audio: Kang audio HAL from amlogic yukawa device
Copied from device/amlogic/generic/hal/audio/ minus the
speaker equalizer filter file.
It is a generic and more feature rich HAL, plus it fixes
the occasional static noise we hear on db845c and PocoF1.
Removed the mixer control settings from qcom/init.qcom.rc
and added HDMI out mixer control in etc/mixer_paths.xml
to start with. ** Analog audio out is not tested yet. **
ToDo:
1. Fallback to Analog audio port if the monitor doesn't
support HDMI audio out.
2. Mic AEC support is integrated deep in this HAL, so I
didn't remove it. Might as well test and use that
feature on Pixel 3 and Poco F1. Same with speaker EQ,
though we may end up never using this equalizer
feature at all.
Signed-off-by: Amit Pundir <amit.pundir@linaro.org>
Change-Id: I85614abdd684ab67f405f4c0e48380668ade4e06
diff --git a/etc/audio_policy_configuration.xml b/etc/audio_policy_configuration.xml
index c94718e..fec99cc 100644
--- a/etc/audio_policy_configuration.xml
+++ b/etc/audio_policy_configuration.xml
@@ -1,5 +1,5 @@
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
-<!-- Copyright (C) 2015 The Android Open Source Project
+<!-- Copyright (C) 2019 The Android Open Source Project
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
@@ -15,15 +15,40 @@
-->
<audioPolicyConfiguration version="1.0" xmlns:xi="http://www.w3.org/2001/XInclude">
+ <!-- version section contains a “version” tag in the form “major.minor” e.g version=”1.0” -->
- <globalConfiguration speaker_drc_enabled="false"/>
+ <!-- Global configuration Decalaration -->
+ <globalConfiguration speaker_drc_enabled="true"/>
+
+ <!-- Modules section:
+ There is one section per audio HW module present on the platform.
+ Each module section will contains two mandatory tags for audio HAL “halVersion” and “name”.
+ The module names are the same as in current .conf file:
+ “primary”, “A2DP”, “remote_submix”, “USB”
+ Each module will contain the following sections:
+ “devicePorts”: a list of device descriptors for all input and output devices accessible via this
+ module.
+ This contains both permanently attached devices and removable devices.
+ “mixPorts”: listing all output and input streams exposed by the audio HAL
+ “routes”: list of possible connections between input and output devices or between stream and
+ devices.
+ "route": is defined by an attribute:
+ -"type": <mux|mix> means all sources are mutual exclusive (mux) or can be mixed (mix)
+ -"sink": the sink involved in this route
+ -"sources": all the sources than can be connected to the sink via vis route
+ “attachedDevices”: permanently attached devices.
+ The attachedDevices section is a list of devices names. The names correspond to device names
+ defined in <devicePorts> section.
+ “defaultOutputDevice”: device to be used by default when no policy rule applies
+ -->
<modules>
<!-- Primary Audio HAL -->
- <module name="primary" halVersion="2.0">
+ <module name="primary" halVersion="3.0">
<attachedDevices>
<item>Speaker</item>
<item>Built-In Mic</item>
+ <item>Echo Reference</item>
</attachedDevices>
<defaultOutputDevice>Speaker</defaultOutputDevice>
<mixPorts>
@@ -36,10 +61,17 @@
samplingRates="8000,11025,12000,16000,22050,24000,32000,44100,48000"
channelMasks="AUDIO_CHANNEL_IN_MONO"/>
</mixPort>
+ <mixPort name="echo reference" role="sink">
+ <profile name="echo_reference" format="AUDIO_FORMAT_PCM_32_BIT"
+ samplingRates="48000"
+ channelMasks="AUDIO_CHANNEL_IN_STEREO"/>
+ </mixPort>
</mixPorts>
<devicePorts>
<!-- Output devices declaration, i.e. Sink DEVICE PORT -->
- <devicePort tagName="Speaker" role="sink" type="AUDIO_DEVICE_OUT_SPEAKER">
+ <devicePort tagName="Speaker" role="sink" type="AUDIO_DEVICE_OUT_SPEAKER" address="">
+ <profile name="" format="AUDIO_FORMAT_PCM_16_BIT"
+ samplingRates="48000" channelMasks="AUDIO_CHANNEL_OUT_STEREO"/>
</devicePort>
<devicePort tagName="Wired Headset" type="AUDIO_DEVICE_OUT_WIRED_HEADSET" role="sink">
</devicePort>
@@ -49,10 +81,6 @@
</devicePort>
<devicePort tagName="BT SCO Headset" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_HEADSET" role="sink">
</devicePort>
- <devicePort tagName="BT SCO Car Kit" type="AUDIO_DEVICE_OUT_BLUETOOTH_SCO_CARKIT" role="sink">
- </devicePort>
- <devicePort tagName="Aux Digital" type="AUDIO_DEVICE_OUT_AUX_DIGITAL" role="sink">
- </devicePort>
<devicePort tagName="Built-In Mic" type="AUDIO_DEVICE_IN_BUILTIN_MIC" role="source">
</devicePort>
@@ -60,6 +88,11 @@
</devicePort>
<devicePort tagName="BT SCO Headset Mic" type="AUDIO_DEVICE_IN_BLUETOOTH_SCO_HEADSET" role="source">
</devicePort>
+ <devicePort tagName="Echo Reference" type="AUDIO_DEVICE_IN_ECHO_REFERENCE" role="source">
+ <profile name="echo_reference" format="AUDIO_FORMAT_PCM_32_BIT"
+ samplingRates="48000"
+ channelMasks="AUDIO_CHANNEL_IN_STEREO"/>
+ </devicePort>
</devicePorts>
<!-- route declaration, i.e. list all available sources for a given sink -->
<routes>
@@ -69,16 +102,14 @@
sources="primary output"/>
<route type="mix" sink="Wired Headphones"
sources="primary output"/>
- <route type="mix" sink="Aux Digital"
- sources="primary output"/>
<route type="mix" sink="BT SCO"
sources="primary output"/>
<route type="mix" sink="BT SCO Headset"
sources="primary output"/>
- <route type="mix" sink="BT SCO Car Kit"
- sources="primary output"/>
<route type="mix" sink="primary input"
sources="Built-In Mic,Wired Headset Mic,BT SCO Headset Mic"/>
+ <route type="mix" sink="echo reference"
+ sources="Echo Reference"/>
</routes>
</module>
diff --git a/etc/mixer_paths.xml b/etc/mixer_paths.xml
new file mode 100644
index 0000000..dc28741
--- /dev/null
+++ b/etc/mixer_paths.xml
@@ -0,0 +1,5 @@
+<?xml version="1.0" encoding="ISO-8859-1"?>
+<mixer>
+ <!-- Enable HDMI out -->
+ <ctl name="QUAT_MI2S_RX Audio Mixer MultiMedia1" value="1" />
+</mixer>