| /** @file | |
| TCP protocol header file. | |
| Copyright (c) 2009 - 2012, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php. | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef _TCP_PROTO_H_ | |
| #define _TCP_PROTO_H_ | |
| /// | |
| /// Tcp states don't change their order. It is used as an | |
| /// index to mTcpOutFlag and other macros. | |
| /// | |
| #define TCP_CLOSED 0 | |
| #define TCP_LISTEN 1 | |
| #define TCP_SYN_SENT 2 | |
| #define TCP_SYN_RCVD 3 | |
| #define TCP_ESTABLISHED 4 | |
| #define TCP_FIN_WAIT_1 5 | |
| #define TCP_FIN_WAIT_2 6 | |
| #define TCP_CLOSING 7 | |
| #define TCP_TIME_WAIT 8 | |
| #define TCP_CLOSE_WAIT 9 | |
| #define TCP_LAST_ACK 10 | |
| /// | |
| /// Flags in the TCP header | |
| /// | |
| #define TCP_FLG_FIN 0x01 | |
| #define TCP_FLG_SYN 0x02 | |
| #define TCP_FLG_RST 0x04 | |
| #define TCP_FLG_PSH 0x08 | |
| #define TCP_FLG_ACK 0x10 | |
| #define TCP_FLG_URG 0x20 | |
| // | |
| // mask for all the flags | |
| // | |
| #define TCP_FLG_FLAG 0x3F | |
| #define TCP_CONNECT_REFUSED (-1) ///< TCP error status | |
| #define TCP_CONNECT_RESET (-2) ///< TCP error status | |
| #define TCP_CONNECT_CLOSED (-3) ///< TCP error status | |
| // | |
| // Current congestion status as suggested by RFC3782. | |
| // | |
| #define TCP_CONGEST_RECOVER 1 ///< During the NewReno fast recovery. | |
| #define TCP_CONGEST_LOSS 2 ///< Retxmit because of retxmit time out. | |
| #define TCP_CONGEST_OPEN 3 ///< TCP is opening its congestion window. | |
| // | |
| // TCP control flags | |
| // | |
| #define TCP_CTRL_NO_NAGLE 0x0001 ///< Disable Nagle algorithm | |
| #define TCP_CTRL_NO_KEEPALIVE 0x0002 ///< Disable keepalive timer. | |
| #define TCP_CTRL_NO_WS 0x0004 ///< Disable window scale option. | |
| #define TCP_CTRL_RCVD_WS 0x0008 ///< Received a wnd scale option in syn. | |
| #define TCP_CTRL_NO_TS 0x0010 ///< Disable Timestamp option. | |
| #define TCP_CTRL_RCVD_TS 0x0020 ///< Received a Timestamp option in syn. | |
| #define TCP_CTRL_SND_TS 0x0040 ///< Send Timestamp option to remote. | |
| #define TCP_CTRL_SND_URG 0x0080 ///< In urgent send mode. | |
| #define TCP_CTRL_RCVD_URG 0x0100 ///< In urgent receive mode. | |
| #define TCP_CTRL_SND_PSH 0x0200 ///< In PUSH send mode. | |
| #define TCP_CTRL_FIN_SENT 0x0400 ///< FIN is sent. | |
| #define TCP_CTRL_FIN_ACKED 0x0800 ///< FIN is ACKed. | |
| #define TCP_CTRL_TIMER_ON 0x1000 ///< At least one of the timer is on. | |
| #define TCP_CTRL_RTT_ON 0x2000 ///< The RTT measurement is on. | |
| #define TCP_CTRL_ACK_NOW 0x4000 ///< Send the ACK now, don't delay. | |
| // | |
| // Timer related values | |
| // | |
| #define TCP_TIMER_CONNECT 0 ///< Connection establishment timer. | |
| #define TCP_TIMER_REXMIT 1 ///< Retransmit timer. | |
| #define TCP_TIMER_PROBE 2 ///< Window probe timer. | |
| #define TCP_TIMER_KEEPALIVE 3 ///< Keepalive timer. | |
| #define TCP_TIMER_FINWAIT2 4 ///< FIN_WAIT_2 timer. | |
| #define TCP_TIMER_2MSL 5 ///< TIME_WAIT timer. | |
| #define TCP_TIMER_NUMBER 6 ///< The total number of the TCP timer. | |
| #define TCP_TICK 200 ///< Every TCP tick is 200ms. | |
| #define TCP_TICK_HZ 5 ///< The frequence of TCP tick. | |
| #define TCP_RTT_SHIFT 3 ///< SRTT & RTTVAR scaled by 8. | |
| #define TCP_RTO_MIN TCP_TICK_HZ ///< The minium value of RTO. | |
| #define TCP_RTO_MAX (TCP_TICK_HZ * 60) ///< The maxium value of RTO. | |
| #define TCP_FOLD_RTT 4 ///< Timeout threshod to fold RTT. | |
| // | |
| // Default values for some timers | |
| // | |
| #define TCP_MAX_LOSS 12 ///< Default max times to retxmit. | |
| #define TCP_KEEPALIVE_IDLE_MIN (TCP_TICK_HZ * 60 * 60 * 2) ///< First keepalive. | |
| #define TCP_KEEPALIVE_PERIOD (TCP_TICK_HZ * 60) | |
| #define TCP_MAX_KEEPALIVE 8 | |
| #define TCP_FIN_WAIT2_TIME (2 * TCP_TICK_HZ) | |
| #define TCP_TIME_WAIT_TIME (2 * TCP_TICK_HZ) | |
| #define TCP_PAWS_24DAY (24 * 24 * 60 * 60 * TCP_TICK_HZ) | |
| #define TCP_CONNECT_TIME (75 * TCP_TICK_HZ) | |
| // | |
| // The header space to be reserved before TCP data to accomodate : | |
| // 60byte IP head + 60byte TCP head + link layer head | |
| // | |
| #define TCP_MAX_HEAD 192 | |
| // | |
| // Value ranges for some control option | |
| // | |
| #define TCP_RCV_BUF_SIZE (2 * 1024 * 1024) | |
| #define TCP_RCV_BUF_SIZE_MIN (8 * 1024) | |
| #define TCP_SND_BUF_SIZE (2 * 1024 * 1024) | |
| #define TCP_SND_BUF_SIZE_MIN (8 * 1024) | |
| #define TCP_BACKLOG 10 | |
| #define TCP_BACKLOG_MIN 5 | |
| #define TCP_MAX_LOSS_MIN 6 | |
| #define TCP_CONNECT_TIME_MIN (60 * TCP_TICK_HZ) | |
| #define TCP_MAX_KEEPALIVE_MIN 4 | |
| #define TCP_KEEPALIVE_IDLE_MAX (TCP_TICK_HZ * 60 * 60 * 4) | |
| #define TCP_KEEPALIVE_PERIOD_MIN (TCP_TICK_HZ * 30) | |
| #define TCP_FIN_WAIT2_TIME_MAX (4 * TCP_TICK_HZ) | |
| #define TCP_TIME_WAIT_TIME_MAX (60 * TCP_TICK_HZ) | |
| /// | |
| /// TCP_CONNECTED: both ends have synchronized their ISN. | |
| /// | |
| #define TCP_CONNECTED(state) ((state) > TCP_SYN_RCVD) | |
| #define TCP_FIN_RCVD(State) \ | |
| ( \ | |
| ((State) == TCP_CLOSE_WAIT) || \ | |
| ((State) == TCP_LAST_ACK) || \ | |
| ((State) == TCP_CLOSING) || \ | |
| ((State) == TCP_TIME_WAIT) \ | |
| ) | |
| #define TCP_LOCAL_CLOSED(State) \ | |
| ( \ | |
| ((State) == TCP_FIN_WAIT_1) || \ | |
| ((State) == TCP_FIN_WAIT_2) || \ | |
| ((State) == TCP_CLOSING) || \ | |
| ((State) == TCP_TIME_WAIT) || \ | |
| ((State) == TCP_LAST_ACK) \ | |
| ) | |
| // | |
| // Get the TCP_SEG point from a net buffer's ProtoData. | |
| // | |
| #define TCPSEG_NETBUF(NBuf) ((TCP_SEG *) ((NBuf)->ProtoData)) | |
| // | |
| // Macros to compare sequence no | |
| // | |
| #define TCP_SEQ_LT(SeqA, SeqB) ((INT32) ((SeqA) - (SeqB)) < 0) | |
| #define TCP_SEQ_LEQ(SeqA, SeqB) ((INT32) ((SeqA) - (SeqB)) <= 0) | |
| #define TCP_SEQ_GT(SeqA, SeqB) ((INT32) ((SeqB) - (SeqA)) < 0) | |
| #define TCP_SEQ_GEQ(SeqA, SeqB) ((INT32) ((SeqB) - (SeqA)) <= 0) | |
| // | |
| // TCP_SEQ_BETWEEN return whether b <= m <= e | |
| // | |
| #define TCP_SEQ_BETWEEN(b, m, e) ((e) - (b) >= (m) - (b)) | |
| // | |
| // TCP_SUB_SEQ returns Seq1 - Seq2. Make sure Seq1 >= Seq2 | |
| // | |
| #define TCP_SUB_SEQ(Seq1, Seq2) ((UINT32) ((Seq1) - (Seq2))) | |
| // | |
| // Check whether Flag is on | |
| // | |
| #define TCP_FLG_ON(Value, Flag) ((BOOLEAN) (((Value) & (Flag)) != 0)) | |
| // | |
| // Set and Clear operation on a Flag | |
| // | |
| #define TCP_SET_FLG(Value, Flag) ((Value) |= (Flag)) | |
| #define TCP_CLEAR_FLG(Value, Flag) ((Value) &= ~(Flag)) | |
| // | |
| // Test whether two peers are equal | |
| // | |
| #define TCP_PEER_EQUAL(Pa, Pb, Ver) \ | |
| (((Pa)->Port == (Pb)->Port) && TcpIsIpEqual(&((Pa)->Ip), &((Pb)->Ip), Ver)) | |
| // | |
| // Test whether Pa matches Pb, or Pa is more specific | |
| // than pb. Zero means wildcard. | |
| // | |
| #define TCP_PEER_MATCH(Pa, Pb, Ver) \ | |
| ( \ | |
| (((Pb)->Port == 0) || ((Pb)->Port == (Pa)->Port)) && \ | |
| (TcpIsIpZero (&((Pb)->Ip), Ver) || TcpIsIpEqual (&((Pb)->Ip), &((Pa)->Ip), Ver)) \ | |
| ) | |
| #define TCP_TIMER_ON(Flag, Timer) ((Flag) & (1 << (Timer))) | |
| #define TCP_SET_TIMER(Flag, Timer) ((Flag) = (UINT16) ((Flag) | (1 << (Timer)))) | |
| #define TCP_CLEAR_TIMER(Flag, Timer) ((Flag) = (UINT16) ((Flag) & (~(1 << (Timer))))) | |
| #define TCP_TIME_LT(Ta, Tb) ((INT32) ((Ta) - (Tb)) < 0) | |
| #define TCP_TIME_LEQ(Ta, Tb) ((INT32) ((Ta) - (Tb)) <= 0) | |
| #define TCP_SUB_TIME(Ta, Tb) ((UINT32) ((Ta) - (Tb))) | |
| #define TCP_MAX_WIN 0xFFFFU | |
| /// | |
| /// TCP segmentation data. | |
| /// | |
| typedef struct _TCP_SEG { | |
| TCP_SEQNO Seq; ///< Starting sequence number. | |
| TCP_SEQNO End; ///< The sequence of the last byte + 1, include SYN/FIN. End-Seq = SEG.LEN. | |
| TCP_SEQNO Ack; ///< ACK field in the segment. | |
| UINT8 Flag; ///< TCP header flags. | |
| UINT16 Urg; ///< Valid if URG flag is set. | |
| UINT32 Wnd; ///< TCP window size field. | |
| } TCP_SEG; | |
| /// | |
| /// Network endpoint, IP plus Port structure. | |
| /// | |
| typedef struct _TCP_PEER { | |
| EFI_IP_ADDRESS Ip; ///< IP address, in network byte order. | |
| TCP_PORTNO Port; ///< Port number, in network byte order. | |
| } TCP_PEER; | |
| typedef struct _TCP_CONTROL_BLOCK TCP_CB; | |
| /// | |
| /// TCP control block: it includes various states. | |
| /// | |
| struct _TCP_CONTROL_BLOCK { | |
| LIST_ENTRY List; ///< Back and forward link entry | |
| TCP_CB *Parent; ///< The parent TCP_CB structure | |
| SOCKET *Sk; ///< The socket it controled. | |
| TCP_PEER LocalEnd; ///< Local endpoint. | |
| TCP_PEER RemoteEnd;///< Remote endpoint. | |
| LIST_ENTRY SndQue; ///< Retxmission queue. | |
| LIST_ENTRY RcvQue; ///< Reassemble queue. | |
| UINT32 CtrlFlag; ///< Control flags, such as NO_NAGLE. | |
| INT32 Error; ///< Soft error status, such as TCP_CONNECT_RESET. | |
| // | |
| // RFC793 and RFC1122 defined variables | |
| // | |
| UINT8 State; ///< TCP state, such as SYN_SENT, LISTEN. | |
| UINT8 DelayedAck; ///< Number of delayed ACKs. | |
| UINT16 HeadSum; ///< Checksum of the fixed parts of pesudo | |
| ///< header: Src IP, Dst IP, 0, Protocol, | |
| ///< do not include the TCP length. | |
| TCP_SEQNO Iss; ///< Initial Sending Sequence. | |
| TCP_SEQNO SndUna; ///< First unacknowledged data. | |
| TCP_SEQNO SndNxt; ///< Next data sequence to send. | |
| TCP_SEQNO SndPsh; ///< Send PUSH point. | |
| TCP_SEQNO SndUp; ///< Send urgent point. | |
| UINT32 SndWnd; ///< Window advertised by the remote peer. | |
| UINT32 SndWndMax; ///< Max send window advertised by the peer. | |
| TCP_SEQNO SndWl1; ///< Seq number used for last window update. | |
| TCP_SEQNO SndWl2; ///< Ack no of last window update. | |
| UINT16 SndMss; ///< Max send segment size. | |
| TCP_SEQNO RcvNxt; ///< Next sequence no to receive. | |
| UINT32 RcvWnd; ///< Window advertised by the local peer. | |
| TCP_SEQNO RcvWl2; ///< The RcvNxt (or ACK) of last window update. | |
| ///< It is necessary because of delayed ACK. | |
| TCP_SEQNO RcvUp; ///< Urgent point; | |
| TCP_SEQNO Irs; ///< Initial Receiving Sequence. | |
| UINT16 RcvMss; ///< Max receive segment size. | |
| UINT16 EnabledTimer; ///< Which timer is currently enabled. | |
| UINT32 Timer[TCP_TIMER_NUMBER]; ///< When the timer will expire. | |
| INT32 NextExpire; ///< Countdown offset for the nearest timer. | |
| UINT32 Idle; ///< How long the connection is in idle. | |
| UINT32 ProbeTime; ///< The time out value for current window prober. | |
| BOOLEAN ProbeTimerOn;///< If TRUE, the probe time is on. | |
| // | |
| // RFC1323 defined variables, about window scale, | |
| // timestamp and PAWS | |
| // | |
| UINT8 SndWndScale; ///< Wndscale received from the peer. | |
| UINT8 RcvWndScale; ///< Wndscale used to scale local buffer. | |
| UINT32 TsRecent; ///< TsRecent to echo to the remote peer. | |
| UINT32 TsRecentAge; ///< When this TsRecent is updated. | |
| // | |
| // RFC2988 defined variables. about RTT measurement | |
| // | |
| TCP_SEQNO RttSeq; ///< The seq of measured segment now. | |
| UINT32 RttMeasure; ///< Currently measured RTT in heartbeats. | |
| UINT32 SRtt; ///< Smoothed RTT, scaled by 8. | |
| UINT32 RttVar; ///< RTT variance, scaled by 8. | |
| UINT32 Rto; ///< Current RTO, not scaled. | |
| // | |
| // RFC2581, and 3782 variables. | |
| // Congestion control + NewReno fast recovery. | |
| // | |
| UINT32 CWnd; ///< Sender's congestion window. | |
| UINT32 Ssthresh; ///< Slow start threshold. | |
| TCP_SEQNO Recover; ///< Recover point for NewReno. | |
| UINT16 DupAck; ///< Number of duplicate ACKs. | |
| UINT8 CongestState; ///< The current congestion state(RFC3782). | |
| UINT8 LossTimes; ///< Number of retxmit timeouts in a row. | |
| TCP_SEQNO LossRecover; ///< Recover point for retxmit. | |
| // | |
| // configuration parameters, for EFI_TCP4_PROTOCOL specification | |
| // | |
| UINT32 KeepAliveIdle; ///< Idle time before sending first probe. | |
| UINT32 KeepAlivePeriod; ///< Interval for subsequent keep alive probe. | |
| UINT8 MaxKeepAlive; ///< Maxium keep alive probe times. | |
| UINT8 KeepAliveProbes; ///< The number of keep alive probe. | |
| UINT16 MaxRexmit; ///< The maxium number of retxmit before abort. | |
| UINT32 FinWait2Timeout; ///< The FIN_WAIT_2 timeout. | |
| UINT32 TimeWaitTimeout; ///< The TIME_WAIT timeout. | |
| UINT32 ConnectTimeout; ///< The connect establishment timeout. | |
| // | |
| // configuration for tcp provided by user | |
| // | |
| BOOLEAN UseDefaultAddr; | |
| UINT8 Tos; | |
| UINT8 Ttl; | |
| EFI_IPv4_ADDRESS SubnetMask; | |
| BOOLEAN RemoteIpZero; ///< RemoteEnd.Ip is ZERO when configured. | |
| IP_IO_IP_INFO *IpInfo; ///< Pointer reference to Ip used to send pkt | |
| UINT32 Tick; ///< 1 tick = 200ms | |
| }; | |
| #endif |