hikey: Add UEFI sources for reference
UEFI needs to be built outside Android build system.
Please follow the instructions in README.
The sources correspond to:
https://github.com/96boards/edk2/commit/14eae0c12e71fd33c4c0fc51e4475e8db02566cf
https://github.com/96boards/arm-trusted-firmware/commit/e9b4909dcd75fc4ae7041cfb83d28ab9adb7afdf
https://github.com/96boards/l-loader/commit/6b784ad5c4ab00e2b1c6f53cd5f74054e5d00a78
https://git.linaro.org/uefi/uefi-tools.git/commit/abe618f8ab72034fff1ce46c9c006a2c6bd40a7e
Change-Id: Ieeefdb63e673e0c8e64e0a1f02c7bddc63b2c7fb
Signed-off-by: Vishal Bhoj <vishal.bhoj@linaro.org>
diff --git a/uefi/arm-trusted-firmware/plat/juno/scp_bootloader.c b/uefi/arm-trusted-firmware/plat/juno/scp_bootloader.c
new file mode 100644
index 0000000..a6d25d4
--- /dev/null
+++ b/uefi/arm-trusted-firmware/plat/juno/scp_bootloader.c
@@ -0,0 +1,153 @@
+/*
+ * Copyright (c) 2014, ARM Limited and Contributors. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this
+ * list of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice,
+ * this list of conditions and the following disclaimer in the documentation
+ * and/or other materials provided with the distribution.
+ *
+ * Neither the name of ARM nor the names of its contributors may be used
+ * to endorse or promote products derived from this software without specific
+ * prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arch_helpers.h>
+#include <platform.h>
+#include "juno_def.h"
+#include "mhu.h"
+#include "scp_bootloader.h"
+#include "scpi.h"
+
+/* Boot commands sent from AP -> SCP */
+#define BOOT_CMD_START 0x01
+#define BOOT_CMD_DATA 0x02
+
+typedef struct {
+ uint32_t image_size;
+} cmd_start_payload;
+
+typedef struct {
+ uint32_t sequence_num;
+ uint32_t offset;
+ uint32_t size;
+} cmd_data_payload;
+
+#define BOOT_DATA_MAX_SIZE 0x1000
+
+/* Boot commands sent from SCP -> AP */
+#define BOOT_CMD_ACK 0x03
+#define BOOT_CMD_NACK 0x04
+
+typedef struct {
+ uint32_t sequence_num;
+} cmd_ack_payload;
+
+/*
+ * Unlike the runtime protocol, the boot protocol uses the same memory region
+ * for both AP -> SCP and SCP -> AP transfers; define the address of this...
+ */
+static void * const cmd_payload = (void *)(MHU_SECURE_BASE + 0x0080);
+
+static void *scp_boot_message_start(void)
+{
+ mhu_secure_message_start();
+
+ return cmd_payload;
+}
+
+static void scp_boot_message_send(unsigned command, size_t size)
+{
+ /* Make sure payload can be seen by SCP */
+ if (MHU_PAYLOAD_CACHED)
+ flush_dcache_range((unsigned long)cmd_payload, size);
+
+ /* Send command to SCP */
+ mhu_secure_message_send(command | (size << 8));
+}
+
+static uint32_t scp_boot_message_wait(size_t size)
+{
+ uint32_t response = mhu_secure_message_wait();
+
+ /* Make sure we see the reply from the SCP and not any stale data */
+ if (MHU_PAYLOAD_CACHED)
+ inv_dcache_range((unsigned long)cmd_payload, size);
+
+ return response & 0xff;
+}
+
+static void scp_boot_message_end(void)
+{
+ mhu_secure_message_end();
+}
+
+static int transfer_block(uint32_t sequence_num, uint32_t offset, uint32_t size)
+{
+ cmd_data_payload *cmd_data = scp_boot_message_start();
+ cmd_data->sequence_num = sequence_num;
+ cmd_data->offset = offset;
+ cmd_data->size = size;
+
+ scp_boot_message_send(BOOT_CMD_DATA, sizeof(*cmd_data));
+
+ cmd_ack_payload *cmd_ack = cmd_payload;
+ int ok = scp_boot_message_wait(sizeof(*cmd_ack)) == BOOT_CMD_ACK
+ && cmd_ack->sequence_num == sequence_num;
+
+ scp_boot_message_end();
+
+ return ok;
+}
+
+int scp_bootloader_transfer(void *image, unsigned int image_size)
+{
+ uintptr_t offset = (uintptr_t)image - MHU_SECURE_BASE;
+ uintptr_t end = offset + image_size;
+ uint32_t response;
+
+ mhu_secure_init();
+
+ /* Initiate communications with SCP */
+ do {
+ cmd_start_payload *cmd_start = scp_boot_message_start();
+ cmd_start->image_size = image_size;
+
+ scp_boot_message_send(BOOT_CMD_START, sizeof(*cmd_start));
+
+ response = scp_boot_message_wait(0);
+
+ scp_boot_message_end();
+ } while (response != BOOT_CMD_ACK);
+
+ /* Transfer image to SCP a block at a time */
+ uint32_t sequence_num = 1;
+ size_t size;
+ while ((size = end - offset) != 0) {
+ if (size > BOOT_DATA_MAX_SIZE)
+ size = BOOT_DATA_MAX_SIZE;
+ while (!transfer_block(sequence_num, offset, size))
+ ; /* Retry forever */
+ offset += size;
+ sequence_num++;
+ }
+
+ /* Wait for SCP to signal it's ready */
+ return scpi_wait_ready();
+}