blob: 46a42b30874492f970aabf6b0420ea11d57d7dbc [file] [log] [blame]
Eric Cooper38041db2010-11-24 17:11:32 +05301/*
2 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu>
3 *
4 * Based on sheevaplug.h originally written by
5 * Prafulla Wadaskar <prafulla@marvell.com>
6 * (C) Copyright 2009
7 * Marvell Semiconductor <www.marvell.com>
8 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02009 * SPDX-License-Identifier: GPL-2.0+
Eric Cooper38041db2010-11-24 17:11:32 +053010 */
11
12#ifndef _CONFIG_DOCKSTAR_H
13#define _CONFIG_DOCKSTAR_H
14
15/*
16 * Version number information
17 */
18#define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar"
19
20/*
21 * High Level Configuration Options (easy to change)
22 */
23#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
Eric Cooper38041db2010-11-24 17:11:32 +053024#define CONFIG_KW88F6281 1 /* SOC Name */
25#define CONFIG_MACH_DOCKSTAR /* Machine type */
26#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
27
28/*
29 * Commands configuration
30 */
31#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
32#include <config_cmd_default.h>
33#define CONFIG_CMD_DHCP
34#define CONFIG_CMD_ENV
35#define CONFIG_CMD_MII
36#define CONFIG_CMD_NAND
37#define CONFIG_CMD_PING
38#define CONFIG_CMD_USB
39/*
40 * mv-common.h should be defined after CMD configs since it used them
41 * to enable certain macros
42 */
43#include "mv-common.h"
44
45#undef CONFIG_SYS_PROMPT /* previously defined in mv-common.h */
46#define CONFIG_SYS_PROMPT "DockStar> " /* Command Prompt */
47
48/*
49 * Environment variables configurations
50 */
51#ifdef CONFIG_CMD_NAND
52#define CONFIG_ENV_IS_IN_NAND 1
53#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
54#else
55#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
56#endif
57/*
58 * max 4k env size is enough, but in case of nand
59 * it has to be rounded to sector size
60 */
61#define CONFIG_ENV_SIZE 0x20000 /* 128k */
62#define CONFIG_ENV_ADDR 0x60000
63#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
64
65/*
66 * Default environment variables
67 */
68#define CONFIG_BOOTCOMMAND \
69 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \
70 "ubi part root; " \
Joe Hershberger949a7712012-11-01 16:54:18 +000071 "ubifsmount ubi:root; " \
Eric Cooper38041db2010-11-24 17:11:32 +053072 "ubifsload 0x800000 ${kernel}; " \
73 "ubifsload 0x1100000 ${initrd}; " \
74 "bootm 0x800000 0x1100000"
75
76#define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0"
77
78#define CONFIG_EXTRA_ENV_SETTINGS \
79 "console=console=ttyS0,115200\0" \
80 "mtdids=nand0=orion_nand\0" \
81 "mtdparts="CONFIG_MTDPARTS \
82 "kernel=/boot/uImage\0" \
83 "initrd=/boot/uInitrd\0" \
84 "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0"
85
86/*
87 * Ethernet Driver configuration
88 */
89#ifdef CONFIG_CMD_NET
90#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
91#define CONFIG_PHY_BASE_ADR 0
92#endif /* CONFIG_CMD_NET */
93
94/*
95 * File system
96 */
97#define CONFIG_CMD_EXT2
98#define CONFIG_CMD_FAT
99#define CONFIG_CMD_JFFS2
100#define CONFIG_CMD_UBI
101#define CONFIG_CMD_UBIFS
102#define CONFIG_RBTREE
103#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
104#define CONFIG_MTD_PARTITIONS
105#define CONFIG_CMD_MTDPARTS
106#define CONFIG_LZO
107
108#endif /* _CONFIG_DOCKSTAR_H */