blob: b51df00da701e5469ee9c489f5c63bf7390d6037 [file] [log] [blame]
Nicolas Ferre89a7a872008-12-06 13:11:14 +01001Atmel AT91 Evaluation kits
2
3http://atmel.com/dyn/products/tools.asp?family_id=605#1443
4
Jean-Christophe PLAGNIOL-VILLARD843a2652009-03-27 23:26:42 +01005I. Board mapping & boot media
Nicolas Ferre89a7a872008-12-06 13:11:14 +01006------------------------------------------------------------------------------
Nicolas Ferredf486b12009-03-22 14:48:16 +01007AT91SAM9260EK, AT91SAM9G20EK & AT91SAM9XEEK
Nicolas Ferre89a7a872008-12-06 13:11:14 +01008------------------------------------------------------------------------------
9
10Memory map
11 0x20000000 - 23FFFFFF SDRAM (64 MB)
12 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J13)
13 0xD0000000 - Dxxxxxxx Soldered Atmel Dataflash
14
15Environment variables
16
17 U-Boot environment variables can be stored at different places:
18 - Dataflash on SPI chip select 1 (default)
19 - Dataflash on SPI chip select 0 (dataflash card)
20 - Nand flash.
21
22 You can choose your storage location at config step (here for at91sam9260ek) :
23 make at91sam9260ek_config - use data flash (spi cs1) (default)
24 make at91sam9260ek_nandflash_config - use nand flash
25 make at91sam9260ek_dataflash_cs0_config - use data flash (spi cs0)
26 make at91sam9260ek_dataflash_cs1_config - use data flash (spi cs1)
27
28
29------------------------------------------------------------------------------
Sedji Gaouaou5ccc2d92009-06-25 17:04:15 +020030AT91SAM9261EK, AT91SAM9G10EK
Nicolas Ferre89a7a872008-12-06 13:11:14 +010031------------------------------------------------------------------------------
32
33Memory map
34 0x20000000 - 23FFFFFF SDRAM (64 MB)
35 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
36 0xD0000000 - Dxxxxxxx Atmel Dataflash card (J22)
37
38Environment variables
39
40 U-Boot environment variables can be stored at different places:
41 - Dataflash on SPI chip select 0 (default)
42 - Dataflash on SPI chip select 3 (dataflash card)
43 - Nand flash.
44
45 You can choose your storage location at config step (here for at91sam9260ek) :
46 make at91sam9261ek_config - use data flash (spi cs0) (default)
47 make at91sam9261ek_nandflash_config - use nand flash
48 make at91sam9261ek_dataflash_cs0_config - use data flash (spi cs0)
49 make at91sam9261ek_dataflash_cs3_config - use data flash (spi cs3)
50
51
52------------------------------------------------------------------------------
53AT91SAM9263EK
54------------------------------------------------------------------------------
55
56Memory map
57 0x20000000 - 23FFFFFF SDRAM (64 MB)
58 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J9)
59
60Environment variables
61
62 U-Boot environment variables can be stored at different places:
63 - Dataflash on SPI chip select 0 (dataflash card)
64 - Nand flash.
Thomas Weberc46bf092012-03-24 22:44:01 +000065 - Nor flash (not populate by default)
Nicolas Ferre89a7a872008-12-06 13:11:14 +010066
67 You can choose your storage location at config step (here for at91sam9260ek) :
68 make at91sam9263ek_config - use data flash (spi cs0) (default)
69 make at91sam9263ek_nandflash_config - use nand flash
70 make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
Thomas Weberc46bf092012-03-24 22:44:01 +000071 make at91sam9263ek_norflash_config - use nor flash
Jean-Christophe PLAGNIOL-VILLARD1b3b7c62009-06-13 12:48:36 +020072
73 You can choose to boot directly from U-Boot at config step
Thomas Weberc46bf092012-03-24 22:44:01 +000074 make at91sam9263ek_norflash_boot_config - boot from nor flash
Nicolas Ferre89a7a872008-12-06 13:11:14 +010075
76
77------------------------------------------------------------------------------
Sedji Gaouaou22ee6472009-07-09 10:16:29 +020078AT91SAM9M10G45EK
79------------------------------------------------------------------------------
80
81Memory map
82 0x20000000 - 23FFFFFF SDRAM (64 MB)
83 0xC0000000 - Cxxxxxxx Atmel Dataflash card (J12)
84
85Environment variables
86
87 U-Boot environment variables can be stored at different places:
88 - Dataflash on SPI chip select 0 (dataflash card)
89 - Nand flash.
90
91 You can choose your storage location at config step (here for at91sam9m10g45ek) :
92 make at91sam9m10g45ek_config - use data flash (spi cs0) (default)
93 make at91sam9m10g45ek_nandflash_config - use nand flash
94 make at91sam9m10g45ek_dataflash_cs0_config - use data flash (spi cs0)
95
96
97------------------------------------------------------------------------------
Nicolas Ferre89a7a872008-12-06 13:11:14 +010098AT91SAM9RLEK
99------------------------------------------------------------------------------
100
101Memory map
102 0x20000000 - 23FFFFFF SDRAM (64 MB)
103 0xC0000000 - Cxxxxxxx Soldered Atmel Dataflash
104
105Environment variables
106
107 U-Boot environment variables can be stored at different places:
108 - Dataflash on SPI chip select 0
109 - Nand flash.
110
111 You can choose your storage location at config step (here for at91sam9260ek) :
112 make at91sam9263ek_config - use data flash (spi cs0) (default)
113 make at91sam9263ek_nandflash_config - use nand flash
114 make at91sam9263ek_dataflash_cs0_config - use data flash (spi cs0)
Jean-Christophe PLAGNIOL-VILLARD843a2652009-03-27 23:26:42 +0100115
116II. Watchdog support
117
118 For security reasons, the at91 watchdog is running at boot time and,
119 if deactivated, cannot be used anymore.
120 If you want to use the watchdog, you will need to keep it running in
121 your code (make sure not to disable it in AT91Bootstrap for instance).
122
123 In the U-Boot configuration, the AT91 watchdog support is enabled using
124 the CONFIG_AT91SAM9_WATCHDOG and CONFIG_HW_WATCHDOG options.