blob: 38d473de4298503ba5fe53d7a36a5ffefaa2b618 [file] [log] [blame]
Dirk Eibacha605ea72010-10-21 10:50:05 +02001/*
2 * (C) Copyright 2010
3 * Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
4 *
Wolfgang Denk3765b3e2013-10-07 13:07:26 +02005 * SPDX-License-Identifier: GPL-2.0+
Dirk Eibacha605ea72010-10-21 10:50:05 +02006 */
7
8#ifndef __CONFIG_H
9#define __CONFIG_H
10
11#define CONFIG_405EP 1 /* this is a PPC405 CPU */
Dirk Eibacha605ea72010-10-21 10:50:05 +020012#define CONFIG_IOCON 1 /* on a IoCon board */
13
14#define CONFIG_SYS_TEXT_BASE 0xFFFC0000
15
16/*
17 * Include common defines/options for all AMCC eval boards
18 */
19#define CONFIG_HOSTNAME iocon
Dirk Eibachcccd4f42014-07-03 09:28:20 +020020#define CONFIG_IDENT_STRING " iocon 0.06"
Dirk Eibacha605ea72010-10-21 10:50:05 +020021#include "amcc-common.h"
22
Dirk Eibach6e9e6c32012-04-26 03:54:22 +000023#define CONFIG_BOARD_EARLY_INIT_F
24#define CONFIG_BOARD_EARLY_INIT_R
Dirk Eibacha605ea72010-10-21 10:50:05 +020025#define CONFIG_LAST_STAGE_INIT
Dirk Eibachd9f923f2014-07-25 10:10:24 +020026#define CONFIG_SYS_GENERIC_BOARD
Dirk Eibacha605ea72010-10-21 10:50:05 +020027
28#define CONFIG_SYS_CLK_FREQ 33333333 /* external frequency to pll */
29
30/*
31 * Configure PLL
32 */
33#define PLLMR0_DEFAULT PLLMR0_266_133_66
34#define PLLMR1_DEFAULT PLLMR1_266_133_66
35
Dirk Eibach996d88d2012-04-26 03:54:25 +000036#undef CONFIG_ZERO_BOOTDELAY_CHECK /* ignore keypress on bootdelay==0 */
37#define CONFIG_AUTOBOOT_KEYED /* use key strings to stop autoboot */
38#define CONFIG_AUTOBOOT_STOP_STR " "
39
Dirk Eibacha605ea72010-10-21 10:50:05 +020040/* new uImage format support */
41#define CONFIG_FIT
42#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
Dirk Eibach9a4f4792014-07-03 09:28:26 +020043#define CONFIG_FIT_DISABLE_SHA256
Dirk Eibacha605ea72010-10-21 10:50:05 +020044
45#define CONFIG_ENV_IS_IN_FLASH /* use FLASH for environment vars */
46
47/*
48 * Default environment variables
49 */
50#define CONFIG_EXTRA_ENV_SETTINGS \
51 CONFIG_AMCC_DEF_ENV \
52 CONFIG_AMCC_DEF_ENV_POWERPC \
53 CONFIG_AMCC_DEF_ENV_NOR_UPD \
54 "kernel_addr=fc000000\0" \
55 "fdt_addr=fc1e0000\0" \
56 "ramdisk_addr=fc200000\0" \
57 ""
58
59#define CONFIG_PHY_ADDR 4 /* PHY address */
60#define CONFIG_HAS_ETH0
61#define CONFIG_PHY_CLK_FREQ EMAC_STACR_CLK_66MHZ
62
63/*
64 * Commands additional to the ones defined in amcc-common.h
65 */
66#define CONFIG_CMD_CACHE
Michal Simek7d2357c2014-06-17 00:36:14 +020067#define CONFIG_CMD_FPGAD
Dirk Eibacha605ea72010-10-21 10:50:05 +020068#undef CONFIG_CMD_EEPROM
Dirk Eibach4fb9b412014-07-03 09:28:25 +020069#undef CONFIG_CMD_ELF
70#undef CONFIG_CMD_I2C
71#undef CONFIG_CMD_IRQ
72#undef CONFIG_CMD_NFS
Dirk Eibacha605ea72010-10-21 10:50:05 +020073
74/*
75 * SDRAM configuration (please see cpu/ppc/sdram.[ch])
76 */
77#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
78
79/* SDRAM timings used in datasheet */
80#define CONFIG_SYS_SDRAM_CL 3 /* CAS latency */
81#define CONFIG_SYS_SDRAM_tRP 20 /* PRECHARGE command period */
82#define CONFIG_SYS_SDRAM_tRC 66 /* ACTIVE-to-ACTIVE period */
83#define CONFIG_SYS_SDRAM_tRCD 20 /* ACTIVE-to-READ delay */
84#define CONFIG_SYS_SDRAM_tRFC 66 /* Auto refresh period */
85
86/*
87 * If CONFIG_SYS_EXT_SERIAL_CLOCK, then the UART divisor is 1.
88 * If CONFIG_SYS_405_UART_ERRATA_59, then UART divisor is 31.
89 * Otherwise, UART divisor is determined by CPU Clock and CONFIG_SYS_BASE_BAUD.
90 * The Linux BASE_BAUD define should match this configuration.
91 * baseBaud = cpuClock/(uartDivisor*16)
92 * If CONFIG_SYS_405_UART_ERRATA_59 and 200MHz CPU clock,
93 * set Linux BASE_BAUD to 403200.
94 */
95#define CONFIG_CONS_INDEX 1 /* Use UART0 */
96#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* external serial clock */
97#undef CONFIG_SYS_405_UART_ERRATA_59 /* 405GP/CR Rev. D silicon */
98#define CONFIG_SYS_BASE_BAUD 691200
99
100/*
101 * I2C stuff
102 */
Heiko Schocherea818db2013-01-29 08:53:15 +0100103#define CONFIG_SYS_I2C
Dirk Eibach880540d2013-04-25 02:40:01 +0000104#define CONFIG_SYS_I2C_PPC4XX
105#define CONFIG_SYS_I2C_PPC4XX_CH0
106#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000
107#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
Dirk Eibachb46226b2014-07-03 09:28:18 +0200108#define CONFIG_SYS_I2C_IHS
Dirk Eibacha605ea72010-10-21 10:50:05 +0200109
Dirk Eibache50e8962013-07-25 19:28:13 +0200110#define CONFIG_SYS_I2C_SPEED 400000
Dirk Eibachb46226b2014-07-03 09:28:18 +0200111#define CONFIG_SYS_SPD_BUS_NUM 4
Dirk Eibache50e8962013-07-25 19:28:13 +0200112
113#define CONFIG_PCA953X /* NXP PCA9554 */
114#define CONFIG_PCA9698 /* NXP PCA9698 */
115
Dirk Eibachb46226b2014-07-03 09:28:18 +0200116#define CONFIG_SYS_I2C_IHS_CH0
117#define CONFIG_SYS_I2C_IHS_SPEED_0 50000
118#define CONFIG_SYS_I2C_IHS_SLAVE_0 0x7F
119#define CONFIG_SYS_I2C_IHS_CH1
120#define CONFIG_SYS_I2C_IHS_SPEED_1 50000
121#define CONFIG_SYS_I2C_IHS_SLAVE_1 0x7F
122#define CONFIG_SYS_I2C_IHS_CH2
123#define CONFIG_SYS_I2C_IHS_SPEED_2 50000
124#define CONFIG_SYS_I2C_IHS_SLAVE_2 0x7F
125#define CONFIG_SYS_I2C_IHS_CH3
126#define CONFIG_SYS_I2C_IHS_SPEED_3 50000
127#define CONFIG_SYS_I2C_IHS_SLAVE_3 0x7F
128
Dirk Eibacha605ea72010-10-21 10:50:05 +0200129/*
130 * Software (bit-bang) I2C driver configuration
131 */
Dirk Eibache50e8962013-07-25 19:28:13 +0200132#define CONFIG_SYS_I2C_SOFT
133#define CONFIG_SYS_I2C_SOFT_SPEED 50000
134#define CONFIG_SYS_I2C_SOFT_SLAVE 0x7F
135#define I2C_SOFT_DECLARATIONS2
136#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
137#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x7F
138#define I2C_SOFT_DECLARATIONS3
139#define CONFIG_SYS_I2C_SOFT_SPEED_3 50000
140#define CONFIG_SYS_I2C_SOFT_SLAVE_3 0x7F
141#define I2C_SOFT_DECLARATIONS4
142#define CONFIG_SYS_I2C_SOFT_SPEED_4 50000
143#define CONFIG_SYS_I2C_SOFT_SLAVE_4 0x7F
144
Dirk Eibachb46226b2014-07-03 09:28:18 +0200145#define CONFIG_SYS_ICS8N3QV01_I2C {5, 6, 7, 8}
146#define CONFIG_SYS_CH7301_I2C {5, 6, 7, 8}
147#define CONFIG_SYS_DP501_I2C {0, 1, 2, 3}
Dirk Eibacha605ea72010-10-21 10:50:05 +0200148
149#ifndef __ASSEMBLY__
Dirk Eibache50e8962013-07-25 19:28:13 +0200150void fpga_gpio_set(unsigned int bus, int pin);
151void fpga_gpio_clear(unsigned int bus, int pin);
152int fpga_gpio_get(unsigned int bus, int pin);
Dirk Eibacha605ea72010-10-21 10:50:05 +0200153#endif
154
155#define I2C_ACTIVE { }
156#define I2C_TRISTATE { }
Dirk Eibache50e8962013-07-25 19:28:13 +0200157#define I2C_READ \
158 (fpga_gpio_get(I2C_ADAP_HWNR, 0x0040) ? 1 : 0)
159#define I2C_SDA(bit) \
160 do { \
161 if (bit) \
162 fpga_gpio_set(I2C_ADAP_HWNR, 0x0040); \
163 else \
164 fpga_gpio_clear(I2C_ADAP_HWNR, 0x0040); \
165 } while (0)
166#define I2C_SCL(bit) \
167 do { \
168 if (bit) \
169 fpga_gpio_set(I2C_ADAP_HWNR, 0x0020); \
170 else \
171 fpga_gpio_clear(I2C_ADAP_HWNR, 0x0020); \
172 } while (0)
Dirk Eibacha605ea72010-10-21 10:50:05 +0200173#define I2C_DELAY udelay(25) /* 1/4 I2C clock duration */
174
175/*
176 * FLASH organization
177 */
178#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
179#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
180
181#define CONFIG_SYS_FLASH_BASE 0xFC000000
182#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
183
184#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */
185#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sectors per chip*/
186
187#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase/ms */
188#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write/ms */
189
190#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buff'd writes */
Dirk Eibacha605ea72010-10-21 10:50:05 +0200191
192#define CONFIG_SYS_FLASH_EMPTY_INFO /* 'E' for empty sector on flinfo */
193#define CONFIG_SYS_FLASH_QUIET_TEST 1 /* no warn upon unknown flash */
194
195#ifdef CONFIG_ENV_IS_IN_FLASH
196#define CONFIG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */
197#define CONFIG_ENV_ADDR ((-CONFIG_SYS_MONITOR_LEN)-CONFIG_ENV_SECT_SIZE)
198#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
199
200/* Address and size of Redundant Environment Sector */
201#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR-CONFIG_ENV_SECT_SIZE)
202#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
203#endif
204
205/*
206 * PPC405 GPIO Configuration
207 */
208#define CONFIG_SYS_4xx_GPIO_TABLE { /* GPIO Alternate1 */ \
209{ \
210/* GPIO Core 0 */ \
211{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO0 PerBLast */ \
212{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO1 TS1E */ \
213{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO2 TS2E */ \
214{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO3 TS1O */ \
215{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO4 TS2O */ \
216{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_1 }, /* GPIO5 TS3 */ \
217{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO6 TS4 */ \
218{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO7 TS5 */ \
219{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO8 TS6 */ \
220{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO9 TrcClk */ \
221{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO10 PerCS1 */ \
222{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO11 PerCS2 */ \
223{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO12 PerCS3 */ \
224{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO13 PerCS4 */ \
225{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO14 PerAddr03 */ \
226{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO15 PerAddr04 */ \
227{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO16 PerAddr05 */ \
228{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO17 IRQ0 */ \
229{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO18 IRQ1 */ \
230{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO19 IRQ2 */ \
231{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO20 IRQ3 */ \
232{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO21 IRQ4 */ \
233{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO22 IRQ5 */ \
234{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO23 IRQ6 */ \
235{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO24 UART0_DCD */ \
236{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO25 UART0_DSR */ \
237{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO26 UART0_RI */ \
238{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO27 UART0_DTR */ \
239{ GPIO_BASE, GPIO_IN, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO28 UART1_Rx */ \
240{ GPIO_BASE, GPIO_OUT, GPIO_ALT1, GPIO_OUT_NO_CHG }, /* GPIO29 UART1_Tx */ \
241{ GPIO_BASE, GPIO_OUT, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO30 RejectPkt0 */ \
242{ GPIO_BASE, GPIO_IN, GPIO_SEL, GPIO_OUT_NO_CHG }, /* GPIO31 RejectPkt1 */ \
243} \
244}
245
246/*
247 * Definitions for initial stack pointer and data area (in data cache)
248 */
249/* use on chip memory (OCM) for temperary stack until sdram is tested */
250#define CONFIG_SYS_TEMP_STACK_OCM 1
251
252/* On Chip Memory location */
253#define CONFIG_SYS_OCM_DATA_ADDR 0xF8000000
254#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
255#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* in SDRAM */
256#define CONFIG_SYS_INIT_RAM_END CONFIG_SYS_OCM_DATA_SIZE /* End of used area */
257
Dirk Eibacha605ea72010-10-21 10:50:05 +0200258#define CONFIG_SYS_GBL_DATA_OFFSET \
Masahiro Yamada627b73e2014-02-07 09:23:03 +0900259 (CONFIG_SYS_INIT_RAM_END - GENERATED_GBL_DATA_SIZE)
Dirk Eibacha605ea72010-10-21 10:50:05 +0200260#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
261
262/*
263 * External Bus Controller (EBC) Setup
264 */
265
266/* Memory Bank 0 (NOR-FLASH) initialization */
267#define CONFIG_SYS_EBC_PB0AP 0xa382a880
268#define CONFIG_SYS_EBC_PB0CR 0xFC0DA000
269
270/* Memory Bank 1 (NVRAM) initializatio */
271#define CONFIG_SYS_EBC_PB1AP 0x92015480
272#define CONFIG_SYS_EBC_PB1CR 0xFB858000
273
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100274/* Memory Bank 2 (FPGA0) initialization */
275#define CONFIG_SYS_FPGA0_BASE 0x7f100000
Dirk Eibacha605ea72010-10-21 10:50:05 +0200276#define CONFIG_SYS_EBC_PB2AP 0x02825080
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100277#define CONFIG_SYS_EBC_PB2CR (CONFIG_SYS_FPGA0_BASE | 0x1a000)
Dirk Eibacha605ea72010-10-21 10:50:05 +0200278
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100279#define CONFIG_SYS_FPGA_BASE(k) CONFIG_SYS_FPGA0_BASE
280#define CONFIG_SYS_FPGA_DONE(k) 0x0010
281
282#define CONFIG_SYS_FPGA_COUNT 1
Dirk Eibacha605ea72010-10-21 10:50:05 +0200283
Dirk Eibache50e8962013-07-25 19:28:13 +0200284#define CONFIG_SYS_MCLINK_MAX 3
Dirk Eibachaba27ac2013-06-26 16:04:26 +0200285
Dirk Eibache50e8962013-07-25 19:28:13 +0200286#define CONFIG_SYS_FPGA_PTR \
287 { (struct ihs_fpga *)CONFIG_SYS_FPGA0_BASE, NULL, NULL, NULL }
Dirk Eibachaba27ac2013-06-26 16:04:26 +0200288
Dirk Eibacha605ea72010-10-21 10:50:05 +0200289/* Memory Bank 3 (Latches) initialization */
290#define CONFIG_SYS_LATCH_BASE 0x7f200000
291#define CONFIG_SYS_EBC_PB3AP 0x02025080
292#define CONFIG_SYS_EBC_PB3CR 0x7f21a000
293
294#define CONFIG_SYS_LATCH0_RESET 0xffef
295#define CONFIG_SYS_LATCH0_BOOT 0xffff
296#define CONFIG_SYS_LATCH1_RESET 0xffff
297#define CONFIG_SYS_LATCH1_BOOT 0xffff
298
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100299/*
300 * OSD Setup
301 */
302#define CONFIG_SYS_MPC92469AC
Dirk Eibache50e8962013-07-25 19:28:13 +0200303#define CONFIG_SYS_OSD_SCREENS 1
Dirk Eibachedfe9fe2014-07-03 09:28:17 +0200304#define CONFIG_SYS_DP501_DIFFERENTIAL
305#define CONFIG_SYS_DP501_VCAPCTRL0 0x01 /* DDR mode 0, DE for H/VSYNC */
Dirk Eibache50e8962013-07-25 19:28:13 +0200306
307#define CONFIG_BITBANGMII /* bit-bang MII PHY management */
308#define CONFIG_BITBANGMII_MULTI
Dirk Eibach2da0fc02011-01-21 09:31:21 +0100309
Dirk Eibacha605ea72010-10-21 10:50:05 +0200310#endif /* __CONFIG_H */