blob: 9e85b40993e633ed098ef14e90e63874e5df6e40 [file] [log] [blame]
Pali Roháre7abe912013-03-23 14:53:08 +00001/*
2 * (C) Copyright 2011-2012 Pali Rohár <pali.rohar@gmail.com>
3 *
4 * See file CREDITS for list of people who contributed to this
5 * project.
6 *
7 * This program is free software; you can redistribute it and/or
8 * modify it under the terms of the GNU General Public License as
9 * published by the Free Software Foundation; either version 2 of
10 * the License, or (at your option) any later version.
11 *
12 * This program is distributed in the hope that it will be useful,
13 * but WITHOUT ANY WARRANTY; without even the implied warranty of
14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
15 * GNU General Public License for more details.
16 *
17 * You should have received a copy of the GNU General Public License
18 * along with this program; if not, write to the Free Software
19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
20 * MA 02111-1307 USA
21 */
22
23ANSI terminal bootmenu command
24
25The "bootmenu" command uses U-Boot menu interfaces and provides
26a simple mechanism for creating menus with different boot items.
27The cursor keys "Up" and "Down" are used for navigation through
28the items. Current active menu item is highlighted and can be
29selected using the "Enter" key. The selection of the highlighted
30menu entry invokes an U-Boot command (or a list of commands)
31associated with this menu entry.
32
33The "bootmenu" command interprets ANSI escape sequencies, so
34an ANSI terminal is required for proper menu rendering and item
35selection.
36
37The assembling of the menu is done via a set of environment variables
38"bootmenu_<num>" and "bootmenu_delay", i.e.:
39
40 bootmenu_delay=<delay>
41 bootmenu_<num>="<title>=<commands>"
42
43 <delay> is the autoboot delay in seconds, after which the first
44 menu entry will be selected automatically
45
46 <num> is the boot menu entry number, starting from zero
47
48 <title> is the text of the menu entry shown on the console
49 or on the boot screen
50
51 <commands> are commands which will be executed when a menu
52 entry is selected
53
54 (title and commands are separated by first appearance of '='
55 character in the environment variable)
56
57First (optional) argument of the "bootmenu" command is a delay specifier
58and it overrides the delay value defined by "bootmenu_delay" environment
59variable. If the environment variable "bootmenu_delay" is not set or if
60the argument of the "bootmenu" command is not specified, the default delay
61will be CONFIG_BOOTDELAY. If delay is 0, no menu entries will be shown on
62the console (or on the screen) and the command of the first menu entry will
63be called immediately. If delay is less then 0, bootmenu will be shown and
64autoboot will be disabled.
65
66Bootmenu always adds menu entry "U-Boot console" at the end of all menu
67entries specified by environment variables. When selecting this entry
68the bootmenu terminates and the usual U-Boot command prompt is presented
69to the user.
70
71Example environment:
72
73 setenv bootmenu_0 Boot 1. kernel=bootm 0x82000000 # Set first menu entry
74 setenv bootmenu_1 Boot 2. kernel=bootm 0x83000000 # Set second menu entry
75 setenv bootmenu_2 Reset board=reset # Set third menu entry
76 setenv bootmenu_3 U-Boot boot order=boot # Set fourth menu entry
77 bootmenu 20 # Run bootmenu with autoboot delay 20s
78
79
80The above example will be rendered as below
81(without decorating rectangle):
82
83┌──────────────────────────────────────────┐
84
85 *** U-Boot Boot Menu ***
86
87 Boot 1. kernel
88 Boot 2. kernel
89 Reset board
90 U-Boot boot order
91 U-Boot console
92
93 Hit any key to stop autoboot: 20
94 Press UP/DOWN to move, ENTER to select
95
96└──────────────────────────────────────────┘
97
98Selected menu entry will be highlighted - it will have inverted
99background and text colors.
100
101To enable the "bootmenu" command add following definitions to the
102board config file:
103
104 #define CONFIG_CMD_BOOTMENU
105 #define CONFIG_MENU
106
107To run the bootmenu at startup add these additional definitions:
108
109 #define CONFIG_AUTOBOOT_KEYED
110 #define CONFIG_BOOTDELAY 30
111 #define CONFIG_MENU_SHOW
112
113When you intend to use the bootmenu on color frame buffer console,
114make sure to additionally define CONFIG_CFB_CONSOLE_ANSI in the
115board config file.