blob: 87aa4fdac392229599669e900c43742675f5983f [file] [log] [blame]
wdenkc6097192002-11-03 00:24:07 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2001-2005
wdenkc6097192002-11-03 00:24:07 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/* ------------------------------------------------------------------------- */
25
26/*
27 * board/config.h - configuration options, board specific
28 */
29
30#ifndef __CONFIG_H
31#define __CONFIG_H
32
33/*
34 * High Level Configuration Options
35 * (easy to change)
36 */
37
38#define CONFIG_MPC824X 1
39#define CONFIG_MPC8245 1
40#define CONFIG_SANDPOINT 1
41
Wolfgang Denk2ae18242010-10-06 09:05:45 +020042#define CONFIG_SYS_TEXT_BASE 0xFFF00000
Wolfgang Denkde550d62010-11-23 23:48:56 +010043#define CONFIG_SYS_LDSCRIPT "board/sandpoint/u-boot.lds"
Wolfgang Denk2ae18242010-10-06 09:05:45 +020044
wdenkc6097192002-11-03 00:24:07 +000045#if 0
46#define USE_DINK32 1
47#else
48#undef USE_DINK32
49#endif
50
51#define CONFIG_CONS_INDEX 3 /* set to '3' for on-chip DUART */
52#define CONFIG_BAUDRATE 9600
53#define CONFIG_DRAM_SPEED 100 /* MHz */
54
wdenk414eec32005-04-02 22:37:54 +000055#define CONFIG_TIMESTAMP /* Print image info with timestamp */
56
wdenkc6097192002-11-03 00:24:07 +000057
Jon Loeligerfe7f7822007-07-08 15:02:44 -050058/*
Jon Loeligera1aa0bb2007-07-10 09:22:23 -050059 * BOOTP options
60 */
61#define CONFIG_BOOTP_BOOTFILESIZE
62#define CONFIG_BOOTP_BOOTPATH
63#define CONFIG_BOOTP_GATEWAY
64#define CONFIG_BOOTP_HOSTNAME
65
66
67/*
Jon Loeligerfe7f7822007-07-08 15:02:44 -050068 * Command line configuration.
69 */
70#include <config_cmd_default.h>
71
72#define CONFIG_CMD_DHCP
73#define CONFIG_CMD_ELF
74#define CONFIG_CMD_I2C
75#define CONFIG_CMD_EEPROM
76#define CONFIG_CMD_NFS
77#define CONFIG_CMD_PCI
78#define CONFIG_CMD_SNTP
wdenkc6097192002-11-03 00:24:07 +000079
80
81/*
82 * Miscellaneous configurable options
83 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020084#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */
85#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
86#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
87#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
88#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
89#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
90#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
91#define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */
wdenkc6097192002-11-03 00:24:07 +000092
93/*-----------------------------------------------------------------------
94 * PCI stuff
95 *-----------------------------------------------------------------------
96 */
97#define CONFIG_PCI /* include pci support */
98#undef CONFIG_PCI_PNP
99
100#define CONFIG_NET_MULTI /* Multi ethernet cards support */
101
102#define CONFIG_EEPRO100
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200103#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
wdenkc6097192002-11-03 00:24:07 +0000104#define CONFIG_NATSEMI
105#define CONFIG_NS8382X
106
107#define PCI_ENET0_IOADDR 0x80000000
108#define PCI_ENET0_MEMADDR 0x80000000
109#define PCI_ENET1_IOADDR 0x81000000
110#define PCI_ENET1_MEMADDR 0x81000000
111
112
113/*-----------------------------------------------------------------------
114 * Start addresses for the final memory configuration
115 * (Set up by the startup code)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200116 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
wdenkc6097192002-11-03 00:24:07 +0000117 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200118#define CONFIG_SYS_SDRAM_BASE 0x00000000
119#define CONFIG_SYS_MAX_RAM_SIZE 0x10000000
wdenkc6097192002-11-03 00:24:07 +0000120
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200121#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
wdenkc6097192002-11-03 00:24:07 +0000122
123#if defined (USE_DINK32)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200124#define CONFIG_SYS_MONITOR_LEN 0x00030000
125#define CONFIG_SYS_MONITOR_BASE 0x00090000
126#define CONFIG_SYS_RAMBOOT 1
127#define CONFIG_SYS_INIT_RAM_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
Wolfgang Denk553f0982010-10-26 13:32:32 +0200128#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200129#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200130#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
wdenkc6097192002-11-03 00:24:07 +0000131#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200132#undef CONFIG_SYS_RAMBOOT
133#define CONFIG_SYS_MONITOR_LEN 0x00030000
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200134#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
wdenkc6097192002-11-03 00:24:07 +0000135
wdenkc6097192002-11-03 00:24:07 +0000136
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200137#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
Wolfgang Denk553f0982010-10-26 13:32:32 +0200138#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200139#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
wdenkc6097192002-11-03 00:24:07 +0000140
141#endif
142
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#define CONFIG_SYS_FLASH_BASE 0xFFF00000
wdenkc6097192002-11-03 00:24:07 +0000144#if 0
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200145#define CONFIG_SYS_FLASH_SIZE (512 * 1024) /* sandpoint has tiny eeprom */
wdenkc6097192002-11-03 00:24:07 +0000146#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200147#define CONFIG_SYS_FLASH_SIZE (1024 * 1024) /* Unity has onboard 1MByte flash */
wdenkc6097192002-11-03 00:24:07 +0000148#endif
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200149#define CONFIG_ENV_IS_IN_FLASH 1
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200150#define CONFIG_ENV_OFFSET 0x00004000 /* Offset of Environment Sector */
151#define CONFIG_ENV_SIZE 0x00002000 /* Total Size of Environment Sector */
wdenkc6097192002-11-03 00:24:07 +0000152
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200153#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc() */
wdenkc6097192002-11-03 00:24:07 +0000154
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200155#define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */
156#define CONFIG_SYS_MEMTEST_END 0x04000000 /* 0 ... 32 MB in DRAM */
wdenkc6097192002-11-03 00:24:07 +0000157
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200158#define CONFIG_SYS_EUMB_ADDR 0xFC000000
wdenkc6097192002-11-03 00:24:07 +0000159
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200160#define CONFIG_SYS_ISA_MEM 0xFD000000
161#define CONFIG_SYS_ISA_IO 0xFE000000
wdenkc6097192002-11-03 00:24:07 +0000162
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200163#define CONFIG_SYS_FLASH_RANGE_BASE 0xFF000000 /* flash memory address range */
164#define CONFIG_SYS_FLASH_RANGE_SIZE 0x01000000
wdenkc6097192002-11-03 00:24:07 +0000165#define FLASH_BASE0_PRELIM 0xFFF00000 /* sandpoint flash */
166#define FLASH_BASE1_PRELIM 0xFF000000 /* PMC onboard flash */
167
168/*
169 * select i2c support configuration
170 *
171 * Supported configurations are {none, software, hardware} drivers.
172 * If the software driver is chosen, there are some additional
173 * configuration items that the driver uses to drive the port pins.
174 */
175#define CONFIG_HARD_I2C 1 /* To enable I2C support */
176#undef CONFIG_SOFT_I2C /* I2C bit-banged */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200177#define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */
178#define CONFIG_SYS_I2C_SLAVE 0x7F
wdenkc6097192002-11-03 00:24:07 +0000179
180#ifdef CONFIG_SOFT_I2C
181#error "Soft I2C is not configured properly. Please review!"
182#define I2C_PORT 3 /* Port A=0, B=1, C=2, D=3 */
183#define I2C_ACTIVE (iop->pdir |= 0x00010000)
184#define I2C_TRISTATE (iop->pdir &= ~0x00010000)
185#define I2C_READ ((iop->pdat & 0x00010000) != 0)
186#define I2C_SDA(bit) if(bit) iop->pdat |= 0x00010000; \
187 else iop->pdat &= ~0x00010000
188#define I2C_SCL(bit) if(bit) iop->pdat |= 0x00020000; \
189 else iop->pdat &= ~0x00020000
190#define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */
191#endif /* CONFIG_SOFT_I2C */
192
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200193#define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 /* EEPROM IS24C02 */
194#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
195#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
196#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
wdenkc6097192002-11-03 00:24:07 +0000197
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
199#define CONFIG_SYS_FLASH_BANKS { FLASH_BASE0_PRELIM , FLASH_BASE1_PRELIM }
wdenkc6097192002-11-03 00:24:07 +0000200
201/*-----------------------------------------------------------------------
202 * Definitions for initial stack pointer and data area (in DPRAM)
203 */
204
205
Wolfgang Denk57d6c582010-11-23 23:17:18 +0100206/* #define CONFIG_WINBOND_83C553 1 / *has a winbond bridge */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200207#define CONFIG_SYS_USE_WINBOND_IDE 0 /*use winbond 83c553 internal IDE ctrlr */
208#define CONFIG_SYS_WINBOND_ISA_CFG_ADDR 0x80005800 /*pci-isa bridge config addr */
209#define CONFIG_SYS_WINBOND_IDE_CFG_ADDR 0x80005900 /*ide config addr */
wdenkc6097192002-11-03 00:24:07 +0000210
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200211#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
212#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
wdenkc6097192002-11-03 00:24:07 +0000213
214/*
215 * NS87308 Configuration
216 */
Jean-Christophe PLAGNIOL-VILLARD55d6d2d2008-08-13 01:40:40 +0200217#define CONFIG_NS87308 /* Nat Semi super-io controller on ISA bus */
wdenkc6097192002-11-03 00:24:07 +0000218
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200219#define CONFIG_SYS_NS87308_BADDR_10 1
wdenkc6097192002-11-03 00:24:07 +0000220
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200221#define CONFIG_SYS_NS87308_DEVS ( CONFIG_SYS_NS87308_UART1 | \
222 CONFIG_SYS_NS87308_UART2 | \
223 CONFIG_SYS_NS87308_POWRMAN | \
224 CONFIG_SYS_NS87308_RTC_APC )
wdenkc6097192002-11-03 00:24:07 +0000225
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200226#undef CONFIG_SYS_NS87308_PS2MOD
wdenkc6097192002-11-03 00:24:07 +0000227
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200228#define CONFIG_SYS_NS87308_CS0_BASE 0x0076
229#define CONFIG_SYS_NS87308_CS0_CONF 0x30
230#define CONFIG_SYS_NS87308_CS1_BASE 0x0075
231#define CONFIG_SYS_NS87308_CS1_CONF 0x30
232#define CONFIG_SYS_NS87308_CS2_BASE 0x0074
233#define CONFIG_SYS_NS87308_CS2_CONF 0x30
wdenkc6097192002-11-03 00:24:07 +0000234
235/*
236 * NS16550 Configuration
237 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200238#define CONFIG_SYS_NS16550
239#define CONFIG_SYS_NS16550_SERIAL
wdenkc6097192002-11-03 00:24:07 +0000240
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200241#define CONFIG_SYS_NS16550_REG_SIZE 1
wdenkc6097192002-11-03 00:24:07 +0000242
wdenkf832d8a2004-06-10 21:55:33 +0000243#if (CONFIG_CONS_INDEX > 2)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200244#define CONFIG_SYS_NS16550_CLK CONFIG_DRAM_SPEED*1000000
wdenkf832d8a2004-06-10 21:55:33 +0000245#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200246#define CONFIG_SYS_NS16550_CLK 1843200
wdenkf832d8a2004-06-10 21:55:33 +0000247#endif
wdenk49822e22004-06-19 21:19:10 +0000248
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200249#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART1_BASE)
250#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_ISA_IO + CONFIG_SYS_NS87308_UART2_BASE)
251#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_EUMB_ADDR + 0x4500)
252#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_EUMB_ADDR + 0x4600)
wdenkc6097192002-11-03 00:24:07 +0000253
254/*
255 * Low Level Configuration Settings
256 * (address mappings, register initial values, etc.)
257 * You should know what you are doing if you make changes here.
258 */
259
260#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
261
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200262#define CONFIG_SYS_ROMNAL 7 /*rom/flash next access time */
263#define CONFIG_SYS_ROMFAL 11 /*rom/flash access time */
wdenkc6097192002-11-03 00:24:07 +0000264
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200265#define CONFIG_SYS_REFINT 430 /* no of clock cycles between CBR refresh cycles */
wdenkc6097192002-11-03 00:24:07 +0000266
267/* the following are for SDRAM only*/
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200268#define CONFIG_SYS_BSTOPRE 121 /* Burst To Precharge, sets open page interval */
269#define CONFIG_SYS_REFREC 8 /* Refresh to activate interval */
270#define CONFIG_SYS_RDLAT 4 /* data latency from read command */
271#define CONFIG_SYS_PRETOACT 3 /* Precharge to activate interval */
272#define CONFIG_SYS_ACTTOPRE 5 /* Activate to Precharge interval */
273#define CONFIG_SYS_ACTORW 3 /* Activate to R/W */
274#define CONFIG_SYS_SDMODE_CAS_LAT 3 /* SDMODE CAS latency */
275#define CONFIG_SYS_SDMODE_WRAP 0 /* SDMODE wrap type */
wdenkc6097192002-11-03 00:24:07 +0000276#if 0
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200277#define CONFIG_SYS_SDMODE_BURSTLEN 2 /* OBSOLETE! SDMODE Burst length 2=4, 3=8 */
wdenkc6097192002-11-03 00:24:07 +0000278#endif
279
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200280#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
281#define CONFIG_SYS_EXTROM 1
282#define CONFIG_SYS_REGDIMM 0
wdenkc6097192002-11-03 00:24:07 +0000283
284
285/* memory bank settings*/
286/*
287 * only bits 20-29 are actually used from these vales to set the
288 * start/end address the upper two bits will be 0, and the lower 20
289 * bits will be set to 0x00000 for a start address, or 0xfffff for an
290 * end address
291 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200292#define CONFIG_SYS_BANK0_START 0x00000000
293#define CONFIG_SYS_BANK0_END (CONFIG_SYS_MAX_RAM_SIZE - 1)
294#define CONFIG_SYS_BANK0_ENABLE 1
295#define CONFIG_SYS_BANK1_START 0x3ff00000
296#define CONFIG_SYS_BANK1_END 0x3fffffff
297#define CONFIG_SYS_BANK1_ENABLE 0
298#define CONFIG_SYS_BANK2_START 0x3ff00000
299#define CONFIG_SYS_BANK2_END 0x3fffffff
300#define CONFIG_SYS_BANK2_ENABLE 0
301#define CONFIG_SYS_BANK3_START 0x3ff00000
302#define CONFIG_SYS_BANK3_END 0x3fffffff
303#define CONFIG_SYS_BANK3_ENABLE 0
304#define CONFIG_SYS_BANK4_START 0x00000000
305#define CONFIG_SYS_BANK4_END 0x00000000
306#define CONFIG_SYS_BANK4_ENABLE 0
307#define CONFIG_SYS_BANK5_START 0x00000000
308#define CONFIG_SYS_BANK5_END 0x00000000
309#define CONFIG_SYS_BANK5_ENABLE 0
310#define CONFIG_SYS_BANK6_START 0x00000000
311#define CONFIG_SYS_BANK6_END 0x00000000
312#define CONFIG_SYS_BANK6_ENABLE 0
313#define CONFIG_SYS_BANK7_START 0x00000000
314#define CONFIG_SYS_BANK7_END 0x00000000
315#define CONFIG_SYS_BANK7_ENABLE 0
wdenkc6097192002-11-03 00:24:07 +0000316/*
317 * Memory bank enable bitmask, specifying which of the banks defined above
318 are actually present. MSB is for bank #7, LSB is for bank #0.
319 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200320#define CONFIG_SYS_BANK_ENABLE 0x01
wdenkc6097192002-11-03 00:24:07 +0000321
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200322#define CONFIG_SYS_ODCR 0xff /* configures line driver impedances, */
wdenkc6097192002-11-03 00:24:07 +0000323 /* see 8240 book for bit definitions */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200324#define CONFIG_SYS_PGMAX 0x32 /* how long the 8240 retains the */
wdenkc6097192002-11-03 00:24:07 +0000325 /* currently accessed page in memory */
326 /* see 8240 book for details */
327
328/* SDRAM 0 - 256MB */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200329#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
330#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000331
332/* stack in DCACHE @ 1GB (no backing mem) */
333#if defined(USE_DINK32)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200334#define CONFIG_SYS_IBAT1L (0x40000000 | BATL_PP_00 )
335#define CONFIG_SYS_IBAT1U (0x40000000 | BATU_BL_128K )
wdenkc6097192002-11-03 00:24:07 +0000336#else
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200337#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
338#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000339#endif
340
341/* PCI memory */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200342#define CONFIG_SYS_IBAT2L (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
343#define CONFIG_SYS_IBAT2U (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000344
345/* Flash, config addrs, etc */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200346#define CONFIG_SYS_IBAT3L (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
347#define CONFIG_SYS_IBAT3U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
wdenkc6097192002-11-03 00:24:07 +0000348
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200349#define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L
350#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
351#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
352#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
353#define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L
354#define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U
355#define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L
356#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
wdenkc6097192002-11-03 00:24:07 +0000357
358/*
359 * For booting Linux, the board info and command line data
360 * have to be in the first 8 MB of memory, since this is
361 * the maximum mapped by the Linux kernel during initialization.
362 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200363#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
wdenkc6097192002-11-03 00:24:07 +0000364/*-----------------------------------------------------------------------
365 * FLASH organization
366 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200367#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */
368#define CONFIG_SYS_MAX_FLASH_SECT 20 /* max number of sectors on one chip */
wdenkc6097192002-11-03 00:24:07 +0000369
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200370#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
371#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
wdenkc6097192002-11-03 00:24:07 +0000372
373/*-----------------------------------------------------------------------
374 * Cache Configuration
375 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200376#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC8240 CPU */
Jon Loeligerfe7f7822007-07-08 15:02:44 -0500377#if defined(CONFIG_CMD_KGDB)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200378# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
wdenkc6097192002-11-03 00:24:07 +0000379#endif
380
wdenkc6097192002-11-03 00:24:07 +0000381/* values according to the manual */
382
383#define CONFIG_DRAM_50MHZ 1
384#define CONFIG_SDRAM_50MHZ
385
386#undef NR_8259_INTS
387#define NR_8259_INTS 1
388
389
390#define CONFIG_DISK_SPINUP_TIME 1000000
391
392
393#endif /* __CONFIG_H */