blob: f0ae6e67a710e06b2de0b22b5211bb837974a044 [file] [log] [blame]
Tom Rini83d290c2018-05-06 17:58:06 -04001/* SPDX-License-Identifier: GPL-2.0+ */
Kever Yanga381bcf2016-07-19 21:16:59 +08002/*
3 * (C) Copyright 2016 Rockchip Electronics Co., Ltd
Kever Yanga381bcf2016-07-19 21:16:59 +08004 */
5
6#ifndef __CONFIG_RK3399_COMMON_H
7#define __CONFIG_RK3399_COMMON_H
8
Jacob Chen7f35bbb2016-10-08 13:47:41 +08009#include "rockchip-common.h"
10
Kever Yanga381bcf2016-07-19 21:16:59 +080011#define CONFIG_SYS_CBSIZE 1024
12#define CONFIG_SKIP_LOWLEVEL_INIT
Kever Yanga381bcf2016-07-19 21:16:59 +080013
Philipp Tomsich88cb1a92017-03-23 23:27:45 +010014#define COUNTER_FREQUENCY 24000000
Kever Yang87ac5502019-07-09 22:05:59 +080015#define CONFIG_ROCKCHIP_STIMER_BASE 0xff8680a0
Philipp Tomsich88cb1a92017-03-23 23:27:45 +010016
Kever Yang5f246802019-07-22 19:59:09 +080017#define CONFIG_IRAM_BASE 0xff8c0000
18
Kever Yanga381bcf2016-07-19 21:16:59 +080019#define CONFIG_SYS_INIT_SP_ADDR 0x00300000
20#define CONFIG_SYS_LOAD_ADDR 0x00800800
Kever Yang6bbf5e12018-11-09 11:18:15 +080021
22#if defined(CONFIG_SPL_BUILD) && defined(CONFIG_TPL_BOOTROM_SUPPORT)
23#define CONFIG_SPL_STACK 0x00400000
Kever Yang60244672019-10-18 15:54:16 +080024#define CONFIG_SPL_MAX_SIZE 0x40000
Kever Yang6bbf5e12018-11-09 11:18:15 +080025#define CONFIG_SPL_BSS_START_ADDR 0x00400000
26#define CONFIG_SPL_BSS_MAX_SIZE 0x2000
27#else
Kever Yang3012a842017-02-23 16:09:05 +080028#define CONFIG_SPL_STACK 0xff8effff
Kever Yang5302feb2017-06-14 16:14:18 +080029#define CONFIG_SPL_MAX_SIZE 0x30000 - 0x2000
Kever Yang3012a842017-02-23 16:09:05 +080030/* BSS setup */
31#define CONFIG_SPL_BSS_START_ADDR 0xff8e0000
32#define CONFIG_SPL_BSS_MAX_SIZE 0x10000
Kever Yang6bbf5e12018-11-09 11:18:15 +080033#endif
Kever Yanga381bcf2016-07-19 21:16:59 +080034
35#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* 64M */
36
37/* MMC/SD IP block */
Kever Yanga381bcf2016-07-19 21:16:59 +080038#define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ 200000000
39
Kever Yanga381bcf2016-07-19 21:16:59 +080040/* RAW SD card / eMMC locations. */
Kever Yanga381bcf2016-07-19 21:16:59 +080041
42/* FAT sd card locations. */
43#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
44#define CONFIG_SYS_SDRAM_BASE 0
Kever Yang6d1970f2017-06-23 16:11:05 +080045#define SDRAM_MAX_SIZE 0xf8000000
Kever Yanga381bcf2016-07-19 21:16:59 +080046
Kever Yanga381bcf2016-07-19 21:16:59 +080047#ifndef CONFIG_SPL_BUILD
Kever Yanga381bcf2016-07-19 21:16:59 +080048
49#define ENV_MEM_LAYOUT_SETTINGS \
Kever Yang86d01262017-04-07 18:12:55 +080050 "scriptaddr=0x00500000\0" \
Jagan Tekid2c19b72020-04-10 23:56:30 +053051 "script_offset_f=0xffe000\0" \
52 "script_size_f=0x2000\0" \
Kever Yang86d01262017-04-07 18:12:55 +080053 "pxefile_addr_r=0x00600000\0" \
Kever Yanga381bcf2016-07-19 21:16:59 +080054 "fdt_addr_r=0x01f00000\0" \
Klaus Goger0c8e0b32018-02-19 08:02:26 +010055 "kernel_addr_r=0x02080000\0" \
Ben Wolsiefferb2e373d2019-12-03 00:40:05 -050056 "ramdisk_addr_r=0x06000000\0"
Kever Yanga381bcf2016-07-19 21:16:59 +080057
Simon Glass8a0c6aa2019-01-21 14:53:32 -070058#ifndef ROCKCHIP_DEVICE_SETTINGS
59#define ROCKCHIP_DEVICE_SETTINGS
60#endif
61
Kever Yanga381bcf2016-07-19 21:16:59 +080062#include <config_distro_bootcmd.h>
Jagan Tekif263b862020-04-10 23:56:31 +053063#include <environment/distro/sf.h>
Kever Yanga381bcf2016-07-19 21:16:59 +080064#define CONFIG_EXTRA_ENV_SETTINGS \
Kever Yang583b1bc2016-08-04 11:40:29 +080065 ENV_MEM_LAYOUT_SETTINGS \
Klaus Gogera2a50532018-05-25 23:45:05 +020066 "fdtfile=" CONFIG_DEFAULT_FDT_FILE "\0" \
Kever Yang583b1bc2016-08-04 11:40:29 +080067 "partitions=" PARTS_DEFAULT \
Simon Glass8a0c6aa2019-01-21 14:53:32 -070068 ROCKCHIP_DEVICE_SETTINGS \
Jagan Tekiefebc8e2020-01-09 14:22:19 +053069 BOOTENV \
70 "altbootcmd=" \
71 "setenv boot_syslinux_conf extlinux/extlinux-rollback.conf;" \
72 "run distro_bootcmd\0"
Kever Yanga381bcf2016-07-19 21:16:59 +080073
74#endif
75
MengDongyang923e7b42016-08-24 12:02:19 +080076/* enable usb config for usb ether */
MengDongyang923e7b42016-08-24 12:02:19 +080077
Kever Yanga381bcf2016-07-19 21:16:59 +080078#endif