blob: 917350f2ec0272baa51b3ff55f66a961217a36d5 [file] [log] [blame]
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +01001/*
2 * (C) Copyright 2003-2007
3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +00005 * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +01006 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02007 * SPDX-License-Identifier: GPL-2.0+
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +01008 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010013/*
14 * High Level Configuration Options
15 */
16
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010017/* CPU and board */
Masahiro Yamadab2a6dfe2014-01-16 11:03:07 +090018#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010019#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */
20
Becky Bruce31d82672008-05-08 19:02:12 -050021#define CONFIG_HIGH_BATS 1 /* High BATs supported */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010022
Wolfgang Denk2ae18242010-10-06 09:05:45 +020023#define CONFIG_SYS_TEXT_BASE 0xfff00000
24
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010025/*
Jon Loeliger079a1362007-07-10 10:12:10 -050026 * BOOTP options
27 */
28#define CONFIG_BOOTP_BOOTFILESIZE
29#define CONFIG_BOOTP_BOOTPATH
30#define CONFIG_BOOTP_GATEWAY
31#define CONFIG_BOOTP_HOSTNAME
32
Jon Loeliger079a1362007-07-10 10:12:10 -050033/*
Jon Loeliger5dc11a52007-07-04 22:33:01 -050034 * Command line configuration.
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010035 */
Jon Loeliger5dc11a52007-07-04 22:33:01 -050036#define CONFIG_CMD_BEDBUG
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020037#define CONFIG_CMD_DATE
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020038#define CONFIG_CMD_DTT
39#define CONFIG_CMD_EEPROM
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020040#define CONFIG_CMD_IDE
41#define CONFIG_CMD_IMMAP
42#define CONFIG_CMD_JFFS2
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020043#define CONFIG_CMD_REGINFO
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010044
45/*
46 * Serial console configuration
47 */
48#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
49#define CONFIG_NETCONSOLE 1 /* network console */
50#define CONFIG_BAUDRATE 115200
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020051#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010052
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010053/*
54 * Ethernet configuration
55 */
56#define CONFIG_MPC5xxx_FEC 1
Ben Warren86321fc2009-02-05 23:58:25 -080057#define CONFIG_MPC5xxx_FEC_MII100
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010058#define CONFIG_PHY_ADDR 0x2
59#define CONFIG_PHY_TYPE 0x79c874
Bartlomiej Siekac00125e2007-05-27 16:58:45 +020060#define CONFIG_RESET_PHY_R 1
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010061
62/*
63 * Autobooting
64 */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010065#undef CONFIG_BOOTARGS
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010066
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020067#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020068
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010069/*
70 * Default environment settings
71 */
72#define CONFIG_EXTRA_ENV_SETTINGS \
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010073 "netdev=eth0\0" \
74 "hostname=motionpro\0" \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +000075 "netmask=255.255.255.0\0" \
76 "ipaddr=192.168.1.106\0" \
77 "serverip=192.168.1.100\0" \
78 "gatewayip=192.168.1.100\0" \
Bartlomiej Sieka1f1369c2007-05-08 09:21:57 +020079 "console=ttyPSC0,115200\0" \
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020080 "u-boot_addr=400000\0" \
81 "kernel_addr=400000\0" \
82 "fdt_addr=700000\0" \
83 "ramdisk_addr=800000\0" \
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +020084 "multi_image_addr=800000\0" \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +000085 "rootpath=/opt/eldk-4.2/ppc_6xx\0" \
86 "u-boot=/tftpboot/motionpro/u-boot.bin\0" \
87 "bootfile=/tftpboot/motionpro/uImage\0" \
88 "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \
89 "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +020090 "multi_image_file=kernel+initrd+dtb.img\0" \
Bartlomiej Sieka70492882007-05-27 17:26:46 +020091 "load=tftp ${u-boot_addr} ${u-boot}\0" \
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020092 "update=prot off fff00000 +${filesize};" \
93 "era fff00000 +${filesize}; " \
Bartlomiej Sieka70492882007-05-27 17:26:46 +020094 "cp.b ${u-boot_addr} fff00000 ${filesize};" \
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +020095 "prot on fff00000 +${filesize}\0" \
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010096 "ramargs=setenv bootargs root=/dev/ram rw\0" \
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +010097 "nfsargs=setenv bootargs root=/dev/nfs rw " \
Bartlomiej Sieka70492882007-05-27 17:26:46 +020098 "nfsroot=${serverip}:${rootpath}\0" \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +000099 "fat_args=setenv bootargs root=/dev/sda rw\0" \
100 "mtdids=nor0=ff000000.flash\0" \
101 "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \
102 "128k(env),128k(redund_env)," \
103 "128k(dtb),128k(user_data)\0" \
104 "addcons=setenv bootargs ${bootargs} console=${console}\0" \
105 "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \
Bartlomiej Sieka70492882007-05-27 17:26:46 +0200106 "addip=setenv bootargs ${bootargs} " \
107 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
108 "${netmask}:${hostname}:${netdev}:off panic=1 " \
109 "console=${console}\0" \
110 "net_nfs=tftp ${kernel_addr} ${bootfile}; " \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +0000111 "tftp ${fdt_addr} ${fdt_file}; " \
112 "run nfsargs addip addmtd; " \
Bartlomiej Sieka70492882007-05-27 17:26:46 +0200113 "bootm ${kernel_addr} - ${fdt_addr}\0" \
114 "net_self=tftp ${kernel_addr} ${bootfile}; " \
115 "tftp ${fdt_addr} ${fdt_file}; " \
116 "tftp ${ramdisk_addr} ${ramdisk_file}; " \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +0000117 "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \
118 "run ramargs addip addcons addmtd; " \
Bartlomiej Sieka70492882007-05-27 17:26:46 +0200119 "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +0000120 "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +0200121 "${multi_image_addr} ${multi_image_file}; " \
122 "bootm ${multi_image_addr}\0" \
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100123 ""
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +0000124#define CONFIG_BOOTCOMMAND "run fat_multi"
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100125
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100126/*
127 * do board-specific init
128 */
129#define CONFIG_BOARD_EARLY_INIT_R 1
130
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100131/*
132 * Low level configuration
133 */
134
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100135/*
Bartlomiej Siekad3afa1e2007-10-23 13:14:10 +0200136 * Clock configuration: SYS_XTALIN = 33MHz
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100137 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200138#define CONFIG_SYS_MPC5XXX_CLKIN 33000000
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100139
Bartlomiej Sieka06241d52007-05-08 09:39:12 +0200140/*
Bartlomiej Siekac99512d2007-05-27 16:53:43 +0200141 * Set IPB speed to 100MHz
Bartlomiej Sieka06241d52007-05-08 09:39:12 +0200142 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200143#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK
Bartlomiej Sieka06241d52007-05-08 09:39:12 +0200144
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100145/*
146 * Memory map
147 */
148/*
149 * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000.
150 * Setting MBAR to otherwise will cause system hang when using SmartDMA such
151 * as network commands.
152 */
Wolfgang Denk7a8ddee2010-10-20 08:31:45 +0200153#define CONFIG_SYS_MBAR 0xf0000000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200154#define CONFIG_SYS_SDRAM_BASE 0x00000000
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100155
156/*
157 * If building for running out of SDRAM, then MBAR has been set up beforehand
158 * (e.g., by the BDI). Otherwise we must specify the default boot-up value of
159 * MBAR, as given in the doccumentation.
160 */
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200161#if CONFIG_SYS_TEXT_BASE == 0x00100000
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200162#define CONFIG_SYS_DEFAULT_MBAR 0xf0000000
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200163#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200164#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
165#define CONFIG_SYS_LOWBOOT 1
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200166#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100167
168/* Use SRAM until RAM will be available */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200169#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
Wolfgang Denk553f0982010-10-26 13:32:32 +0200170#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100171
Wolfgang Denk25ddd1f2010-10-26 14:34:52 +0200172#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200173#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100174
Wolfgang Denk14d0a022010-10-07 21:51:12 +0200175#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200176#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
177#define CONFIG_SYS_RAMBOOT 1
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100178#endif
179
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +0000180#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200181#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */
182#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100183
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100184/*
185 * Chip selects configuration
186 */
187/* Boot Chipselect */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200188#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
189#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
190#define CONFIG_SYS_BOOTCS_CFG 0x00045D00
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100191
192/* Flash memory addressing */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200193#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
194#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
195#define CONFIG_SYS_CS0_CFG CONFIG_SYS_BOOTCS_CFG
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100196
197/* Dual Port SRAM -- Kollmorgen Drive memory addressing */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200198#define CONFIG_SYS_CS1_START 0x50000000
199#define CONFIG_SYS_CS1_SIZE 0x10000
200#define CONFIG_SYS_CS1_CFG 0x05055800
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100201
202/* Local register access */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200203#define CONFIG_SYS_CS2_START 0x50010000
204#define CONFIG_SYS_CS2_SIZE 0x10000
205#define CONFIG_SYS_CS2_CFG 0x05055800
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100206
207/* Anybus CompactCom Module memory addressing */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200208#define CONFIG_SYS_CS3_START 0x50020000
209#define CONFIG_SYS_CS3_SIZE 0x10000
210#define CONFIG_SYS_CS3_CFG 0x05055800
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100211
212/* No burst and dead cycle = 2 for all CSs */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200213#define CONFIG_SYS_CS_BURST 0x00000000
214#define CONFIG_SYS_CS_DEADCYCLE 0x22222222
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100215
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100216/*
217 * SDRAM configuration
218 */
Bartlomiej Siekad3afa1e2007-10-23 13:14:10 +0200219/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */
220#define SDRAM_CONFIG1 0x62322900
221#define SDRAM_CONFIG2 0x88c70000
222#define SDRAM_CONTROL 0x504f0000
223#define SDRAM_MODE 0x00cd0000
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100224
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100225/*
226 * Flash configuration
227 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200228#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
Jean-Christophe PLAGNIOL-VILLARD00b18832008-08-13 01:40:42 +0200229#define CONFIG_FLASH_CFI_DRIVER 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200230#define CONFIG_SYS_FLASH_BASE 0xff000000
231#define CONFIG_SYS_FLASH_SIZE 0x01000000
232#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
233#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
234#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100235#define CONFIG_FLASH_16BIT /* Flash is 16-bit */
236
Piotr Kruszynski7d98ba72007-05-10 16:55:52 +0200237/*
238 * MTD configuration
239 */
Stefan Roese68d7d652009-03-19 13:30:36 +0100240#define CONFIG_CMD_MTDPARTS
Stefan Roese942556a2009-05-12 14:32:58 +0200241#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
242#define CONFIG_FLASH_CFI_MTD
Piotr Kruszynski7d98ba72007-05-10 16:55:52 +0200243#define MTDIDS_DEFAULT "nor0=motionpro-0"
244#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \
Wolfgang Grandegger0ffb9412012-09-29 09:27:00 +0000245 "13m(fs),2m(kernel),384k(uboot)," \
Bartlomiej Siekad3afa1e2007-10-23 13:14:10 +0200246 "128k(env),128k(redund_env)," \
247 "128k(dtb),-(user_data)"
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100248
249/*
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +0200250 * IDE/ATA configuration
251 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200252#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
253#define CONFIG_SYS_IDE_MAXBUS 1
254#define CONFIG_SYS_IDE_MAXDEVICE 1
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +0200255#define CONFIG_IDE_PREINIT
256
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200257#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060
258#define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET
259#define CONFIG_SYS_ATA_STRIDE 4
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +0200260#define CONFIG_DOS_PARTITION
261
Bartlomiej Siekafa5c2ba2007-05-08 10:23:56 +0200262/*
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200263 * I2C configuration
264 */
265#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200266#define CONFIG_SYS_I2C_MODULE 2 /* select I2C module #2 */
267#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
268#define CONFIG_SYS_I2C_SLAVE 0x7F
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200269
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200270/*
271 * EEPROM configuration
272 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200273#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
274#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 1 /* 2 bytes per write cycle */
275#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 /* 2ms/cycle + 3ms extra */
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200276
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200277/*
278 * RTC configuration
279 */
280#define CONFIG_RTC_DS1337 1
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200281#define CONFIG_SYS_I2C_RTC_ADDR 0x68
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200282
Piotr Kruszynskide1de022007-05-08 13:05:44 +0200283/*
Bartlomiej Siekaa11c0b82007-05-27 16:51:48 +0200284 * Status LED configuration
285 */
286#define CONFIG_STATUS_LED /* Status LED enabled */
287#define CONFIG_BOARD_SPECIFIC_LED
288
289#define ENABLE_GPIO_OUT 0x00000024
290#define LED_ON 0x00000010
291
292#ifndef __ASSEMBLY__
293/*
294 * In case of Motion-PRO, a LED is identified by its corresponding
295 * GPT Enable and Mode Select Register.
296 */
297typedef volatile unsigned long * led_id_t;
298
299extern void __led_init(led_id_t id, int state);
300extern void __led_toggle(led_id_t id);
301extern void __led_set(led_id_t id, int state);
302#endif /* __ASSEMBLY__ */
303
Bartlomiej Siekaa11c0b82007-05-27 16:51:48 +0200304/*
Bartlomiej Sieka93b78f52007-05-27 16:57:15 +0200305 * Temperature sensor
306 */
307#define CONFIG_DTT_LM75 1
308#define CONFIG_DTT_SENSORS { 0x49 }
309
Bartlomiej Sieka93b78f52007-05-27 16:57:15 +0200310/*
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100311 * Environment settings
312 */
Jean-Christophe PLAGNIOL-VILLARD5a1aceb2008-09-10 22:48:04 +0200313#define CONFIG_ENV_IS_IN_FLASH 1
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100314/* This has to be a multiple of the Flash sector size */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200315#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200316#define CONFIG_ENV_SIZE 0x1000
317#define CONFIG_ENV_SECT_SIZE 0x20000
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100318
Bartlomiej Sieka4520fd42007-05-27 17:06:36 +0200319/* Configuration of redundant environment */
Jean-Christophe PLAGNIOL-VILLARD0e8d1582008-09-10 22:48:06 +0200320#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
321#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100322
323/*
324 * Pin multiplexing configuration
325 */
326
327/* PSC1: UART1
328 * PSC2: GPIO (default)
329 * PSC3: GPIO (default)
330 * USB: 2xUART4/5
331 * Ethernet: Ethernet 100Mbit with MD
332 * Timer: CAN2/GPIO
333 * PSC6/IRDA: GPIO (default)
334 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200335#define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100336
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100337/*
Bartlomiej Siekac75e6392007-05-27 16:55:23 +0200338 * Motion-PRO's CPLD revision control register
339 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200340#define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06)
Bartlomiej Siekac75e6392007-05-27 16:55:23 +0200341
Bartlomiej Siekac75e6392007-05-27 16:55:23 +0200342/*
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100343 * Miscellaneous configurable options
344 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200345#define CONFIG_SYS_LONGHELP /* undef to save memory */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200346#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
347#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
348#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
349#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100350
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200351#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
352#define CONFIG_SYS_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */
353#define CONFIG_SYS_ALT_MEMTEST
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100354
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200355#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100356
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100357/*
358 * Various low-level settings
359 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200360#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
361#define CONFIG_SYS_HID0_FINAL HID0_ICE
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100362
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200363#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100364
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100365/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +0200366#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100367
Bartlomiej Sieka1f1369c2007-05-08 09:21:57 +0200368#define OF_CPU "PowerPC,5200@0"
369#define OF_SOC "soc5200@f0000000"
370#define OF_TBCLK (bd->bi_busfreq / 4)
Bartlomiej Sieka70492882007-05-27 17:26:46 +0200371#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
Bartlomiej Sieka1f1369c2007-05-08 09:21:57 +0200372
Bartlomiej Sieka53d4a492007-02-09 10:45:42 +0100373#endif /* __CONFIG_H */