Gitiles
Code Review Sign In
gerrit.devboardsforandroid.linaro.org / platform / external / u-boot / e327e2affd302b7fd15b655624fdacb2f0492eab / . / arch / arm / dts / imx6ul-imx6ull-opos6uldev.dtsi
blob: 18cac19aa9b0f8e00a497da6bf9752e1b4807a09 [file] [log] [blame]
Marcel Ziswiler5d7a95f2022-07-21 15:27:30 +0200[diff] [blame]1// SPDX-License-Identifier: GPL-2.0 OR MIT
2//
3// Copyright 2019 Armadeus Systems <support@armadeus.com>
4
5/ {
6 chosen {
7 stdout-path = &uart1;
8 };
9
10 backlight: backlight {
11 compatible = "pwm-backlight";
12 pwms = <&pwm3 0 191000>;
13 brightness-levels = <0 4 8 16 32 64 128 255>;
14 default-brightness-level = <7>;
15 power-supply = <&reg_5v>;
16 status = "okay";
17 };
18
19 gpio-keys {
20 compatible = "gpio-keys";
21 pinctrl-names = "default";
22 pinctrl-0 = <&pinctrl_gpio_keys>;
23
24 user-button {
25 label = "User button";
26 gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
27 linux,code = <BTN_MISC>;
28 wakeup-source;
29 };
30 };
31
32 leds {
33 compatible = "gpio-leds";
34
35 user-led {
36 label = "User";
37 pinctrl-names = "default";
38 pinctrl-0 = <&pinctrl_led>;
39 gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
40 linux,default-trigger = "heartbeat";
41 };
42 };
43
44 onewire {
45 compatible = "w1-gpio";
46 pinctrl-names = "default";
47 pinctrl-0 = <&pinctrl_w1>;
48 gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
49 };
50
51 panel: panel {
52 compatible = "armadeus,st0700-adapt";
53 power-supply = <&reg_3v3>;
54 backlight = <&backlight>;
55
56 port {
57 panel_in: endpoint {
58 remote-endpoint = <&lcdif_out>;
59 };
60 };
61 };
62
63 reg_5v: regulator-5v {
64 compatible = "regulator-fixed";
65 regulator-name = "5V";
66 regulator-min-microvolt = <5000000>;
67 regulator-max-microvolt = <5000000>;
68 };
69
70 reg_usbotg1_vbus: regulator-usbotg1vbus {
71 compatible = "regulator-fixed";
72 regulator-name = "usbotg1vbus";
73 regulator-min-microvolt = <5000000>;
74 regulator-max-microvolt = <5000000>;
75 pinctrl-names = "default";
76 pinctrl-0 = <&pinctrl_usbotg1_vbus>;
77 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
78 enable-active-high;
79 };
80
81 reg_usbotg2_vbus: regulator-usbotg2vbus {
82 compatible = "regulator-fixed";
83 regulator-name = "usbotg2vbus";
84 regulator-min-microvolt = <5000000>;
85 regulator-max-microvolt = <5000000>;
86 pinctrl-names = "default";
87 pinctrl-0 = <&pinctrl_usbotg2_vbus>;
88 gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
89 enable-active-high;
90 };
91};
92
93&adc1 {
94 vref-supply = <&reg_3v3>;
95 status = "okay";
96};
97
98&can1 {
99 pinctrl-names = "default";
100 pinctrl-0 = <&pinctrl_flexcan1>;
101 xceiver-supply = <&reg_5v>;
102 status = "okay";
103};
104
105&can2 {
106 pinctrl-names = "default";
107 pinctrl-0 = <&pinctrl_flexcan2>;
108 xceiver-supply = <&reg_5v>;
109 status = "okay";
110};
111
112&ecspi4 {
113 pinctrl-names = "default";
114 pinctrl-0 = <&pinctrl_ecspi4>;
115 cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
116 status = "okay";
117};
118
119&i2c1 {
120 pinctrl-names = "default";
121 pinctrl-0 = <&pinctrl_i2c1>;
122 clock-frequency = <400000>;
123 status = "okay";
124};
125
126&i2c2 {
127 pinctrl-names = "default";
128 pinctrl-0 = <&pinctrl_i2c2>;
129 clock-frequency = <400000>;
130 status = "okay";
131};
132
133&lcdif {
134 pinctrl-names = "default";
135 pinctrl-0 = <&pinctrl_lcdif>;
136 status = "okay";
137
138 port {
139 lcdif_out: endpoint {
140 remote-endpoint = <&panel_in>;
141 };
142 };
143};
144
145&pwm3 {
146 #pwm-cells = <2>;
147 pinctrl-names = "default";
148 pinctrl-0 = <&pinctrl_pwm3>;
149 status = "okay";
150};
151
152&snvs_pwrkey {
153 status = "disabled";
154};
155
156&tsc {
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_tsc>;
159 xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
160 measure-delay-time = <0xffff>;
161 pre-charge-time = <0xffff>;
162 status = "okay";
163};
164
165&uart1 {
166 pinctrl-names = "default";
167 pinctrl-0 = <&pinctrl_uart1>;
168 status = "okay";
169};
170
171&uart2 {
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_uart2>;
174 status = "okay";
175};
176
177&usbotg1 {
178 pinctrl-names = "default";
179 pinctrl-0 = <&pinctrl_usbotg1_id>;
180 vbus-supply = <&reg_usbotg1_vbus>;
181 dr_mode = "otg";
182 disable-over-current;
183 status = "okay";
184};
185
186&usbotg2 {
187 vbus-supply = <&reg_usbotg2_vbus>;
188 dr_mode = "host";
189 disable-over-current;
190 status = "okay";
191};
192
193&iomuxc {
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_gpios>;
196
197 pinctrl_ecspi4: ecspi4grp {
198 fsl,pins = <
199 MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
200 MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
201 MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
202 MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
203 MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
204 >;
205 };
206
207 pinctrl_flexcan1: flexcan1grp {
208 fsl,pins = <
209 MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
210 MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
211 >;
212 };
213
214 pinctrl_flexcan2: flexcan2grp {
215 fsl,pins = <
216 MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
217 MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
218 >;
219 };
220
221 pinctrl_gpios: gpiosgrp {
222 fsl,pins = <
223 MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
224 MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
225 MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
226 MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
227 MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
228 MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
229 MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
230 MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
231 >;
232 };
233
234 pinctrl_gpio_keys: gpiokeysgrp {
235 fsl,pins = <
236 MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
237 >;
238 };
239
240 pinctrl_i2c1: i2c1grp {
241 fsl,pins = <
242 MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
243 MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
244 >;
245 };
246
247 pinctrl_i2c2: i2c2grp {
248 fsl,pins = <
249 MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
250 MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
251 >;
252 };
253
254 pinctrl_lcdif: lcdifgrp {
255 fsl,pins = <
256 MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
257 MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
258 MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
259 MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
260 MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
261 MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
262 MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
263 MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
264 MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
265 MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
266 MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
267 MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
268 MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
269 MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
270 MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
271 MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
272 MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
273 MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
274 MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
275 MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
276 MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
277 MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
278 >;
279 };
280
281 pinctrl_led: ledgrp {
282 fsl,pins = <
283 MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
284 >;
285 };
286
287 pinctrl_pwm3: pwm3grp {
288 fsl,pins = <
289 MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
290 >;
291 };
292
293 pinctrl_tsc: tscgrp {
294 fsl,pins = <
295 MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
296 MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
297 MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
298 MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
299 >;
300 };
301
302 pinctrl_uart1: uart1grp {
303 fsl,pins = <
304 MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
305 MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
306 >;
307 };
308
309 pinctrl_uart2: uart2grp {
310 fsl,pins = <
311 MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
312 MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
313 >;
314 };
315
316 pinctrl_usbotg1_id: usbotg1idgrp {
317 fsl,pins = <
318 MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
319 >;
320 };
321
322 pinctrl_usbotg1_vbus: usbotg1vbusgrp {
323 fsl,pins = <
324 MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
325 >;
326 };
327};