135 * @return 0 if OK, -ve on error
136 */
137int rtc_read16(struct udevice *dev, unsigned int reg, u16 *valuep);
138
139/**
140 * rtc_write16() - Write a 16-bit value to the RTC
141 *
142 * @dev: Device to write to
143 * @reg: Register to start writing to
144 * @value: Value to write
145 * @return 0 if OK, -ve on error
146 */
147int rtc_write16(struct udevice *dev, unsigned int reg, u16 value);
148
149/**
Simon Glassdbeda5b2015-04-20 12:37:23 -0600150 * rtc_read32() - Read a 32-bit value from the RTC
151 *
152 * @dev: Device to read from
153 * @reg: Offset to start reading from
154 * @valuep: Place to put the value that is read
155 * @return 0 if OK, -ve on error
156 */
157int rtc_read32(struct udevice *dev, unsigned int reg, u32 *valuep);
158
159/**
160 * rtc_write32() - Write a 32-bit value to the RTC
161 *
162 * @dev: Device to write to
163 * @reg: Register to start writing to
164 * @value: Value to write
165 * @return 0 if OK, -ve on error
166 */
167int rtc_write32(struct udevice *dev, unsigned int reg, u32 value);
168
169#else
Yuri Tikhonovb73a19e2008-03-20 17:56:04 +0300170int rtc_get (struct rtc_time *);
Jean-Christophe PLAGNIOL-VILLARDd1e23192008-09-01 23:06:23 +0200171int rtc_set (struct rtc_time *);
wdenka6840a62001-04-09 21:43:07 +0000172void rtc_reset (void);
Priyanka Jainc3409412015-06-29 15:39:23 +0530173void rtc_enable_32khz_output(void);
wdenka6840a62001-04-09 21:43:07 +0000174
Simon Glassc6577f72014-11-14 18:18:26 -0700175/**
Simon Glassfc4860c2015-01-19 22:16:10 -0700176 * rtc_read8() - Read an 8-bit register
177 *
178 * @reg: Register to read
179 * @return value read
180 */
181int rtc_read8(int reg);
182
183/**
184 * rtc_write8() - Write an 8-bit register
185 *
186 * @reg: Register to write
187 * @value: Value to write
188 */
189void rtc_write8(int reg, uchar val);
190
191/**
192 * rtc_read32() - Read a 32-bit value from the RTC
193 *
194 * @reg: Offset to start reading from
195 * @return value read
196 */
197u32 rtc_read32(int reg);
198
199/**
200 * rtc_write32() - Write a 32-bit value to the RTC
201 *
202 * @reg: Register to start writing to
203 * @value: Value to write
204 */
205void rtc_write32(int reg, u32 value);
206
207/**
Simon Glassc6577f72014-11-14 18:18:26 -0700208 * rtc_init() - Set up the real time clock ready for use
209 */
210void rtc_init(void);
Simon Glassdbeda5b2015-04-20 12:37:23 -0600211#endif
Simon Glassc6577f72014-11-14 18:18:26 -0700212
Simon Glass199e87c2015-04-20 12:37:17 -0600213/**
214 * rtc_calc_weekday() - Work out the weekday from a time
215 *
216 * This only works for the Gregorian calendar - i.e. after 1752 (in the UK).
217 * It sets time->tm_wdaay to the correct day of the week.
218 *
219 * @time: Time to inspect. tm_wday is updated
220 * @return 0 if OK, -EINVAL if the weekday could not be determined
221 */
222int rtc_calc_weekday(struct rtc_time *time);
223
Simon Glass9f9276c2015-04-20 12:37:18 -0600224/**
225 * rtc_to_tm() - Convert a time_t value into a broken-out time
226 *
227 * The following fields are set up by this function:
228 * tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year, tm_wday
229 *
230 * Note that tm_yday and tm_isdst are set to 0.
231 *
232 * @time_t: Number of seconds since 1970-01-01 00:00:00
233 * @time: Place to put the broken-out time
234 * @return 0 if OK, -EINVAL if the weekday could not be determined
235 */
236int rtc_to_tm(int time_t, struct rtc_time *time);
237
Simon Glass71420982015-04-20 12:37:19 -0600238/**
239 * rtc_mktime() - Convert a broken-out time into a time_t value
240 *
241 * The following fields need to be valid for this function to work:
242 * tm_sec, tm_min, tm_hour, tm_mday, tm_mon, tm_year
243 *
244 * Note that tm_wday and tm_yday are ignored.
245 *
246 * @time: Broken-out time to convert
247 * @return corresponding time_t value, seconds since 1970-01-01 00:00:00
248 */
249unsigned long rtc_mktime(const struct rtc_time *time);
250
wdenka6840a62001-04-09 21:43:07 +0000251#endif /* _RTC_H_ */