blob: ed612c33964be96c32f74162805e4e7629494ca1 [file] [log] [blame]
wdenk384ae022002-11-05 00:17:55 +00001/*
wdenk414eec32005-04-02 22:37:54 +00002 * (C) Copyright 2000-2005
wdenk384ae022002-11-05 00:17:55 +00003 * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
4 *
5 * See file CREDITS for list of people who contributed to this
6 * project.
7 *
8 * This program is free software; you can redistribute it and/or
9 * modify it under the terms of the GNU General Public License as
10 * published by the Free Software Foundation; either version 2 of
11 * the License, or (at your option) any later version.
12 *
13 * This program is distributed in the hope that it will be useful,
14 * but WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
16 * GNU General Public License for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
21 * MA 02111-1307 USA
22 */
23
24/*
25 * board/config.h - configuration options, board specific
26 */
27
28#ifndef __CONFIG_H
29#define __CONFIG_H
30
31/*
32 * High Level Configuration Options
33 * (easy to change)
34 */
35
36#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
37#define CONFIG_FPS860L 1 /* ...on a FingerPrint Sensor */
38
39#undef CONFIG_8xx_CONS_SMC1
40#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
41#undef CONFIG_8xx_CONS_NONE
42#define CONFIG_BAUDRATE 115200
Wolfgang Denkeb6da802007-09-16 02:39:35 +020043
44#define CONFIG_BOOTCOUNT_LIMIT
45
wdenk384ae022002-11-05 00:17:55 +000046#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
wdenk384ae022002-11-05 00:17:55 +000047
wdenk384ae022002-11-05 00:17:55 +000048#define CONFIG_BOARD_TYPES 1 /* support board types */
49
Wolfgang Denk32bf3d12008-03-03 12:16:44 +010050#define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
Wolfgang Denkeb6da802007-09-16 02:39:35 +020051
52#undef CONFIG_BOOTARGS
53
54#define CONFIG_EXTRA_ENV_SETTINGS \
55 "netdev=eth0\0" \
56 "nfsargs=setenv bootargs root=/dev/nfs rw " \
57 "nfsroot=${serverip}:${rootpath}\0" \
58 "ramargs=setenv bootargs root=/dev/ram rw\0" \
59 "addip=setenv bootargs ${bootargs} " \
60 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
61 ":${hostname}:${netdev}:off panic=1\0" \
62 "flash_nfs=run nfsargs addip;" \
63 "bootm ${kernel_addr}\0" \
64 "flash_self=run ramargs addip;" \
65 "bootm ${kernel_addr} ${ramdisk_addr}\0" \
66 "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
67 "rootpath=/opt/eldk/ppc_8xx\0" \
68 "bootfile=/tftpboot/fps850L/uImage\0" \
69 "fdt_addr=40040000\0" \
70 "kernel_addr=40060000\0" \
71 "ramdisk_addr=40200000\0" \
72 ""
73#define CONFIG_BOOTCOMMAND "run flash_self"
wdenk384ae022002-11-05 00:17:55 +000074
75#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
76#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
77
78#undef CONFIG_WATCHDOG /* watchdog disabled */
79
Jon Loeliger5d2ebe12007-07-09 21:16:53 -050080/*
81 * BOOTP options
82 */
83#define CONFIG_BOOTP_SUBNETMASK
84#define CONFIG_BOOTP_GATEWAY
85#define CONFIG_BOOTP_HOSTNAME
86#define CONFIG_BOOTP_BOOTPATH
87#define CONFIG_BOOTP_BOOTFILESIZE
88#define CONFIG_BOOTP_SUBNETMASK
89#define CONFIG_BOOTP_GATEWAY
90#define CONFIG_BOOTP_HOSTNAME
91#define CONFIG_BOOTP_NISDOMAIN
92#define CONFIG_BOOTP_BOOTPATH
93#define CONFIG_BOOTP_DNS
94#define CONFIG_BOOTP_DNS2
95#define CONFIG_BOOTP_SEND_HOSTNAME
96#define CONFIG_BOOTP_NTPSERVER
97#define CONFIG_BOOTP_TIMEOFFSET
wdenk384ae022002-11-05 00:17:55 +000098
99#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
100
Jon Loeliger60a08762007-07-07 21:04:26 -0500101/*
102 * Command line configuration.
103 */
104#include <config_cmd_default.h>
Wolfgang Denkeb6da802007-09-16 02:39:35 +0200105
Jon Loeliger60a08762007-07-07 21:04:26 -0500106#define CONFIG_CMD_ASKENV
107#define CONFIG_CMD_DATE
108#define CONFIG_CMD_DHCP
109#define CONFIG_CMD_NFS
110#define CONFIG_CMD_SNTP
111
wdenk384ae022002-11-05 00:17:55 +0000112
113/*
114 * Miscellaneous configurable options
115 */
116#define CFG_LONGHELP /* undef to save memory */
Wolfgang Denkeb6da802007-09-16 02:39:35 +0200117#define CFG_PROMPT "=> " /* Monitor Command Prompt */
118
119#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
120#define CFG_HUSH_PARSER 1 /* Use the HUSH parser */
121#ifdef CFG_HUSH_PARSER
122#define CFG_PROMPT_HUSH_PS2 "> "
123#endif
124
Jon Loeliger60a08762007-07-07 21:04:26 -0500125#if defined(CONFIG_CMD_KGDB)
wdenk384ae022002-11-05 00:17:55 +0000126#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
127#else
128#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
129#endif
130#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
131#define CFG_MAXARGS 16 /* max number of command args */
132#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
133
134#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
135#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
136
137#define CFG_LOAD_ADDR 0x100000 /* default load address */
138
139#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
140
141#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
142
143/*
144 * Low Level Configuration Settings
145 * (address mappings, register initial values, etc.)
146 * You should know what you are doing if you make changes here.
147 */
148/*-----------------------------------------------------------------------
149 * Internal Memory Mapped Register
150 */
151#define CFG_IMMR 0xFFF00000
152
153/*-----------------------------------------------------------------------
154 * Definitions for initial stack pointer and data area (in DPRAM)
155 */
156#define CFG_INIT_RAM_ADDR CFG_IMMR
157#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
158#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
159#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
160#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
161
162/*-----------------------------------------------------------------------
163 * Start addresses for the final memory configuration
164 * (Set up by the startup code)
165 * Please note that CFG_SDRAM_BASE _must_ start at 0
166 */
167#define CFG_SDRAM_BASE 0x00000000
168#define CFG_FLASH_BASE 0x40000000
169#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
170#define CFG_MONITOR_BASE CFG_FLASH_BASE
171#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
172
173/*
174 * For booting Linux, the board info and command line data
175 * have to be in the first 8 MB of memory, since this is
176 * the maximum mapped by the Linux kernel during initialization.
177 */
178#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
179
180/*-----------------------------------------------------------------------
181 * FLASH organization
182 */
183#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
184#define CFG_MAX_FLASH_SECT 67 /* max number of sectors on one chip */
185
186#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
187#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
188
189#define CFG_ENV_IS_IN_FLASH 1
190#define CFG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */
191#define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */
192
193/* Address and size of Redundant Environment Sector */
194#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SIZE)
195#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
196
197/*-----------------------------------------------------------------------
198 * Hardware Information Block
199 */
200#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
201#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
202#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
203
204/*-----------------------------------------------------------------------
205 * Cache Configuration
206 */
207#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
Jon Loeliger60a08762007-07-07 21:04:26 -0500208#if defined(CONFIG_CMD_KGDB)
wdenk384ae022002-11-05 00:17:55 +0000209#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
210#endif
211
212/*-----------------------------------------------------------------------
213 * SYPCR - System Protection Control 11-9
214 * SYPCR can only be written once after reset!
215 *-----------------------------------------------------------------------
216 * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
217 */
218#if defined(CONFIG_WATCHDOG)
219#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
220 SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
221#else
222#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
223#endif
224
225/*-----------------------------------------------------------------------
226 * SIUMCR - SIU Module Configuration 11-6
227 *-----------------------------------------------------------------------
228 * PCMCIA config., multi-function pin tri-state
229 */
230#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
231
232/*-----------------------------------------------------------------------
233 * TBSCR - Time Base Status and Control 11-26
234 *-----------------------------------------------------------------------
235 * Clear Reference Interrupt Status, Timebase freezing enabled
236 */
237#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
238
239/*-----------------------------------------------------------------------
240 * RTCSC - Real-Time Clock Status and Control Register 11-27
241 *-----------------------------------------------------------------------
242 */
243#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
244
245/*-----------------------------------------------------------------------
246 * PISCR - Periodic Interrupt Status and Control 11-31
247 *-----------------------------------------------------------------------
248 * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
249 */
250#define CFG_PISCR (PISCR_PS | PISCR_PITF)
251
252/*-----------------------------------------------------------------------
253 * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
254 *-----------------------------------------------------------------------
255 * Reset PLL lock status sticky bit, timer expired status bit and timer
256 * interrupt status bit - leave PLL multiplication factor unchanged !
257 */
258#define CFG_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
259
260/*-----------------------------------------------------------------------
261 * SCCR - System Clock and reset Control Register 15-27
262 *-----------------------------------------------------------------------
263 * Set clock output, timebase and RTC source and divider,
264 * power management and some other internal clocks
265 */
266#define SCCR_MASK SCCR_EBDF11
267#define CFG_SCCR (SCCR_TBS | \
268 SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
269 SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
270 SCCR_DFALCD00)
271
272/*-----------------------------------------------------------------------
273 * PCMCIA stuff
274 *-----------------------------------------------------------------------
275 *
276 */
277#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
278#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
279#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
280#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
281#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
282#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
283#define CFG_PCMCIA_IO_ADDR (0xEC000000)
284#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
285
286/*-----------------------------------------------------------------------
287 *
288 *-----------------------------------------------------------------------
289 *
290 */
wdenk384ae022002-11-05 00:17:55 +0000291#define CFG_DER 0
292
293/*
294 * Init Memory Controller:
295 *
296 * BR0/1 and OR0/1 (FLASH)
297 */
298
299#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
300#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
301
302/* used to re-map FLASH both when starting from SRAM or FLASH:
303 * restrict access enough to keep SRAM working (if any)
304 * but not too much to meddle with FLASH accesses
305 */
306#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
307#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
308
309/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1 */
310#define CFG_OR_TIMING_FLASH (OR_CSNT_SAM | OR_ACS_DIV2 | OR_BI | \
311 OR_SCY_5_CLK | OR_EHTR)
312
313#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
314#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
315#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
316
317#define CFG_OR1_REMAP CFG_OR0_REMAP
318#define CFG_OR1_PRELIM CFG_OR0_PRELIM
319#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
320
321/*
322 * BR2/3 and OR2/3 (SDRAM)
323 *
324 */
325#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
326#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
327#define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */
328
329/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
330#define CFG_OR_TIMING_SDRAM 0x00000A00
331
332#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
333#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
334
335#define CFG_OR3_PRELIM CFG_OR2_PRELIM
336#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
337
338/*
339 * Memory Periodic Timer Prescaler
340 */
341
342/* periodic timer for refresh */
343#define CFG_MAMR_PTA 97 /* start with divider for 100 MHz */
344
345/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit */
346#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
347#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
348
349/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
350#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
351#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
352
353/*
354 * MAMR settings for SDRAM
355 */
356
357/* 8 column SDRAM */
358#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
359 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
360 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
361/* 9 column SDRAM */
362#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
363 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
364 MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
365
366
367/*
368 * Internal Definitions
369 *
370 * Boot Flags
371 */
372#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
373#define BOOTFLAG_WARM 0x02 /* Software reboot */
374
375#endif /* __CONFIG_H */