| /** @file | |
| Transfer protocol defintions used by debug agent and host. It is only | |
| intended to be used by Debug related module implementation. | |
| Copyright (c) 2010 - 2015, Intel Corporation. All rights reserved.<BR> | |
| This program and the accompanying materials | |
| are licensed and made available under the terms and conditions of the BSD License | |
| which accompanies this distribution. The full text of the license may be found at | |
| http://opensource.org/licenses/bsd-license.php. | |
| THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, | |
| WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. | |
| **/ | |
| #ifndef __TRANSFER_PROTOCOL_H__ | |
| #define __TRANSFER_PROTOCOL_H__ | |
| #include "ProcessorContext.h" | |
| // | |
| // Current revision of transfer protocol | |
| // 0.4: Packet compression and decompression. | |
| // | |
| #define DEBUG_AGENT_REVISION_03 ((0 << 16) | 03) | |
| #define DEBUG_AGENT_REVISION_04 ((0 << 16) | 04) | |
| #define DEBUG_AGENT_REVISION DEBUG_AGENT_REVISION_03 | |
| #define DEBUG_AGENT_CAPABILITIES 0 | |
| // | |
| // Definitions for the (A)ttach command | |
| // | |
| #define DEBUG_STARTING_SYMBOL_ATTACH (0xFA) | |
| // | |
| // Definition for starting symbol of a normal debug packet. Choose a non-ASCII to avoid conflict with other serial output. | |
| // | |
| #define DEBUG_STARTING_SYMBOL_NORMAL (0xFE) | |
| // | |
| // Definition for starting symbol of a (C)ompressed debug packet. Choose a non-ASCII to avoid conflict with other serial output. | |
| // | |
| #define DEBUG_STARTING_SYMBOL_COMPRESS (0xFC) | |
| #pragma pack(1) | |
| // | |
| // Definition for debug packet header for debug packets (not including attach command) | |
| // | |
| typedef struct { | |
| UINT8 StartSymbol; | |
| UINT8 Command; | |
| UINT8 Length; // Length of Debug Packet including header and payload in byte | |
| UINT8 SequenceNo; | |
| UINT16 Crc; | |
| } DEBUG_PACKET_HEADER; | |
| // | |
| // Definition for Command field for debug packets | |
| // | |
| #define DEBUG_COMMAND_REQUEST (0 << 7) | |
| #define DEBUG_COMMAND_RESPONSE (1 << 7) | |
| #define IS_REQUEST(x) (((x)->Command & DEBUG_COMMAND_RESPONSE) == 0) | |
| // | |
| // HOST initiated commands | |
| // | |
| #define DEBUG_COMMAND_RESET (DEBUG_COMMAND_REQUEST | 0x00) | |
| #define DEBUG_COMMAND_GO (DEBUG_COMMAND_REQUEST | 0x01) | |
| #define DEBUG_COMMAND_BREAK_CAUSE (DEBUG_COMMAND_REQUEST | 0x02) | |
| #define DEBUG_COMMAND_SET_HW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 0x03) | |
| #define DEBUG_COMMAND_CLEAR_HW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 0x04) | |
| #define DEBUG_COMMAND_SINGLE_STEPPING (DEBUG_COMMAND_REQUEST | 0x05) | |
| #define DEBUG_COMMAND_SET_SW_BREAKPOINT (DEBUG_COMMAND_REQUEST | 0x06) | |
| #define DEBUG_COMMAND_READ_MEMORY (DEBUG_COMMAND_REQUEST | 0x07) | |
| #define DEBUG_COMMAND_WRITE_MEMORY (DEBUG_COMMAND_REQUEST | 0x08) | |
| #define DEBUG_COMMAND_READ_IO (DEBUG_COMMAND_REQUEST | 0x09) | |
| #define DEBUG_COMMAND_WRITE_IO (DEBUG_COMMAND_REQUEST | 0x0A) | |
| #define DEBUG_COMMAND_READ_REGISTER (DEBUG_COMMAND_REQUEST | 0x0B) | |
| #define DEBUG_COMMAND_WRITE_REGISTER (DEBUG_COMMAND_REQUEST | 0x0C) | |
| #define DEBUG_COMMAND_READ_ALL_REGISTERS (DEBUG_COMMAND_REQUEST | 0x0D) | |
| #define DEBUG_COMMAND_ARCH_MODE (DEBUG_COMMAND_REQUEST | 0x0E) | |
| #define DEBUG_COMMAND_READ_MSR (DEBUG_COMMAND_REQUEST | 0x0F) | |
| #define DEBUG_COMMAND_WRITE_MSR (DEBUG_COMMAND_REQUEST | 0x10) | |
| #define DEBUG_COMMAND_SET_DEBUG_SETTING (DEBUG_COMMAND_REQUEST | 0x11) | |
| #define DEBUG_COMMAND_GET_REVISION (DEBUG_COMMAND_REQUEST | 0x12) | |
| #define DEBUG_COMMAND_GET_EXCEPTION (DEBUG_COMMAND_REQUEST | 0x13) | |
| #define DEBUG_COMMAND_SET_VIEWPOINT (DEBUG_COMMAND_REQUEST | 0x14) | |
| #define DEBUG_COMMAND_GET_VIEWPOINT (DEBUG_COMMAND_REQUEST | 0x15) | |
| #define DEBUG_COMMAND_DETACH (DEBUG_COMMAND_REQUEST | 0x16) | |
| #define DEBUG_COMMAND_CPUID (DEBUG_COMMAND_REQUEST | 0x17) | |
| #define DEBUG_COMMAND_SEARCH_SIGNATURE (DEBUG_COMMAND_REQUEST | 0x18) | |
| #define DEBUG_COMMAND_HALT (DEBUG_COMMAND_REQUEST | 0x19) | |
| // | |
| // TARGET initiated commands | |
| // | |
| #define DEBUG_COMMAND_INIT_BREAK (DEBUG_COMMAND_REQUEST | 0x3F) | |
| #define DEBUG_COMMAND_BREAK_POINT (DEBUG_COMMAND_REQUEST | 0x3E) | |
| #define DEBUG_COMMAND_MEMORY_READY (DEBUG_COMMAND_REQUEST | 0x3D) | |
| #define DEBUG_COMMAND_PRINT_MESSAGE (DEBUG_COMMAND_REQUEST | 0x3C) | |
| #define DEBUG_COMMAND_ATTACH_BREAK (DEBUG_COMMAND_REQUEST | 0x3B) | |
| // | |
| // Response commands | |
| // | |
| #define DEBUG_COMMAND_OK (DEBUG_COMMAND_RESPONSE | 0x00) | |
| #define DEBUG_COMMAND_RESEND (DEBUG_COMMAND_RESPONSE | 0x01) | |
| #define DEBUG_COMMAND_ABORT (DEBUG_COMMAND_RESPONSE | 0x02) | |
| // | |
| // The below 2 commands are used when transferring big data (like > ~250 bytes). | |
| // The sequence is: | |
| // HOST TARGET | |
| // Request => | |
| // <= IN_PROGRESS with partial data | |
| // CONTINUE => | |
| // (could have multiple IN_PROGRESS and CONTINUE interactions) | |
| // <= OK with the last part of data | |
| // OK (no data as ACK) => | |
| // | |
| #define DEBUG_COMMAND_IN_PROGRESS (DEBUG_COMMAND_RESPONSE | 0x03) | |
| #define DEBUG_COMMAND_CONTINUE (DEBUG_COMMAND_RESPONSE | 0x04) | |
| // | |
| // The below 2 commands are used to support deferred halt: | |
| // TARGET returns HALT_DEFERRED when it receives a HALT request in inter-active mode. | |
| // TARGET returns HALT_PROCESSED when it receives a GO request and has a pending HALT request. | |
| // | |
| #define DEBUG_COMMAND_HALT_DEFERRED (DEBUG_COMMAND_RESPONSE | 0x05) | |
| #define DEBUG_COMMAND_HALT_PROCESSED (DEBUG_COMMAND_RESPONSE | 0x06) | |
| #define DEBUG_COMMAND_TIMEOUT (DEBUG_COMMAND_RESPONSE | 0x07) | |
| #define DEBUG_COMMAND_NOT_SUPPORTED (DEBUG_COMMAND_RESPONSE | 0x0F) | |
| // | |
| // Definition for data field for debug packets | |
| // | |
| #define DEBUG_DATA_UPPER_LIMIT 0xff // Upper limit for the data size, by the limit of the packet header definition. | |
| #define DEBUG_DATA_MAXIMUM_REAL_DATA (DEBUG_DATA_UPPER_LIMIT - sizeof (DEBUG_PACKET_HEADER)) | |
| // | |
| // Response data for DEBUG_COMMAND_BREAK_CAUSE | |
| // | |
| typedef struct { | |
| UINT8 Cause; | |
| UINT64 StopAddress; | |
| } DEBUG_DATA_RESPONSE_BREAK_CAUSE; | |
| // | |
| // Break type defintions for DEBUG_DATA_BREAK_CAUSE | |
| // | |
| #define DEBUG_DATA_BREAK_CAUSE_UNKNOWN 0 | |
| #define DEBUG_DATA_BREAK_CAUSE_HW_BREAKPOINT 1 | |
| #define DEBUG_DATA_BREAK_CAUSE_STEPPING 2 | |
| #define DEBUG_DATA_BREAK_CAUSE_SW_BREAKPOINT 3 | |
| #define DEBUG_DATA_BREAK_CAUSE_USER_HALT 4 | |
| #define DEBUG_DATA_BREAK_CAUSE_IMAGE_LOAD 5 | |
| #define DEBUG_DATA_BREAK_CAUSE_IMAGE_UNLOAD 6 | |
| #define DEBUG_DATA_BREAK_CAUSE_SYSTEM_RESET 7 | |
| #define DEBUG_DATA_BREAK_CAUSE_EXCEPTION 8 | |
| #define DEBUG_DATA_BREAK_CAUSE_MEMORY_READY 9 | |
| // | |
| // Response data for DEBUG_COMMAND_ARCH_MODE, defined as SOFT_DEBUGGER_PROCESSOR_... | |
| // | |
| typedef struct { | |
| UINT8 CpuMode; | |
| } DEBUG_DATA_RESPONSE_ARCH_MODE; | |
| // | |
| // Cpu architecture defintions for DEBUG_DATA_RESPONSE_ARCH_MODE | |
| // | |
| #define DEBUG_DATA_BREAK_CPU_ARCH_IA16 0 | |
| #define DEBUG_DATA_BREAK_CPU_ARCH_IA32 1 | |
| #define DEBUG_DATA_BREAK_CPU_ARCH_X64 2 | |
| typedef struct { | |
| UINT8 Length:2; // Refer to below DEBUG_DATA_BREAKPOINT_LENGTH_XX macros | |
| UINT8 Access:2; // Refer to below DEBUG_DATA_BREAKPOINT_ACCESS_XX macros | |
| UINT8 Index:2; // Index of debug register | |
| UINT8 Reserved:2; | |
| } DEBUG_DATA_BREAKPOINT_TYPE; | |
| #define DEBUG_DATA_BREAKPOINT_MEMORY_ACCESS (0x3) | |
| #define DEBUG_DATA_BREAKPOINT_IO_ACCESS (0x2) | |
| #define DEBUG_DATA_BREAKPOINT_MEMORY_WRITE (0x1) | |
| #define DEBUG_DATA_BREAKPOINT_MEMORY_EXECUTE (0x0) | |
| #define DEBUG_DATA_BREAKPOINT_LENGTH_32 (0x3) | |
| #define DEBUG_DATA_BREAKPOINT_LENGTH_64 (0x2) | |
| #define DEBUG_DATA_BREAKPOINT_LENGTH_16 (0x1) | |
| #define DEBUG_DATA_BREAKPOINT_LENGTH_8 (0x0) | |
| // | |
| // Request data for DEBUG_COMMAND_SET_HW_BREAKPOINT | |
| // | |
| typedef struct { | |
| DEBUG_DATA_BREAKPOINT_TYPE Type; | |
| UINT64 Address; | |
| } DEBUG_DATA_SET_HW_BREAKPOINT; | |
| // | |
| // Request data for DEBUG_COMMAND_CLEAR_HW_BREAKPOINT | |
| // | |
| typedef struct { | |
| UINT8 IndexMask; // 0x0f will clear all hw breakpoints | |
| } DEBUG_DATA_CLEAR_HW_BREAKPOINT; | |
| // | |
| // Request and response data for DEBUG_COMMAND_SET_SW_BREAKPOINT | |
| // | |
| typedef struct { | |
| UINT64 Address; | |
| } DEBUG_DATA_SET_SW_BREAKPOINT; | |
| typedef struct { | |
| UINT8 OriginalData; | |
| } DEBUG_DATA_RESPONSE_SET_SW_BREAKPOINT; | |
| // | |
| // Request data for DEBUG_COMMAND_READ_MEMORY | |
| // | |
| typedef struct { | |
| UINT64 Address; | |
| UINT8 Width; | |
| UINT16 Count; | |
| } DEBUG_DATA_READ_MEMORY; | |
| // | |
| // Request data for DEBUG_COMMAND_WRITE_MEMORY | |
| // | |
| typedef struct { | |
| UINT64 Address; | |
| UINT8 Width; | |
| UINT16 Count; | |
| UINT8 Data[1]; // The actual length is (Width * Count) | |
| } DEBUG_DATA_WRITE_MEMORY; | |
| // | |
| // Request and response data for DEBUG_COMMAND_READ_IO | |
| // | |
| typedef struct { | |
| UINT64 Port; | |
| UINT8 Width; | |
| } DEBUG_DATA_READ_IO; | |
| typedef struct { | |
| UINT8 Data[1]; // The actual length depends on the packet header | |
| } DEBUG_DATA_RESPONSE_READ_IO; | |
| // | |
| // Request data for DEBUG_COMMAND_WRITE_IO | |
| // | |
| typedef struct { | |
| UINT64 Port; | |
| UINT8 Width; | |
| UINT8 Data[1]; // The actual length is Width | |
| } DEBUG_DATA_WRITE_IO; | |
| // | |
| // Request data for DEBUG_COMMAND_READ_REGISTER | |
| // | |
| typedef struct { | |
| UINT8 Index; // defined as SOFT_DEBUGGER_REGISTER_XX | |
| } DEBUG_DATA_READ_REGISTER; | |
| // | |
| // Request data for DEBUG_COMMAND_WRITE_REGISTER | |
| // | |
| typedef struct { | |
| UINT8 Index; // defined as SOFT_DEBUGGER_REGISTER_XX | |
| UINT8 Length; | |
| UINT8 Data[1]; // The actual length is Length | |
| } DEBUG_DATA_WRITE_REGISTER; | |
| // | |
| // Request and response data for DEBUG_COMMAND_READ_MSR | |
| // | |
| typedef struct { | |
| UINT32 Index; | |
| } DEBUG_DATA_READ_MSR; | |
| typedef struct { | |
| UINT64 Value; | |
| } DEBUG_DATA_RESPONSE_READ_MSR; | |
| // | |
| // Request data for DEBUG_COMMAND_WRITE_MSR | |
| // | |
| typedef struct { | |
| UINT32 Index; | |
| UINT64 Value; | |
| } DEBUG_DATA_WRITE_MSR; | |
| // | |
| // Response data for DEBUG_COMMAND_GET_REVISION | |
| // | |
| typedef struct { | |
| UINT32 Revision; | |
| UINT32 Capabilities; | |
| } DEBUG_DATA_RESPONSE_GET_REVISION; | |
| // | |
| // Response data for DEBUG_COMMAND_GET_EXCEPTION | |
| // | |
| typedef struct { | |
| UINT8 ExceptionNum; | |
| UINT32 ExceptionData; | |
| } DEBUG_DATA_RESPONSE_GET_EXCEPTION; | |
| // | |
| // Request data for DEBUG_DATA_SET_DEBUG_SETTING | |
| // | |
| typedef struct { | |
| UINT8 Key; | |
| UINT8 Value; | |
| } DEBUG_DATA_SET_DEBUG_SETTING; | |
| // | |
| // Supported keys | |
| // | |
| #define DEBUG_AGENT_SETTING_SMM_ENTRY_BREAK 1 | |
| #define DEBUG_AGENT_SETTING_PRINT_ERROR_LEVEL 2 | |
| #define DEBUG_AGENT_SETTING_BOOT_SCRIPT_ENTRY_BREAK 3 | |
| // | |
| // Bitmask of print error level for debug message | |
| // | |
| #define DEBUG_AGENT_ERROR BIT0 | |
| #define DEBUG_AGENT_WARNING BIT1 | |
| #define DEBUG_AGENT_INFO BIT2 | |
| #define DEBUG_AGENT_VERBOSE BIT3 | |
| // | |
| // Request data for DEBUG_COMMAND_SET_VIEWPOINT | |
| // | |
| typedef struct { | |
| UINT32 ViewPoint; // The index of viewpoint will be set | |
| } DEBUG_DATA_SET_VIEWPOINT; | |
| // | |
| // Response data for DEBUG_COMMAND_GET_VIEWPOINT | |
| // | |
| typedef struct { | |
| UINT32 ViewPoint; // The index of viewpoint will be returned | |
| } DEBUG_DATA_RESPONSE_GET_VIEWPOINT; | |
| // | |
| // Request and response data for DEBUG_COMMAND_CPUID | |
| // | |
| typedef struct { | |
| UINT32 Eax; // The value of EAX prior to invoking the CPUID instruction | |
| UINT32 Ecx; // The value of ECX prior to invoking the CPUID instruction | |
| } DEBUG_DATA_CPUID; | |
| typedef struct { | |
| UINT32 Eax; // The value of EAX returned by the CPUID instruction | |
| UINT32 Ebx; // The value of EBX returned by the CPUID instruction | |
| UINT32 Ecx; // The value of ECX returned by the CPUID instruction | |
| UINT32 Edx; // The value of EDX returned by the CPUID instruction | |
| } DEBUG_DATA_RESPONSE_CPUID; | |
| // | |
| // Request and response data for DEBUG_COMMAND_SEARCH_SIGNATURE | |
| // | |
| typedef struct { | |
| UINT64 Start; | |
| UINT32 Count; | |
| UINT32 Alignment; | |
| BOOLEAN Positive; // TRUE to search in higher address memory | |
| UINT8 DataLength; | |
| UINT8 Data[1]; | |
| } DEBUG_DATA_SEARCH_SIGNATURE; | |
| typedef struct { | |
| UINT64 Address; // -1 indicates not found | |
| } DEBUG_DATA_RESPONSE_SEARCH_SIGNATURE; | |
| #pragma pack() | |
| #endif | |