HiKey960: Integrate ARM's reference gralloc for mali bifrost

This integrates the BX304L01B-SW-99005-r4p0-01rel0
mali bifrost package from ARM available here:
 https://developer.arm.com/products/software/mali-drivers/android-gralloc-module

Change-Id: I737bce784d21d1a870229a16bcddd3668738405a
Signed-off-by: John Stultz <john.stultz@linaro.org>
diff --git a/gralloc960/gralloc_module.cpp b/gralloc960/gralloc_module.cpp
new file mode 100644
index 0000000..232ecc1
--- /dev/null
+++ b/gralloc960/gralloc_module.cpp
@@ -0,0 +1,341 @@
+/*
+ * Copyright (C) 2010 ARM Limited. All rights reserved.
+ *
+ * Copyright (C) 2008 The Android Open Source Project
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * You may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *      http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <errno.h>
+#include <pthread.h>
+#include <inttypes.h>
+
+#include <cutils/log.h>
+#include <cutils/atomic.h>
+#include <hardware/hardware.h>
+#include <hardware/gralloc.h>
+
+#include "gralloc_priv.h"
+#include "gralloc_helper.h"
+#include "alloc_device.h"
+#include "framebuffer_device.h"
+
+#include "gralloc_module_allocator_specific.h"
+#include "gralloc_buffer_priv.h"
+
+#include "mali_gralloc_formats.h"
+
+static pthread_mutex_t s_map_lock = PTHREAD_MUTEX_INITIALIZER;
+
+static int gralloc_device_open(const hw_module_t* module, const char* name, hw_device_t** device)
+{
+	int status = -EINVAL;
+
+	if (!strncmp(name, GRALLOC_HARDWARE_GPU0, MALI_GRALLOC_HARDWARE_MAX_STR_LEN))
+	{
+		status = alloc_device_open(module, name, device);
+	}
+	else if (!strncmp(name, GRALLOC_HARDWARE_FB0, MALI_GRALLOC_HARDWARE_MAX_STR_LEN))
+	{
+		status = framebuffer_device_open(module, name, device);
+	}
+
+	return status;
+}
+
+static int gralloc_register_buffer(gralloc_module_t const* module, buffer_handle_t handle)
+{
+	GRALLOC_UNUSED(module);
+
+	if (private_handle_t::validate(handle) < 0)
+	{
+		AERR("Registering invalid buffer %p, returning error", handle);
+		return -EINVAL;
+	}
+
+	// if this handle was created in this process, then we keep it as is.
+	private_handle_t* hnd = (private_handle_t*)handle;
+
+	if (hnd->pid == getpid())
+	{
+		// If the handle is created and registered in the same process this is valid,
+		// but it could also be that application is registering twice which is illegal.
+		AWAR("Registering handle %p coming from the same process: %d.", hnd, hnd->pid);
+	}
+
+	int retval = -EINVAL;
+
+	pthread_mutex_lock(&s_map_lock);
+
+	hnd->pid = getpid();
+
+	if (hnd->flags & private_handle_t::PRIV_FLAGS_FRAMEBUFFER) 
+	{
+		AERR( "Can't register buffer %p as it is a framebuffer", handle );
+	}
+	else if (hnd->flags & private_handle_t::PRIV_FLAGS_USES_ION)
+	{
+		retval = gralloc_backend_register(hnd);
+	}
+	else
+	{
+		AERR("unknown buffer flags not supported. flags = %d", hnd->flags );
+	}
+
+	pthread_mutex_unlock(&s_map_lock);
+	return retval;
+}
+
+static int gralloc_unregister_buffer(gralloc_module_t const* module, buffer_handle_t handle)
+{
+	GRALLOC_UNUSED(module);
+
+	if (private_handle_t::validate(handle) < 0)
+	{
+		AERR("unregistering invalid buffer %p, returning error", handle);
+		return -EINVAL;
+	}
+
+	private_handle_t* hnd = (private_handle_t*)handle;
+
+	AERR_IF(hnd->lockState & private_handle_t::LOCK_STATE_READ_MASK, "[unregister] handle %p still locked (state=%08x)", hnd, hnd->lockState);
+
+	if (hnd->flags & private_handle_t::PRIV_FLAGS_FRAMEBUFFER)
+	{
+		AERR( "Can't unregister buffer %p as it is a framebuffer", handle );
+	}
+	else if (hnd->pid == getpid()) // never unmap buffers that were not created in this process
+	{
+		pthread_mutex_lock(&s_map_lock);
+
+		if (hnd->flags & private_handle_t::PRIV_FLAGS_USES_ION)
+		{
+			gralloc_backend_unregister(hnd);
+		}
+		else
+		{
+			AERR("Unregistering unknown buffer is not supported. Flags = %d", hnd->flags);
+		}
+
+		/*
+		 * Close shared attribute region file descriptor. It might seem strange to "free"
+		 * this here since this can happen in a client process, but free here is nothing
+		 * but unmapping and closing the duplicated file descriptor. The original ashmem
+		 * fd instance is still open until alloc_device_free() is called. Even sharing
+		 * of gralloc buffers within the same process should have fds dup:ed.
+		 */
+		gralloc_buffer_attr_free( hnd );
+
+		hnd->base = 0;
+		hnd->lockState  = 0;
+		hnd->writeOwner = 0;
+
+		pthread_mutex_unlock(&s_map_lock);
+	}
+	else
+	{
+		AERR( "Trying to unregister buffer %p from process %d that was not created in current process: %d", hnd, hnd->pid, getpid());
+	}
+
+	return 0;
+}
+
+static int gralloc_lock(gralloc_module_t const* module, buffer_handle_t handle, int usage, int l, int t, int w, int h, void** vaddr)
+{
+	GRALLOC_UNUSED(module);
+	GRALLOC_UNUSED(l);
+	GRALLOC_UNUSED(t);
+	GRALLOC_UNUSED(w);
+	GRALLOC_UNUSED(h);
+
+	if (private_handle_t::validate(handle) < 0)
+	{
+		AERR("Locking invalid buffer %p, returning error", handle );
+		return -EINVAL;
+	}
+
+	private_handle_t* hnd = (private_handle_t*)handle;
+
+	if (hnd->req_format == HAL_PIXEL_FORMAT_YCbCr_420_888)
+	{
+		AERR("Buffers with format YCbCr_420_888 must be locked using (*lock_ycbcr)" );
+		return -EINVAL;
+	}
+
+	if (hnd->flags & private_handle_t::PRIV_FLAGS_USES_ION)
+	{
+		hnd->writeOwner = usage & GRALLOC_USAGE_SW_WRITE_MASK;
+	}
+	if (usage & (GRALLOC_USAGE_SW_READ_MASK | GRALLOC_USAGE_SW_WRITE_MASK))
+	{
+		*vaddr = (void*)hnd->base;
+	}
+	return 0;
+}
+
+static int gralloc_lock_ycbcr(gralloc_module_t const* module, buffer_handle_t handle, int usage,
+                              int l, int t, int w, int h,
+                              android_ycbcr *ycbcr)
+{
+	GRALLOC_UNUSED(module);
+	GRALLOC_UNUSED(l);
+	GRALLOC_UNUSED(t);
+	GRALLOC_UNUSED(w);
+	GRALLOC_UNUSED(h);
+
+	if (private_handle_t::validate(handle) < 0)
+	{
+		AERR("Locking invalid buffer %p, returning error", handle );
+		return -EINVAL;
+	}
+
+	private_handle_t* hnd = (private_handle_t*)handle;
+
+	if (hnd->flags & private_handle_t::PRIV_FLAGS_USES_ION)
+	{
+		hnd->writeOwner = usage & GRALLOC_USAGE_SW_WRITE_MASK;
+	}
+	if (usage & (GRALLOC_USAGE_SW_READ_MASK | GRALLOC_USAGE_SW_WRITE_MASK) &&
+		!(hnd->internal_format & MALI_GRALLOC_INTFMT_EXT_MASK))
+	{
+		char* base = (char*)hnd->base;
+		int y_stride = hnd->byte_stride;
+		/* Ensure height is aligned for subsampled chroma before calculating buffer parameters */
+		int adjusted_height = GRALLOC_ALIGN(hnd->height, 2);
+		int y_size =  y_stride * adjusted_height;
+
+		int u_offset = 0;
+		int v_offset = 0;
+		int c_stride = 0;
+		int step = 0;
+
+		uint64_t base_format = hnd->internal_format & MALI_GRALLOC_INTFMT_FMT_MASK;
+
+		switch (base_format)
+		{
+			case MALI_GRALLOC_FORMAT_INTERNAL_NV12:
+				c_stride = y_stride;
+				/* Y plane, UV plane */
+				u_offset = y_size;
+				v_offset = y_size + 1;
+				step = 2;
+				break;
+
+			case MALI_GRALLOC_FORMAT_INTERNAL_NV21:
+				c_stride = y_stride;
+				/* Y plane, UV plane */
+				v_offset = y_size;
+				u_offset = y_size + 1;
+				step = 2;
+				break;
+
+			case MALI_GRALLOC_FORMAT_INTERNAL_YV12:
+			{
+				int c_size;
+
+				/* Stride alignment set to 16 as the SW access flags were set */
+				c_stride = GRALLOC_ALIGN(hnd->byte_stride / 2, 16);
+				c_size = c_stride * (adjusted_height / 2);
+				/* Y plane, V plane, U plane */
+				v_offset = y_size;
+				u_offset = y_size + c_size;
+				step = 1;
+				break;
+			}
+
+			default:
+				AERR("Can't lock buffer %p: wrong format %" PRIx64, hnd, hnd->internal_format);
+				return -EINVAL;
+		}
+
+		ycbcr->y = base;
+		ycbcr->cb = base + u_offset;
+		ycbcr->cr = base + v_offset;
+		ycbcr->ystride = y_stride;
+		ycbcr->cstride = c_stride;
+		ycbcr->chroma_step = step;
+	}
+	return 0;
+}
+
+static int gralloc_unlock(gralloc_module_t const* module, buffer_handle_t handle)
+{
+	GRALLOC_UNUSED(module);
+
+	if (private_handle_t::validate(handle) < 0)
+	{
+		AERR( "Unlocking invalid buffer %p, returning error", handle );
+		return -EINVAL;
+	}
+
+	private_handle_t* hnd = (private_handle_t*)handle;
+
+	if (hnd->flags & private_handle_t::PRIV_FLAGS_USES_ION && hnd->writeOwner)
+	{
+		gralloc_backend_sync(hnd);
+	}
+
+	return 0;
+}
+
+// There is one global instance of the module
+
+static struct hw_module_methods_t gralloc_module_methods =
+{
+	gralloc_device_open
+};
+
+private_module_t::private_module_t()
+{
+#define INIT_ZERO(obj) (memset(&(obj),0,sizeof((obj))))
+
+	base.common.tag = HARDWARE_MODULE_TAG;
+	base.common.version_major = 1;
+	base.common.version_minor = 0;
+	base.common.id = GRALLOC_HARDWARE_MODULE_ID;
+	base.common.name = "Graphics Memory Allocator Module";
+	base.common.author = "ARM Ltd.";
+	base.common.methods = &gralloc_module_methods;
+	base.common.dso = NULL;
+	INIT_ZERO(base.common.reserved);
+
+	base.registerBuffer = gralloc_register_buffer;
+	base.unregisterBuffer = gralloc_unregister_buffer;
+	base.lock = gralloc_lock;
+	base.lock_ycbcr = gralloc_lock_ycbcr;
+	base.unlock = gralloc_unlock;
+	base.perform = NULL;
+	INIT_ZERO(base.reserved_proc);
+
+	framebuffer = NULL;
+	flags = 0;
+	numBuffers = 0;
+	bufferMask = 0;
+	pthread_mutex_init(&(lock), NULL);
+	currentBuffer = NULL;
+	INIT_ZERO(info);
+	INIT_ZERO(finfo);
+	xdpi = 0.0f; 
+	ydpi = 0.0f; 
+	fps = 0.0f;
+	swapInterval = 1;
+
+#undef INIT_ZERO
+};
+
+/*
+ * HAL_MODULE_INFO_SYM will be initialized using the default constructor
+ * implemented above
+ */ 
+struct private_module_t HAL_MODULE_INFO_SYM;
+