blob: 16e8a7f2b8be51212062d27ecf011b82eb62839a [file] [log] [blame]
Marek Vasut0ec005f2012-07-03 03:02:20 +00001/*
2 * Copyright (C) 2012 Marek Vasut <marex@denx.de>
3 * on behalf of DENX Software Engineering GmbH
4 *
Wolfgang Denk1a459662013-07-08 09:37:19 +02005 * SPDX-License-Identifier: GPL-2.0+
Marek Vasut0ec005f2012-07-03 03:02:20 +00006 */
7
8#ifndef __CONFIG_TK71_H__
9#define __CONFIG_TK71_H__
10
11/*
12 * Version number information
13 */
14#define CONFIG_IDENT_STRING "\nKa-Ro TK71"
15
16/*
17 * High Level Configuration Options (easy to change)
18 */
19#define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */
20#define CONFIG_KIRKWOOD 1 /* SOC Family Name */
21#define CONFIG_KW88F6281 1 /* SOC Name */
22#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
23#define CONFIG_NR_DRAM_BANKS 1
24
25#define MACH_TYPE_TK71 2399
26#define CONFIG_MACH_TYPE MACH_TYPE_TK71
27
28/*
29 * Commands configuration
30 */
31#define CONFIG_SYS_HUSH_PARSER
32
33#define CONFIG_SYS_NO_FLASH
34#define CONFIG_DOS_PARTITION
35#define CONFIG_SUPPORT_VFAT
36
37#include <config_cmd_default.h>
38#define CONFIG_CMD_DHCP
39#define CONFIG_CMD_ENV
40#define CONFIG_CMD_EXT2
41#define CONFIG_CMD_FAT
42#define CONFIG_CMD_MTDPARTS
43#define CONFIG_CMD_NAND
44#define CONFIG_CMD_PING
45#define CONFIG_CMD_USB
46
47/*
48 * mv-common.h should be defined after CMD configs since it used them
49 * to enable certain macros
50 */
51#include "mv-common.h"
52
53/*
54 * NAND flash
55 */
56#ifdef CONFIG_CMD_NAND
57#define CONFIG_MTD_DEVICE
58#define CONFIG_MTD_PARTITIONS
59#define CONFIG_JFFS2_NAND
60#define CONFIG_JFFS2_DEV "nand0,3"
61#endif
62
63/*
64 * Ethernet Driver configuration
65 */
66#ifdef CONFIG_CMD_NET
67#define CONFIG_MVGBE_PORTS {1, 0}
68#define CONFIG_PHY_BASE_ADR 0x08
69#endif
70
71/*
72 * USB/EHCI
73 */
74#ifdef CONFIG_CMD_USB
75#define CONFIG_USB_EHCI
76#define CONFIG_USB_EHCI_KIRKWOOD
77#define CONFIG_EHCI_IS_TDI
78#define CONFIG_USB_STORAGE
79#endif
80
81/*
82 * Environment variables configurations
83 */
84#ifdef CONFIG_CMD_NAND
85#define CONFIG_ENV_IS_IN_NAND
86#define CONFIG_ENV_SECT_SIZE 0x20000
87#else
88#define CONFIG_ENV_IS_NOWHERE
89#endif
90
91#define CONFIG_ENV_SIZE 0x20000
92#define CONFIG_ENV_ADDR 0x80000
93#define CONFIG_ENV_OFFSET 0x80000
94
95/*
96 * Default environment variables
97 */
98#define CONFIG_BOOTCOMMAND "nand read 0x800000 kernel 0x300000; bootm;"
99#define CONFIG_MTDPARTS "512K(u-boot),512K(u-boot-env),3M(kernel),-(root)"
100#define CONFIG_EXTRA_ENV_SETTINGS \
101 "update_uboot=dhcp u-boot.kwb; nand erase.part u-boot; nand write ${fileaddr} u-boot ${filesize}\0" \
102 "update_kernel=dhcp uImage-tk71; nand erase.part kernel; nand write ${fileaddr} kernel ${filesize} \0" \
103 "update_rootfs=dhcp rootfs-tk71; nand erase.part root; nand write ${fileaddr} root ${filesize}\0" \
104 "update_all=run update_uboot; run update_kernel; run update_rootfs; reset\0" \
105 "mtdids=nand0=orion_nand\0" \
106 "mtdparts=mtdparts=orion_nand:"CONFIG_MTDPARTS"\0" \
107 "bootargs=console=ttyS0,115200 mtdparts=orion_nand:"CONFIG_MTDPARTS" rootfstype=jffs2 root=/dev/mtdblock3 rw\0"
108#define MTDIDS_DEFAULT "nand0=orion_nand"
109#define MTDPARTS_DEFAULT "mtdparts=orion_nand:"CONFIG_MTDPARTS
110
111#define PHYS_SDRAM_1 0x00000000 /* Base address */
112#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
113
114#endif /* __CONFIG_TK71_H__ */