blob: b142b80734dccd66b63e9090e5a4073e25eb0a16 [file] [log] [blame]
Peng Fan2f172312019-08-27 06:26:01 +00001// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright 2019 NXP
4 */
5
6#include <dt-bindings/clock/imx8mm-clock.h>
Marek Vasutf0e10e32021-04-02 13:14:53 +02007#include <dt-bindings/power/imx8mm-power.h>
8#include <dt-bindings/reset/imx8mq-reset.h>
Peng Fan2f172312019-08-27 06:26:01 +00009#include <dt-bindings/gpio/gpio.h>
10#include <dt-bindings/input/input.h>
11#include <dt-bindings/interrupt-controller/arm-gic.h>
12#include <dt-bindings/thermal/thermal.h>
13
14#include "imx8mm-pinfunc.h"
15
16/ {
Peng Fan2f172312019-08-27 06:26:01 +000017 interrupt-parent = <&gic>;
18 #address-cells = <2>;
19 #size-cells = <2>;
20
21 aliases {
22 ethernet0 = &fec1;
Adam Ford15d79fc2020-12-04 17:27:46 -060023 gpio0 = &gpio1;
24 gpio1 = &gpio2;
25 gpio2 = &gpio3;
26 gpio3 = &gpio4;
27 gpio4 = &gpio5;
Peng Fan2f172312019-08-27 06:26:01 +000028 i2c0 = &i2c1;
29 i2c1 = &i2c2;
30 i2c2 = &i2c3;
31 i2c3 = &i2c4;
Adam Ford15d79fc2020-12-04 17:27:46 -060032 mmc0 = &usdhc1;
33 mmc1 = &usdhc2;
34 mmc2 = &usdhc3;
Peng Fan2f172312019-08-27 06:26:01 +000035 serial0 = &uart1;
36 serial1 = &uart2;
37 serial2 = &uart3;
38 serial3 = &uart4;
39 spi0 = &ecspi1;
40 spi1 = &ecspi2;
41 spi2 = &ecspi3;
Peng Fan2f172312019-08-27 06:26:01 +000042 };
43
44 cpus {
45 #address-cells = <1>;
46 #size-cells = <0>;
47
Peng Fan387c4492019-10-16 10:24:30 +000048 idle-states {
49 entry-method = "psci";
50
51 cpu_pd_wait: cpu-pd-wait {
52 compatible = "arm,idle-state";
53 arm,psci-suspend-param = <0x0010033>;
54 local-timer-stop;
55 entry-latency-us = <1000>;
56 exit-latency-us = <700>;
57 min-residency-us = <2700>;
58 };
59 };
60
Peng Fan2f172312019-08-27 06:26:01 +000061 A53_0: cpu@0 {
62 device_type = "cpu";
63 compatible = "arm,cortex-a53";
64 reg = <0x0>;
65 clock-latency = <61036>; /* two CLK32 periods */
66 clocks = <&clk IMX8MM_CLK_ARM>;
67 enable-method = "psci";
68 next-level-cache = <&A53_L2>;
69 operating-points-v2 = <&a53_opp_table>;
Peng Fan387c4492019-10-16 10:24:30 +000070 nvmem-cells = <&cpu_speed_grade>;
71 nvmem-cell-names = "speed_grade";
72 cpu-idle-states = <&cpu_pd_wait>;
Adam Ford15d79fc2020-12-04 17:27:46 -060073 #cooling-cells = <2>;
Peng Fan2f172312019-08-27 06:26:01 +000074 };
75
76 A53_1: cpu@1 {
77 device_type = "cpu";
78 compatible = "arm,cortex-a53";
79 reg = <0x1>;
80 clock-latency = <61036>; /* two CLK32 periods */
81 clocks = <&clk IMX8MM_CLK_ARM>;
82 enable-method = "psci";
83 next-level-cache = <&A53_L2>;
84 operating-points-v2 = <&a53_opp_table>;
Peng Fan387c4492019-10-16 10:24:30 +000085 cpu-idle-states = <&cpu_pd_wait>;
Adam Ford15d79fc2020-12-04 17:27:46 -060086 #cooling-cells = <2>;
Peng Fan2f172312019-08-27 06:26:01 +000087 };
88
89 A53_2: cpu@2 {
90 device_type = "cpu";
91 compatible = "arm,cortex-a53";
92 reg = <0x2>;
93 clock-latency = <61036>; /* two CLK32 periods */
94 clocks = <&clk IMX8MM_CLK_ARM>;
95 enable-method = "psci";
96 next-level-cache = <&A53_L2>;
97 operating-points-v2 = <&a53_opp_table>;
Peng Fan387c4492019-10-16 10:24:30 +000098 cpu-idle-states = <&cpu_pd_wait>;
Adam Ford15d79fc2020-12-04 17:27:46 -060099 #cooling-cells = <2>;
Peng Fan2f172312019-08-27 06:26:01 +0000100 };
101
102 A53_3: cpu@3 {
103 device_type = "cpu";
104 compatible = "arm,cortex-a53";
105 reg = <0x3>;
106 clock-latency = <61036>; /* two CLK32 periods */
107 clocks = <&clk IMX8MM_CLK_ARM>;
108 enable-method = "psci";
109 next-level-cache = <&A53_L2>;
110 operating-points-v2 = <&a53_opp_table>;
Peng Fan387c4492019-10-16 10:24:30 +0000111 cpu-idle-states = <&cpu_pd_wait>;
Adam Ford15d79fc2020-12-04 17:27:46 -0600112 #cooling-cells = <2>;
Peng Fan2f172312019-08-27 06:26:01 +0000113 };
114
115 A53_L2: l2-cache0 {
116 compatible = "cache";
117 };
118 };
119
120 a53_opp_table: opp-table {
121 compatible = "operating-points-v2";
122 opp-shared;
123
124 opp-1200000000 {
125 opp-hz = /bits/ 64 <1200000000>;
126 opp-microvolt = <850000>;
Peng Fan387c4492019-10-16 10:24:30 +0000127 opp-supported-hw = <0xe>, <0x7>;
Peng Fan2f172312019-08-27 06:26:01 +0000128 clock-latency-ns = <150000>;
Peng Fan387c4492019-10-16 10:24:30 +0000129 opp-suspend;
Peng Fan2f172312019-08-27 06:26:01 +0000130 };
131
132 opp-1600000000 {
133 opp-hz = /bits/ 64 <1600000000>;
Adam Ford15d79fc2020-12-04 17:27:46 -0600134 opp-microvolt = <950000>;
Peng Fan387c4492019-10-16 10:24:30 +0000135 opp-supported-hw = <0xc>, <0x7>;
136 clock-latency-ns = <150000>;
137 opp-suspend;
138 };
139
140 opp-1800000000 {
141 opp-hz = /bits/ 64 <1800000000>;
142 opp-microvolt = <1000000>;
143 opp-supported-hw = <0x8>, <0x3>;
Peng Fan2f172312019-08-27 06:26:01 +0000144 clock-latency-ns = <150000>;
145 opp-suspend;
146 };
147 };
148
Peng Fan2f172312019-08-27 06:26:01 +0000149 osc_32k: clock-osc-32k {
150 compatible = "fixed-clock";
151 #clock-cells = <0>;
152 clock-frequency = <32768>;
153 clock-output-names = "osc_32k";
154 };
155
156 osc_24m: clock-osc-24m {
157 compatible = "fixed-clock";
158 #clock-cells = <0>;
159 clock-frequency = <24000000>;
160 clock-output-names = "osc_24m";
161 };
162
163 clk_ext1: clock-ext1 {
164 compatible = "fixed-clock";
165 #clock-cells = <0>;
166 clock-frequency = <133000000>;
167 clock-output-names = "clk_ext1";
168 };
169
170 clk_ext2: clock-ext2 {
171 compatible = "fixed-clock";
172 #clock-cells = <0>;
173 clock-frequency = <133000000>;
174 clock-output-names = "clk_ext2";
175 };
176
177 clk_ext3: clock-ext3 {
178 compatible = "fixed-clock";
179 #clock-cells = <0>;
180 clock-frequency = <133000000>;
181 clock-output-names = "clk_ext3";
182 };
183
184 clk_ext4: clock-ext4 {
185 compatible = "fixed-clock";
186 #clock-cells = <0>;
187 clock-frequency= <133000000>;
188 clock-output-names = "clk_ext4";
189 };
190
Peng Fan2f172312019-08-27 06:26:01 +0000191 psci {
192 compatible = "arm,psci-1.0";
193 method = "smc";
194 };
195
196 pmu {
197 compatible = "arm,armv8-pmuv3";
198 interrupts = <GIC_PPI 7
Peng Fan8d3e37c2020-12-27 14:18:13 +0800199 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
Peng Fan2f172312019-08-27 06:26:01 +0000200 interrupt-affinity = <&A53_0>, <&A53_1>, <&A53_2>, <&A53_3>;
201 };
202
203 timer {
204 compatible = "arm,armv8-timer";
Peng Fan8d3e37c2020-12-27 14:18:13 +0800205 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Secure */
206 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Physical Non-Secure */
207 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, /* Virtual */
208 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; /* Hypervisor */
Peng Fan2f172312019-08-27 06:26:01 +0000209 clock-frequency = <8000000>;
210 arm,no-tick-in-suspend;
211 };
212
Adam Ford15d79fc2020-12-04 17:27:46 -0600213 thermal-zones {
214 cpu-thermal {
215 polling-delay-passive = <250>;
216 polling-delay = <2000>;
217 thermal-sensors = <&tmu>;
218 trips {
219 cpu_alert0: trip0 {
220 temperature = <85000>;
221 hysteresis = <2000>;
222 type = "passive";
223 };
224
225 cpu_crit0: trip1 {
226 temperature = <95000>;
227 hysteresis = <2000>;
228 type = "critical";
229 };
230 };
231
232 cooling-maps {
233 map0 {
234 trip = <&cpu_alert0>;
235 cooling-device =
236 <&A53_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
237 <&A53_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
238 <&A53_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
239 <&A53_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
240 };
241 };
242 };
243 };
244
Peng Fan387c4492019-10-16 10:24:30 +0000245 usbphynop1: usbphynop1 {
Marek Vasutaded9402021-03-31 11:47:25 +0200246 #phy-cells = <0>;
Peng Fan387c4492019-10-16 10:24:30 +0000247 compatible = "usb-nop-xceiv";
248 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
249 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
250 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
251 clock-names = "main_clk";
252 };
253
254 usbphynop2: usbphynop2 {
Marek Vasutaded9402021-03-31 11:47:25 +0200255 #phy-cells = <0>;
Peng Fan387c4492019-10-16 10:24:30 +0000256 compatible = "usb-nop-xceiv";
257 clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
258 assigned-clocks = <&clk IMX8MM_CLK_USB_PHY_REF>;
259 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_100M>;
260 clock-names = "main_clk";
261 };
262
263 soc@0 {
Peng Fan2f172312019-08-27 06:26:01 +0000264 compatible = "simple-bus";
265 #address-cells = <1>;
266 #size-cells = <1>;
267 ranges = <0x0 0x0 0x0 0x3e000000>;
268
269 aips1: bus@30000000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600270 compatible = "fsl,aips-bus", "simple-bus";
271 reg = <0x30000000 0x400000>;
Peng Fan2f172312019-08-27 06:26:01 +0000272 #address-cells = <1>;
273 #size-cells = <1>;
Peng Fan387c4492019-10-16 10:24:30 +0000274 ranges = <0x30000000 0x30000000 0x400000>;
275
276 sai1: sai@30010000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600277 #sound-dai-cells = <0>;
Peng Fan387c4492019-10-16 10:24:30 +0000278 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
279 reg = <0x30010000 0x10000>;
280 interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
281 clocks = <&clk IMX8MM_CLK_SAI1_IPG>,
282 <&clk IMX8MM_CLK_SAI1_ROOT>,
283 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
284 clock-names = "bus", "mclk1", "mclk2", "mclk3";
285 dmas = <&sdma2 0 2 0>, <&sdma2 1 2 0>;
286 dma-names = "rx", "tx";
287 status = "disabled";
288 };
289
290 sai2: sai@30020000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600291 #sound-dai-cells = <0>;
Peng Fan387c4492019-10-16 10:24:30 +0000292 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
293 reg = <0x30020000 0x10000>;
294 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
295 clocks = <&clk IMX8MM_CLK_SAI2_IPG>,
296 <&clk IMX8MM_CLK_SAI2_ROOT>,
297 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
298 clock-names = "bus", "mclk1", "mclk2", "mclk3";
299 dmas = <&sdma2 2 2 0>, <&sdma2 3 2 0>;
300 dma-names = "rx", "tx";
301 status = "disabled";
302 };
303
304 sai3: sai@30030000 {
305 #sound-dai-cells = <0>;
306 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
307 reg = <0x30030000 0x10000>;
308 interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
309 clocks = <&clk IMX8MM_CLK_SAI3_IPG>,
310 <&clk IMX8MM_CLK_SAI3_ROOT>,
311 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
312 clock-names = "bus", "mclk1", "mclk2", "mclk3";
313 dmas = <&sdma2 4 2 0>, <&sdma2 5 2 0>;
314 dma-names = "rx", "tx";
315 status = "disabled";
316 };
317
318 sai5: sai@30050000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600319 #sound-dai-cells = <0>;
Peng Fan387c4492019-10-16 10:24:30 +0000320 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
321 reg = <0x30050000 0x10000>;
322 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
323 clocks = <&clk IMX8MM_CLK_SAI5_IPG>,
324 <&clk IMX8MM_CLK_SAI5_ROOT>,
325 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
326 clock-names = "bus", "mclk1", "mclk2", "mclk3";
327 dmas = <&sdma2 8 2 0>, <&sdma2 9 2 0>;
328 dma-names = "rx", "tx";
329 status = "disabled";
330 };
331
332 sai6: sai@30060000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600333 #sound-dai-cells = <0>;
Peng Fan387c4492019-10-16 10:24:30 +0000334 compatible = "fsl,imx8mm-sai", "fsl,imx8mq-sai";
335 reg = <0x30060000 0x10000>;
336 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
337 clocks = <&clk IMX8MM_CLK_SAI6_IPG>,
338 <&clk IMX8MM_CLK_SAI6_ROOT>,
339 <&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_CLK_DUMMY>;
340 clock-names = "bus", "mclk1", "mclk2", "mclk3";
341 dmas = <&sdma2 10 2 0>, <&sdma2 11 2 0>;
342 dma-names = "rx", "tx";
343 status = "disabled";
344 };
Peng Fan2f172312019-08-27 06:26:01 +0000345
Peng Fan8d3e37c2020-12-27 14:18:13 +0800346 micfil: audio-controller@30080000 {
347 compatible = "fsl,imx8mm-micfil";
348 reg = <0x30080000 0x10000>;
349 interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
350 <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
351 <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
352 <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
353 clocks = <&clk IMX8MM_CLK_PDM_IPG>,
354 <&clk IMX8MM_CLK_PDM_ROOT>,
355 <&clk IMX8MM_AUDIO_PLL1_OUT>,
356 <&clk IMX8MM_AUDIO_PLL2_OUT>,
357 <&clk IMX8MM_CLK_EXT3>;
358 clock-names = "ipg_clk", "ipg_clk_app",
359 "pll8k", "pll11k", "clkext3";
360 dmas = <&sdma2 24 25 0x80000000>;
361 dma-names = "rx";
362 status = "disabled";
363 };
364
365 spdif1: spdif@30090000 {
366 compatible = "fsl,imx35-spdif";
367 reg = <0x30090000 0x10000>;
368 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
369 clocks = <&clk IMX8MM_CLK_AUDIO_AHB>, /* core */
370 <&clk IMX8MM_CLK_24M>, /* rxtx0 */
371 <&clk IMX8MM_CLK_SPDIF1>, /* rxtx1 */
372 <&clk IMX8MM_CLK_DUMMY>, /* rxtx2 */
373 <&clk IMX8MM_CLK_DUMMY>, /* rxtx3 */
374 <&clk IMX8MM_CLK_DUMMY>, /* rxtx4 */
375 <&clk IMX8MM_CLK_AUDIO_AHB>, /* rxtx5 */
376 <&clk IMX8MM_CLK_DUMMY>, /* rxtx6 */
377 <&clk IMX8MM_CLK_DUMMY>, /* rxtx7 */
378 <&clk IMX8MM_CLK_DUMMY>; /* spba */
379 clock-names = "core", "rxtx0",
380 "rxtx1", "rxtx2",
381 "rxtx3", "rxtx4",
382 "rxtx5", "rxtx6",
383 "rxtx7", "spba";
384 dmas = <&sdma2 28 18 0>, <&sdma2 29 18 0>;
385 dma-names = "rx", "tx";
386 status = "disabled";
387 };
388
Peng Fan2f172312019-08-27 06:26:01 +0000389 gpio1: gpio@30200000 {
390 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
391 reg = <0x30200000 0x10000>;
392 interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
393 <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000394 clocks = <&clk IMX8MM_CLK_GPIO1_ROOT>;
Peng Fan2f172312019-08-27 06:26:01 +0000395 gpio-controller;
396 #gpio-cells = <2>;
397 interrupt-controller;
398 #interrupt-cells = <2>;
Peng Fan387c4492019-10-16 10:24:30 +0000399 gpio-ranges = <&iomuxc 0 10 30>;
Peng Fan2f172312019-08-27 06:26:01 +0000400 };
401
402 gpio2: gpio@30210000 {
403 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
404 reg = <0x30210000 0x10000>;
405 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
406 <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000407 clocks = <&clk IMX8MM_CLK_GPIO2_ROOT>;
Peng Fan2f172312019-08-27 06:26:01 +0000408 gpio-controller;
409 #gpio-cells = <2>;
410 interrupt-controller;
411 #interrupt-cells = <2>;
Peng Fan387c4492019-10-16 10:24:30 +0000412 gpio-ranges = <&iomuxc 0 40 21>;
Peng Fan2f172312019-08-27 06:26:01 +0000413 };
414
415 gpio3: gpio@30220000 {
416 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
417 reg = <0x30220000 0x10000>;
418 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
419 <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000420 clocks = <&clk IMX8MM_CLK_GPIO3_ROOT>;
Peng Fan2f172312019-08-27 06:26:01 +0000421 gpio-controller;
422 #gpio-cells = <2>;
423 interrupt-controller;
424 #interrupt-cells = <2>;
Peng Fan387c4492019-10-16 10:24:30 +0000425 gpio-ranges = <&iomuxc 0 61 26>;
Peng Fan2f172312019-08-27 06:26:01 +0000426 };
427
428 gpio4: gpio@30230000 {
429 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
430 reg = <0x30230000 0x10000>;
431 interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
432 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000433 clocks = <&clk IMX8MM_CLK_GPIO4_ROOT>;
Peng Fan2f172312019-08-27 06:26:01 +0000434 gpio-controller;
435 #gpio-cells = <2>;
436 interrupt-controller;
437 #interrupt-cells = <2>;
Peng Fan387c4492019-10-16 10:24:30 +0000438 gpio-ranges = <&iomuxc 0 87 32>;
Peng Fan2f172312019-08-27 06:26:01 +0000439 };
440
441 gpio5: gpio@30240000 {
442 compatible = "fsl,imx8mm-gpio", "fsl,imx35-gpio";
443 reg = <0x30240000 0x10000>;
444 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
445 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000446 clocks = <&clk IMX8MM_CLK_GPIO5_ROOT>;
Peng Fan2f172312019-08-27 06:26:01 +0000447 gpio-controller;
448 #gpio-cells = <2>;
449 interrupt-controller;
450 #interrupt-cells = <2>;
Peng Fan387c4492019-10-16 10:24:30 +0000451 gpio-ranges = <&iomuxc 0 119 30>;
Peng Fan2f172312019-08-27 06:26:01 +0000452 };
453
Adam Ford15d79fc2020-12-04 17:27:46 -0600454 tmu: tmu@30260000 {
455 compatible = "fsl,imx8mm-tmu";
456 reg = <0x30260000 0x10000>;
457 clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
458 #thermal-sensor-cells = <0>;
459 };
460
Peng Fan2f172312019-08-27 06:26:01 +0000461 wdog1: watchdog@30280000 {
462 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
463 reg = <0x30280000 0x10000>;
464 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
465 clocks = <&clk IMX8MM_CLK_WDOG1_ROOT>;
466 status = "disabled";
467 };
468
469 wdog2: watchdog@30290000 {
470 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
471 reg = <0x30290000 0x10000>;
472 interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
473 clocks = <&clk IMX8MM_CLK_WDOG2_ROOT>;
474 status = "disabled";
475 };
476
477 wdog3: watchdog@302a0000 {
478 compatible = "fsl,imx8mm-wdt", "fsl,imx21-wdt";
479 reg = <0x302a0000 0x10000>;
480 interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
481 clocks = <&clk IMX8MM_CLK_WDOG3_ROOT>;
482 status = "disabled";
483 };
484
485 sdma2: dma-controller@302c0000 {
Adam Ford87372fe2020-04-27 07:11:19 -0500486 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
Peng Fan2f172312019-08-27 06:26:01 +0000487 reg = <0x302c0000 0x10000>;
488 interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
489 clocks = <&clk IMX8MM_CLK_SDMA2_ROOT>,
490 <&clk IMX8MM_CLK_SDMA2_ROOT>;
491 clock-names = "ipg", "ahb";
492 #dma-cells = <3>;
493 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
494 };
495
496 sdma3: dma-controller@302b0000 {
Adam Ford87372fe2020-04-27 07:11:19 -0500497 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
Peng Fan2f172312019-08-27 06:26:01 +0000498 reg = <0x302b0000 0x10000>;
499 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
500 clocks = <&clk IMX8MM_CLK_SDMA3_ROOT>,
501 <&clk IMX8MM_CLK_SDMA3_ROOT>;
502 clock-names = "ipg", "ahb";
503 #dma-cells = <3>;
504 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
505 };
506
507 iomuxc: pinctrl@30330000 {
508 compatible = "fsl,imx8mm-iomuxc";
509 reg = <0x30330000 0x10000>;
510 };
511
512 gpr: iomuxc-gpr@30340000 {
513 compatible = "fsl,imx8mm-iomuxc-gpr", "syscon";
514 reg = <0x30340000 0x10000>;
515 };
516
Adam Ford15d79fc2020-12-04 17:27:46 -0600517 ocotp: efuse@30350000 {
Peng Fan387c4492019-10-16 10:24:30 +0000518 compatible = "fsl,imx8mm-ocotp", "syscon";
Peng Fan2f172312019-08-27 06:26:01 +0000519 reg = <0x30350000 0x10000>;
520 clocks = <&clk IMX8MM_CLK_OCOTP_ROOT>;
521 /* For nvmem subnodes */
522 #address-cells = <1>;
523 #size-cells = <1>;
Peng Fan387c4492019-10-16 10:24:30 +0000524
525 cpu_speed_grade: speed-grade@10 {
526 reg = <0x10 4>;
527 };
Peng Fan2f172312019-08-27 06:26:01 +0000528 };
529
530 anatop: anatop@30360000 {
Adam Ford87372fe2020-04-27 07:11:19 -0500531 compatible = "fsl,imx8mm-anatop", "syscon";
Peng Fan2f172312019-08-27 06:26:01 +0000532 reg = <0x30360000 0x10000>;
533 };
534
535 snvs: snvs@30370000 {
536 compatible = "fsl,sec-v4.0-mon","syscon", "simple-mfd";
537 reg = <0x30370000 0x10000>;
538
539 snvs_rtc: snvs-rtc-lp {
540 compatible = "fsl,sec-v4.0-mon-rtc-lp";
541 regmap = <&snvs>;
542 offset = <0x34>;
543 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
544 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000545 clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
546 clock-names = "snvs-rtc";
Peng Fan2f172312019-08-27 06:26:01 +0000547 };
548
549 snvs_pwrkey: snvs-powerkey {
550 compatible = "fsl,sec-v4.0-pwrkey";
551 regmap = <&snvs>;
552 interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
Adam Ford15d79fc2020-12-04 17:27:46 -0600553 clocks = <&clk IMX8MM_CLK_SNVS_ROOT>;
554 clock-names = "snvs-pwrkey";
Peng Fan2f172312019-08-27 06:26:01 +0000555 linux,keycode = <KEY_POWER>;
556 wakeup-source;
Peng Fan387c4492019-10-16 10:24:30 +0000557 status = "disabled";
Peng Fan2f172312019-08-27 06:26:01 +0000558 };
559 };
560
561 clk: clock-controller@30380000 {
562 compatible = "fsl,imx8mm-ccm";
563 reg = <0x30380000 0x10000>;
564 #clock-cells = <1>;
565 clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>, <&clk_ext2>,
566 <&clk_ext3>, <&clk_ext4>;
567 clock-names = "osc_32k", "osc_24m", "clk_ext1", "clk_ext2",
568 "clk_ext3", "clk_ext4";
Adam Ford15d79fc2020-12-04 17:27:46 -0600569 assigned-clocks = <&clk IMX8MM_CLK_A53_SRC>,
570 <&clk IMX8MM_CLK_A53_CORE>,
571 <&clk IMX8MM_CLK_NOC>,
Peng Fan387c4492019-10-16 10:24:30 +0000572 <&clk IMX8MM_CLK_AUDIO_AHB>,
573 <&clk IMX8MM_CLK_IPG_AUDIO_ROOT>,
574 <&clk IMX8MM_SYS_PLL3>,
Adam Ford87372fe2020-04-27 07:11:19 -0500575 <&clk IMX8MM_VIDEO_PLL1>,
576 <&clk IMX8MM_AUDIO_PLL1>,
577 <&clk IMX8MM_AUDIO_PLL2>;
Adam Ford15d79fc2020-12-04 17:27:46 -0600578 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_800M>,
579 <&clk IMX8MM_ARM_PLL_OUT>,
580 <&clk IMX8MM_SYS_PLL3_OUT>,
Peng Fan387c4492019-10-16 10:24:30 +0000581 <&clk IMX8MM_SYS_PLL1_800M>;
Adam Ford15d79fc2020-12-04 17:27:46 -0600582 assigned-clock-rates = <0>, <0>, <0>,
Peng Fan387c4492019-10-16 10:24:30 +0000583 <400000000>,
584 <400000000>,
585 <750000000>,
Adam Ford87372fe2020-04-27 07:11:19 -0500586 <594000000>,
587 <393216000>,
588 <361267200>;
Peng Fan2f172312019-08-27 06:26:01 +0000589 };
590
591 src: reset-controller@30390000 {
Peng Fan387c4492019-10-16 10:24:30 +0000592 compatible = "fsl,imx8mm-src", "fsl,imx8mq-src", "syscon";
Peng Fan2f172312019-08-27 06:26:01 +0000593 reg = <0x30390000 0x10000>;
594 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
595 #reset-cells = <1>;
596 };
Marek Vasutf0e10e32021-04-02 13:14:53 +0200597
598 gpc: gpc@303a0000 {
599 compatible = "fsl,imx8mm-gpc";
600 reg = <0x303a0000 0x10000>;
601 interrupt-parent = <&gic>;
602 interrupt-controller;
603 #interrupt-cells = <3>;
604
605 pgc {
606 #address-cells = <1>;
607 #size-cells = <0>;
608
609 pgc_hsiomix: power-domain@0 {
610 #power-domain-cells = <0>;
611 reg = <IMX8MM_POWER_DOMAIN_HSIOMIX>;
612 clocks = <&clk IMX8MM_CLK_USB_BUS>;
613 };
614
615 pgc_pcie: power-domain@1 {
616 #power-domain-cells = <0>;
617 reg = <IMX8MM_POWER_DOMAIN_PCIE>;
618 power-domains = <&pgc_hsiomix>;
619 };
620
621 pgc_otg1: power-domain@2 {
622 #power-domain-cells = <0>;
623 reg = <IMX8MM_POWER_DOMAIN_OTG1>;
624 power-domains = <&pgc_hsiomix>;
625 };
626
627 pgc_otg2: power-domain@3 {
628 #power-domain-cells = <0>;
629 reg = <IMX8MM_POWER_DOMAIN_OTG2>;
630 power-domains = <&pgc_hsiomix>;
631 };
632
633 pgc_gpumix: power-domain@4 {
634 #power-domain-cells = <0>;
635 reg = <IMX8MM_POWER_DOMAIN_GPUMIX>;
636 clocks = <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
637 <&clk IMX8MM_CLK_GPU_AHB>;
638 };
639
640 pgc_gpu: power-domain@5 {
641 #power-domain-cells = <0>;
642 reg = <IMX8MM_POWER_DOMAIN_GPU>;
643 clocks = <&clk IMX8MM_CLK_GPU_AHB>,
644 <&clk IMX8MM_CLK_GPU_BUS_ROOT>,
645 <&clk IMX8MM_CLK_GPU2D_ROOT>,
646 <&clk IMX8MM_CLK_GPU3D_ROOT>;
647 resets = <&src IMX8MQ_RESET_GPU_RESET>;
648 power-domains = <&pgc_gpumix>;
649 };
650
651 dispmix_pd: power-domain@10 {
652 #power-domain-cells = <0>;
653 reg = <IMX8MM_POWER_DOMAIN_DISPMIX>;
654 clocks = <&clk IMX8MM_CLK_DISP_ROOT>,
655 <&clk IMX8MM_CLK_DISP_AXI_ROOT>,
656 <&clk IMX8MM_CLK_DISP_APB_ROOT>;
657 };
658
659 mipi_pd: power-domain@11 {
660 #power-domain-cells = <0>;
661 reg = <IMX8MM_POWER_DOMAIN_MIPI>;
662 power-domains = <&dispmix_pd>;
663 };
664 };
665 };
Peng Fan2f172312019-08-27 06:26:01 +0000666 };
667
668 aips2: bus@30400000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600669 compatible = "fsl,aips-bus", "simple-bus";
670 reg = <0x30400000 0x400000>;
Peng Fan2f172312019-08-27 06:26:01 +0000671 #address-cells = <1>;
672 #size-cells = <1>;
Peng Fan387c4492019-10-16 10:24:30 +0000673 ranges = <0x30400000 0x30400000 0x400000>;
Peng Fan2f172312019-08-27 06:26:01 +0000674
675 pwm1: pwm@30660000 {
676 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
677 reg = <0x30660000 0x10000>;
678 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
679 clocks = <&clk IMX8MM_CLK_PWM1_ROOT>,
680 <&clk IMX8MM_CLK_PWM1_ROOT>;
681 clock-names = "ipg", "per";
682 #pwm-cells = <2>;
683 status = "disabled";
684 };
685
686 pwm2: pwm@30670000 {
687 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
688 reg = <0x30670000 0x10000>;
689 interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
690 clocks = <&clk IMX8MM_CLK_PWM2_ROOT>,
691 <&clk IMX8MM_CLK_PWM2_ROOT>;
692 clock-names = "ipg", "per";
693 #pwm-cells = <2>;
694 status = "disabled";
695 };
696
697 pwm3: pwm@30680000 {
698 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
699 reg = <0x30680000 0x10000>;
700 interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
701 clocks = <&clk IMX8MM_CLK_PWM3_ROOT>,
702 <&clk IMX8MM_CLK_PWM3_ROOT>;
703 clock-names = "ipg", "per";
704 #pwm-cells = <2>;
705 status = "disabled";
706 };
707
708 pwm4: pwm@30690000 {
709 compatible = "fsl,imx8mm-pwm", "fsl,imx27-pwm";
710 reg = <0x30690000 0x10000>;
711 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
712 clocks = <&clk IMX8MM_CLK_PWM4_ROOT>,
713 <&clk IMX8MM_CLK_PWM4_ROOT>;
714 clock-names = "ipg", "per";
715 #pwm-cells = <2>;
716 status = "disabled";
717 };
Peng Fan387c4492019-10-16 10:24:30 +0000718
719 system_counter: timer@306a0000 {
720 compatible = "nxp,sysctr-timer";
721 reg = <0x306a0000 0x20000>;
722 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
723 clocks = <&osc_24m>;
724 clock-names = "per";
725 };
Peng Fan2f172312019-08-27 06:26:01 +0000726 };
727
728 aips3: bus@30800000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600729 compatible = "fsl,aips-bus", "simple-bus";
730 reg = <0x30800000 0x400000>;
Peng Fan2f172312019-08-27 06:26:01 +0000731 #address-cells = <1>;
732 #size-cells = <1>;
Adam Ford15d79fc2020-12-04 17:27:46 -0600733 ranges = <0x30800000 0x30800000 0x400000>,
734 <0x8000000 0x8000000 0x10000000>;
Peng Fan2f172312019-08-27 06:26:01 +0000735
736 ecspi1: spi@30820000 {
737 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
738 #address-cells = <1>;
739 #size-cells = <0>;
740 reg = <0x30820000 0x10000>;
741 interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
742 clocks = <&clk IMX8MM_CLK_ECSPI1_ROOT>,
743 <&clk IMX8MM_CLK_ECSPI1_ROOT>;
744 clock-names = "ipg", "per";
745 dmas = <&sdma1 0 7 1>, <&sdma1 1 7 2>;
746 dma-names = "rx", "tx";
747 status = "disabled";
748 };
749
750 ecspi2: spi@30830000 {
751 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
752 #address-cells = <1>;
753 #size-cells = <0>;
754 reg = <0x30830000 0x10000>;
755 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
756 clocks = <&clk IMX8MM_CLK_ECSPI2_ROOT>,
757 <&clk IMX8MM_CLK_ECSPI2_ROOT>;
758 clock-names = "ipg", "per";
759 dmas = <&sdma1 2 7 1>, <&sdma1 3 7 2>;
760 dma-names = "rx", "tx";
761 status = "disabled";
762 };
763
764 ecspi3: spi@30840000 {
765 compatible = "fsl,imx8mm-ecspi", "fsl,imx51-ecspi";
766 #address-cells = <1>;
767 #size-cells = <0>;
768 reg = <0x30840000 0x10000>;
769 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
770 clocks = <&clk IMX8MM_CLK_ECSPI3_ROOT>,
771 <&clk IMX8MM_CLK_ECSPI3_ROOT>;
772 clock-names = "ipg", "per";
773 dmas = <&sdma1 4 7 1>, <&sdma1 5 7 2>;
774 dma-names = "rx", "tx";
775 status = "disabled";
776 };
777
778 uart1: serial@30860000 {
779 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
780 reg = <0x30860000 0x10000>;
781 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
782 clocks = <&clk IMX8MM_CLK_UART1_ROOT>,
783 <&clk IMX8MM_CLK_UART1_ROOT>;
784 clock-names = "ipg", "per";
785 dmas = <&sdma1 22 4 0>, <&sdma1 23 4 0>;
786 dma-names = "rx", "tx";
787 status = "disabled";
788 };
789
790 uart3: serial@30880000 {
791 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
792 reg = <0x30880000 0x10000>;
793 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
794 clocks = <&clk IMX8MM_CLK_UART3_ROOT>,
795 <&clk IMX8MM_CLK_UART3_ROOT>;
796 clock-names = "ipg", "per";
797 dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>;
798 dma-names = "rx", "tx";
799 status = "disabled";
800 };
801
802 uart2: serial@30890000 {
803 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
804 reg = <0x30890000 0x10000>;
805 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
806 clocks = <&clk IMX8MM_CLK_UART2_ROOT>,
807 <&clk IMX8MM_CLK_UART2_ROOT>;
808 clock-names = "ipg", "per";
809 status = "disabled";
810 };
811
Adam Ford87372fe2020-04-27 07:11:19 -0500812 crypto: crypto@30900000 {
813 compatible = "fsl,sec-v4.0";
814 #address-cells = <1>;
815 #size-cells = <1>;
816 reg = <0x30900000 0x40000>;
817 ranges = <0 0x30900000 0x40000>;
818 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
819 clocks = <&clk IMX8MM_CLK_AHB>,
820 <&clk IMX8MM_CLK_IPG_ROOT>;
821 clock-names = "aclk", "ipg";
822
823 sec_jr0: jr@1000 {
824 compatible = "fsl,sec-v4.0-job-ring";
825 reg = <0x1000 0x1000>;
826 interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
827 };
828
829 sec_jr1: jr@2000 {
830 compatible = "fsl,sec-v4.0-job-ring";
831 reg = <0x2000 0x1000>;
832 interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
833 };
834
835 sec_jr2: jr@3000 {
836 compatible = "fsl,sec-v4.0-job-ring";
837 reg = <0x3000 0x1000>;
838 interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
839 };
840 };
841
Peng Fan2f172312019-08-27 06:26:01 +0000842 i2c1: i2c@30a20000 {
843 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
844 #address-cells = <1>;
845 #size-cells = <0>;
846 reg = <0x30a20000 0x10000>;
847 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
848 clocks = <&clk IMX8MM_CLK_I2C1_ROOT>;
849 status = "disabled";
850 };
851
852 i2c2: i2c@30a30000 {
853 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
854 #address-cells = <1>;
855 #size-cells = <0>;
856 reg = <0x30a30000 0x10000>;
857 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
858 clocks = <&clk IMX8MM_CLK_I2C2_ROOT>;
859 status = "disabled";
860 };
861
862 i2c3: i2c@30a40000 {
863 #address-cells = <1>;
864 #size-cells = <0>;
865 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
866 reg = <0x30a40000 0x10000>;
867 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
868 clocks = <&clk IMX8MM_CLK_I2C3_ROOT>;
869 status = "disabled";
870 };
871
872 i2c4: i2c@30a50000 {
873 compatible = "fsl,imx8mm-i2c", "fsl,imx21-i2c";
874 #address-cells = <1>;
875 #size-cells = <0>;
876 reg = <0x30a50000 0x10000>;
877 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
878 clocks = <&clk IMX8MM_CLK_I2C4_ROOT>;
879 status = "disabled";
880 };
881
882 uart4: serial@30a60000 {
883 compatible = "fsl,imx8mm-uart", "fsl,imx6q-uart";
884 reg = <0x30a60000 0x10000>;
885 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
886 clocks = <&clk IMX8MM_CLK_UART4_ROOT>,
887 <&clk IMX8MM_CLK_UART4_ROOT>;
888 clock-names = "ipg", "per";
889 dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>;
890 dma-names = "rx", "tx";
891 status = "disabled";
892 };
893
Adam Ford15d79fc2020-12-04 17:27:46 -0600894 mu: mailbox@30aa0000 {
895 compatible = "fsl,imx8mm-mu", "fsl,imx6sx-mu";
896 reg = <0x30aa0000 0x10000>;
897 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
898 clocks = <&clk IMX8MM_CLK_MU_ROOT>;
899 #mbox-cells = <2>;
900 };
901
Peng Fan2f172312019-08-27 06:26:01 +0000902 usdhc1: mmc@30b40000 {
903 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
904 reg = <0x30b40000 0x10000>;
905 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000906 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
Peng Fan2f172312019-08-27 06:26:01 +0000907 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
908 <&clk IMX8MM_CLK_USDHC1_ROOT>;
909 clock-names = "ipg", "ahb", "per";
Peng Fan2f172312019-08-27 06:26:01 +0000910 fsl,tuning-start-tap = <20>;
911 fsl,tuning-step= <2>;
912 bus-width = <4>;
913 status = "disabled";
914 };
915
916 usdhc2: mmc@30b50000 {
917 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
918 reg = <0x30b50000 0x10000>;
919 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000920 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
Peng Fan2f172312019-08-27 06:26:01 +0000921 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
922 <&clk IMX8MM_CLK_USDHC2_ROOT>;
923 clock-names = "ipg", "ahb", "per";
924 fsl,tuning-start-tap = <20>;
925 fsl,tuning-step= <2>;
926 bus-width = <4>;
927 status = "disabled";
928 };
929
930 usdhc3: mmc@30b60000 {
931 compatible = "fsl,imx8mm-usdhc", "fsl,imx7d-usdhc";
932 reg = <0x30b60000 0x10000>;
933 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan387c4492019-10-16 10:24:30 +0000934 clocks = <&clk IMX8MM_CLK_IPG_ROOT>,
Peng Fan2f172312019-08-27 06:26:01 +0000935 <&clk IMX8MM_CLK_NAND_USDHC_BUS>,
936 <&clk IMX8MM_CLK_USDHC3_ROOT>;
937 clock-names = "ipg", "ahb", "per";
Peng Fan2f172312019-08-27 06:26:01 +0000938 fsl,tuning-start-tap = <20>;
939 fsl,tuning-step= <2>;
940 bus-width = <4>;
941 status = "disabled";
942 };
943
Adam Ford15d79fc2020-12-04 17:27:46 -0600944 flexspi: spi@30bb0000 {
945 #address-cells = <1>;
946 #size-cells = <0>;
947 compatible = "nxp,imx8mm-fspi";
948 reg = <0x30bb0000 0x10000>, <0x8000000 0x10000000>;
949 reg-names = "fspi_base", "fspi_mmap";
950 interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
951 clocks = <&clk IMX8MM_CLK_QSPI_ROOT>,
952 <&clk IMX8MM_CLK_QSPI_ROOT>;
953 clock-names = "fspi", "fspi_en";
954 status = "disabled";
955 };
956
Peng Fan2f172312019-08-27 06:26:01 +0000957 sdma1: dma-controller@30bd0000 {
Adam Ford87372fe2020-04-27 07:11:19 -0500958 compatible = "fsl,imx8mm-sdma", "fsl,imx8mq-sdma";
Peng Fan2f172312019-08-27 06:26:01 +0000959 reg = <0x30bd0000 0x10000>;
960 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
961 clocks = <&clk IMX8MM_CLK_SDMA1_ROOT>,
Adam Ford87372fe2020-04-27 07:11:19 -0500962 <&clk IMX8MM_CLK_AHB>;
Peng Fan2f172312019-08-27 06:26:01 +0000963 clock-names = "ipg", "ahb";
964 #dma-cells = <3>;
965 fsl,sdma-ram-script-name = "imx/sdma/sdma-imx7d.bin";
966 };
967
968 fec1: ethernet@30be0000 {
969 compatible = "fsl,imx8mm-fec", "fsl,imx6sx-fec";
970 reg = <0x30be0000 0x10000>;
971 interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
972 <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
Adam Ford15d79fc2020-12-04 17:27:46 -0600973 <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
974 <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
Peng Fan2f172312019-08-27 06:26:01 +0000975 clocks = <&clk IMX8MM_CLK_ENET1_ROOT>,
976 <&clk IMX8MM_CLK_ENET1_ROOT>,
977 <&clk IMX8MM_CLK_ENET_TIMER>,
978 <&clk IMX8MM_CLK_ENET_REF>,
979 <&clk IMX8MM_CLK_ENET_PHY_REF>;
980 clock-names = "ipg", "ahb", "ptp",
981 "enet_clk_ref", "enet_out";
982 assigned-clocks = <&clk IMX8MM_CLK_ENET_AXI>,
983 <&clk IMX8MM_CLK_ENET_TIMER>,
984 <&clk IMX8MM_CLK_ENET_REF>,
985 <&clk IMX8MM_CLK_ENET_TIMER>;
986 assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_266M>,
987 <&clk IMX8MM_SYS_PLL2_100M>,
988 <&clk IMX8MM_SYS_PLL2_125M>;
989 assigned-clock-rates = <0>, <0>, <125000000>, <100000000>;
990 fsl,num-tx-queues = <3>;
991 fsl,num-rx-queues = <3>;
992 status = "disabled";
993 };
994
995 };
996
997 aips4: bus@32c00000 {
Adam Ford15d79fc2020-12-04 17:27:46 -0600998 compatible = "fsl,aips-bus", "simple-bus";
999 reg = <0x32c00000 0x400000>;
Peng Fan2f172312019-08-27 06:26:01 +00001000 #address-cells = <1>;
1001 #size-cells = <1>;
Peng Fan387c4492019-10-16 10:24:30 +00001002 ranges = <0x32c00000 0x32c00000 0x400000>;
Peng Fan2f172312019-08-27 06:26:01 +00001003
1004 usbotg1: usb@32e40000 {
1005 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1006 reg = <0x32e40000 0x200>;
1007 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
1008 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1009 clock-names = "usb1_ctrl_root_clk";
Peng Fan387c4492019-10-16 10:24:30 +00001010 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1011 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
Marek Vasutaded9402021-03-31 11:47:25 +02001012 phys = <&usbphynop1>;
Peng Fan2f172312019-08-27 06:26:01 +00001013 fsl,usbmisc = <&usbmisc1 0>;
Marek Vasutf0e10e32021-04-02 13:14:53 +02001014 power-domains = <&pgc_otg1>;
Peng Fan2f172312019-08-27 06:26:01 +00001015 status = "disabled";
1016 };
1017
Peng Fan2f172312019-08-27 06:26:01 +00001018 usbmisc1: usbmisc@32e40200 {
1019 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1020 #index-cells = <1>;
1021 reg = <0x32e40200 0x200>;
1022 };
1023
1024 usbotg2: usb@32e50000 {
1025 compatible = "fsl,imx8mm-usb", "fsl,imx7d-usb";
1026 reg = <0x32e50000 0x200>;
1027 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
1028 clocks = <&clk IMX8MM_CLK_USB1_CTRL_ROOT>;
1029 clock-names = "usb1_ctrl_root_clk";
Peng Fan387c4492019-10-16 10:24:30 +00001030 assigned-clocks = <&clk IMX8MM_CLK_USB_BUS>;
1031 assigned-clock-parents = <&clk IMX8MM_SYS_PLL2_500M>;
Marek Vasutaded9402021-03-31 11:47:25 +02001032 phys = <&usbphynop2>;
Peng Fan2f172312019-08-27 06:26:01 +00001033 fsl,usbmisc = <&usbmisc2 0>;
Marek Vasutf0e10e32021-04-02 13:14:53 +02001034 power-domains = <&pgc_otg2>;
Peng Fan2f172312019-08-27 06:26:01 +00001035 status = "disabled";
1036 };
1037
Peng Fan2f172312019-08-27 06:26:01 +00001038 usbmisc2: usbmisc@32e50200 {
1039 compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc";
1040 #index-cells = <1>;
1041 reg = <0x32e50200 0x200>;
1042 };
1043
1044 };
1045
1046 dma_apbh: dma-controller@33000000 {
1047 compatible = "fsl,imx7d-dma-apbh", "fsl,imx28-dma-apbh";
1048 reg = <0x33000000 0x2000>;
1049 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1050 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1051 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
1052 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
1053 interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3";
1054 #dma-cells = <1>;
1055 dma-channels = <4>;
1056 clocks = <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1057 };
1058
1059 gpmi: nand-controller@33002000{
1060 compatible = "fsl,imx8mm-gpmi-nand", "fsl,imx7d-gpmi-nand";
1061 #address-cells = <1>;
1062 #size-cells = <1>;
1063 reg = <0x33002000 0x2000>, <0x33004000 0x4000>;
1064 reg-names = "gpmi-nand", "bch";
1065 interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
1066 interrupt-names = "bch";
1067 clocks = <&clk IMX8MM_CLK_NAND_ROOT>,
1068 <&clk IMX8MM_CLK_NAND_USDHC_BUS_RAWNAND_CLK>;
1069 clock-names = "gpmi_io", "gpmi_bch_apb";
1070 dmas = <&dma_apbh 0>;
1071 dma-names = "rx-tx";
1072 status = "disabled";
1073 };
Peng Fan387c4492019-10-16 10:24:30 +00001074
1075 gic: interrupt-controller@38800000 {
1076 compatible = "arm,gic-v3";
1077 reg = <0x38800000 0x10000>, /* GIC Dist */
1078 <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
1079 #interrupt-cells = <3>;
1080 interrupt-controller;
1081 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
1082 };
1083
Adam Ford87372fe2020-04-27 07:11:19 -05001084 ddrc: memory-controller@3d400000 {
1085 compatible = "fsl,imx8mm-ddrc", "fsl,imx8m-ddrc";
1086 reg = <0x3d400000 0x400000>;
1087 clock-names = "core", "pll", "alt", "apb";
1088 clocks = <&clk IMX8MM_CLK_DRAM_CORE>,
1089 <&clk IMX8MM_DRAM_PLL>,
1090 <&clk IMX8MM_CLK_DRAM_ALT>,
1091 <&clk IMX8MM_CLK_DRAM_APB>;
1092 };
1093
Peng Fan387c4492019-10-16 10:24:30 +00001094 ddr-pmu@3d800000 {
1095 compatible = "fsl,imx8mm-ddr-pmu", "fsl,imx8m-ddr-pmu";
1096 reg = <0x3d800000 0x400000>;
Peng Fan387c4492019-10-16 10:24:30 +00001097 interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
1098 };
Peng Fan2f172312019-08-27 06:26:01 +00001099 };
1100};