blob: 9ecf31d7c2d5f3bea1c7447bc1b8deb4efdc66be [file] [log] [blame]
Stefano Babic79656d22012-02-22 00:24:40 +00001/*
2 * (C) Copyright 2012, Stefano Babic <sbabic@denx.de>
3 *
4 * (C) Copyright 2010 Freescale Semiconductor, Inc.
5 *
6 * See file CREDITS for list of people who contributed to this
7 * project.
8 *
9 * This program is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This program is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program; if not, write to the Free Software
21 * Foundation, Inc.
22 */
23#include <common.h>
24#include <asm/io.h>
25#include <asm/arch/imx-regs.h>
26#include <asm/arch/mx5x_pins.h>
27#include <asm/arch/sys_proto.h>
28#include <asm/arch/crm_regs.h>
29#include <asm/arch/clock.h>
30#include <asm/arch/iomux.h>
31#include <asm/errno.h>
32#include <netdev.h>
33#include <mmc.h>
34#include <fsl_esdhc.h>
35#include <asm/gpio.h>
36
37/* NOR flash configuration */
38#define IMA3_MX53_CS0GCR1 (CSEN | DSZ(2))
39#define IMA3_MX53_CS0GCR2 0
40#define IMA3_MX53_CS0RCR1 (RCSN(2) | OEN(1) | RWSC(15))
41#define IMA3_MX53_CS0RCR2 0
42#define IMA3_MX53_CS0WCR1 (WBED1 | WCSN(2) | WEN(1) | WWSC(15))
43#define IMA3_MX53_CS0WCR2 0
44
45DECLARE_GLOBAL_DATA_PTR;
46
47static void weim_nor_settings(void)
48{
49 struct weim *weim_regs = (struct weim *)WEIM_BASE_ADDR;
50
51 writel(IMA3_MX53_CS0GCR1, &weim_regs->cs0gcr1);
52 writel(IMA3_MX53_CS0GCR2, &weim_regs->cs0gcr2);
53 writel(IMA3_MX53_CS0RCR1, &weim_regs->cs0rcr1);
54 writel(IMA3_MX53_CS0RCR2, &weim_regs->cs0rcr2);
55 writel(IMA3_MX53_CS0WCR1, &weim_regs->cs0wcr1);
56 writel(IMA3_MX53_CS0WCR2, &weim_regs->cs0wcr2);
57 writel(0x0, &weim_regs->wcr);
58
59 set_chipselect_size(CS0_128);
60}
61
62int dram_init(void)
63{
64 gd->ram_size = get_ram_size((void *) CONFIG_SYS_SDRAM_BASE,
65 PHYS_SDRAM_1_SIZE);
66 return 0;
67}
68
69static void setup_iomux_uart(void)
70{
71 /* UART4 RXD */
72 mxc_request_iomux(MX53_PIN_CSI0_D13, IOMUX_CONFIG_ALT2);
73 mxc_iomux_set_pad(MX53_PIN_CSI0_D13,
74 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
75 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
76 PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
77 mxc_iomux_set_input(MX53_UART4_IPP_UART_RXD_MUX_SELECT_INPUT, 0x3);
78
79 /* UART4 TXD */
80 mxc_request_iomux(MX53_PIN_CSI0_D12, IOMUX_CONFIG_ALT2);
81 mxc_iomux_set_pad(MX53_PIN_CSI0_D12,
82 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
83 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
84 PAD_CTL_100K_PU | PAD_CTL_ODE_OPENDRAIN_ENABLE);
85}
86
87static void setup_iomux_fec(void)
88{
89 /*FEC_MDIO*/
90 mxc_request_iomux(MX53_PIN_FEC_MDIO, IOMUX_CONFIG_ALT0);
91 mxc_iomux_set_pad(MX53_PIN_FEC_MDIO,
92 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH |
93 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_22K_PU |
94 PAD_CTL_ODE_OPENDRAIN_ENABLE);
95 mxc_iomux_set_input(MX53_FEC_FEC_MDI_SELECT_INPUT, 0x1);
96
97 /*FEC_MDC*/
98 mxc_request_iomux(MX53_PIN_FEC_MDC, IOMUX_CONFIG_ALT0);
99 mxc_iomux_set_pad(MX53_PIN_FEC_MDC, PAD_CTL_DRV_HIGH);
100
101 /* FEC RXD3 */
102 mxc_request_iomux(MX53_PIN_KEY_COL0, IOMUX_CONFIG_ALT6);
103 mxc_iomux_set_pad(MX53_PIN_KEY_COL0, PAD_CTL_HYS_ENABLE |
104 PAD_CTL_PKE_ENABLE);
105
106 /* FEC RXD2 */
107 mxc_request_iomux(MX53_PIN_KEY_COL2, IOMUX_CONFIG_ALT6);
108 mxc_iomux_set_pad(MX53_PIN_KEY_COL2, PAD_CTL_HYS_ENABLE |
109 PAD_CTL_PKE_ENABLE);
110
111 /* FEC RXD1 */
112 mxc_request_iomux(MX53_PIN_FEC_RXD1, IOMUX_CONFIG_ALT0);
113 mxc_iomux_set_pad(MX53_PIN_FEC_RXD1, PAD_CTL_HYS_ENABLE |
114 PAD_CTL_PKE_ENABLE);
115
116 /* FEC RXD0 */
117 mxc_request_iomux(MX53_PIN_FEC_RXD0, IOMUX_CONFIG_ALT0);
118 mxc_iomux_set_pad(MX53_PIN_FEC_RXD0, PAD_CTL_HYS_ENABLE |
119 PAD_CTL_PKE_ENABLE);
120
121 /* FEC TXD3 */
122 mxc_request_iomux(MX53_PIN_GPIO_19, IOMUX_CONFIG_ALT6);
123 mxc_iomux_set_pad(MX53_PIN_GPIO_19, PAD_CTL_DRV_HIGH);
124
125 /* FEC TXD2 */
126 mxc_request_iomux(MX53_PIN_KEY_ROW2, IOMUX_CONFIG_ALT6);
127 mxc_iomux_set_pad(MX53_PIN_KEY_ROW2, PAD_CTL_DRV_HIGH);
128
129 /* FEC TXD1 */
130 mxc_request_iomux(MX53_PIN_FEC_TXD1, IOMUX_CONFIG_ALT0);
131 mxc_iomux_set_pad(MX53_PIN_FEC_TXD1, PAD_CTL_DRV_HIGH);
132
133 /* FEC TXD0 */
134 mxc_request_iomux(MX53_PIN_FEC_TXD0, IOMUX_CONFIG_ALT0);
135 mxc_iomux_set_pad(MX53_PIN_FEC_TXD0, PAD_CTL_DRV_HIGH);
136
137 /* FEC TX_EN */
138 mxc_request_iomux(MX53_PIN_FEC_TX_EN, IOMUX_CONFIG_ALT0);
139 mxc_iomux_set_pad(MX53_PIN_FEC_TX_EN, PAD_CTL_DRV_HIGH);
140
141 /* FEC TX_CLK */
142 mxc_request_iomux(MX53_PIN_FEC_REF_CLK, IOMUX_CONFIG_ALT0);
143 mxc_iomux_set_pad(MX53_PIN_FEC_REF_CLK, PAD_CTL_HYS_ENABLE |
144 PAD_CTL_PKE_ENABLE);
145
146 /* FEC RX_ER */
147 mxc_request_iomux(MX53_PIN_FEC_RX_ER, IOMUX_CONFIG_ALT0);
148 mxc_iomux_set_pad(MX53_PIN_FEC_RX_ER, PAD_CTL_HYS_ENABLE |
149 PAD_CTL_PKE_ENABLE);
150
151 /* FEC RX_DV */
152 mxc_request_iomux(MX53_PIN_FEC_CRS_DV, IOMUX_CONFIG_ALT0);
153 mxc_iomux_set_pad(MX53_PIN_FEC_CRS_DV, PAD_CTL_HYS_ENABLE |
154 PAD_CTL_PKE_ENABLE);
155
156 /* FEC CRS */
157 mxc_request_iomux(MX53_PIN_KEY_COL3, IOMUX_CONFIG_ALT6);
158 mxc_iomux_set_pad(MX53_PIN_KEY_COL3, PAD_CTL_HYS_ENABLE |
159 PAD_CTL_PKE_ENABLE);
160
161 /* FEC COL */
162 mxc_request_iomux(MX53_PIN_KEY_ROW1, IOMUX_CONFIG_ALT6);
163 mxc_iomux_set_pad(MX53_PIN_KEY_ROW1, PAD_CTL_HYS_ENABLE |
164 PAD_CTL_PKE_ENABLE);
165 mxc_iomux_set_input(MX53_FEC_FEC_COL_SELECT_INPUT, 0x0);
166
167 /* FEC RX_CLK */
168 mxc_request_iomux(MX53_PIN_KEY_COL1, IOMUX_CONFIG_ALT6);
169 mxc_iomux_set_pad(MX53_PIN_KEY_COL1, PAD_CTL_HYS_ENABLE |
170 PAD_CTL_PKE_ENABLE);
171 mxc_iomux_set_input(MX53_FEC_FEC_RX_CLK_SELECT_INPUT, 0x0);
172}
173
174#ifdef CONFIG_FSL_ESDHC
175struct fsl_esdhc_cfg esdhc_cfg = { MMC_SDHC1_BASE_ADDR, 1 };
176
177int board_mmc_getcd(struct mmc *mmc)
178{
179 int ret;
180
181 ret = !gpio_get_value(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
182
183 return ret;
184}
185
186int board_mmc_init(bd_t *bis)
187{
188 mxc_request_iomux(MX53_PIN_SD1_CMD, IOMUX_CONFIG_ALT0);
189 mxc_request_iomux(MX53_PIN_SD1_CLK, IOMUX_CONFIG_ALT0);
190 mxc_request_iomux(MX53_PIN_SD1_DATA0, IOMUX_CONFIG_ALT0);
191 mxc_request_iomux(MX53_PIN_SD1_DATA1, IOMUX_CONFIG_ALT0);
192 mxc_request_iomux(MX53_PIN_SD1_DATA2, IOMUX_CONFIG_ALT0);
193 mxc_request_iomux(MX53_PIN_SD1_DATA3, IOMUX_CONFIG_ALT0);
194 mxc_request_iomux(MX53_PIN_GPIO_1, IOMUX_CONFIG_ALT1);
195 mxc_iomux_set_pad(MX53_PIN_GPIO_1,
196 PAD_CTL_DRV_HIGH | PAD_CTL_HYS_ENABLE |
197 PAD_CTL_PUE_KEEPER | PAD_CTL_100K_PU |
198 PAD_CTL_ODE_OPENDRAIN_NONE | PAD_CTL_PKE_ENABLE);
199 gpio_direction_input(IOMUX_TO_GPIO(MX53_PIN_GPIO_1));
200
201 mxc_iomux_set_pad(MX53_PIN_SD1_CMD,
202 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
203 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_100K_PU);
204 mxc_iomux_set_pad(MX53_PIN_SD1_CLK,
205 PAD_CTL_PUE_PULL | PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE |
206 PAD_CTL_47K_PU | PAD_CTL_DRV_HIGH);
207 mxc_iomux_set_pad(MX53_PIN_SD1_DATA0,
208 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
209 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
210 mxc_iomux_set_pad(MX53_PIN_SD1_DATA1,
211 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
212 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
213 mxc_iomux_set_pad(MX53_PIN_SD1_DATA2,
214 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
215 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
216 mxc_iomux_set_pad(MX53_PIN_SD1_DATA3,
217 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
218 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
219
220 return fsl_esdhc_initialize(bis, &esdhc_cfg);
221}
222#endif
223
224static void setup_iomux_spi(void)
225{
226 /* SCLK */
227 mxc_request_iomux(MX53_PIN_CSI0_D8, IOMUX_CONFIG_ALT3);
228 mxc_iomux_set_pad(MX53_PIN_CSI0_D8,
229 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
230 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
231 mxc_iomux_set_input(MX53_ECSPI2_IPP_CSPI_CLK_IN_SELECT_INPUT, 0x1);
232 /* MOSI */
233 mxc_request_iomux(MX53_PIN_CSI0_D9, IOMUX_CONFIG_ALT3);
234 mxc_iomux_set_pad(MX53_PIN_CSI0_D9,
235 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
236 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
237 mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MOSI_SELECT_INPUT, 0x1);
238 /* MISO */
239 mxc_request_iomux(MX53_PIN_CSI0_D10, IOMUX_CONFIG_ALT3);
240 mxc_iomux_set_pad(MX53_PIN_CSI0_D10,
241 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
242 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
243 mxc_iomux_set_input(MX53_ECSPI2_IPP_IND_MISO_SELECT_INPUT, 0x1);
244 /* SSEL 0 */
245 mxc_request_iomux(MX53_PIN_CSI0_D11, IOMUX_CONFIG_GPIO);
246 mxc_iomux_set_pad(MX53_PIN_CSI0_D11,
247 PAD_CTL_HYS_ENABLE | PAD_CTL_DRV_HIGH | PAD_CTL_PUE_PULL |
248 PAD_CTL_PKE_ENABLE | PAD_CTL_HYS_ENABLE | PAD_CTL_47K_PU);
249 gpio_direction_output(IOMUX_TO_GPIO(MX53_PIN_CSI0_D11), 1);
250}
251
252int board_early_init_f(void)
253{
254 /* configure I/O pads */
255 setup_iomux_uart();
256 setup_iomux_fec();
257
258 weim_nor_settings();
259
260 /* configure spi */
261 setup_iomux_spi();
262
263 return 0;
264}
265
266int board_init(void)
267{
268 gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
269
270 mxc_set_sata_internal_clock();
271
272 return 0;
273}
274
275#if defined(CONFIG_RESET_PHY_R)
276#include <miiphy.h>
277
278void reset_phy(void)
279{
280 unsigned short reg;
281
282 /* reset the phy */
283 miiphy_reset("FEC", CONFIG_PHY_ADDR);
284
285 /* set hard link to 100Mbit, full-duplex */
286 miiphy_read("FEC", CONFIG_PHY_ADDR, MII_BMCR, &reg);
287 reg &= ~BMCR_ANENABLE;
288 reg |= (BMCR_SPEED100 | BMCR_FULLDPLX);
289 miiphy_write("FEC", CONFIG_PHY_ADDR, MII_BMCR, reg);
290
291 miiphy_read("FEC", CONFIG_PHY_ADDR, 0x16, &reg);
292 reg |= (1 << 5);
293 miiphy_write("FEC", CONFIG_PHY_ADDR, 0x16, reg);
294}
295#endif
296
297int checkboard(void)
298{
299 puts("Board: IMA3_MX53\n");
300
301 return 0;
302}