uefi/linaro-edk2/NetworkPkg/Udp6Dxe/Udp6Driver.h - device/linaro/hikey960 - Gitiles

 /** @file
   Driver Binding functions and Service Binding functions for the Network driver module.

   Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>

   This program and the accompanying materials
   are licensed and made available under the terms and conditions of the BSD License
   which accompanies this distribution.  The full text of the license may be found at
   http://opensource.org/licenses/bsd-license.php.

   THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
   WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

 **/

 #ifndef _UDP6_DRIVER_H_
 #define _UDP6_DRIVER_H_

 #include <Protocol/DriverBinding.h>
 #include <Protocol/ServiceBinding.h>
 #include <Protocol/DevicePath.h>

 /**
   Tests to see if this driver supports a given controller. If a child device is provided,
   it further tests to see if this driver supports creating a handle for the specified child device.

   This function checks to see if the driver specified by This supports the device specified by
   ControllerHandle. Drivers typically use the device path attached to
   ControllerHandle and/or the services from the bus I/O abstraction attached to
   ControllerHandle to determine if the driver supports ControllerHandle. This function
   may be called many times during platform initialization. In order to reduce boot times, the tests
   performed by this function must be very small, and take as little time as possible to execute. This
   function must not change the state of any hardware devices, and this function must be aware that the
   device specified by ControllerHandle may already be managed by the same driver or a
   different driver. This function must match its calls to AllocatePages() with FreePages(),
   AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
   Since ControllerHandle may have been previously started by the same driver, if a protocol is
   already in the opened state, then it must not be closed with CloseProtocol(). This is required
   to guarantee the state of ControllerHandle is not modified by this function.

   @param[in]  This                 A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
   @param[in]  ControllerHandle     The handle of the controller to test. This handle
                                    must support a protocol interface that supplies
                                    an I/O abstraction to the driver.
   @param[in]  RemainingDevicePath  A pointer to the remaining portion of a device path.  This
                                    parameter is ignored by device drivers, and is optional for bus
                                    drivers. For bus drivers, if this parameter is not NULL, then
                                    the bus driver must determine if the bus controller specified
                                    by ControllerHandle and the child controller specified
                                    by RemainingDevicePath are both supported by this
                                    bus driver.

   @retval EFI_SUCCESS              The device specified by ControllerHandle and
                                    RemainingDevicePath is supported by the driver specified by This.
   @retval EFI_ALREADY_STARTED      The device specified by ControllerHandle and
                                    RemainingDevicePath is already being managed by the driver
                                    specified by This.
   @retval EFI_ACCESS_DENIED        The device specified by ControllerHandle and
                                    RemainingDevicePath is already being managed by a different
                                    driver or an application that requires exclusive access.
                                    Currently not implemented.
   @retval EFI_UNSUPPORTED          The device specified by ControllerHandle and
                                    RemainingDevicePath is not supported by the driver specified by This.
 **/
 EFI_STATUS
 EFIAPI
 Udp6DriverBindingSupported (
   IN EFI_DRIVER_BINDING_PROTOCOL  *This,
   IN EFI_HANDLE                   ControllerHandle,
   IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath  OPTIONAL
   );

 /**
   Start this driver on ControllerHandle.

   This service is called by the  EFI boot service ConnectController(). In order to make
   drivers as small as possible, there are a few calling restrictions for
   this service. ConnectController() must follow these
   calling restrictions. If any other agent wishes to call Start() it
   must also follow these calling restrictions.

   @param[in]  This                   Protocol instance pointer.
   @param[in]  ControllerHandle       Handle of device to bind a driver to.
   @param[in]  RemainingDevicePath    Optional parameter use to pick a specific child
                                      device to start.

   @retval EFI_SUCCES             This driver is added to ControllerHandle.
   @retval EFI_OUT_OF_RESOURCES   The required system resource can't be allocated.
   @retval other                  This driver does not support this device.

 **/
 EFI_STATUS
 EFIAPI
 Udp6DriverBindingStart (
   IN EFI_DRIVER_BINDING_PROTOCOL  *This,
   IN EFI_HANDLE                   ControllerHandle,
   IN EFI_DEVICE_PATH_PROTOCOL     *RemainingDevicePath  OPTIONAL
   );

 /**
   Stop this driver on ControllerHandle.

   This service is called by the  EFI boot service DisconnectController(). In order to
   make drivers as small as possible, there are a few calling
   restrictions for this service. DisconnectController()
   must follow these calling restrictions. If any other agent wishes
   to call Stop(), it must also follow these calling restrictions.

   @param[in]  This                   Protocol instance pointer.
   @param[in]  ControllerHandle       Handle of device to stop the driver on.
   @param[in]  NumberOfChildren       Number of Handles in ChildHandleBuffer. If number
                                      of children is zero, stop the entire bus driver.
   @param[in]  ChildHandleBuffer      List of Child Handles to Stop. It is optional.

   @retval EFI_SUCCESS            This driver removed ControllerHandle.
   @retval EFI_DEVICE_ERROR       Can't find the NicHandle from the ControllerHandle and specified GUID.
   @retval other                  This driver was not removed from this device.

 **/
 EFI_STATUS
 EFIAPI
 Udp6DriverBindingStop (
   IN  EFI_DRIVER_BINDING_PROTOCOL  *This,
   IN  EFI_HANDLE                   ControllerHandle,
   IN  UINTN                        NumberOfChildren,
   IN  EFI_HANDLE                   *ChildHandleBuffer OPTIONAL
   );

 /**
   Creates a child handle and installs a protocol.

   The CreateChild() function installs a protocol on ChildHandle.
   If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
   If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.

   @param[in]       This        Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
   @param[in, out]  ChildHandle Pointer to the handle of the child to create. If it is NULL,
                                then a new handle is created. If it is a pointer to an existing UEFI handle,
                                then the protocol is added to the existing UEFI handle.

   @retval EFI_SUCCES            The protocol was added to ChildHandle.
   @retval EFI_INVALID_PARAMETER This is NULL or ChildHandle is NULL.
   @retval EFI_OUT_OF_RESOURCES  There are not enough resources availabe to create
                                 the child.
   @retval other                 The child handle was not created.

 **/
 EFI_STATUS
 EFIAPI
 Udp6ServiceBindingCreateChild (
   IN EFI_SERVICE_BINDING_PROTOCOL  *This,
   IN OUT EFI_HANDLE                *ChildHandle
   );

 /**
   Destroys a child handle with a set of I/O services.
   The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
   that was installed by CreateChild() from ChildHandle. If the removed protocol is the
   last protocol on ChildHandle, then ChildHandle is destroyed.

   @param[in]  This               Protocol instance pointer.
   @param[in]  ChildHandle        Handle of the child to destroy.

   @retval EFI_SUCCES             The I/O services were removed from the child
                                  handle.
   @retval EFI_UNSUPPORTED        The child handle does not support the I/O services
                                  that are being removed.
   @retval EFI_INVALID_PARAMETER  Child handle is NULL.
   @retval EFI_ACCESS_DENIED      The child handle could not be destroyed because
                                  its I/O services are being used.
   @retval other                  The child handle was not destroyed.

 **/
 EFI_STATUS
 EFIAPI
 Udp6ServiceBindingDestroyChild (
   IN EFI_SERVICE_BINDING_PROTOCOL  *This,
   IN EFI_HANDLE                    ChildHandle
   );

 #endif
	/** @file
	Driver Binding functions and Service Binding functions for the Network driver module.

	Copyright (c) 2009 - 2011, Intel Corporation. All rights reserved.<BR>

	This program and the accompanying materials
	are licensed and made available under the terms and conditions of the BSD License
	which accompanies this distribution. The full text of the license may be found at
	http://opensource.org/licenses/bsd-license.php.

	THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
	WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.

	**/

	#ifndef _UDP6_DRIVER_H_
	#define _UDP6_DRIVER_H_

	#include <Protocol/DriverBinding.h>
	#include <Protocol/ServiceBinding.h>
	#include <Protocol/DevicePath.h>

	/**
	Tests to see if this driver supports a given controller. If a child device is provided,
	it further tests to see if this driver supports creating a handle for the specified child device.

	This function checks to see if the driver specified by This supports the device specified by
	ControllerHandle. Drivers typically use the device path attached to
	ControllerHandle and/or the services from the bus I/O abstraction attached to
	ControllerHandle to determine if the driver supports ControllerHandle. This function
	may be called many times during platform initialization. In order to reduce boot times, the tests
	performed by this function must be very small, and take as little time as possible to execute. This
	function must not change the state of any hardware devices, and this function must be aware that the
	device specified by ControllerHandle may already be managed by the same driver or a
	different driver. This function must match its calls to AllocatePages() with FreePages(),
	AllocatePool() with FreePool(), and OpenProtocol() with CloseProtocol().
	Since ControllerHandle may have been previously started by the same driver, if a protocol is
	already in the opened state, then it must not be closed with CloseProtocol(). This is required
	to guarantee the state of ControllerHandle is not modified by this function.

	@param[in] This A pointer to the EFI_DRIVER_BINDING_PROTOCOL instance.
	@param[in] ControllerHandle The handle of the controller to test. This handle
	must support a protocol interface that supplies
	an I/O abstraction to the driver.
	@param[in] RemainingDevicePath A pointer to the remaining portion of a device path. This
	parameter is ignored by device drivers, and is optional for bus
	drivers. For bus drivers, if this parameter is not NULL, then
	the bus driver must determine if the bus controller specified
	by ControllerHandle and the child controller specified
	by RemainingDevicePath are both supported by this
	bus driver.

	@retval EFI_SUCCESS The device specified by ControllerHandle and
	RemainingDevicePath is supported by the driver specified by This.
	@retval EFI_ALREADY_STARTED The device specified by ControllerHandle and
	RemainingDevicePath is already being managed by the driver
	specified by This.
	@retval EFI_ACCESS_DENIED The device specified by ControllerHandle and
	RemainingDevicePath is already being managed by a different
	driver or an application that requires exclusive access.
	Currently not implemented.
	@retval EFI_UNSUPPORTED The device specified by ControllerHandle and
	RemainingDevicePath is not supported by the driver specified by This.
	**/
	EFI_STATUS
	EFIAPI
	Udp6DriverBindingSupported (
	IN EFI_DRIVER_BINDING_PROTOCOL *This,
	IN EFI_HANDLE ControllerHandle,
	IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
	);

	/**
	Start this driver on ControllerHandle.

	This service is called by the EFI boot service ConnectController(). In order to make
	drivers as small as possible, there are a few calling restrictions for
	this service. ConnectController() must follow these
	calling restrictions. If any other agent wishes to call Start() it
	must also follow these calling restrictions.

	@param[in] This Protocol instance pointer.
	@param[in] ControllerHandle Handle of device to bind a driver to.
	@param[in] RemainingDevicePath Optional parameter use to pick a specific child
	device to start.

	@retval EFI_SUCCES This driver is added to ControllerHandle.
	@retval EFI_OUT_OF_RESOURCES The required system resource can't be allocated.
	@retval other This driver does not support this device.

	**/
	EFI_STATUS
	EFIAPI
	Udp6DriverBindingStart (
	IN EFI_DRIVER_BINDING_PROTOCOL *This,
	IN EFI_HANDLE ControllerHandle,
	IN EFI_DEVICE_PATH_PROTOCOL *RemainingDevicePath OPTIONAL
	);

	/**
	Stop this driver on ControllerHandle.

	This service is called by the EFI boot service DisconnectController(). In order to
	make drivers as small as possible, there are a few calling
	restrictions for this service. DisconnectController()
	must follow these calling restrictions. If any other agent wishes
	to call Stop(), it must also follow these calling restrictions.

	@param[in] This Protocol instance pointer.
	@param[in] ControllerHandle Handle of device to stop the driver on.
	@param[in] NumberOfChildren Number of Handles in ChildHandleBuffer. If number
	of children is zero, stop the entire bus driver.
	@param[in] ChildHandleBuffer List of Child Handles to Stop. It is optional.

	@retval EFI_SUCCESS This driver removed ControllerHandle.
	@retval EFI_DEVICE_ERROR Can't find the NicHandle from the ControllerHandle and specified GUID.
	@retval other This driver was not removed from this device.

	**/
	EFI_STATUS
	EFIAPI
	Udp6DriverBindingStop (
	IN EFI_DRIVER_BINDING_PROTOCOL *This,
	IN EFI_HANDLE ControllerHandle,
	IN UINTN NumberOfChildren,
	IN EFI_HANDLE *ChildHandleBuffer OPTIONAL
	);

	/**
	Creates a child handle and installs a protocol.

	The CreateChild() function installs a protocol on ChildHandle.
	If ChildHandle is a pointer to NULL, then a new handle is created and returned in ChildHandle.
	If ChildHandle is not a pointer to NULL, then the protocol installs on the existing ChildHandle.

	@param[in] This Pointer to the EFI_SERVICE_BINDING_PROTOCOL instance.
	@param[in, out] ChildHandle Pointer to the handle of the child to create. If it is NULL,
	then a new handle is created. If it is a pointer to an existing UEFI handle,
	then the protocol is added to the existing UEFI handle.

	@retval EFI_SUCCES The protocol was added to ChildHandle.
	@retval EFI_INVALID_PARAMETER This is NULL or ChildHandle is NULL.
	@retval EFI_OUT_OF_RESOURCES There are not enough resources availabe to create
	the child.
	@retval other The child handle was not created.

	**/
	EFI_STATUS
	EFIAPI
	Udp6ServiceBindingCreateChild (
	IN EFI_SERVICE_BINDING_PROTOCOL *This,
	IN OUT EFI_HANDLE *ChildHandle
	);

	/**
	Destroys a child handle with a set of I/O services.
	The DestroyChild() function does the opposite of CreateChild(). It removes a protocol
	that was installed by CreateChild() from ChildHandle. If the removed protocol is the
	last protocol on ChildHandle, then ChildHandle is destroyed.

	@param[in] This Protocol instance pointer.
	@param[in] ChildHandle Handle of the child to destroy.

	@retval EFI_SUCCES The I/O services were removed from the child
	handle.
	@retval EFI_UNSUPPORTED The child handle does not support the I/O services
	that are being removed.
	@retval EFI_INVALID_PARAMETER Child handle is NULL.
	@retval EFI_ACCESS_DENIED The child handle could not be destroyed because
	its I/O services are being used.
	@retval other The child handle was not destroyed.

	**/
	EFI_STATUS
	EFIAPI
	Udp6ServiceBindingDestroyChild (
	IN EFI_SERVICE_BINDING_PROTOCOL *This,
	IN EFI_HANDLE ChildHandle
	);

	#endif