blob: 63bf365b8a3dc414a87f78feffff3127591405db [file] [log] [blame]
Michael Schwingenbc243452008-01-16 19:51:55 +01001/*
2 * (C) Copyright 2007
3 * Michael Schwingen, michael@schwingen.org
4 *
5 * (C) Copyright 2006
6 * Stefan Roese, DENX Software Engineering, sr@denx.de.
7 *
8 * (C) Copyright 2002
9 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
10 *
11 * (C) Copyright 2002
12 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
13 * Marius Groeger <mgroeger@sysgo.de>
14 *
15 * See file CREDITS for list of people who contributed to this
16 * project.
17 *
18 * This program is free software; you can redistribute it and/or
19 * modify it under the terms of the GNU General Public License as
20 * published by the Free Software Foundation; either version 2 of
21 * the License, or (at your option) any later version.
22 *
23 * This program is distributed in the hope that it will be useful,
24 * but WITHOUT ANY WARRANTY; without even the implied warranty of
25 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
26 * GNU General Public License for more details.
27 *
28 * You should have received a copy of the GNU General Public License
29 * along with this program; if not, write to the Free Software
30 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
31 * MA 02111-1307 USA
32 */
33
34#include <common.h>
35#include <command.h>
36#include <malloc.h>
37#include <asm/arch/ixp425.h>
38#include <asm/io.h>
39
40#include <miiphy.h>
41
42#include "actux3_hw.h"
43
44DECLARE_GLOBAL_DATA_PTR;
45
46int board_init (void)
47{
48 gd->bd->bi_arch_number = MACH_TYPE_ACTUX3;
49
50 /* adress of boot parameters */
51 gd->bd->bi_boot_params = 0x00000100;
52
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020053 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_IORST);
54 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_ETHRST);
55 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DSR);
56 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_DCD);
57 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED5_GN);
58 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_RT);
59 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_LED6_GN);
Michael Schwingenbc243452008-01-16 19:51:55 +010060
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020061 GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_IORST);
62 GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_ETHRST);
Michael Schwingenbc243452008-01-16 19:51:55 +010063
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020064 GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_DSR);
65 GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_DCD);
Michael Schwingenbc243452008-01-16 19:51:55 +010066
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020067 GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED5_GN);
68 GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_RT);
69 GPIO_OUTPUT_CLEAR (CONFIG_SYS_GPIO_LED6_GN);
Michael Schwingenbc243452008-01-16 19:51:55 +010070
71 /*
72 * Setup GPIO's for Interrupt inputs
73 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020074 GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_DBGINT);
75 GPIO_OUTPUT_DISABLE (CONFIG_SYS_GPIO_ETHINT);
Michael Schwingenbc243452008-01-16 19:51:55 +010076
77 /*
78 * Setup GPIO's for 33MHz clock output
79 */
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020080 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_PCI_CLK);
81 GPIO_OUTPUT_ENABLE (CONFIG_SYS_GPIO_EXTBUS_CLK);
Michael Schwingenbc243452008-01-16 19:51:55 +010082 *IXP425_GPIO_GPCLKR = 0x011001FF;
83
84 /* CS1: IPAC-X */
85 *IXP425_EXP_CS1 = 0x94d10013;
86 /* CS5: Debug port */
87 *IXP425_EXP_CS5 = 0x9d520003;
88 /* CS6: Release/Option register */
89 *IXP425_EXP_CS6 = 0x81860001;
90 /* CS7: LEDs */
91 *IXP425_EXP_CS7 = 0x80900003;
92
93 udelay (533);
Jean-Christophe PLAGNIOL-VILLARD6d0f6bc2008-10-16 15:01:15 +020094 GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_IORST);
95 GPIO_OUTPUT_SET (CONFIG_SYS_GPIO_ETHRST);
Michael Schwingenbc243452008-01-16 19:51:55 +010096
97 ACTUX3_LED1_RT (1);
98 ACTUX3_LED1_GN (0);
99 ACTUX3_LED2_RT (0);
100 ACTUX3_LED2_GN (0);
101 ACTUX3_LED3_RT (0);
102 ACTUX3_LED3_GN (0);
103 ACTUX3_LED4_GN (0);
104 ACTUX3_LED5_RT (0);
105
106 return 0;
107}
108
109/*
110 * Check Board Identity
111 */
112int checkboard (void)
113{
Michael Schwingenbc243452008-01-16 19:51:55 +0100114 char *s = getenv ("serial#");
115
116 puts ("Board: AcTux-3 rev.");
117 putc (ACTUX3_BOARDREL + 'A' - 1);
118
119 if (s != NULL) {
120 puts (", serial# ");
121 puts (s);
122 }
123 putc ('\n');
124
125 return (0);
126}
127
128/*************************************************************************
129 * get_board_rev() - setup to pass kernel board revision information
130 * 0 = reserved
131 * 1 = Rev. A
132 * 2 = Rev. B
133 *************************************************************************/
134u32 get_board_rev (void)
135{
136 return ACTUX3_BOARDREL;
137}
138
139int dram_init (void)
140{
141 gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
142 gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
143
144 return (0);
145}
146
147void reset_phy (void)
148{
149 int i;
150
151 /* initialize the PHY */
152 miiphy_reset ("NPE0", CONFIG_PHY_ADDR);
153
154 /* all LED outputs = Link/Act */
155 miiphy_write ("NPE0", CONFIG_PHY_ADDR, 0x16, 0x0AAA);
156
157 /*
158 * The Marvell 88E6060 switch comes up with all ports disabled.
159 * set all ethernet switch ports to forwarding state
160 */
161 for (i = 1; i <= 5; i++)
162 miiphy_write ("NPE0", CONFIG_PHY_ADDR + 8 + i, 0x04, 0x03);
163
164}