1. 27a0f03 net: link_local: Fix netmask endianness bug by Alexandre Messier · 8 years ago
  2. 5c624b9 net: fix cache misaligned issue in Broadcom SF2 driver by Suji Velupillai · 8 years ago
  3. ec7aa8f board: ge: bx50v3: apply the proper register setting to fix the voltage peak issue by Yung-Ching LIN · 8 years ago
  4. d42db16 board: ge: bx50v3: fix AR8033 reset timing issue by Yung-Ching LIN · 8 years ago
  5. 625cf50 net: sunxi: Enable eeprom on OLinuXino Lime boards by oliver@schinagl.nl · 8 years ago
  6. ace1520 net: sunxi-emac: Write HW address via function by oliver@schinagl.nl · 8 years ago
  7. 5cf618e Merge git://git.denx.de/u-boot-arc by Tom Rini · 8 years ago
  8. 3daa7c7 arc: use timer driver for ARC boards by Vlad Zakharov · 8 years ago
  9. 0c77092 arc: dts: separate single axs10x.dts file by Vlad Zakharov · 8 years ago
  10. c1daa40 Merge git://www.denx.de/git/u-boot-marvell by Tom Rini · 8 years ago
  11. ad9b5f7 drivers: timer: Introduce ARC timer driver by Vlad Zakharov · 8 years ago
  12. d0ffda8 Merge git://git.denx.de/u-boot-dm by Tom Rini · 8 years ago
  13. 6008326 arm: mvebu: Add gdsys ControlCenter-Compact board by Dirk Eibach · 8 years ago
  14. 2a79275 dm: Add callback to modify the device tree by mario.six@gdsys.cc · 8 years ago
  15. 1ec2a80 arm: mvebu: theadorable: Add 'pcie' test command by Stefan Roese · 8 years ago
  16. 1304f4b arm: mvebu: theadorable: Add board-specific PEX detection pulse width by Stefan Roese · 8 years ago
  17. 2399e40 arm: mvebu: AXP: Add possiblity to configure PEX detection pulse width by Stefan Roese · 8 years ago
  18. d71e249 arm64: a37xx: Remove DM_I2C_COMPAT from the board config by Konstantin Porotchkin · 8 years ago
  19. 9566268 arm64: a37xx: Disable DB configurations on ESPRESSOBin board by Konstantin Porotchkin · 8 years ago
  20. 7c3105b arm64: mvebu: Add default config for ESPRESSOBin board by Konstantin Porotchkin · 8 years ago
  21. d1625a9 arm64: dts: Add device tree for ESPRESSOBin board by Konstantin Porotchkin · 8 years ago
  22. 16ad870 mvebu: a37xx: Add init for ESPRESSBin Topaz switch by Konstantin Porotchkin · 8 years ago
  23. 278d30c mvebu: neta: a37xx: Add fixed link support to neta driver by Konstantin Porotchkin · 8 years ago
  24. 976feda mvebu: neta: Add support for board init function by Konstantin Porotchkin · 8 years ago
  25. 81b7c7f arm64: a37xx: Handle pin controls in early board init by Konstantin Porotchkin · 8 years ago
  26. f7cab0f arm64: a37xx: dts: Add pin control nodes to DT by Konstantin Porotchkin · 8 years ago
  27. c19fe73 arm64: a37xx: Enable bubt command support on A3720-DB by Konstantin Porotchkin · 8 years ago
  28. a7a0d78 arm64: a37xx: Enable Marvell ETH PHY support by Konstantin Porotchkin · 8 years ago
  29. c5330ae arm64: mvebu: Rename the db-88f3720 to armada-37xx platform by Konstantin Porotchkin · 8 years ago
  30. 81192b7 mvebu: usb: xhci: Add VBUS regulator supply to the host driver by Konstantin Porotchkin · 8 years ago
  31. c106363 arm64: mvebu: Add default configuraton for MACCHIATOBin board by Konstantin Porotchkin · 8 years ago
  32. 94a6660 arm64: mvebu: dts: Add DTS file for MACCHIATOBin board by Rabeeh Khoury · 8 years ago
  33. 130b53e mvebu: pcie: Add support for GPIO reset for PCIe device by Konstantin Porotchkin · 8 years ago
  34. d9fb41a arm64: mvebu: dts: Add i2c1 pin definitions to CPM by Konstantin Porotchkin · 8 years ago
  35. 9eb3468 arm64: mvebu: gpio: Add GPIO nodes to A8K family devices by Konstantin Porotchkin · 8 years ago
  36. 55bc080 dtoc: make ScanTree recurse into subnodes by Philipp Tomsich · 8 years ago
  37. b06a381 drivers: ti_qspi: use syscon to get the address ctrl_mod_mmap register by Jean-Jacques Hiblot · 8 years ago
  38. 1804044 regmap: use fdt address translation by Jean-Jacques Hiblot · 8 years ago
  39. b0d9512 dm: core: Fix Handling of global_data moving in SPL by Lokesh Vutla · 8 years ago
  40. 5877d8f Merge branch 'master' of git://git.denx.de/u-boot-mmc by Tom Rini · 8 years ago
  41. de0359c mmc: xenon_sdhci: Add missing host->max_clk to Xenon SDHCI driver by Stefan Roese · 8 years ago
  42. 166c2b8 mmc: drop unnecessary send_status request by Xu Ziyuan · 8 years ago
  43. fa7720b mmc: sdhci: only flush cache for data command by Kevin Liu · 8 years ago
  44. 83b3248 mmc: tangier: Add Intel Tangier eMMC/SDHCI driver by Felipe Balbi · 8 years ago
  45. b706b1c mmc: pci: Add CONFIG_MMC_PCI by Felipe Balbi · 8 years ago
  46. 19c1c70 configs: am43xx_evm: Enable SPL_DM by Lokesh Vutla · 8 years ago
  47. 6a59845 ARM: AM43xx: Enable DM_I2C/SPI/ETH by Lokesh Vutla · 8 years ago
  48. edb1297 ARM: dts: am43xx: Add u-boot specific dtsi by Lokesh Vutla · 8 years ago
  49. 0a3f407 configs: dra7xx_evm: Enable SPL_DM by Lokesh Vutla · 8 years ago
  50. 881e7bc configs: am57xx_evm: Enable SPL_DM by Lokesh Vutla · 8 years ago
  51. 954b07e ARM: dts: OMAP5+: Add u-boot specific dtsi by Lokesh Vutla · 8 years ago
  52. 4d451c0 ARM: OMAP2+: define _image_binary_end to fix SPL_OF_CONTROL by Lokesh Vutla · 8 years ago
  53. cf334ed spl: Correct call to spl_common_init() with SPL_STACK_R_MALLOC_SIMPLE_LEN by Tom Rini · 8 years ago
  54. 274bced board: ns2: Add support for Broadcom Northstar 2 by Jon Mason · 8 years ago
  55. daa483d da850: Add instructions to copy AIS image to NAND by ahaslam@baylibre.com · 8 years ago
  56. e5caec9 Pass empty CFLAGS on invocation of libfdt/setup.py by Max Filippov · 8 years ago
  57. f4e9ff7 Kconfig: Don't use RSA_FREESCALE_EXP on IMX by George McCollister · 8 years ago
  58. a051a99 ARM: am43xx: fix SOC revision print outs by Tero Kristo · 8 years ago
  59. b28c5fc test-fit.py: Minor grammar/spelling/clarification tweaks by Robert P. J. Day · 8 years ago
  60. e7dd02e part_efi: document device-tree binding for part_efi configuration by Philipp Tomsich · 8 years ago
  61. 399f3af doc: move documentation for /config node into a separate file by Philipp Tomsich · 8 years ago
  62. 02e4353 part_efi: support padding between the GPT header and partition entries by Philipp Tomsich · 8 years ago
  63. ee6fdfa net: don't override ethernet address environment by Roger Quadros · 8 years ago
  64. 752a831 ARM: k2g: setup PRU ethernet MAC addresses by Roger Quadros · 8 years ago
  65. 66e04fb ARM: Use Kconfig for board EEPROM's I2C bus and chip address by Roger Quadros · 8 years ago
  66. fcb1852 board: ti: am57xx-idk: Auto detect LCD Panel by Nishanth Menon · 8 years ago
  67. 6291012 board: ti: am571x-idk: Update pinmux for ICSS2 Ethernet by Roger Quadros · 8 years ago
  68. 3761105 board: ti: am571x-idk: Support 6 port Ethernet or 4 port Ethernet with LCD by Roger Quadros · 8 years ago
  69. 38f719e ti: common: board_detect: commodify ethaddr environment setting code by Roger Quadros · 8 years ago
  70. a4562d0 ti_armv7_keystone2: Define scratch space in SRAM by Franklin S Cooper Jr · 8 years ago
  71. 6398928 ti: common: board_detect: Rename EEPROM scratch start macro by Lokesh Vutla · 8 years ago
  72. 080795b ARM: OMAP5+: GPIO: Add GPIO_TO_PIN() macro by Roger Quadros · 8 years ago
  73. 30719e2 travis-ci: Re-work i.MX6 jobs, clarify Freescale and AArch64 by Tom Rini · 8 years ago
  74. d5abcf9 ti: boot: Register the MMC controllers in SPL in the same way as in u-boot by Jean-Jacques Hiblot · 8 years ago
  75. 02ccab1 Merge branch 'master' of git://www.denx.de/git/u-boot-imx by Tom Rini · 8 years ago
  76. f40574e Kconfig: Migrate CONFIG_BAUDRATE by Philipp Tomsich · 8 years ago
  77. d883fcc imx: ventana: add EMMC configuration by Tim Harvey · 8 years ago
  78. 3e0a71c tools: imximage: add set bit command by Peng Fan · 8 years ago
  79. 7966b43 ARM: vf610: move to standard arch/board approach by Stefan Agner · 8 years ago
  80. f3a8546 imx: ventana: make SD3_VSELECT board specific by Tim Harvey · 8 years ago
  81. f938500 imx: ventana: make OTG VBUS power enable board specific by Tim Harvey · 8 years ago
  82. db1964c imx: ventana: fix hwconfig by Tim Harvey · 8 years ago
  83. 095968f imx: ventana: change name of rs232_en to indicate polarity by Tim Harvey · 8 years ago
  84. 79942c4 imx: ventana: use mmc_root in boot scripts by Tim Harvey · 8 years ago
  85. 65da5c3 imx: ventana: move mmc_init to common by Tim Harvey · 8 years ago
  86. f7d9fcd imx: ventana: config: add gzwrite support by Tim Harvey · 8 years ago
  87. ad68d7b imx: ventana: add additional DRAM configurations by Tim Harvey · 8 years ago
  88. 38045f5 colibri_imx7: split and resize firmware MTD partition by Stefan Agner · 8 years ago
  89. 6409570 colibri_imx7: use device-tree for MTD partitions by Stefan Agner · 8 years ago
  90. 05ed964 colibri_imx7: setup PMIC sleep mode configuration by Stefan Agner · 8 years ago
  91. 5a986df colibri_imx7: implement board level USB PHY mode by Stefan Agner · 8 years ago
  92. 9af131e colibri_imx7/colibri_imx6/apalis_imx6: limit bootm memory by Stefan Agner · 8 years ago
  93. 3b208e7 toradex apalis/colibri: add device tree overlay support by Stefan Agner · 8 years ago
  94. bf7d183 toradex apalis/colibri: use common USB product id fallback by Stefan Agner · 8 years ago
  95. 9b548bf mx7: Add 1.2GHz speed grade entry by Fabio Estevam · 8 years ago
  96. 60a07fb mx7: Fix the get_cpu_speed_grade_hz() return values by Fabio Estevam · 8 years ago
  97. 31b8a90 mx7: Fix speed grade entry by Fabio Estevam · 8 years ago
  98. b3cab81 arm: dts: imx6ul: add usbotg aliases by Sébastien Szymanski · 8 years ago
  99. 77f2929 arm: i.MX6UL: add Armadeus Systems OPOS6UL SoM and OPOS6ULDev carrier board by Sébastien Szymanski · 8 years ago
  100. 3a5d636 dm: imx: serial: add i.MX6UL support by Sébastien Szymanski · 8 years ago