Ruchika Gupta | 0181937 | 2014-12-15 11:30:36 +0530 | [diff] [blame] | 1 | /* |
| 2 | * Copyright 2014 Freescale Semiconductor, Inc. |
| 3 | * |
| 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 5 | */ |
| 6 | |
| 7 | #include <common.h> |
| 8 | #include <libfdt.h> |
| 9 | #include <fdt_support.h> |
| 10 | #if CONFIG_SYS_FSL_SEC_COMPAT == 2 || CONFIG_SYS_FSL_SEC_COMPAT >= 4 |
| 11 | #include <fsl_sec.h> |
| 12 | #endif |
| 13 | |
| 14 | /* |
| 15 | * update crypto node properties to a specified revision of the SEC |
| 16 | * called with sec_rev == 0 if not on an E processor |
| 17 | */ |
| 18 | #if CONFIG_SYS_FSL_SEC_COMPAT == 2 /* SEC 2.x/3.x */ |
| 19 | void fdt_fixup_crypto_node(void *blob, int sec_rev) |
| 20 | { |
| 21 | static const struct sec_rev_prop { |
| 22 | u32 sec_rev; |
| 23 | u32 num_channels; |
| 24 | u32 channel_fifo_len; |
| 25 | u32 exec_units_mask; |
| 26 | u32 descriptor_types_mask; |
| 27 | } sec_rev_prop_list[] = { |
| 28 | { 0x0200, 4, 24, 0x07e, 0x01010ebf }, /* SEC 2.0 */ |
| 29 | { 0x0201, 4, 24, 0x0fe, 0x012b0ebf }, /* SEC 2.1 */ |
| 30 | { 0x0202, 1, 24, 0x04c, 0x0122003f }, /* SEC 2.2 */ |
| 31 | { 0x0204, 4, 24, 0x07e, 0x012b0ebf }, /* SEC 2.4 */ |
| 32 | { 0x0300, 4, 24, 0x9fe, 0x03ab0ebf }, /* SEC 3.0 */ |
| 33 | { 0x0301, 4, 24, 0xbfe, 0x03ab0ebf }, /* SEC 3.1 */ |
| 34 | { 0x0303, 4, 24, 0x97c, 0x03a30abf }, /* SEC 3.3 */ |
| 35 | }; |
| 36 | static char compat_strlist[ARRAY_SIZE(sec_rev_prop_list) * |
| 37 | sizeof("fsl,secX.Y")]; |
| 38 | int crypto_node, sec_idx, err; |
| 39 | char *p; |
| 40 | u32 val; |
| 41 | |
| 42 | /* locate crypto node based on lowest common compatible */ |
| 43 | crypto_node = fdt_node_offset_by_compatible(blob, -1, "fsl,sec2.0"); |
| 44 | if (crypto_node == -FDT_ERR_NOTFOUND) |
| 45 | return; |
| 46 | |
| 47 | /* delete it if not on an E-processor */ |
| 48 | if (crypto_node > 0 && !sec_rev) { |
| 49 | fdt_del_node(blob, crypto_node); |
| 50 | return; |
| 51 | } |
| 52 | |
| 53 | /* else we got called for possible uprev */ |
| 54 | for (sec_idx = 0; sec_idx < ARRAY_SIZE(sec_rev_prop_list); sec_idx++) |
| 55 | if (sec_rev_prop_list[sec_idx].sec_rev == sec_rev) |
| 56 | break; |
| 57 | |
| 58 | if (sec_idx == ARRAY_SIZE(sec_rev_prop_list)) { |
| 59 | puts("warning: unknown SEC revision number\n"); |
| 60 | return; |
| 61 | } |
| 62 | |
| 63 | val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].num_channels); |
| 64 | err = fdt_setprop(blob, crypto_node, "fsl,num-channels", &val, 4); |
| 65 | if (err < 0) |
| 66 | printf("WARNING: could not set crypto property: %s\n", |
| 67 | fdt_strerror(err)); |
| 68 | |
| 69 | val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].descriptor_types_mask); |
| 70 | err = fdt_setprop(blob, crypto_node, "fsl,descriptor-types-mask", |
| 71 | &val, 4); |
| 72 | if (err < 0) |
| 73 | printf("WARNING: could not set crypto property: %s\n", |
| 74 | fdt_strerror(err)); |
| 75 | |
| 76 | val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].exec_units_mask); |
| 77 | err = fdt_setprop(blob, crypto_node, "fsl,exec-units-mask", &val, 4); |
| 78 | if (err < 0) |
| 79 | printf("WARNING: could not set crypto property: %s\n", |
| 80 | fdt_strerror(err)); |
| 81 | |
| 82 | val = cpu_to_fdt32(sec_rev_prop_list[sec_idx].channel_fifo_len); |
| 83 | err = fdt_setprop(blob, crypto_node, "fsl,channel-fifo-len", &val, 4); |
| 84 | if (err < 0) |
| 85 | printf("WARNING: could not set crypto property: %s\n", |
| 86 | fdt_strerror(err)); |
| 87 | |
| 88 | val = 0; |
| 89 | while (sec_idx >= 0) { |
| 90 | p = compat_strlist + val; |
| 91 | val += sprintf(p, "fsl,sec%d.%d", |
| 92 | (sec_rev_prop_list[sec_idx].sec_rev & 0xff00) >> 8, |
| 93 | sec_rev_prop_list[sec_idx].sec_rev & 0x00ff) + 1; |
| 94 | sec_idx--; |
| 95 | } |
| 96 | err = fdt_setprop(blob, crypto_node, "compatible", &compat_strlist, |
| 97 | val); |
| 98 | if (err < 0) |
| 99 | printf("WARNING: could not set crypto property: %s\n", |
| 100 | fdt_strerror(err)); |
| 101 | } |
| 102 | #elif CONFIG_SYS_FSL_SEC_COMPAT >= 4 /* SEC4 */ |
| 103 | static u8 caam_get_era(void) |
| 104 | { |
| 105 | static const struct { |
| 106 | u16 ip_id; |
| 107 | u8 maj_rev; |
| 108 | u8 era; |
| 109 | } caam_eras[] = { |
| 110 | {0x0A10, 1, 1}, |
| 111 | {0x0A10, 2, 2}, |
| 112 | {0x0A12, 1, 3}, |
| 113 | {0x0A14, 1, 3}, |
| 114 | {0x0A14, 2, 4}, |
| 115 | {0x0A16, 1, 4}, |
| 116 | {0x0A10, 3, 4}, |
| 117 | {0x0A11, 1, 4}, |
| 118 | {0x0A18, 1, 4}, |
| 119 | {0x0A11, 2, 5}, |
| 120 | {0x0A12, 2, 5}, |
| 121 | {0x0A13, 1, 5}, |
| 122 | {0x0A1C, 1, 5} |
| 123 | }; |
| 124 | |
| 125 | ccsr_sec_t __iomem *sec = (void __iomem *)CONFIG_SYS_FSL_SEC_ADDR; |
| 126 | u32 secvid_ms = sec_in32(&sec->secvid_ms); |
| 127 | u32 ccbvid = sec_in32(&sec->ccbvid); |
| 128 | u16 ip_id = (secvid_ms & SEC_SECVID_MS_IPID_MASK) >> |
| 129 | SEC_SECVID_MS_IPID_SHIFT; |
| 130 | u8 maj_rev = (secvid_ms & SEC_SECVID_MS_MAJ_REV_MASK) >> |
| 131 | SEC_SECVID_MS_MAJ_REV_SHIFT; |
| 132 | u8 era = (ccbvid & SEC_CCBVID_ERA_MASK) >> SEC_CCBVID_ERA_SHIFT; |
| 133 | |
| 134 | int i; |
| 135 | |
| 136 | if (era) /* This is '0' prior to CAAM ERA-6 */ |
| 137 | return era; |
| 138 | |
| 139 | for (i = 0; i < ARRAY_SIZE(caam_eras); i++) |
| 140 | if (caam_eras[i].ip_id == ip_id && |
| 141 | caam_eras[i].maj_rev == maj_rev) |
| 142 | return caam_eras[i].era; |
| 143 | |
| 144 | return 0; |
| 145 | } |
| 146 | |
| 147 | static void fdt_fixup_crypto_era(void *blob, u32 era) |
| 148 | { |
| 149 | int err; |
| 150 | int crypto_node; |
| 151 | |
| 152 | crypto_node = fdt_path_offset(blob, "crypto"); |
| 153 | if (crypto_node < 0) { |
| 154 | printf("WARNING: Missing crypto node\n"); |
| 155 | return; |
| 156 | } |
| 157 | |
horia.geanta@freescale.com | e5d08b4 | 2015-07-08 17:24:56 +0300 | [diff] [blame^] | 158 | err = fdt_setprop_u32(blob, crypto_node, "fsl,sec-era", era); |
Ruchika Gupta | 0181937 | 2014-12-15 11:30:36 +0530 | [diff] [blame] | 159 | if (err < 0) { |
| 160 | printf("ERROR: could not set fsl,sec-era property: %s\n", |
| 161 | fdt_strerror(err)); |
| 162 | } |
| 163 | } |
| 164 | |
| 165 | void fdt_fixup_crypto_node(void *blob, int sec_rev) |
| 166 | { |
| 167 | u8 era; |
| 168 | |
| 169 | if (!sec_rev) { |
| 170 | fdt_del_node_and_alias(blob, "crypto"); |
| 171 | return; |
| 172 | } |
| 173 | |
| 174 | /* Add SEC ERA information in compatible */ |
| 175 | era = caam_get_era(); |
| 176 | if (era) { |
| 177 | fdt_fixup_crypto_era(blob, era); |
| 178 | } else { |
| 179 | printf("WARNING: Unable to get ERA for CAAM rev: %d\n", |
| 180 | sec_rev); |
| 181 | } |
| 182 | } |
| 183 | #endif |