blob: a9f3b3b3054bf9ea6be616668697386ba5ec7b61 [file] [log] [blame]
Ajay Bhargav26749582011-08-04 21:26:02 +05301/*
2 * (C) Copyright 2011
3 * eInfochips Ltd. <www.einfochips.com>
4 * Written-by: Ajay Bhargav <ajay.bhargav@einfochips.com>
5 *
6 * Based on Aspenite:
7 * (C) Copyright 2010
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 * Contributor: Mahavir Jain <mjain@marvell.com>
11 *
12 * See file CREDITS for list of people who contributed to this
13 * project.
14 *
15 * This program is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of
18 * the License, or (at your option) any later version.
19 *
20 * This program is distributed in the hope that it will be useful,
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * You should have received a copy of the GNU General Public License
26 * along with this program; if not, write to the Free Software
27 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
28 * MA 02110-1301 USA
29 */
30
31#ifndef __CONFIG_GPLUGD_H
32#define __CONFIG_GPLUGD_H
33
34/*
35 * Version number information
36 */
37#define CONFIG_IDENT_STRING "\nMarvell-gplugD"
38
39/*
40 * High Level Configuration Options
41 */
42#define CONFIG_SHEEVA_88SV331xV5 1 /* CPU Core subversion */
43#define CONFIG_ARMADA100 1 /* SOC Family Name */
44#define CONFIG_ARMADA168 1 /* SOC Used on this Board */
45#define CONFIG_MACH_SHEEVAD /* Machine type */
46#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
47
48#define CONFIG_SYS_TEXT_BASE 0x00f00000
49
50/*
51 * There is no internal RAM in ARMADA100, using DRAM
52 * TBD: dcache to be used for this
53 */
54#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE - 0x00200000)
55#define CONFIG_NR_DRAM_BANKS_MAX 2
56
57/*
58 * Commands configuration
59 */
60#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
61#include <config_cmd_default.h>
62#define CONFIG_CMD_I2C
63#define CONFIG_CMD_AUTOSCRIPT
64#undef CONFIG_CMD_FPGA
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053065
66/* Disable DCACHE */
67#define CONFIG_SYS_DCACHE_OFF
68
69/* Network configuration */
70#ifdef CONFIG_CMD_NET
71#define CONFIG_CMD_PING
Ajay Bhargavaa0ecfe2011-09-13 22:22:04 +053072#define CONFIG_ARMADA100_FEC
73
74/* DHCP Support */
75#define CONFIG_CMD_DHCP
76#define CONFIG_BOOTP_DHCP_REQUEST_DELAY 50000
77#endif /* CONFIG_CMD_NET */
Ajay Bhargav26749582011-08-04 21:26:02 +053078
Ajay Bhargav47e75d72011-09-13 22:22:13 +053079/* GPIO Support */
80#define CONFIG_MARVELL_GPIO
81
82/* PHY configuration */
83#define CONFIG_MII
84#define CONFIG_CMD_MII
85#define CONFIG_RESET_PHY_R
86/* 88E3015 register definition */
87#define PHY_LED_PAR_SEL_REG 22
88#define PHY_LED_MAN_REG 25
89#define PHY_LED_VAL 0x5b /* LINK LED1, ACT LED2 */
90/* GPIO Configuration for PHY */
91#define CONFIG_SYS_GPIO_PHY_RST 104 /* GPIO104 */
92
Ajay Bhargav26749582011-08-04 21:26:02 +053093/*
94 * mv-common.h should be defined after CMD configs since it used them
95 * to enable certain macros
96 */
97#include "mv-common.h"
98#undef CONFIG_ARCH_MISC_INIT
99
100#ifdef CONFIG_SYS_NS16550_COM1
101#undef CONFIG_SYS_NS16550_COM1
102#endif /* CONFIG_SYS_NS16550_COM1 */
103
104#define CONFIG_SYS_NS16550_COM1 ARMD1_UART3_BASE
105
106/*
107 * Environment variables configurations
108 */
109#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
110#define CONFIG_ENV_SIZE 0x20000 /* 64k */
111
112#endif /* __CONFIG_GPLUGD_H */